From owner-freebsd-hardware@FreeBSD.ORG Sun Mar 16 19:05:47 2008 Return-Path: Delivered-To: freebsd-hardware@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 4AA661065672 for ; Sun, 16 Mar 2008 19:05:47 +0000 (UTC) (envelope-from onemda@gmail.com) Received: from wf-out-1314.google.com (wf-out-1314.google.com [209.85.200.174]) by mx1.freebsd.org (Postfix) with ESMTP id BC14A8FC2F for ; Sun, 16 Mar 2008 19:05:46 +0000 (UTC) (envelope-from onemda@gmail.com) Received: by wf-out-1314.google.com with SMTP id 25so4841497wfa.7 for ; Sun, 16 Mar 2008 12:05:45 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=domainkey-signature:received:received:message-id:date:from:to:subject:cc:in-reply-to:mime-version:content-type:content-transfer-encoding:content-disposition:references; bh=G87xahSTLKc8LatbC/rbJtInMl8469JCAx9dL1TkJ6Q=; b=mGJt9CNJi5gfsqB8A1og5LcgvZskoik5s5fMrIOQUh2CLLqt4zBhPZ/qAPV5CVXiPNIFN4Tq5vxJ+2pLEAiZ0rbk9OtxGOE4r9dO3PfkfUh9VddgH72OkEH/hy/t2oNny4MZ8mELb8oIsqZ/SBDCfuJZruwrkDIbQVc7C3wGVlM= DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=message-id:date:from:to:subject:cc:in-reply-to:mime-version:content-type:content-transfer-encoding:content-disposition:references; b=s/8COlxDj1dz8nxB/+aEYcrbrRsA3/e/Vo0QBpc3G74PcvvpIQCVXpuvjREx9Iyjn/dW8xanta2d+X/Nq2vUX367NoABG7PW7z/chryd3goiQxz9ixjmpC0TY9SLFScBvjyeeVibvyhVjuVWtoU7jGEbd/wCoq7ctogtDeuarYA= Received: by 10.143.187.2 with SMTP id o2mr5654603wfp.162.1205694345427; Sun, 16 Mar 2008 12:05:45 -0700 (PDT) Received: by 10.142.178.11 with HTTP; Sun, 16 Mar 2008 12:05:45 -0700 (PDT) Message-ID: <3a142e750803161205q249b719fgfa7232be0c191572@mail.gmail.com> Date: Sun, 16 Mar 2008 20:05:45 +0100 From: "Paul B. Mahol" To: "KAYVEN RIESE" In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 7bit Content-Disposition: inline References: <3a142e750803141944y390fb3aai9263bb4c0bcb2104@mail.gmail.com> Cc: freebsd-hackers@freebsd.org, freeBSD hardware list Subject: Re: Failure to Project OOImpress X-BeenThere: freebsd-hardware@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: General discussion of FreeBSD hardware List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 16 Mar 2008 19:05:47 -0000 Dont hold me for this: but I remmeber that I read somewhere that if projector is connected before Xorg starts available resolutions to projector would be limited. So best is to disconnect and connect it again when Xorg is already running. Beware: I dont have experience with projectors with Xorg, only with seconds monitors but that is different story. I hope that there are somebody over there with more experience with projectors than me. On 3/15/08, KAYVEN RIESE wrote: > On Sat, 15 Mar 2008, Paul B. Mahol wrote: > > > Was it connected prior or after Xorg startup? > > I think we connected prior. Should we have? I had my > computer turned off, and I booted it up. The projector > was on during boot. I thought the boot process would > take care of it but it didn't. > > > > > On 3/14/08, KAYVEN RIESE wrote: > >> > >> > >> Couldn't connect to projector for presentation. > >> > >> I was supposed to give a class presentation and we tried to hook > >> my computer into the 15 pin female joint (sorry I forget what it is > >> called three rows of 5 pins each on the computer, hooking to 15 pins > >> on the wire) that I guess is usually a monitor connector. The professor > >> kept saying "hit function-f8" but that didn't go. > >> > >> I am running gnome on freeBSD > >> > >> [kayve@kv_bsd ~]$ uname -a > >> FreeBSD kv_bsd 6.2-RELEASE FreeBSD 6.2-RELEASE #0: Fri Jan 12 10:40:27 > UTC > >> 2007 root@dessler.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC i386 > >> [kayve@kv_bsd ~]$ > >> > >> > >> He said it was all about BIOS, but we were trying to hit func-f8 during > >> gnome running, so I thought > >> I would get a second opinion. > >> > >> Here is a link with pictures of the model decal: > >> > >> http://www.monkeyview.net/id/965/fsck/dmesg/index.vhtml > >> > >> *----------------------------------------------------------* > >> Kayven Riese, BSCS, MS (Physiology and Biophysics) > >> (415) 902 5513 cellular > >> http://kayve.net > >> Webmaster http://ChessYoga.org > >> *----------------------------------------------------------* > >> _______________________________________________ > >> freebsd-hackers@freebsd.org mailing list > >> http://lists.freebsd.org/mailman/listinfo/freebsd-hackers > >> To unsubscribe, send any mail to > "freebsd-hackers-unsubscribe@freebsd.org" > >> > > > > *----------------------------------------------------------* > Kayven Riese, BSCS, MS (Physiology and Biophysics) > (415) 902 5513 cellular > http://kayve.net > Webmaster http://ChessYoga.org > *----------------------------------------------------------* > From owner-freebsd-hardware@FreeBSD.ORG Sun Mar 16 20:44:59 2008 Return-Path: Delivered-To: freebsd-hardware@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 63574106566B; Sun, 16 Mar 2008 20:44:59 +0000 (UTC) (envelope-from jhary@unsane.co.uk) Received: from unsane.co.uk (unknown [IPv6:2001:470:1f08:110::2]) by mx1.freebsd.org (Postfix) with ESMTP id C65258FC19; Sun, 16 Mar 2008 20:44:58 +0000 (UTC) (envelope-from jhary@unsane.co.uk) Received: from crab.unsane.co.uk (crab.unsane.co.uk [10.0.0.111]) (authenticated bits=0) by unsane.co.uk (8.14.0/8.14.0) with ESMTP id m2GKjIQ2013314 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NO); Sun, 16 Mar 2008 20:45:19 GMT (envelope-from jhary@unsane.co.uk) Message-ID: <47DD85D2.3000801@unsane.co.uk> Date: Sun, 16 Mar 2008 20:40:50 +0000 From: Vince User-Agent: Thunderbird 2.0.0.12 (X11/20080313) MIME-Version: 1.0 To: "Paul B. Mahol" References: <3a142e750803141944y390fb3aai9263bb4c0bcb2104@mail.gmail.com> <3a142e750803161205q249b719fgfa7232be0c191572@mail.gmail.com> In-Reply-To: <3a142e750803161205q249b719fgfa7232be0c191572@mail.gmail.com> Content-Type: text/plain; charset=UTF-8; format=flowed Content-Transfer-Encoding: 7bit Cc: freebsd-hackers@freebsd.org, KAYVEN RIESE , freeBSD hardware list Subject: Re: Failure to Project OOImpress X-BeenThere: freebsd-hardware@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: General discussion of FreeBSD hardware List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 16 Mar 2008 20:44:59 -0000 I seem to recall I just had to play with xrandr to get an external monitor to work on my dell while my old Toshiba laptop used to need the function-f3 or f4 key pressing, but its not something i've done recently enough to remember the exact procedure for either. Vince Paul B. Mahol wrote: > Dont hold me for this: but I remmeber that I read somewhere that if > projector is connected before Xorg starts available resolutions to > projector would be limited. > So best is to disconnect and connect it again when Xorg is already running. > Beware: I dont have experience with projectors with Xorg, only with > seconds monitors but that is different story. > > I hope that there are somebody over there with more experience with > projectors than me. > > On 3/15/08, KAYVEN RIESE wrote: >> On Sat, 15 Mar 2008, Paul B. Mahol wrote: >> >>> Was it connected prior or after Xorg startup? >> I think we connected prior. Should we have? I had my >> computer turned off, and I booted it up. The projector >> was on during boot. I thought the boot process would >> take care of it but it didn't. >> >>> On 3/14/08, KAYVEN RIESE wrote: >>>> >>>> Couldn't connect to projector for presentation. >>>> >>>> I was supposed to give a class presentation and we tried to hook >>>> my computer into the 15 pin female joint (sorry I forget what it is >>>> called three rows of 5 pins each on the computer, hooking to 15 pins >>>> on the wire) that I guess is usually a monitor connector. The professor >>>> kept saying "hit function-f8" but that didn't go. >>>> >>>> I am running gnome on freeBSD >>>> >>>> [kayve@kv_bsd ~]$ uname -a >>>> FreeBSD kv_bsd 6.2-RELEASE FreeBSD 6.2-RELEASE #0: Fri Jan 12 10:40:27 >> UTC >>>> 2007 root@dessler.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC i386 >>>> [kayve@kv_bsd ~]$ >>>> >>>> >>>> He said it was all about BIOS, but we were trying to hit func-f8 during >>>> gnome running, so I thought >>>> I would get a second opinion. >>>> >>>> Here is a link with pictures of the model decal: >>>> >>>> http://www.monkeyview.net/id/965/fsck/dmesg/index.vhtml >>>> >>>> *----------------------------------------------------------* >>>> Kayven Riese, BSCS, MS (Physiology and Biophysics) >>>> (415) 902 5513 cellular >>>> http://kayve.net >>>> Webmaster http://ChessYoga.org >>>> *----------------------------------------------------------* >>>> _______________________________________________ >>>> freebsd-hackers@freebsd.org mailing list >>>> http://lists.freebsd.org/mailman/listinfo/freebsd-hackers >>>> To unsubscribe, send any mail to >> "freebsd-hackers-unsubscribe@freebsd.org" >> *----------------------------------------------------------* >> Kayven Riese, BSCS, MS (Physiology and Biophysics) >> (415) 902 5513 cellular >> http://kayve.net >> Webmaster http://ChessYoga.org >> *----------------------------------------------------------* >> > _______________________________________________ > freebsd-hackers@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-hackers > To unsubscribe, send any mail to "freebsd-hackers-unsubscribe@freebsd.org" From owner-freebsd-hardware@FreeBSD.ORG Mon Mar 17 08:11:04 2008 Return-Path: Delivered-To: freebsd-hardware@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id D4C901065671 for ; Mon, 17 Mar 2008 08:11:04 +0000 (UTC) (envelope-from rhomel.chinsio@gmail.com) Received: from wf-out-1314.google.com (wf-out-1314.google.com [209.85.200.175]) by mx1.freebsd.org (Postfix) with ESMTP id A2E288FC1B for ; Mon, 17 Mar 2008 08:11:04 +0000 (UTC) (envelope-from rhomel.chinsio@gmail.com) Received: by wf-out-1314.google.com with SMTP id 25so5114841wfa.7 for ; Mon, 17 Mar 2008 01:11:04 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=domainkey-signature:received:received:message-id:date:from:to:subject:mime-version:content-type; bh=kxh/3HaicXfsKS33/JWiTC9ArhXdCjwrg/juzijcpvg=; b=xVbJI49pAhiRlInhC29aop/juFcqAyPWbkMQULoZSHJDOoXWKoksaZsV+eQwBr9JZHUqLd9Fan9mqWt4A8o2sp6Uj6OIJNWXucG44g8Il1PQv474/8C/32stvSoi2hxJQh1rRfTIDA+0UqE8X3z7C+zD24T9qet/s90f9WtA8dM= DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=message-id:date:from:to:subject:mime-version:content-type; b=LFRkvrPFeii5dHmT3izX4T+5ix6Y0KrcvIFXiBWUtYo560Oa9RV+J5pSLUHo256P0Srln6lfzbkRYRCB06sJSn8mLS9Ppidi5mmI0rV1QPjainfyYf+uCgHgo1u+mLWuSA/jaVNGsyO5CmlPOMqzRVTPCIr/7Xyl2cuUDFxL3H8= Received: by 10.142.158.17 with SMTP id g17mr5739275wfe.106.1205739835967; Mon, 17 Mar 2008 00:43:55 -0700 (PDT) Received: by 10.142.212.9 with HTTP; Mon, 17 Mar 2008 00:43:55 -0700 (PDT) Message-ID: Date: Mon, 17 Mar 2008 00:43:55 -0700 From: "Rhomel Chinsio" To: freebsd-hardware@freebsd.org MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Content-Disposition: inline X-Content-Filtered-By: Mailman/MimeDel 2.1.5 Subject: netcell sata controller X-BeenThere: freebsd-hardware@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: General discussion of FreeBSD hardware List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 17 Mar 2008 08:11:04 -0000 Hi Everyone, I'm looking for a cheap but reliable sata controller since my SIL3512 is causing problems. It looks like some NetCell cards are selling cheap ( 32 USD for a 5 port version) since NetCell went out of business. Any opinions on the reliability of this chip? Also I don't really care about hardware raid so I don't mind if the raid features are not supported. Rhomel From owner-freebsd-hardware@FreeBSD.ORG Mon Mar 17 14:10:00 2008 Return-Path: Delivered-To: freebsd-hardware@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 128B71065671 for ; Mon, 17 Mar 2008 14:10:00 +0000 (UTC) (envelope-from onemda@gmail.com) Received: from wf-out-1314.google.com (wf-out-1314.google.com [209.85.200.168]) by mx1.freebsd.org (Postfix) with ESMTP id D40478FC1C for ; Mon, 17 Mar 2008 14:09:59 +0000 (UTC) (envelope-from onemda@gmail.com) Received: by wf-out-1314.google.com with SMTP id 25so5244882wfa.7 for ; Mon, 17 Mar 2008 07:09:59 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=domainkey-signature:received:received:message-id:date:from:to:subject:cc:in-reply-to:mime-version:content-type:content-transfer-encoding:content-disposition:references; bh=Wn0EDMX6BK5RFNCXEFaI7HEJCPwMn3dBNkp/LIx1AE0=; b=ljBaksI3siAcwJP15Z7KJ4DllhS0qsFGbSVTT/qVZdeGTrFVa1IgkRTZwXQpSMpa0O4hOv87l/Km4fY8KNYQD6qinjlKa23dEMsc3DfgaVgijSVMXXi/C+N5kA6Y9NNB9jkisyJsvKMeg3fMjIEWQacWeNbFFIL1GuK5hi9OjWE= DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=message-id:date:from:to:subject:cc:in-reply-to:mime-version:content-type:content-transfer-encoding:content-disposition:references; b=okFRaqjy0eyRw4BDEMFowWvUrGcsyPD0VlfhYhdu4UTC/beKrFJPot3MbC25m5W09OlMZ8h+2ZL9THE/bSioX6EVFI8m+Zw3z90j2PavqgcRdtum4Ig7xC6EIkdRR5lxIMcZN/4wBV6432w7wLDeTbrt9e4mn6zhBSoApNbPiVk= Received: by 10.142.99.21 with SMTP id w21mr129198wfb.55.1205762999418; Mon, 17 Mar 2008 07:09:59 -0700 (PDT) Received: by 10.142.178.11 with HTTP; Mon, 17 Mar 2008 07:09:59 -0700 (PDT) Message-ID: <3a142e750803170709x35c27dfl59a18a28fc7910d@mail.gmail.com> Date: Mon, 17 Mar 2008 15:09:59 +0100 From: "Paul B. Mahol" To: "KAYVEN RIESE" In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 7bit Content-Disposition: inline References: <3a142e750803141944y390fb3aai9263bb4c0bcb2104@mail.gmail.com> Cc: freebsd-hackers@freebsd.org, freeBSD hardware list Subject: Re: Failure to Project OOImpress X-BeenThere: freebsd-hardware@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: General discussion of FreeBSD hardware List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 17 Mar 2008 14:10:00 -0000 On 3/15/08, KAYVEN RIESE wrote: > On Sat, 15 Mar 2008, Paul B. Mahol wrote: > > > Was it connected prior or after Xorg startup? > > I think we connected prior. Should we have? I had my > computer turned off, and I booted it up. The projector > was on during boot. I thought the boot process would > take care of it but it didn't. > It should not be directly related to system in any way. Googling around, I found that Xorg resolutions and modelines must be configured for projectors in the same way as with second monitors ie creating another display or screen layout in xorg.conf. But is should work "out of box way" if for example projector/monitor support current Xorg resolution. Also there are some problems (found by googling) with gdm and projectors in linux environment (no reasons why it should not happen in freebsd also). From owner-freebsd-hardware@FreeBSD.ORG Tue Mar 18 03:18:34 2008 Return-Path: Delivered-To: freebsd-hardware@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 0D04B106567F for ; Tue, 18 Mar 2008 03:18:34 +0000 (UTC) (envelope-from authentec@gmail.com) Received: from wf-out-1314.google.com (wf-out-1314.google.com [209.85.200.172]) by mx1.freebsd.org (Postfix) with ESMTP id C46048FC27 for ; Tue, 18 Mar 2008 03:18:33 +0000 (UTC) (envelope-from authentec@gmail.com) Received: by wf-out-1314.google.com with SMTP id 25so5563958wfa.7 for ; Mon, 17 Mar 2008 20:18:33 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=domainkey-signature:received:received:message-id:date:from:to:subject:mime-version:content-type; bh=0c9zurzDAYNJUXCslKwfz0loNBJy1GctmDVQUS0Cu5M=; b=xzzks+TR4b+zmbVFUCrOVuyhrjA3SFYLmidj0ZjuQk2crbv0d0i8CUjl1HolccgGJBcv6P/QkKD1PSLEwQA/xa+8iKFTWTgTNGHmPvMJMKUFajKlL/DYd/XcKqQlpROWSyPxNKqLXLeBb6xl6/wVSU6n8ksunNWwcABupjJHkrI= DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=message-id:date:from:to:subject:mime-version:content-type; b=hvd2wmn44Ln74Iz0B/VCiKBe+Jl5z7Ha0ayUwzSa/uClwCzsEXKKnBbr4cMXMLDWd0XnqnRlf1av4X0hTyoz3us/uDmc9N0v1wgBAmd4EDv++naAwcCWCOsRJxfTS+YaugwjAfhHKWk8lVnNj8ahrGOJg27giHHij55TI3xvrsM= Received: by 10.143.34.11 with SMTP id m11mr766988wfj.222.1205808671534; Mon, 17 Mar 2008 19:51:11 -0700 (PDT) Received: by 10.142.179.21 with HTTP; Mon, 17 Mar 2008 19:51:11 -0700 (PDT) Message-ID: Date: Mon, 17 Mar 2008 22:51:11 -0400 From: "Greg Mars" To: freebsd-questions@freebsd.org, freebsd-hardware@freebsd.org MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Content-Disposition: inline X-Content-Filtered-By: Mailman/MimeDel 2.1.5 Cc: Subject: Realtek 811B LAN card on FreeBSD 7.0 X-BeenThere: freebsd-hardware@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: General discussion of FreeBSD hardware List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 18 Mar 2008 03:18:34 -0000 A few months ago, I posted asking about how good support the Realtek 8111B PCI Express LAN chipset is. The conclusion was that its behavior was rather flaky on FreeBSD 7.0 Anyway, I got the motherboard with the chip integrated because the MOBO otherwise did what I needed. After installation of FreeBSD/i386 the chip was detected and the re driver attached but DHCP configuration wouldn't work. After searching on the internet, I found some patches at http://lists.freebsd.org/pipermail/freebsd-amd64/2007-December/010545.html http://people.freebsd.org/~yongari/re/if_re.c http://people.freebsd.org/~yongari/re/if_rlreg.h and applied them. After rebuilding the kernel, everything worked. Shortly after I decided I was going to run the FreeBSD/amd64 version instead. I had not kept the patches that worked on i386, so I downloaded from the same URL again. However, this time, applying the patch resulted in no change: DHCP configuration still wouldn't work. Now, I'm not sure what variable is responsible for this, the change to amd64 or whether there was another version of the patch. Interestingly, in the thread where I found those links, people were running amd64 and had their problems resolved. I noticed that the version of if_re.c file was 107 the second time whereas the post said it was 101. I'm guessing the file was updated at the URL and this resulted in a regression. The problem is, I'm not in a position to say exactly which version worked. Is there anyone on the list close to this work and would have an idea of what happened? I am currently using a PCI lan card that works with the rl driver but it would be nice to have the integrated chip work too. From owner-freebsd-hardware@FreeBSD.ORG Tue Mar 18 17:44:54 2008 Return-Path: Delivered-To: freebsd-hardware@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id A6FFF106584B for ; Tue, 18 Mar 2008 17:44:54 +0000 (UTC) (envelope-from david@catwhisker.org) Received: from bunrab.catwhisker.org (adsl-63-193-123-122.dsl.snfc21.pacbell.net [63.193.123.122]) by mx1.freebsd.org (Postfix) with ESMTP id 4A4828FC1D for ; Tue, 18 Mar 2008 17:44:53 +0000 (UTC) (envelope-from david@catwhisker.org) Received: from bunrab.catwhisker.org (localhost [127.0.0.1]) by bunrab.catwhisker.org (8.13.3/8.13.3) with ESMTP id m2IHEYC8049255 for ; Tue, 18 Mar 2008 10:14:34 -0700 (PDT) (envelope-from david@bunrab.catwhisker.org) Received: (from david@localhost) by bunrab.catwhisker.org (8.13.3/8.13.1/Submit) id m2IHEY0g049254 for freebsd-hardware@freebsd.org; Tue, 18 Mar 2008 10:14:34 -0700 (PDT) (envelope-from david) Date: Tue, 18 Mar 2008 10:14:34 -0700 From: David Wolfskill To: freebsd-hardware@freebsd.org Message-ID: <20080318171434.GA49159@bunrab.catwhisker.org> Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="Y7xTucakfITjPcLV" Content-Disposition: inline User-Agent: Mutt/1.4.2.1i Subject: Dell Optiplex 755 hangs every other boot before 82801 Family Hub Interface to PCI Bridge probed X-BeenThere: freebsd-hardware@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: freebsd-hardware@freebsd.org, David Wolfskill List-Id: General discussion of FreeBSD hardware List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 18 Mar 2008 17:44:54 -0000 --Y7xTucakfITjPcLV Content-Type: multipart/mixed; boundary="ibTvN161/egqYuK8" Content-Disposition: inline --ibTvN161/egqYuK8 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable This may prove to be an ACPI issue, but I didn't want to start the thread with a cross-post: it might set a bad example. :-} So at work, I was assigned a shiny new Dell Optiplex 755; when I arrived, it had some flavor of Linux installed on it; I overlaid that with my usual FreeBSD workstation/laptop install, where I have 4 bootable slices: * Slice 1 -- RELENG_6 * Slice 2 -- used for experimenting * Slice 3 -- RELENG_7 * Slice 4 -- HEAD During the course of setting this up, I had occasion to reboot the machine a few times. And I noticed a peculiar pattern: once it had been up & running, the next boot would hang just after =2E.. ehci1: [GIANT-LOCKED] usb6: EHCI version 1.0 usb6: companion controllers, 2 ports each: usb3 usb4 usb5 usb6: on ehci1 usb6: USB revision 2.0 uhub6: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub6: 6 ports with 6 removable, self powered pcib2: at device 30.0 on pci0 =3D=3D=3D> hang <=3D=3D=3D The only thing I've found that gets it out of that hang is a forced power-cycle. Once that's done, the next boot proceeds normally, as if there were nothing wrong; such a successful (RELENG_6) boot then continues with: pci2: on pcib2 isab0: at device 31.0 on pci0 isa0: on isab0 =2E... If I try power-cycling during an ill-fated boot sequence, but before it gets to the "hang" point, it will hang on the next boot anyway -- it's as if the silly machine has a desperate need to hang on a boot before it will behave ... "rationally" (to the extent the concept makes sense -- and at significant risk of over-anthropomorphizing). pciconf(8) identifies the last device probed before the hang as: pcib2@pci0:30:0: class=3D0x060401 card=3D0x02111028 chip=3D0x244e808= 6 rev=3D0x92 hdr=3D0x01 vendor =3D 'Intel Corporation' device =3D '82801 Family (ICH2/3/4/4/5/5/6/7/8/9,63xxESB) Hub Inter= face to PCI Bridge' class =3D bridge subclass =3D PCI-PCI I've attached a complete dmesg.boot from a successful RELENG_6 boot, as well as the output form pciconf -lv. The "hang pattern" appears to be invariant regardless whether I boot RELENG_6, RELENG_7, or HEAD. Please include me on responses, as I am not currently subscribed to hardware@. (For mail clients that honor it, I've set Reply-To.) Peace, david --=20 David H. Wolfskill david@catwhisker.org I submit that "conspiracy" would be an appropriate collective noun for cats. See http://www.catwhisker.org/~david/publickey.gpg for my public key. --ibTvN161/egqYuK8 Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="dmesg.boot" Copyright (c) 1992-2008 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 6.3-STABLE #2: Tue Feb 26 10:17:07 PST 2008 root@dwolf-bsd.jnpr.net:/common/S1/obj/usr/src/sys/DWOLF Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Core(TM)2 Duo CPU E4400 @ 2.00GHz (1995.00-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x6fd Stepping = 13 Features=0xbfebfbff Features2=0xe39d AMD Features=0x20000000 AMD Features2=0x1 Cores per package: 2 real memory = 2102390784 (2004 MB) avail memory = 2047827968 (1952 MB) ACPI APIC Table: FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ioapic0: Changing APIC ID to 8 ioapic0 irqs 0-23 on motherboard lapic0: Forcing LINT1 to edge trigger kbd1 at kbdmux0 ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) hptrr: HPT RocketRAID controller driver v1.1 (Feb 26 2008 10:16:06) acpi0: on motherboard acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 acpi_hpet0: iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 900 cpu0: on acpi0 acpi_perf0: on cpu0 cpu1: on acpi0 acpi_button0: on acpi0 pcib0: port 0xcf8-0xcff on acpi0 pci0: on pcib0 pci0: at device 2.0 (no driver attached) pci0: at device 2.1 (no driver attached) pci0: at device 3.0 (no driver attached) atapci0: port 0xfe80-0xfe87,0xfe90-0xfe93,0xfea0-0xfea7,0xfeb0-0xfeb3,0xfef0-0xfeff irq 18 at device 3.2 on pci0 ata2: on atapci0 ata3: on atapci0 pci0: at device 3.3 (no driver attached) em0: port 0xecc0-0xecdf mem 0xfe9e0000-0xfe9fffff,0xfe9db000-0xfe9dbfff irq 21 at device 25.0 on pci0 em0: Using MSI interrupt em0: Ethernet address: 00:1a:a0:62:96:09 uhci0: port 0xff20-0xff3f irq 16 at device 26.0 on pci0 uhci0: [GIANT-LOCKED] usb0: on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: port 0xff00-0xff1f irq 17 at device 26.1 on pci0 uhci1: [GIANT-LOCKED] usb1: on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered ehci0: mem 0xfe9d9c00-0xfe9d9fff irq 22 at device 26.7 on pci0 ehci0: [GIANT-LOCKED] usb2: EHCI version 1.0 usb2: wrong number of companions (3 != 2) usb2: companion controllers, 2 ports each: usb0 usb1 usb2: on ehci0 usb2: USB revision 2.0 uhub2: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub2: 6 ports with 6 removable, self powered pcm0: mem 0xfe9dc000-0xfe9dffff irq 16 at device 27.0 on pci0 pcib1: irq 16 at device 28.0 on pci0 pci1: on pcib1 uhci2: port 0xff80-0xff9f irq 23 at device 29.0 on pci0 uhci2: [GIANT-LOCKED] usb3: on uhci2 usb3: USB revision 1.0 uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered uhci3: port 0xff60-0xff7f irq 17 at device 29.1 on pci0 uhci3: [GIANT-LOCKED] usb4: on uhci3 usb4: USB revision 1.0 uhub4: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub4: 2 ports with 2 removable, self powered uhci4: port 0xff40-0xff5f irq 18 at device 29.2 on pci0 uhci4: [GIANT-LOCKED] usb5: on uhci4 usb5: USB revision 1.0 uhub5: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub5: 2 ports with 2 removable, self powered ehci1: mem 0xff980800-0xff980bff irq 23 at device 29.7 on pci0 ehci1: [GIANT-LOCKED] usb6: EHCI version 1.0 usb6: companion controllers, 2 ports each: usb3 usb4 usb5 usb6: on ehci1 usb6: USB revision 2.0 uhub6: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub6: 6 ports with 6 removable, self powered pcib2: at device 30.0 on pci0 pci2: on pcib2 isab0: at device 31.0 on pci0 isa0: on isab0 atapci1: port 0xfe00-0xfe07,0xfe10-0xfe13,0xfe20-0xfe27,0xfe30-0xfe33,0xfec0-0xfedf mem 0xff970000-0xff9707ff irq 18 at device 31.2 on pci0 atapci1: AHCI Version 01.20 controller with 6 ports detected ata4: on atapci1 ata5: on atapci1 ata6: on atapci1 ata7: on atapci1 ata8: on atapci1 ata8: port not implemented ata9: on atapci1 ichsmb0: port 0xece0-0xecff mem 0xfe9d9b00-0xfe9d9bff irq 18 at device 31.3 on pci0 ichsmb0: [GIANT-LOCKED] smbus0: on ichsmb0 smb0: on smbus0 fdc0: port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: [FAST] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 ppc0: port 0x378-0x37f,0x778-0x77f irq 7 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold ppbus0: on ppc0 plip0: on ppbus0 lpt0: on ppbus0 lpt0: Interrupt-driven port ppi0: on ppbus0 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A pmtimer0 on isa0 orm0: at iomem 0xc0000-0xcb7ff,0xcb800-0xcd7ff,0xcd800-0xcffff on isa0 ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0 ata1 at port 0x170-0x177,0x376 irq 15 on isa0 atkbdc0: at port 0x60,0x64 on isa0 atkbd0: irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ums0: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM), rev 1.10/3.00, addr 2, iclass 3/1 ums0: 3 buttons and Z dir. ukbd0: Key Tronic Keytronic USB Keyboard, rev 1.10/1.02, addr 3, iclass 3/1 kbd2 at ukbd0 Timecounters tick every 1.000 msec hptrr: no controller detected. ad8: 76293MB at ata4-master SATA300 acd0: CDRW at ata5-master UDMA33 pcm0: pcm0: lapic1: Forcing LINT1 to edge trigger SMP: AP CPU #1 Launched! Trying to mount root from ufs:/dev/ad8s1a --ibTvN161/egqYuK8 Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename=pciconf hostb0@pci0:0:0: class=0x060000 card=0x02111028 chip=0x29b08086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '(??) DRAM Controller' class = bridge subclass = HOST-PCI none0@pci0:2:0: class=0x030000 card=0x02111028 chip=0x29b28086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '(??) Integrated Graphics Controller' class = display subclass = VGA none1@pci0:2:1: class=0x038000 card=0x02111028 chip=0x29b38086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '(??) Integrated Graphics Controller' class = display none2@pci0:3:0: class=0x078000 card=0x02111028 chip=0x29b48086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '(??) HECI Controller' class = simple comms atapci0@pci0:3:2: class=0x010185 card=0x02111028 chip=0x29b68086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '(??) PT IDER Controller' class = mass storage subclass = ATA none3@pci0:3:3: class=0x070002 card=0x02111028 chip=0x29b78086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '(??) Serial KT Controller' class = simple comms subclass = UART em0@pci0:25:0: class=0x020000 card=0x02111028 chip=0x10bd8086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82566DM-2 Gigabit Network Connection' class = network subclass = ethernet uhci0@pci0:26:0: class=0x0c0300 card=0x02111028 chip=0x29378086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801IB/IR/IH (ICH9 Family) USB Universal Host Controller' class = serial bus subclass = USB uhci1@pci0:26:1: class=0x0c0300 card=0x02111028 chip=0x29388086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801IB/IR/IH (ICH9 Family) USB Universal Host Controller' class = serial bus subclass = USB ehci0@pci0:26:7: class=0x0c0320 card=0x02111028 chip=0x293c8086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801IB/IR/IH (ICH9 Family) USB2 Enhanced Host Controller' class = serial bus subclass = USB pcm0@pci0:27:0: class=0x040300 card=0x02111028 chip=0x293e8086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801IB/IR/IH (ICH9 Family) HD Audio Controller' class = multimedia pcib1@pci0:28:0: class=0x060400 card=0x02111028 chip=0x29408086 rev=0x02 hdr=0x01 vendor = 'Intel Corporation' device = '82801IB/IR/IH (ICH9 Family) PCIe Root Port 1' class = bridge subclass = PCI-PCI uhci2@pci0:29:0: class=0x0c0300 card=0x02111028 chip=0x29348086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801IB/IR/IH (ICH9 Family) USB Universal Host Controller' class = serial bus subclass = USB uhci3@pci0:29:1: class=0x0c0300 card=0x02111028 chip=0x29358086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801IB/IR/IH (ICH9 Family) USB Universal Host Controller' class = serial bus subclass = USB uhci4@pci0:29:2: class=0x0c0300 card=0x02111028 chip=0x29368086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801IB/IR/IH (ICH9 Family) USB Universal Host Controller' class = serial bus subclass = USB ehci1@pci0:29:7: class=0x0c0320 card=0x02111028 chip=0x293a8086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801IB/IR/IH (ICH9 Family) USB2 Enhanced Host Controller' class = serial bus subclass = USB pcib2@pci0:30:0: class=0x060401 card=0x02111028 chip=0x244e8086 rev=0x92 hdr=0x01 vendor = 'Intel Corporation' device = '82801 Family (ICH2/3/4/4/5/5/6/7/8/9,63xxESB) Hub Interface to PCI Bridge' class = bridge subclass = PCI-PCI isab0@pci0:31:0: class=0x060100 card=0x00000000 chip=0x29148086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801IB/IR/IH (ICH9 Family) DO LPC Interface Controller' class = bridge subclass = PCI-ISA atapci1@pci0:31:2: class=0x010601 card=0x02111028 chip=0x29228086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801IB/IR/IH (ICH9 Family) 6 port SATA AHCI Controller' class = mass storage ichsmb0@pci0:31:3: class=0x0c0500 card=0x02111028 chip=0x29308086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801IB/IR/IH (ICH9 Family) SMBus Controller' class = serial bus subclass = SMBus --ibTvN161/egqYuK8-- --Y7xTucakfITjPcLV Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.0 (FreeBSD) iEYEARECAAYFAkff+HkACgkQmprOCmdXAD0hTwCePcPxG89dsWYMs0Rm9TPnY6Xh mFUAniRC9O9Z7WKg5pJmXD0ut7IxIpGe =s5Fq -----END PGP SIGNATURE----- --Y7xTucakfITjPcLV-- From owner-freebsd-hardware@FreeBSD.ORG Wed Mar 19 08:50:52 2008 Return-Path: Delivered-To: freebsd-hardware@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id E41721065671 for ; Wed, 19 Mar 2008 08:50:51 +0000 (UTC) (envelope-from hopet@ics.muni.cz) Received: from minas.ics.muni.cz (minas.ics.muni.cz [147.251.4.40]) by mx1.freebsd.org (Postfix) with ESMTP id 60AF58FC21 for ; Wed, 19 Mar 2008 08:50:50 +0000 (UTC) (envelope-from hopet@ics.muni.cz) Received: from KLOBOUCEK (dhcp3-82.ics.muni.cz [147.251.3.82]) (authenticated user=hopet@ICS.MUNI.CZ bits=0) by minas.ics.muni.cz (8.13.8/8.13.8/SuSE Linux 0.8) with ESMTP id m2J8nKMs005475 (version=TLSv1/SSLv3 cipher=RC4-MD5 bits=128 verify=NO); Wed, 19 Mar 2008 09:49:21 +0100 From: "Petr Holub" To: "'Sam Leffler'" References: <003201c87aba$1ecdd210$5c697630$@muni.cz> <47C86BF5.8010306@errno.com> In-Reply-To: Date: Wed, 19 Mar 2008 09:49:16 +0100 Message-ID: <018401c8899e$206076d0$61216470$@muni.cz> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit X-Mailer: Microsoft Office Outlook 12.0 Thread-Index: Ach7FwR/+8L6kgg+Sta6GKU47wTIpgEcF+fgAoWeyBA= Content-Language: cs X-Muni-Spam-TestIP: 147.251.3.82 X-Muni-Envelope-From: hopet@ics.muni.cz X-Muni-Virus-Test: Clean X-Greylist: Sender succeeded SMTP AUTH authentication, not delayed by milter-greylist-3.0 (minas.ics.muni.cz [147.251.4.35]); Wed, 19 Mar 2008 09:49:21 +0100 (CET) Cc: freebsd-hardware@freebsd.org Subject: RE: support for Proxim Silver wifi card X-BeenThere: freebsd-hardware@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: General discussion of FreeBSD hardware List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 19 Mar 2008 08:50:52 -0000 Sam, any clues about the problem below? I'm starting to suspect the problem might actually be something around CardBus, as others have reported similar problems: http://www.mail-archive.com/freebsd-stable@freebsd.org/msg91307.html I'm also using T61p laptop. Maybe something that prevents the cards from being init'd properly? Petr ================================================================ Petr Holub CESNET z.s.p.o. Supercomputing Center Brno Zikova 4 Institute of Compt. Science 162 00 Praha 6, CZ Masaryk University Czech Republic Botanicka 68a, 60200 Brno, CZ e-mail: Petr.Holub@cesnet.cz phone: +420-549493944 fax: +420-541212747 e-mail: hopet@ics.muni.cz > -----Original Message----- > From: Petr Holub [mailto:hopet@ics.muni.cz] > Sent: Thursday, March 06, 2008 1:52 PM > To: 'Sam Leffler' > Cc: 'freebsd-hardware@freebsd.org' > Subject: RE: support for Proxim Silver wifi card > > > It should work (devid 0x13 is supported by the hal in cvs). You can try > > the test hal at http://www.freebsd.org/~sam. If that works please let > > me know what it identifies the mac+phy as. > > It took as long as till today for me to get my hands back on that > HW. What I did I took HAL from your website, replaced > /usr/src/sys/contrib/dev/ath > directory and did > make buildkernel && make install kernel > (the machine is normal 7.0-RELEASE so I've build standard GENERIC > kernel with only HAL changed) > > The cards (this time I did the test with both SILVER and GOLD > version of that Proxim card) obviously don't work even with this HAL. > I've tried to gather as much information as possible - see below. > Let me know if you need something more. > > Thanks a lot, > Petr > > ============================================================ > PROXIM Gold: > ============================================================ > > info: > > Proxim GOLD 802.11a/b/g ComboCard > Model: 8480-WD > MAC-Address: 0020A64C5F02 > SN: 03MT20004729 > P/N: 64730/A > > dmesg (verbose): > > pcib7: requested memory range 0x88000000-0xffffffff: good > cbb0: Opening memory: > cbb0: Normal: 0xbfeb0000-0xbfebffff > unknown: Lazy allocation of 0x10000 bytes rid 0x10 type 3 at 0xbfeb0000 > cardbus0: Expecting link target, got 0x0 > cbb0: Opening memory: > map[10]: type Memory, range 32, base 0, size 16, enabled > pcib7: requested memory range 0x88000000-0xffffffff: good > found-> vendor=0x168c, dev=0x0013, revid=0x01 > domain=0, bus=22, slot=0, func=0 > class=02-00-00, hdrtype=0x00, mfdev=0 > cmdreg=0x0002, statreg=0x0290, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x0a (2500 ns), maxlat=0x1c (7000 ns) > intpin=a, irq=16 > powerspec 2 supports D0 D3 current D0 > ath0: mem 0xbfeb0000-0xbfebffff irq 16 at device 0.0 on > cardbus0 > ath0: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xbfeb0000 > cbb0: Opening memory: > cbb0: Normal: 0xbfeb0000-0xbfebffff > ath0: [MPSAFE] > ath0: [ITHREAD] > ath0: unable to attach hardware; HAL status 13 > cbb0: Opening memory: > device_attach: ath0 attach returned 6 > > > pciconf -lvc: > > ath0@pci0:22:0:0: class=0x020000 card=0x0a1014b7 chip=0x0013168c > rev=0x01 hdr=0x00 > vendor = 'Atheros Communications Inc.' > device = 'AR5212, AR5213 802.11a/b/g Wireless Adapter' > class = network > subclass = ethernet > > ============================================================ > PROXIM Silver: > ============================================================ > > info: > > Proxim SILVER 802.11a/b/g ComboCard > Model: 8481-WD > MAC-Address: 0020A64C713A > SN: 03MT21000304 > P/N: 64738/A > > dmesg (verbose): > > pcib7: requested memory range 0x88000000-0xffffffff: good > cbb0: Opening memory: > cbb0: Normal: 0xbfeb0000-0xbfebffff > unknown: Lazy allocation of 0x10000 bytes rid 0x10 type 3 at 0xbfeb0000 > cardbus0: Expecting link target, got 0x0 > cbb0: Opening memory: > map[10]: type Memory, range 32, base 0, size 16, enabled > pcib7: requested memory range 0x88000000-0xffffffff: good > found-> vendor=0x168c, dev=0x0013, revid=0x01 > domain=0, bus=22, slot=0, func=0 > class=02-00-00, hdrtype=0x00, mfdev=0 > cmdreg=0x0002, statreg=0x0290, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x0a (2500 ns), maxlat=0x1c (7000 ns) > intpin=a, irq=16 > powerspec 2 supports D0 D3 current D0 > ath0: mem 0xbfeb0000-0xbfebffff irq 16 at device 0.0 on > cardbus0 > ath0: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xbfeb0000 > cbb0: Opening memory: > cbb0: Normal: 0xbfeb0000-0xbfebffff > ath0: [MPSAFE] > ath0: [ITHREAD] > ath0: unable to attach hardware; HAL status 13 > cbb0: Opening memory: > device_attach: ath0 attach returned 6 > > pciconf -lvc: > > ath0@pci0:22:0:0: class=0x020000 card=0xaa1014b7 chip=0x0013168c > rev=0x01 hdr=0x00 > vendor = 'Atheros Communications Inc.' > device = 'AR5212, AR5213 802.11a/b/g Wireless Adapter' > class = network > subclass = ethernet From owner-freebsd-hardware@FreeBSD.ORG Wed Mar 19 11:32:39 2008 Return-Path: Delivered-To: freebsd-hardware@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 1D1821065678 for ; Wed, 19 Mar 2008 11:32:39 +0000 (UTC) (envelope-from gexlie@gmail.com) Received: from an-out-0708.google.com (an-out-0708.google.com [209.85.132.248]) by mx1.freebsd.org (Postfix) with ESMTP id B3A888FC2E for ; Wed, 19 Mar 2008 11:32:38 +0000 (UTC) (envelope-from gexlie@gmail.com) Received: by an-out-0708.google.com with SMTP id c14so147121anc.13 for ; Wed, 19 Mar 2008 04:32:36 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=beta; h=domainkey-signature:received:received:message-id:date:from:to:subject:mime-version:content-type:content-transfer-encoding:content-disposition; bh=zGowpmSSxvXNWddHWbN7mgsXBlB6D13BNzIeSEA7nwQ=; b=XNjm9t6oMAzW/bOyBQn3G6H72aI1G2qwjxl0UterNfRELiB6/XLnCWdL5tzTqYz7Uj4TpZfELprzL2hJMKik+9immKdmDSa1k8ZVVhFlicrdbcybnDoPWmTMaLCmt7ptskWPnjvYbzbKLSR9ZQzuUoG8BXgl/ni05HIuexb/ols= DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=beta; h=message-id:date:from:to:subject:mime-version:content-type:content-transfer-encoding:content-disposition; b=tp0JQSb9QrVElzJRyWEFsyhmkGiL2SeqnjnnhbwOzT0L5nf2/8jyfitSX/ydMXEXGyvmQOCPOFrqt8WboXnVWreBvZCmvpJlHR+EubNgCCJsIUdwbUQrEFOFjgZUG6vuuZZHWfDkNtFWpISyXHvrOiKCPnKgOOoIgYhPRobeVgA= Received: by 10.100.133.11 with SMTP id g11mr2022372and.20.1205924795976; Wed, 19 Mar 2008 04:06:35 -0700 (PDT) Received: by 10.100.122.5 with HTTP; Wed, 19 Mar 2008 04:06:35 -0700 (PDT) Message-ID: <53cc795f0803190406l3490cd14gce524977c18db0c8@mail.gmail.com> Date: Wed, 19 Mar 2008 14:06:35 +0300 From: "Matkhamtkha Brekher" To: freebsd-hardware@freebsd.org MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Content-Disposition: inline Subject: IBM x3550 and ServeRAID 8k-l X-BeenThere: freebsd-hardware@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: General discussion of FreeBSD hardware List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 19 Mar 2008 11:32:39 -0000 Greetings to all! I'm planning to buy IBM Server x3550 7978KGG which already has integrated RAID controller ServeRAID 8k-l Here http://www.freebsd.org/releases/7.0R/hardware.html#DISK i've found only support of IBM ServeRAID 8k controllers. Does it compatible with 8k-l ? And what the major differencies between 8k-l and 8k ? From owner-freebsd-hardware@FreeBSD.ORG Wed Mar 19 13:24:56 2008 Return-Path: Delivered-To: freebsd-hardware@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 87C1E1065674 for ; Wed, 19 Mar 2008 13:24:56 +0000 (UTC) (envelope-from jhb@freebsd.org) Received: from elvis.mu.org (elvis.mu.org [192.203.228.196]) by mx1.freebsd.org (Postfix) with ESMTP id 795BA8FC17 for ; Wed, 19 Mar 2008 13:24:56 +0000 (UTC) (envelope-from jhb@freebsd.org) Received: from zion.baldwin.cx (66-23-211-162.clients.speedfactory.net [66.23.211.162]) by elvis.mu.org (Postfix) with ESMTP id 655E21A4D84; Wed, 19 Mar 2008 06:23:32 -0700 (PDT) From: John Baldwin To: freebsd-hardware@freebsd.org, David Wolfskill Date: Wed, 19 Mar 2008 09:17:17 -0400 User-Agent: KMail/1.9.7 References: <20080318171434.GA49159@bunrab.catwhisker.org> In-Reply-To: <20080318171434.GA49159@bunrab.catwhisker.org> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-15" Content-Transfer-Encoding: 7bit Content-Disposition: inline Message-Id: <200803190917.17502.jhb@freebsd.org> Cc: Subject: Re: Dell Optiplex 755 hangs every other boot before 82801 Family Hub Interface to PCI Bridge probed X-BeenThere: freebsd-hardware@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: General discussion of FreeBSD hardware List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 19 Mar 2008 13:24:56 -0000 On Tuesday 18 March 2008 01:14:34 pm David Wolfskill wrote: > This may prove to be an ACPI issue, but I didn't want to start the > thread with a cross-post: it might set a bad example. :-} > > So at work, I was assigned a shiny new Dell Optiplex 755; when I > arrived, it had some flavor of Linux installed on it; I overlaid that > with my usual FreeBSD workstation/laptop install, where I have 4 > bootable slices: > > * Slice 1 -- RELENG_6 > * Slice 2 -- used for experimenting > * Slice 3 -- RELENG_7 > * Slice 4 -- HEAD > > During the course of setting this up, I had occasion to reboot the > machine a few times. And I noticed a peculiar pattern: once it had been > up & running, the next boot would hang just after > > ... > ehci1: [GIANT-LOCKED] > usb6: EHCI version 1.0 > usb6: companion controllers, 2 ports each: usb3 usb4 usb5 > usb6: on ehci1 > usb6: USB revision 2.0 > uhub6: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 > uhub6: 6 ports with 6 removable, self powered > pcib2: at device 30.0 on pci0 > > ===> hang <=== > > The only thing I've found that gets it out of that hang is a forced > power-cycle. Once that's done, the next boot proceeds normally, as if > there were nothing wrong; such a successful (RELENG_6) boot then > continues with: > > pci2: on pcib2 > isab0: at device 31.0 on pci0 > isa0: on isab0 > .... Do a verbose boot. It might be enumerating the PCI bus when it hangs or some such and a verbose boot would tell us more of where it is at when it hangs. Other than that, you'll have to add printfs to track down exactly where it hangs. :-/ -- John Baldwin From owner-freebsd-hardware@FreeBSD.ORG Wed Mar 19 17:59:52 2008 Return-Path: Delivered-To: freebsd-hardware@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id B571C106564A for ; Wed, 19 Mar 2008 17:59:52 +0000 (UTC) (envelope-from sam@errno.com) Received: from ebb.errno.com (ebb.errno.com [69.12.149.25]) by mx1.freebsd.org (Postfix) with ESMTP id 847318FC1D for ; Wed, 19 Mar 2008 17:59:52 +0000 (UTC) (envelope-from sam@errno.com) Received: from trouble.errno.com (trouble.errno.com [10.0.0.248]) (authenticated bits=0) by ebb.errno.com (8.13.6/8.12.6) with ESMTP id m2JHxpfb000122 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NO); Wed, 19 Mar 2008 10:59:51 -0700 (PDT) (envelope-from sam@errno.com) Message-ID: <47E15497.7060900@errno.com> Date: Wed, 19 Mar 2008 10:59:51 -0700 From: Sam Leffler User-Agent: Thunderbird 2.0.0.9 (X11/20071125) MIME-Version: 1.0 To: Petr Holub References: <003201c87aba$1ecdd210$5c697630$@muni.cz> <47C86BF5.8010306@errno.com> <018401c8899e$206076d0$61216470$@muni.cz> In-Reply-To: <018401c8899e$206076d0$61216470$@muni.cz> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit X-DCC-sonic.net-Metrics: ebb.errno.com; whitelist Cc: freebsd-hardware@freebsd.org Subject: Re: support for Proxim Silver wifi card X-BeenThere: freebsd-hardware@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: General discussion of FreeBSD hardware List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 19 Mar 2008 17:59:52 -0000 Hal status 13 (HAL_ENOTSUPP from ah.h) means the info read from the card at attach indicated a device that's not supported. Given the pci device id I am guessing the card really is supported though vendors sometimes re-use old pci device id's with newer parts (0x13 is a generate 5212 identified). If the hal simply couldn't read the necessary registers you could also get this error. If you can plug this card into another system and it works then you know it's an issue w/ support on your laptop. I happen to have a t61p and just tried a bunch of different cards (including one w/ this device id) and all the cards I expected to work so the best I can suggest is you try the card in another laptop. I don't have one of these cards to test but I do have cards w/ just about every Atheros part (except for the newest 11n parts). Sam Petr Holub wrote: > Sam, > > any clues about the problem below? I'm starting to suspect the > problem might actually be something around CardBus, as others > have reported similar problems: > http://www.mail-archive.com/freebsd-stable@freebsd.org/msg91307.html > I'm also using T61p laptop. Maybe something that prevents the cards > from being init'd properly? > > Petr > > ================================================================ > Petr Holub > CESNET z.s.p.o. Supercomputing Center Brno > Zikova 4 Institute of Compt. Science > 162 00 Praha 6, CZ Masaryk University > Czech Republic Botanicka 68a, 60200 Brno, CZ > e-mail: Petr.Holub@cesnet.cz phone: +420-549493944 > fax: +420-541212747 > e-mail: hopet@ics.muni.cz > > > >> -----Original Message----- >> From: Petr Holub [mailto:hopet@ics.muni.cz] >> Sent: Thursday, March 06, 2008 1:52 PM >> To: 'Sam Leffler' >> Cc: 'freebsd-hardware@freebsd.org' >> Subject: RE: support for Proxim Silver wifi card >> >> >>> It should work (devid 0x13 is supported by the hal in cvs). You can try >>> the test hal at http://www.freebsd.org/~sam. If that works please let >>> me know what it identifies the mac+phy as. >>> >> It took as long as till today for me to get my hands back on that >> HW. What I did I took HAL from your website, replaced >> /usr/src/sys/contrib/dev/ath >> directory and did >> make buildkernel && make install kernel >> (the machine is normal 7.0-RELEASE so I've build standard GENERIC >> kernel with only HAL changed) >> >> The cards (this time I did the test with both SILVER and GOLD >> version of that Proxim card) obviously don't work even with this HAL. >> I've tried to gather as much information as possible - see below. >> Let me know if you need something more. >> >> Thanks a lot, >> Petr >> >> ============================================================ >> PROXIM Gold: >> ============================================================ >> >> info: >> >> Proxim GOLD 802.11a/b/g ComboCard >> Model: 8480-WD >> MAC-Address: 0020A64C5F02 >> SN: 03MT20004729 >> P/N: 64730/A >> >> dmesg (verbose): >> >> pcib7: requested memory range 0x88000000-0xffffffff: good >> cbb0: Opening memory: >> cbb0: Normal: 0xbfeb0000-0xbfebffff >> unknown: Lazy allocation of 0x10000 bytes rid 0x10 type 3 at 0xbfeb0000 >> cardbus0: Expecting link target, got 0x0 >> cbb0: Opening memory: >> map[10]: type Memory, range 32, base 0, size 16, enabled >> pcib7: requested memory range 0x88000000-0xffffffff: good >> found-> vendor=0x168c, dev=0x0013, revid=0x01 >> domain=0, bus=22, slot=0, func=0 >> class=02-00-00, hdrtype=0x00, mfdev=0 >> cmdreg=0x0002, statreg=0x0290, cachelnsz=0 (dwords) >> lattimer=0x00 (0 ns), mingnt=0x0a (2500 ns), maxlat=0x1c (7000 ns) >> intpin=a, irq=16 >> powerspec 2 supports D0 D3 current D0 >> ath0: mem 0xbfeb0000-0xbfebffff irq 16 at device 0.0 on >> cardbus0 >> ath0: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xbfeb0000 >> cbb0: Opening memory: >> cbb0: Normal: 0xbfeb0000-0xbfebffff >> ath0: [MPSAFE] >> ath0: [ITHREAD] >> ath0: unable to attach hardware; HAL status 13 >> cbb0: Opening memory: >> device_attach: ath0 attach returned 6 >> >> >> pciconf -lvc: >> >> ath0@pci0:22:0:0: class=0x020000 card=0x0a1014b7 chip=0x0013168c >> rev=0x01 hdr=0x00 >> vendor = 'Atheros Communications Inc.' >> device = 'AR5212, AR5213 802.11a/b/g Wireless Adapter' >> class = network >> subclass = ethernet >> >> ============================================================ >> PROXIM Silver: >> ============================================================ >> >> info: >> >> Proxim SILVER 802.11a/b/g ComboCard >> Model: 8481-WD >> MAC-Address: 0020A64C713A >> SN: 03MT21000304 >> P/N: 64738/A >> >> dmesg (verbose): >> >> pcib7: requested memory range 0x88000000-0xffffffff: good >> cbb0: Opening memory: >> cbb0: Normal: 0xbfeb0000-0xbfebffff >> unknown: Lazy allocation of 0x10000 bytes rid 0x10 type 3 at 0xbfeb0000 >> cardbus0: Expecting link target, got 0x0 >> cbb0: Opening memory: >> map[10]: type Memory, range 32, base 0, size 16, enabled >> pcib7: requested memory range 0x88000000-0xffffffff: good >> found-> vendor=0x168c, dev=0x0013, revid=0x01 >> domain=0, bus=22, slot=0, func=0 >> class=02-00-00, hdrtype=0x00, mfdev=0 >> cmdreg=0x0002, statreg=0x0290, cachelnsz=0 (dwords) >> lattimer=0x00 (0 ns), mingnt=0x0a (2500 ns), maxlat=0x1c (7000 ns) >> intpin=a, irq=16 >> powerspec 2 supports D0 D3 current D0 >> ath0: mem 0xbfeb0000-0xbfebffff irq 16 at device 0.0 on >> cardbus0 >> ath0: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xbfeb0000 >> cbb0: Opening memory: >> cbb0: Normal: 0xbfeb0000-0xbfebffff >> ath0: [MPSAFE] >> ath0: [ITHREAD] >> ath0: unable to attach hardware; HAL status 13 >> cbb0: Opening memory: >> device_attach: ath0 attach returned 6 >> >> pciconf -lvc: >> >> ath0@pci0:22:0:0: class=0x020000 card=0xaa1014b7 chip=0x0013168c >> rev=0x01 hdr=0x00 >> vendor = 'Atheros Communications Inc.' >> device = 'AR5212, AR5213 802.11a/b/g Wireless Adapter' >> class = network >> subclass = ethernet >> > > > From owner-freebsd-hardware@FreeBSD.ORG Wed Mar 19 20:41:57 2008 Return-Path: Delivered-To: freebsd-hardware@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 62902106566C; Wed, 19 Mar 2008 20:41:57 +0000 (UTC) (envelope-from david@catwhisker.org) Received: from bunrab.catwhisker.org (adsl-63-193-123-122.dsl.snfc21.pacbell.net [63.193.123.122]) by mx1.freebsd.org (Postfix) with ESMTP id DF6D88FC12; Wed, 19 Mar 2008 20:41:48 +0000 (UTC) (envelope-from david@catwhisker.org) Received: from bunrab.catwhisker.org (localhost [127.0.0.1]) by bunrab.catwhisker.org (8.13.3/8.13.3) with ESMTP id m2JKfmQ6056552; Wed, 19 Mar 2008 13:41:48 -0700 (PDT) (envelope-from david@bunrab.catwhisker.org) Received: (from david@localhost) by bunrab.catwhisker.org (8.13.3/8.13.1/Submit) id m2JKfmPM056551; Wed, 19 Mar 2008 13:41:48 -0700 (PDT) (envelope-from david) Date: Wed, 19 Mar 2008 13:41:48 -0700 From: David Wolfskill To: John Baldwin Message-ID: <20080319204148.GZ53010@bunrab.catwhisker.org> References: <20080318171434.GA49159@bunrab.catwhisker.org> <200803190917.17502.jhb@freebsd.org> Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="KYiQozSDGNqzVCz3" Content-Disposition: inline In-Reply-To: <200803190917.17502.jhb@freebsd.org> User-Agent: Mutt/1.4.2.1i Cc: freebsd-hardware@freebsd.org Subject: Re: Dell Optiplex 755 hangs every other boot before 82801 Family Hub Interface to PCI Bridge probed X-BeenThere: freebsd-hardware@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: freebsd-hardware@freebsd.org, David Wolfskill List-Id: General discussion of FreeBSD hardware List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 19 Mar 2008 20:41:57 -0000 --KYiQozSDGNqzVCz3 Content-Type: multipart/mixed; boundary="T3szOYASPyCoAfS0" Content-Disposition: inline --T3szOYASPyCoAfS0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable On Wed, Mar 19, 2008 at 09:17:17AM -0400, John Baldwin wrote: > ... > Do a verbose boot. It might be enumerating the PCI bus when it hangs or = some=20 > such and a verbose boot would tell us more of where it is at when it hang= s. =20 > Other than that, you'll have to add printfs to track down exactly where i= t=20 > hangs. :-/ OK; I switched it to boot (verbosely) from slice 4 (HEAD/CURRENT as of a couple weeks ago) -- figuring that there might be more "interesting" information available that way, then ran tip(1) within script(1) to capture the output. I edited the typescript file in a couple of ways: * I removed the ^M characters (saving about 2K in file size) * I split the file into "console_755-hang" and "console_755-nohang" to make comparing the results of the experiments a bit easier. In the same spirit, I removed the beginning and ending script- and tip-generated stuff that wasn't relevant. I've attached both files. The last bit of stuff in the "hang" case was: usb6: USB revision 2.0 uhub6: on usb6 uhub6: 6 ports with 6 removable, self powered pcib2: at device 30.0 on pci0 pcib2: domain 0 pcib2: secondary bus 2 pcib2: subordinate bus 2 pcib2: I/O decode 0xf000-0xfff pcib2: no prefetched decode pcib2: Subtractively decoded bridge. and in the "nohang" case, that bit was followed by: pci2: on pcib2 pci2: domain=3D0, physical bus=3D2 isab0: at device 31.0 on pci0 isa0: on isab0 atapci1: port 0xfe00-0xfe07,0xfe10-= 0xfe13,0xfe20-0xfe27,0xfe30-0xfe33,0xfec0-0xfedf mem 0xff970000-0xff9707ff = irq 18 at device 31.2 on pci0 atapci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xfec0 atapci1: Reserved 0x800 bytes for rid 0x24 type 3 at 0xff970000 atapci1: [MPSAFE] atapci1: [ITHREAD] atapci1: AHCI Version 01.20 controller with 6 ports detected I note, too, that running diff(1) to compare the 2 files shows that the "nohang" case is missing some curious lines that show up in the "hang" case, e.g.: ioapic0: routing intpin 22 (PCI IRQ 22) to vector 53 ehci0: [GIANT-LOCKED] ehci0: [ITHREAD] -usb2: waiting for BIOS to give up control usb2: EHCI version 1.0 usb2: wrong number of companions (3 !=3D 2) usb2: companion controllers, 2 ports each: usb0 usb1 =2E.. ehci1: Reserved 0x400 bytes for rid 0x10 type 3 at 0xff980800 ehci1: [GIANT-LOCKED] ehci1: [ITHREAD] -usb6: waiting for BIOS to give up control -usb6: timed out waiting for BIOS usb6: EHCI version 1.0 usb6: companion controllers, 2 ports each: usb3 usb4 usb5 usb6: on ehci1 Thanks for your help so far. Peace, david --=20 David H. Wolfskill david@catwhisker.org I submit that "conspiracy" would be an appropriate collective noun for cats. See http://www.catwhisker.org/~david/publickey.gpg for my public key. --T3szOYASPyCoAfS0 Content-Type: text/plain; charset=iso-8859-1 Content-Disposition: attachment; filename=console_755-hang Content-Transfer-Encoding: quoted-printable /boot.config: -DP/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\= =08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08= -=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|= =08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08Cons= oles: internal video/keyboard serial port =20 BIOS drive A: is disk0 BIOS drive C: is disk1 BIOS 633kB/2052094kB available memory FreeBSD/i386 bootstrap loader, Revision 1.1 (root@dwolf-lnx.jnpr.net, Tue Feb 12 23:46:19 UTC 2008) |=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-= =08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08= /=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\= =08|=08/=08-=08\=08Loading /boot/defaults/loader.conf=20 |=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-= =08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08= /=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\= =08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08= -=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|= =08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08= \=08|=08/=08-=08\=08/boot/kernel/kernel text=3D0x7e7224 |=08/=08-=08\=08|= =08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08= \=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/= =08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08= |=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-= =08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08= /=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\= =08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08= -=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|= =08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08= \=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/= =08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08= |=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-= =08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08= /=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\= =08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08= -=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|= =08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08= \=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/= =08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08= |=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-= =08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08= /=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\= =08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08= -=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|= =08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08= \=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/= =08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08= |=08/=08data=3D0xd3fc0+0xab73c -=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08= /=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\= =08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08= -=08\=08|=08/=08-=08\=08syms=3D[0x4+0x8d6f0|=08/=08-=08\=08|=08/=08-=08\=08= |=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-= =08\=08|=08/=08-=08\=08|=08/=08-=08+0x4+0xbce97\=08|=08/=08-=08\=08|=08/=08= -=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|= =08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08= \=08|=08/=08-=08] \=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/= =08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08= |=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-= =08\=08=1B[H=1B[J=1B[4;46H ______=1B[5;46H | ____| __ ___ ___ =1B[= 6;46H | |__ | '__/ _ \/ _ \=1B[7;46H | __|| | | __/ __/=1B[8;46H = | | | | | | |=1B[9;46H |_| |_| \___|\___|=1B[10;46H ___= _ _____ _____=1B[11;46H | _ \ / ____| __ \=1B[12;46H | |_) | (___= | | | |=1B[13;46H | _ < \___ \| | | |=1B[14;46H | |_) |____) | |_= _| |=1B[15;46H | | | |=1B[16;46H |____/|_____/|_____/= =1B[3;2H=B3=1B[4;2H=B3=1B[5;2H=B3=1B[6;2H=B3=1B[7;2H=B3=1B[8;2H=B3=1B[9;2H= =B3=1B[10;2H=B3=1B[11;2H=B3=1B[12;2H=B3=1B[13;2H=B3=1B[14;2H=B3=1B[15;2H=B3= =1B[16;2H=B3=1B[17;2H=B3=1B[18;2H=B3=1B[19;2H=B3=1B[20;2H=B3=1B[21;2H=B3=1B= [3;44H=B3=1B[4;44H=B3=1B[5;44H=B3=1B[6;44H=B3=1B[7;44H=B3=1B[8;44H=B3=1B[9;= 44H=B3=1B[10;44H=B3=1B[11;44H=B3=1B[12;44H=B3=1B[13;44H=B3=1B[14;44H=B3=1B[= 15;44H=B3=1B[16;44H=B3=1B[17;44H=B3=1B[18;44H=B3=1B[19;44H=B3=1B[20;44H=B3= =1B[21;44H=B3=1B[2;3H=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4= =C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=1B[22= ;3H=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4= =C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=1B[2;2H=DA=1B[22;2H=C0= =1B[2;44H=BF=1B[22;44H=D9=1B[6;13HWelcome to FreeBSD!=1B[9;5H1 =1B[9;6H. Bo= ot FreeBSD [default]=1B[10;5H2 =1B[10;6H. Boot FreeBSD with ACPI disabled= =1B[11;5H3 =1B[11;6H. Boot FreeBSD in Safe Mode=1B[12;5H4 =1B[12;6H. Boot F= reeBSD in single user mode=1B[13;5H5 =1B[13;6H. Boot FreeBSD with verbose l= ogging=1B[14;5H6 =1B[14;6H. Escape to loader prompt=1B[15;5H7 =1B[15;6H. Re= boot=1B[20;5HSelect option, [Enter] for default=1B[21;5Hor [Space] to pause= timer =1B[21;32H10 =1B[21;32H10 =1B[21;32H10 =1B[21;32H10 =1B[21;32H9 = =1B[21;32H9 =1B[21;32H9 =1B[21;32H9 =1B[21;32H9 =1B[21;32H9 =1B[21;32H9 =1B= [21;32H9 =1B[21;32H9 =1B[21;32H9 =1B[21;32H9 =1B[21;32H9 =1B[21;32H9 =1B[21= ;32H9 =1B[21;32H9 =1B[21;32H9 =1B[21;32H8 =1B[21;32H8 =1B[21;32H8 =1B[21;32= H8 =1B[21;32H8 =1B[21;32H8 =1B[21;32H8 =1B[21;32H8 =1B[21;32H8 =1B[21;32H8 = =1B[21;32H8 =1B[21;32H8 =1B[21;32H8 =1B[21;32H8 =1B[21;32H8 =1B[21;32H8 =1B= [21;32H8 =1B[21;32H7 =1B[21;32H7 =1B[21;32H7 =1B[21;32H7 =1B[21;32H7 =1B[21= ;32H7 =1B[21;32H7 =1B[21;32H7 =1B[21;32H7 =1B[21;32H7 =1B[21;32H7 =1B[25;0H= =1B[25;0H|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|= =08/=08-=08\=08|=08/=08-=08\=08|=08/boot/kernel/acpi.ko text=3D0x53d6c /=08= -=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|= =08/=08data=3D0x25e0+0x186c -=08\=08syms=3D[0x4+0x89f0|=08/=08+0x4+0xbb87-= =08\=08|=08] /=08-=08\=08|=08/=08-=08\=08|=08/=08-=08GDB: no debug ports present KDB: debugger backends: ddb KDB: current backend: ddb SMAP type=3D01 base=3D0000000000000000 len=3D000000000009e400 SMAP type=3D02 base=3D00000000000f0000 len=3D0000000000010000 SMAP type=3D01 base=3D0000000000100000 len=3D000000007d3ff800 SMAP type=3D04 base=3D000000007d4ff800 len=3D0000000000054400 SMAP type=3D03 base=3D000000007d553c00 len=3D0000000000002000 SMAP type=3D02 base=3D000000007d555c00 len=3D0000000000aaa400 SMAP type=3D02 base=3D00000000e0000000 len=3D0000000010000000 SMAP type=3D02 base=3D00000000f0000000 len=3D000000000ec00000 SMAP type=3D02 base=3D00000000fed00000 len=3D0000000000000400 SMAP type=3D02 base=3D00000000fed20000 len=3D0000000000080000 SMAP type=3D02 base=3D00000000fec00000 len=3D0000000000100000 SMAP type=3D02 base=3D00000000fee00000 len=3D0000000000100000 SMAP type=3D02 base=3D00000000ffb00000 len=3D0000000000500000 Copyright (c) 1992-2008 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 8.0-CURRENT #0: Fri Feb 15 16:13:31 PST 2008 root@dwolf-bsd.jnpr.net:/common/S4/obj/usr/src/sys/DWOLF WARNING: WITNESS option enabled, expect reduced performance. Preloaded elf kernel "/boot/kernel/kernel" at 0xc0f20000. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0f201d8. Calibrating clock(s) ... i8254 clock: 1193184 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 1995003150 Hz CPU: Intel(R) Core(TM)2 Duo CPU E4400 @ 2.00GHz (1995.00-MHz 686-class= CPU) Origin =3D "GenuineIntel" Id =3D 0x6fd Stepping =3D 13 Features=3D0xbfebfbff Features2=3D0xe39d AMD Features=3D0x20000000 AMD Features2=3D0x1 Cores per package: 2 Instruction TLB: 4 KB Pages, 4-way set associative, 128 entries 2nd-level cache: 2-MB, 8-way set associative, 64-byte line size 1st-level instruction cache: 32 KB, 8-way set associative, 64 byte line size 1st-level data cache: 32 KB, 8-way set associative, 64 byte line size L2 cache: 2048 kbytes, 8-way associative, 64 bytes/line real memory =3D 2102390784 (2004 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009dfff, 643072 bytes (157 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000001025000 - 0x000000007b365fff, 2050232320 bytes (500545 pages) avail memory =3D 2049662976 (1954 MB) Table 'FACP' at 0xfc72b Table 'SSDT' at 0xfff70f4c Table 'APIC' at 0xfc81f MADT: Found table at 0xfc81f MP Configuration Table version 1.4 found at 0xc00f0000 APIC: Using the MADT enumerator. MADT: Found CPU APIC ID 0 ACPI ID 1: enabled SMP: Added CPU 0 (AP) MADT: Found CPU APIC ID 1 ACPI ID 2: enabled SMP: Added CPU 1 (AP) MADT: Found CPU APIC ID 5 ACPI ID 3: disabled MADT: Found CPU APIC ID 7 ACPI ID 4: disabled MADT: Found CPU APIC ID 0 ACPI ID 5: disabled MADT: Found CPU APIC ID 1 ACPI ID 6: disabled MADT: Found CPU APIC ID 2 ACPI ID 7: disabled MADT: Found CPU APIC ID 3 ACPI ID 8: disabled ACPI APIC Table: INTR: Adding local APIC 1 as a target FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 bios32: Found BIOS32 Service Directory header at 0xc00ffe90 bios32: Entry =3D 0xffea0 (c00ffea0) Rev =3D 0 Len =3D 1 pcibios: PCI BIOS entry at 0xf0000+0xb09f pnpbios: Found PnP BIOS data at 0xc00fe2d0 pnpbios: Entry =3D f0000:e2f4 Rev =3D 1.0 Other BIOS signatures found: APIC: CPU 0 has ACPI ID 1 APIC: CPU 1 has ACPI ID 2 ULE: setup cpu group 0 ULE: setup cpu 0 ULE: adding cpu 0 to group 0: cpus 1 mask 0x1 ULE: setup cpu group 1 ULE: setup cpu 1 ULE: adding cpu 1 to group 1: cpus 1 mask 0x2 ACPI: RSDP @ 0x0xfec00/0x0024 (v 2 DELL ) ACPI: XSDT @ 0x0xfc5fb/0x008C (v 1 DELL B9K 0x0000000D ASL 0x00000= 061) ACPI: FACP @ 0x0xfc72b/0x00F4 (v 3 DELL B9K 0x0000000D ASL 0x00000= 061) ACPI: DSDT @ 0x0xfff6c8a7/0x4586 (v 1 DELL dt_ex 0x00001000 INTL 0x20= 050624) ACPI: FACS @ 0x0x7d4ff800/0x0040 ACPI: SSDT @ 0x0xfff70f4c/0x00AA (v 1 DELL st_ex 0x00001000 INTL 0x20= 050624) ACPI: APIC @ 0x0xfc81f/0x0092 (v 1 DELL B9K 0x0000000D ASL 0x00000= 061) ACPI: BOOT @ 0x0xfc8b1/0x0028 (v 1 DELL B9K 0x0000000D ASL 0x00000= 061) ACPI: ASF! @ 0x0xfc8d9/0x0096 (v 32 DELL B9K 0x0000000D ASL 0x00000= 061) ACPI: MCFG @ 0x0xfc96f/0x003E (v 1 DELL B9K 0x0000000D ASL 0x00000= 061) ACPI: HPET @ 0x0xfc9ad/0x0038 (v 1 DELL B9K 0x0000000D ASL 0x00000= 061) ACPI: TCPA @ 0x0xfcc09/0x0032 (v 1 DELL B9K 0x0000000D ASL 0x00000= 061) ACPI: ____ @ 0x0xfcc3b/0x0030 (v 1 DELL B9K 0x0000000D ASL 0x00000= 061) ACPI: SLIC @ 0x0xfc9e5/0x0176 (v 1 DELL B9K 0x0000000D ASL 0x00000= 061) ACPI: SSDT @ 0x0x7d4ff840/0x01B7 (v 1 DpgPmm Cpu0Ist 0x00000011 INTL 0x20= 050624) ACPI: SSDT @ 0x0x7d4ffc49/0x01B7 (v 1 DpgPmm Cpu1Ist 0x00000011 INTL 0x20= 050624) ACPI: SSDT @ 0x0x7d500052/0x0140 (v 1 DpgPmm CpuPm 0x00000010 INTL 0x20= 050624) MADT: Found IO APIC ID 8, Interrupt 0 at 0xfec00000 ioapic0: Changing APIC ID to 8 ioapic0: Routing external 8259A's -> intpin 0 MADT: Interrupt override: source 0, irq 2 ioapic0: Routing IRQ 0 -> intpin 2 MADT: Interrupt override: source 9, irq 9 ioapic0: intpin 9 trigger: level lapic: Routing NMI -> LINT1 lapic: LINT1 trigger: level lapic: LINT1 polarity: high ioapic0 irqs 0-23 on motherboard lapic0: Forcing LINT1 to edge trigger cpu0 BSP: ID: 0x00000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00008400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000 snd_unit_init() u=3D0x00ff8000 [512] d=3D0x00007c00 [32] c=3D0x000003ff [10= 24] feeder_register: snd_unit=3D-1 snd_maxautovchans=3D16 latency=3D5 feeder_bu= ffersize=3D16384 feeder_rate_min=3D1 feeder_rate_max=3D2016000 feeder_rate_= round=3D25 ath_rate: version 1.2 wlan_amrr: wlan: <802.11 Link Layer> kbd: new array size 4 kbd1 at kbdmux0 mem: Pentium Pro MTRR support enabled null: random: nfslock: pseudo-device io: ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2 (Feb 15 2008 16:11:= 52) npx0: INT 16 interface acpi0: on motherboard ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48 acpi0: [MPSAFE] acpi0: [ITHREAD] acpi0: Power Button (fixed) acpi0: wakeup code va 0xd8de3000 pa 0x1000 pci_open(1): mode 1 addr port (0x0cf8) is 0x80000098 pci_open(1a): mode1res=3D0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=3D060000] [hdr=3D00] is there (id=3D29b08086) pcibios: BIOS version 2.10 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: \_SB_.PCI0.ISA_.P40C -> bus 0 dev 31 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: \_SB_.PCI0.ISA_.P41C -> bus 0 dev 31 func 0 ACPI timer: 1/1 1/1 1/1 1/0 1/0 1/0 1/0 1/1 1/1 1/1 -> 10 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 pci_link0: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 3 4 5 6 7 9 10 11 12 15 Validation 0 11 N 0 3 4 5 6 7 9 10 11 12 15 After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 15 pci_link1: Index IRQ Rtd Ref IRQs Initial Probe 0 5 N 0 3 4 5 6 7 9 10 11 12 15 Validation 0 5 N 0 3 4 5 6 7 9 10 11 12 15 After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 15 pci_link2: Index IRQ Rtd Ref IRQs Initial Probe 0 9 N 0 3 4 5 6 7 9 10 11 12 15 Validation 0 9 N 0 3 4 5 6 7 9 10 11 12 15 After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 15 pci_link3: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 3 4 5 6 7 9 10 11 12 15 Validation 0 10 N 0 3 4 5 6 7 9 10 11 12 15 After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 15 pci_link4: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 6 7 9 10 11 12 15 Validation 0 255 N 0 3 4 5 6 7 9 10 11 12 15 After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 15 pci_link5: Index IRQ Rtd Ref IRQs Initial Probe 0 3 N 0 3 4 5 6 7 9 10 11 12 15 Validation 0 3 N 0 3 4 5 6 7 9 10 11 12 15 After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 15 pci_link6: Index IRQ Rtd Ref IRQs Initial Probe 0 5 N 0 3 4 5 6 7 9 10 11 12 15 Validation 0 5 N 0 3 4 5 6 7 9 10 11 12 15 After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 15 pci_link7: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 3 4 5 6 7 9 10 11 12 15 Validation 0 10 N 0 3 4 5 6 7 9 10 11 12 15 After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 15 acpi_hpet0: iomem 0xfed00000-0xfed003ff on acp= i0 acpi_hpet0: vend: 0x8086 rev: 0x1 num: 3 hz: 14318180 opts: legacy_route 64= -bit Timecounter "HPET" frequency 14318180 Hz quality 900 cpu0: on acpi0 cpu0: switching to generic Cx mode est0: on cpu0 p4tcc0: on cpu0 cpu1: on acpi0 est1: on cpu1 p4tcc1: on cpu1 acpi_button0: on acpi0 pcib0: port 0xcf8-0xcff on acpi0 pci0: on pcib0 pci0: domain=3D0, physical bus=3D0 found-> vendor=3D0x8086, dev=3D0x29b0, revid=3D0x02 domain=3D0, bus=3D0, slot=3D0, func=3D0 class=3D06-00-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0006, statreg=3D0x2090, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) found-> vendor=3D0x8086, dev=3D0x29b2, revid=3D0x02 domain=3D0, bus=3D0, slot=3D2, func=3D0 class=3D03-00-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0003, statreg=3D0x0090, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Da, irq=3D11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message map[10]: type Memory, range 32, base 0xfea00000, size 19, enabled map[14]: type I/O Port, range 32, base 0xec90, size 3, enabled map[18]: type Prefetchable Memory, range 32, base 0xd0000000, size 28, ena= bled map[1c]: type Memory, range 32, base 0xfeb00000, size 20, enabled pcib0: matched entry for 0.2.INTA pcib0: slot 2 INTA hardwired to IRQ 16 found-> vendor=3D0x8086, dev=3D0x29b3, revid=3D0x02 domain=3D0, bus=3D0, slot=3D2, func=3D1 class=3D03-80-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0007, statreg=3D0x0090, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xfea80000, size 19, enabled found-> vendor=3D0x8086, dev=3D0x29b4, revid=3D0x02 domain=3D0, bus=3D0, slot=3D3, func=3D0 class=3D07-80-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0006, statreg=3D0x0010, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Da, irq=3D11 powerspec 3 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 64, base 0xfedad000, size 4, enabled pcib0: matched entry for 0.3.INTA pcib0: slot 3 INTA hardwired to IRQ 16 found-> vendor=3D0x8086, dev=3D0x29b6, revid=3D0x02 domain=3D0, bus=3D0, slot=3D3, func=3D2 class=3D01-01-85, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0005, statreg=3D0x00b0, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Dc, irq=3D9 powerspec 3 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type I/O Port, range 32, base 0xfe80, size 3, enabled map[14]: type I/O Port, range 32, base 0xfe90, size 2, enabled map[18]: type I/O Port, range 32, base 0xfea0, size 3, enabled map[1c]: type I/O Port, range 32, base 0xfeb0, size 2, enabled map[20]: type I/O Port, range 32, base 0xfef0, size 4, enabled pcib0: matched entry for 0.3.INTC pcib0: slot 3 INTC hardwired to IRQ 18 found-> vendor=3D0x8086, dev=3D0x29b7, revid=3D0x02 domain=3D0, bus=3D0, slot=3D3, func=3D3 class=3D07-00-02, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0007, statreg=3D0x00b0, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Db, irq=3D5 powerspec 3 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type I/O Port, range 32, base 0xec98, size 3, enabled map[14]: type Memory, range 32, base 0xfe9da000, size 12, enabled pcib0: matched entry for 0.3.INTB pcib0: slot 3 INTB hardwired to IRQ 17 found-> vendor=3D0x8086, dev=3D0x10bd, revid=3D0x02 domain=3D0, bus=3D0, slot=3D25, func=3D0 class=3D02-00-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0107, statreg=3D0x0010, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Da, irq=3D3 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 32, base 0xfe9e0000, size 17, enabled map[14]: type Memory, range 32, base 0xfe9db000, size 12, enabled map[18]: type I/O Port, range 32, base 0xecc0, size 5, enabled pcib0: matched entry for 0.25.INTA pcib0: slot 25 INTA hardwired to IRQ 21 found-> vendor=3D0x8086, dev=3D0x2937, revid=3D0x02 domain=3D0, bus=3D0, slot=3D26, func=3D0 class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0005, statreg=3D0x0290, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Da, irq=3D11 map[20]: type I/O Port, range 32, base 0xff20, size 5, enabled pcib0: matched entry for 0.26.INTA pcib0: slot 26 INTA hardwired to IRQ 16 found-> vendor=3D0x8086, dev=3D0x2938, revid=3D0x02 domain=3D0, bus=3D0, slot=3D26, func=3D1 class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0005, statreg=3D0x0290, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Db, irq=3D5 map[20]: type I/O Port, range 32, base 0xff00, size 5, enabled pcib0: matched entry for 0.26.INTB pcib0: slot 26 INTB hardwired to IRQ 17 found-> vendor=3D0x8086, dev=3D0x293c, revid=3D0x02 domain=3D0, bus=3D0, slot=3D26, func=3D7 class=3D0c-03-20, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0106, statreg=3D0x0290, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Dc, irq=3D5 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xfe9d9c00, size 10, enabled pcib0: matched entry for 0.26.INTC pcib0: slot 26 INTC hardwired to IRQ 22 found-> vendor=3D0x8086, dev=3D0x293e, revid=3D0x02 domain=3D0, bus=3D0, slot=3D27, func=3D0 class=3D04-03-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0106, statreg=3D0x0010, cachelnsz=3D16 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Da, irq=3D11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 64, base 0xfe9dc000, size 14, enabled pcib0: matched entry for 0.27.INTA pcib0: slot 27 INTA hardwired to IRQ 16 found-> vendor=3D0x8086, dev=3D0x2940, revid=3D0x02 domain=3D0, bus=3D0, slot=3D28, func=3D0 class=3D06-04-00, hdrtype=3D0x01, mfdev=3D1 cmdreg=3D0x0107, statreg=3D0x0010, cachelnsz=3D16 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x02 (500 ns), maxlat=3D0x00 (0 ns) intpin=3Da, irq=3D11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message pcib0: matched entry for 0.28.INTA pcib0: slot 28 INTA hardwired to IRQ 16 found-> vendor=3D0x8086, dev=3D0x2934, revid=3D0x02 domain=3D0, bus=3D0, slot=3D29, func=3D0 class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0005, statreg=3D0x0290, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Da, irq=3D10 map[20]: type I/O Port, range 32, base 0xff80, size 5, enabled pcib0: matched entry for 0.29.INTA pcib0: slot 29 INTA hardwired to IRQ 23 found-> vendor=3D0x8086, dev=3D0x2935, revid=3D0x02 domain=3D0, bus=3D0, slot=3D29, func=3D1 class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0005, statreg=3D0x0290, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Db, irq=3D5 map[20]: type I/O Port, range 32, base 0xff60, size 5, enabled pcib0: matched entry for 0.29.INTB pcib0: slot 29 INTB hardwired to IRQ 17 found-> vendor=3D0x8086, dev=3D0x2936, revid=3D0x02 domain=3D0, bus=3D0, slot=3D29, func=3D2 class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0005, statreg=3D0x0290, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Dc, irq=3D9 map[20]: type I/O Port, range 32, base 0xff40, size 5, enabled pcib0: matched entry for 0.29.INTC pcib0: slot 29 INTC hardwired to IRQ 18 found-> vendor=3D0x8086, dev=3D0x293a, revid=3D0x02 domain=3D0, bus=3D0, slot=3D29, func=3D7 class=3D0c-03-20, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0106, statreg=3D0x0290, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Da, irq=3D10 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xff980800, size 10, enabled pcib0: matched entry for 0.29.INTA pcib0: slot 29 INTA hardwired to IRQ 23 found-> vendor=3D0x8086, dev=3D0x244e, revid=3D0x92 domain=3D0, bus=3D0, slot=3D30, func=3D0 class=3D06-04-01, hdrtype=3D0x01, mfdev=3D0 cmdreg=3D0x0107, statreg=3D0x0010, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x02 (500 ns), maxlat=3D0x00 (0 ns) found-> vendor=3D0x8086, dev=3D0x2914, revid=3D0x02 domain=3D0, bus=3D0, slot=3D31, func=3D0 class=3D06-01-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0107, statreg=3D0x0210, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) found-> vendor=3D0x8086, dev=3D0x2922, revid=3D0x02 domain=3D0, bus=3D0, slot=3D31, func=3D2 class=3D01-06-01, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0007, statreg=3D0x02b0, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Dc, irq=3D9 powerspec 3 supports D0 D3 current D0 MSI supports 16 messages map[10]: type I/O Port, range 32, base 0xfe00, size 3, enabled map[14]: type I/O Port, range 32, base 0xfe10, size 2, enabled map[18]: type I/O Port, range 32, base 0xfe20, size 3, enabled map[1c]: type I/O Port, range 32, base 0xfe30, size 2, enabled map[20]: type I/O Port, range 32, base 0xfec0, size 5, enabled map[24]: type Memory, range 32, base 0xff970000, size 11, enabled pcib0: matched entry for 0.31.INTC pcib0: slot 31 INTC hardwired to IRQ 18 found-> vendor=3D0x8086, dev=3D0x2930, revid=3D0x02 domain=3D0, bus=3D0, slot=3D31, func=3D3 class=3D0c-05-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0103, statreg=3D0x0280, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Dc, irq=3D9 map[10]: type Memory, range 64, base 0xfe9d9b00, size 8, enabled map[20]: type I/O Port, range 32, base 0xece0, size 5, enabled pcib0: matched entry for 0.31.INTC pcib0: slot 31 INTC hardwired to IRQ 18 vgapci0: port 0xec90-0xec97 mem 0xfea00000-0xfea7f= fff,0xd0000000-0xdfffffff,0xfeb00000-0xfebfffff irq 16 at device 2.0 on pci0 vgapci1: mem 0xfea80000-0xfeafffff at device 2.1 o= n pci0 pci0: at device 3.0 (no driver attached) atapci0: port 0xfe80-0xfe87,0xfe90-0xfe93,0xfea0-0xf= ea7,0xfeb0-0xfeb3,0xfef0-0xfeff irq 18 at device 3.2 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xfef0 ioapic0: routing intpin 18 (PCI IRQ 18) to vector 49 atapci0: [MPSAFE] atapci0: [ITHREAD] ata2: on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0xfe80 atapci0: Reserved 0x4 bytes for rid 0x14 type 4 at 0xfe90 ata2: reset tp1 mask=3D03 ostat0=3D7f ostat1=3D7f ata2: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f ata2: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f ata2: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f ata2: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f ata2: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f ata2: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f ata2: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f ata2: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f ata2: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f ata2: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f ata2: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f ata2: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f ata2: stat1=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f ata2: reset tp2 stat0=3Dff stat1=3Dff devices=3D0x0 ata2: [MPSAFE] ata2: [ITHREAD] ata3: on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0xfea0 atapci0: Reserved 0x4 bytes for rid 0x1c type 4 at 0xfeb0 ata3: reset tp1 mask=3D03 ostat0=3D7f ostat1=3D7f ata3: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f ata3: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f ata3: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f ata3: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f ata3: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f ata3: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f ata3: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f ata3: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f ata3: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f ata3: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f ata3: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f ata3: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f ata3: stat1=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f ata3: reset tp2 stat0=3Dff stat1=3Dff devices=3D0x0 ata3: [MPSAFE] ata3: [ITHREAD] pci0: at device 3.3 (no driver attached) em0: port 0xecc0-0xe= cdf mem 0xfe9e0000-0xfe9fffff,0xfe9db000-0xfe9dbfff irq 21 at device 25.0 o= n pci0 em0: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xfe9e0000 em0: attempting to allocate 1 MSI vectors (1 supported) msi: routing MSI IRQ 256 to vector 50 em0: using IRQ 256 for MSI em0: Using MSI interrupt em0: Reserved 0x1000 bytes for rid 0x14 type 3 at 0xfe9db000 em0: bpf attached em0: Ethernet address: 00:1a:a0:62:96:09 em0: [FILTER] uhci0: port 0xff20-0xff3f irq 16 at device = 26.0 on pci0 uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xff20 ioapic0: routing intpin 16 (PCI IRQ 16) to vector 51 uhci0: [GIANT-LOCKED] uhci0: [ITHREAD] usb0: on uhci0 usb0: USB revision 1.0 uhub0: on usb0 uhub0: 2 ports with 2 removable, self powered uhci1: port 0xff00-0xff1f irq 17 at device = 26.1 on pci0 uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xff00 ioapic0: routing intpin 17 (PCI IRQ 17) to vector 52 uhci1: [GIANT-LOCKED] uhci1: [ITHREAD] usb1: on uhci1 usb1: USB revision 1.0 uhub1: on usb1 uhub1: 2 ports with 2 removable, self powered ehci0: mem 0xfe9d9c00-0xfe9d9fff irq 22= at device 26.7 on pci0 ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xfe9d9c00 ioapic0: routing intpin 22 (PCI IRQ 22) to vector 53 ehci0: [GIANT-LOCKED] ehci0: [ITHREAD] usb2: waiting for BIOS to give up control usb2: EHCI version 1.0 usb2: wrong number of companions (3 !=3D 2) usb2: companion controllers, 2 ports each: usb0 usb1 usb2: on ehci0 usb2: USB revision 2.0 uhub2: on usb2 uhub2: 6 ports with 6 removable, self powered pcm0: mem 0xfe9dc000-0xfe9d= ffff irq 16 at device 27.0 on pci0 pcm0: TCSEL: 0x07 -> 0x00 pcm0: DMA Coherency: Uncacheable / vendor=3D0x8086 pcm0: Reserved 0x4000 bytes for rid 0x10 type 3 at 0xfe9dc000 pcm0: [MPSAFE] pcm0: [ITHREAD] pcm0: hdac_dma_alloc: size=3D1024 -> roundsz=3D1024 pcm0: hdac_dma_alloc: size=3D2048 -> roundsz=3D2048 pcib1: irq 16 at device 28.0 on pci0 pcib1: domain 0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xf000-0xfff pcib1: memory decode 0xfe800000-0xfe8fffff pcib1: no prefetched decode pci1: on pcib1 pci1: domain=3D0, physical bus=3D1 uhci2: port 0xff80-0xff9f irq 23 at device = 29.0 on pci0 uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0xff80 ioapic0: routing intpin 23 (PCI IRQ 23) to vector 54 uhci2: [GIANT-LOCKED] uhci2: [ITHREAD] usb3: on uhci2 usb3: USB revision 1.0 uhub3: on usb3 uhub3: 2 ports with 2 removable, self powered uhci3: port 0xff60-0xff7f irq 17 at device = 29.1 on pci0 uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0xff60 uhci3: [GIANT-LOCKED] uhci3: [ITHREAD] usb4: on uhci3 usb4: USB revision 1.0 uhub4: on usb4 uhub4: 2 ports with 2 removable, self powered uhci4: port 0xff40-0xff5f irq 18 at device = 29.2 on pci0 uhci4: Reserved 0x20 bytes for rid 0x20 type 4 at 0xff40 uhci4: [GIANT-LOCKED] uhci4: [ITHREAD] usb5: on uhci4 usb5: USB revision 1.0 uhub5: on usb5 uhub5: 2 ports with 2 removable, self powered ehci1: mem 0xff980800-0xff980bff irq 23= at device 29.7 on pci0 ehci1: Reserved 0x400 bytes for rid 0x10 type 3 at 0xff980800 ehci1: [GIANT-LOCKED] ehci1: [ITHREAD] usb6: waiting for BIOS to give up control usb6: timed out waiting for BIOS usb6: EHCI version 1.0 usb6: companion controllers, 2 ports each: usb3 usb4 usb5 usb6: on ehci1 usb6: USB revision 2.0 uhub6: on usb6 uhub6: 6 ports with 6 removable, self powered pcib2: at device 30.0 on pci0 pcib2: domain 0 pcib2: secondary bus 2 pcib2: subordinate bus 2 pcib2: I/O decode 0xf000-0xfff pcib2: no prefetched decode pcib2: Subtractively decoded bridge. --T3szOYASPyCoAfS0 Content-Type: text/plain; charset=iso-8859-1 Content-Disposition: attachment; filename=console_755-nohang Content-Transfer-Encoding: quoted-printable /boot.config: -DP/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\= =08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08= -=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|= =08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08Cons= oles: internal video/keyboard serial port =20 BIOS drive A: is disk0 BIOS drive C: is disk1 BIOS 633kB/2052094kB available memory FreeBSD/i386 bootstrap loader, Revision 1.1 (root@dwolf-lnx.jnpr.net, Tue Feb 12 23:46:19 UTC 2008) |=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-= =08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08= /=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\= =08|=08/=08-=08\=08Loading /boot/defaults/loader.conf=20 |=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-= =08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08= /=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\= =08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08= -=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|= =08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08= \=08|=08/=08-=08\=08/boot/kernel/kernel text=3D0x7e7224 |=08/=08-=08\=08|= =08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08= \=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/= =08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08= |=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-= =08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08= /=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\= =08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08= -=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|= =08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08= \=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/= =08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08= |=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-= =08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08= /=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\= =08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08= -=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|= =08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08= \=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/= =08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08= |=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-= =08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08= /=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\= =08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08= -=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|= =08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08= \=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/= =08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08= |=08/=08data=3D0xd3fc0+0xab73c -=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08= /=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\= =08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08= -=08\=08|=08/=08-=08\=08syms=3D[0x4+0x8d6f0|=08/=08-=08\=08|=08/=08-=08\=08= |=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-= =08\=08|=08/=08-=08\=08|=08/=08-=08+0x4+0xbce97\=08|=08/=08-=08\=08|=08/=08= -=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|= =08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08= \=08|=08/=08-=08] \=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/= =08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08= |=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-= =08\=08=1B[H=1B[J=1B[4;46H ______=1B[5;46H | ____| __ ___ ___ =1B[= 6;46H | |__ | '__/ _ \/ _ \=1B[7;46H | __|| | | __/ __/=1B[8;46H = | | | | | | |=1B[9;46H |_| |_| \___|\___|=1B[10;46H ___= _ _____ _____=1B[11;46H | _ \ / ____| __ \=1B[12;46H | |_) | (___= | | | |=1B[13;46H | _ < \___ \| | | |=1B[14;46H | |_) |____) | |_= _| |=1B[15;46H | | | |=1B[16;46H |____/|_____/|_____/= =1B[3;2H=B3=1B[4;2H=B3=1B[5;2H=B3=1B[6;2H=B3=1B[7;2H=B3=1B[8;2H=B3=1B[9;2H= =B3=1B[10;2H=B3=1B[11;2H=B3=1B[12;2H=B3=1B[13;2H=B3=1B[14;2H=B3=1B[15;2H=B3= =1B[16;2H=B3=1B[17;2H=B3=1B[18;2H=B3=1B[19;2H=B3=1B[20;2H=B3=1B[21;2H=B3=1B= [3;44H=B3=1B[4;44H=B3=1B[5;44H=B3=1B[6;44H=B3=1B[7;44H=B3=1B[8;44H=B3=1B[9;= 44H=B3=1B[10;44H=B3=1B[11;44H=B3=1B[12;44H=B3=1B[13;44H=B3=1B[14;44H=B3=1B[= 15;44H=B3=1B[16;44H=B3=1B[17;44H=B3=1B[18;44H=B3=1B[19;44H=B3=1B[20;44H=B3= =1B[21;44H=B3=1B[2;3H=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4= =C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=1B[22= ;3H=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4= =C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=1B[2;2H=DA=1B[22;2H=C0= =1B[2;44H=BF=1B[22;44H=D9=1B[6;13HWelcome to FreeBSD!=1B[9;5H1 =1B[9;6H. Bo= ot FreeBSD [default]=1B[10;5H2 =1B[10;6H. Boot FreeBSD with ACPI disabled= =1B[11;5H3 =1B[11;6H. Boot FreeBSD in Safe Mode=1B[12;5H4 =1B[12;6H. Boot F= reeBSD in single user mode=1B[13;5H5 =1B[13;6H. Boot FreeBSD with verbose l= ogging=1B[14;5H6 =1B[14;6H. Escape to loader prompt=1B[15;5H7 =1B[15;6H. Re= boot=1B[20;5HSelect option, [Enter] for default=1B[21;5Hor [Space] to pause= timer =1B[21;32H10 =1B[21;32H10 =1B[21;32H10 =1B[21;32H10 =1B[21;32H10 = =1B[21;32H10 =1B[21;32H10 =1B[21;32H9 =1B[21;32H9 =1B[21;32H9 =1B[21;32H9 = =1B[21;32H9 =1B[21;32H9 =1B[21;32H9 =1B[21;32H9 =1B[21;32H9 =1B[21;32H9 =1B= [25;0H|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/= =08-=08\=08|=08/=08-=08\=08|=08/boot/kernel/acpi.ko text=3D0x53d6c /=08-=08= \=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/= =08data=3D0x25e0+0x186c -=08\=08syms=3D[0x4+0x89f0|=08/=08+0x4+0xbb87-=08\= =08|=08] /=08-=08\=08|=08/=08-=08\=08|=08/=08-=08GDB: no debug ports present KDB: debugger backends: ddb KDB: current backend: ddb SMAP type=3D01 base=3D0000000000000000 len=3D000000000009e400 SMAP type=3D02 base=3D00000000000f0000 len=3D0000000000010000 SMAP type=3D01 base=3D0000000000100000 len=3D000000007d3ff800 SMAP type=3D04 base=3D000000007d4ff800 len=3D0000000000054400 SMAP type=3D03 base=3D000000007d553c00 len=3D0000000000002000 SMAP type=3D02 base=3D000000007d555c00 len=3D0000000000aaa400 SMAP type=3D02 base=3D00000000e0000000 len=3D0000000010000000 SMAP type=3D02 base=3D00000000f0000000 len=3D000000000ec00000 SMAP type=3D02 base=3D00000000fed00000 len=3D0000000000000400 SMAP type=3D02 base=3D00000000fed20000 len=3D0000000000080000 SMAP type=3D02 base=3D00000000fec00000 len=3D0000000000100000 SMAP type=3D02 base=3D00000000fee00000 len=3D0000000000100000 SMAP type=3D02 base=3D00000000ffb00000 len=3D0000000000500000 Copyright (c) 1992-2008 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 8.0-CURRENT #0: Fri Feb 15 16:13:31 PST 2008 root@dwolf-bsd.jnpr.net:/common/S4/obj/usr/src/sys/DWOLF WARNING: WITNESS option enabled, expect reduced performance. Preloaded elf kernel "/boot/kernel/kernel" at 0xc0f20000. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0f201d8. Calibrating clock(s) ... i8254 clock: 1193179 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 1994998380 Hz CPU: Intel(R) Core(TM)2 Duo CPU E4400 @ 2.00GHz (1995.00-MHz 686-class= CPU) Origin =3D "GenuineIntel" Id =3D 0x6fd Stepping =3D 13 Features=3D0xbfebfbff Features2=3D0xe39d AMD Features=3D0x20000000 AMD Features2=3D0x1 Cores per package: 2 Instruction TLB: 4 KB Pages, 4-way set associative, 128 entries 2nd-level cache: 2-MB, 8-way set associative, 64-byte line size 1st-level instruction cache: 32 KB, 8-way set associative, 64 byte line size 1st-level data cache: 32 KB, 8-way set associative, 64 byte line size L2 cache: 2048 kbytes, 8-way associative, 64 bytes/line real memory =3D 2102390784 (2004 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009dfff, 643072 bytes (157 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000001025000 - 0x000000007b365fff, 2050232320 bytes (500545 pages) avail memory =3D 2049662976 (1954 MB) Table 'FACP' at 0xfc72b Table 'SSDT' at 0xfff70f4c Table 'APIC' at 0xfc81f MADT: Found table at 0xfc81f MP Configuration Table version 1.4 found at 0xc00f0000 APIC: Using the MADT enumerator. MADT: Found CPU APIC ID 0 ACPI ID 1: enabled SMP: Added CPU 0 (AP) MADT: Found CPU APIC ID 1 ACPI ID 2: enabled SMP: Added CPU 1 (AP) MADT: Found CPU APIC ID 5 ACPI ID 3: disabled MADT: Found CPU APIC ID 7 ACPI ID 4: disabled MADT: Found CPU APIC ID 0 ACPI ID 5: disabled MADT: Found CPU APIC ID 1 ACPI ID 6: disabled MADT: Found CPU APIC ID 2 ACPI ID 7: disabled MADT: Found CPU APIC ID 3 ACPI ID 8: disabled ACPI APIC Table: INTR: Adding local APIC 1 as a target FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 bios32: Found BIOS32 Service Directory header at 0xc00ffe90 bios32: Entry =3D 0xffea0 (c00ffea0) Rev =3D 0 Len =3D 1 pcibios: PCI BIOS entry at 0xf0000+0xb09f pnpbios: Found PnP BIOS data at 0xc00fe2d0 pnpbios: Entry =3D f0000:e2f4 Rev =3D 1.0 Other BIOS signatures found: APIC: CPU 0 has ACPI ID 1 APIC: CPU 1 has ACPI ID 2 ULE: setup cpu group 0 ULE: setup cpu 0 ULE: adding cpu 0 to group 0: cpus 1 mask 0x1 ULE: setup cpu group 1 ULE: setup cpu 1 ULE: adding cpu 1 to group 1: cpus 1 mask 0x2 ACPI: RSDP @ 0x0xfec00/0x0024 (v 2 DELL ) ACPI: XSDT @ 0x0xfc5fb/0x008C (v 1 DELL B9K 0x0000000D ASL 0x00000= 061) ACPI: FACP @ 0x0xfc72b/0x00F4 (v 3 DELL B9K 0x0000000D ASL 0x00000= 061) ACPI: DSDT @ 0x0xfff6c8a7/0x4586 (v 1 DELL dt_ex 0x00001000 INTL 0x20= 050624) ACPI: FACS @ 0x0x7d4ff800/0x0040 ACPI: SSDT @ 0x0xfff70f4c/0x00AA (v 1 DELL st_ex 0x00001000 INTL 0x20= 050624) ACPI: APIC @ 0x0xfc81f/0x0092 (v 1 DELL B9K 0x0000000D ASL 0x00000= 061) ACPI: BOOT @ 0x0xfc8b1/0x0028 (v 1 DELL B9K 0x0000000D ASL 0x00000= 061) ACPI: ASF! @ 0x0xfc8d9/0x0096 (v 32 DELL B9K 0x0000000D ASL 0x00000= 061) ACPI: MCFG @ 0x0xfc96f/0x003E (v 1 DELL B9K 0x0000000D ASL 0x00000= 061) ACPI: HPET @ 0x0xfc9ad/0x0038 (v 1 DELL B9K 0x0000000D ASL 0x00000= 061) ACPI: TCPA @ 0x0xfcc09/0x0032 (v 1 DELL B9K 0x0000000D ASL 0x00000= 061) ACPI: ____ @ 0x0xfcc3b/0x0030 (v 1 DELL B9K 0x0000000D ASL 0x00000= 061) ACPI: SLIC @ 0x0xfc9e5/0x0176 (v 1 DELL B9K 0x0000000D ASL 0x00000= 061) ACPI: SSDT @ 0x0x7d4ff840/0x01B7 (v 1 DpgPmm Cpu0Ist 0x00000011 INTL 0x20= 050624) ACPI: SSDT @ 0x0x7d4ffc49/0x01B7 (v 1 DpgPmm Cpu1Ist 0x00000011 INTL 0x20= 050624) ACPI: SSDT @ 0x0x7d500052/0x0140 (v 1 DpgPmm CpuPm 0x00000010 INTL 0x20= 050624) MADT: Found IO APIC ID 8, Interrupt 0 at 0xfec00000 ioapic0: Changing APIC ID to 8 ioapic0: Routing external 8259A's -> intpin 0 MADT: Interrupt override: source 0, irq 2 ioapic0: Routing IRQ 0 -> intpin 2 MADT: Interrupt override: source 9, irq 9 ioapic0: intpin 9 trigger: level lapic: Routing NMI -> LINT1 lapic: LINT1 trigger: level lapic: LINT1 polarity: high ioapic0 irqs 0-23 on motherboard lapic0: Forcing LINT1 to edge trigger cpu0 BSP: ID: 0x00000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00008400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000 snd_unit_init() u=3D0x00ff8000 [512] d=3D0x00007c00 [32] c=3D0x000003ff [10= 24] feeder_register: snd_unit=3D-1 snd_maxautovchans=3D16 latency=3D5 feeder_bu= ffersize=3D16384 feeder_rate_min=3D1 feeder_rate_max=3D2016000 feeder_rate_= round=3D25 ath_rate: version 1.2 wlan_amrr: wlan: <802.11 Link Layer> kbd: new array size 4 kbd1 at kbdmux0 mem: Pentium Pro MTRR support enabled null: random: nfslock: pseudo-device io: ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2 (Feb 15 2008 16:11:= 52) npx0: INT 16 interface acpi0: on motherboard ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48 acpi0: [MPSAFE] acpi0: [ITHREAD] acpi0: Power Button (fixed) acpi0: wakeup code va 0xd8de3000 pa 0x1000 pci_open(1): mode 1 addr port (0x0cf8) is 0x80000098 pci_open(1a): mode1res=3D0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=3D060000] [hdr=3D00] is there (id=3D29b08086) pcibios: BIOS version 2.10 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: \_SB_.PCI0.ISA_.P40C -> bus 0 dev 31 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: \_SB_.PCI0.ISA_.P41C -> bus 0 dev 31 func 0 ACPI timer: 1/1 1/1 1/1 1/0 1/1 1/1 1/1 1/0 1/1 1/0 -> 10 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 pci_link0: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 3 4 5 6 7 9 10 11 12 15 Validation 0 11 N 0 3 4 5 6 7 9 10 11 12 15 After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 15 pci_link1: Index IRQ Rtd Ref IRQs Initial Probe 0 5 N 0 3 4 5 6 7 9 10 11 12 15 Validation 0 5 N 0 3 4 5 6 7 9 10 11 12 15 After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 15 pci_link2: Index IRQ Rtd Ref IRQs Initial Probe 0 9 N 0 3 4 5 6 7 9 10 11 12 15 Validation 0 9 N 0 3 4 5 6 7 9 10 11 12 15 After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 15 pci_link3: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 3 4 5 6 7 9 10 11 12 15 Validation 0 10 N 0 3 4 5 6 7 9 10 11 12 15 After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 15 pci_link4: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 6 7 9 10 11 12 15 Validation 0 255 N 0 3 4 5 6 7 9 10 11 12 15 After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 15 pci_link5: Index IRQ Rtd Ref IRQs Initial Probe 0 3 N 0 3 4 5 6 7 9 10 11 12 15 Validation 0 3 N 0 3 4 5 6 7 9 10 11 12 15 After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 15 pci_link6: Index IRQ Rtd Ref IRQs Initial Probe 0 5 N 0 3 4 5 6 7 9 10 11 12 15 Validation 0 5 N 0 3 4 5 6 7 9 10 11 12 15 After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 15 pci_link7: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 3 4 5 6 7 9 10 11 12 15 Validation 0 10 N 0 3 4 5 6 7 9 10 11 12 15 After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 15 acpi_hpet0: iomem 0xfed00000-0xfed003ff on acp= i0 acpi_hpet0: vend: 0x8086 rev: 0x1 num: 3 hz: 14318180 opts: legacy_route 64= -bit Timecounter "HPET" frequency 14318180 Hz quality 900 cpu0: on acpi0 cpu0: switching to generic Cx mode est0: on cpu0 p4tcc0: on cpu0 cpu1: on acpi0 est1: on cpu1 p4tcc1: on cpu1 acpi_button0: on acpi0 pcib0: port 0xcf8-0xcff on acpi0 pci0: on pcib0 pci0: domain=3D0, physical bus=3D0 found-> vendor=3D0x8086, dev=3D0x29b0, revid=3D0x02 domain=3D0, bus=3D0, slot=3D0, func=3D0 class=3D06-00-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0006, statreg=3D0x2090, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) found-> vendor=3D0x8086, dev=3D0x29b2, revid=3D0x02 domain=3D0, bus=3D0, slot=3D2, func=3D0 class=3D03-00-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0003, statreg=3D0x0090, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Da, irq=3D11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message map[10]: type Memory, range 32, base 0xfea00000, size 19, enabled map[14]: type I/O Port, range 32, base 0xec90, size 3, enabled map[18]: type Prefetchable Memory, range 32, base 0xd0000000, size 28, ena= bled map[1c]: type Memory, range 32, base 0xfeb00000, size 20, enabled pcib0: matched entry for 0.2.INTA pcib0: slot 2 INTA hardwired to IRQ 16 found-> vendor=3D0x8086, dev=3D0x29b3, revid=3D0x02 domain=3D0, bus=3D0, slot=3D2, func=3D1 class=3D03-80-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0007, statreg=3D0x0090, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xfea80000, size 19, enabled found-> vendor=3D0x8086, dev=3D0x29b4, revid=3D0x02 domain=3D0, bus=3D0, slot=3D3, func=3D0 class=3D07-80-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0006, statreg=3D0x0010, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Da, irq=3D11 powerspec 3 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 64, base 0xfedad000, size 4, enabled pcib0: matched entry for 0.3.INTA pcib0: slot 3 INTA hardwired to IRQ 16 found-> vendor=3D0x8086, dev=3D0x29b6, revid=3D0x02 domain=3D0, bus=3D0, slot=3D3, func=3D2 class=3D01-01-85, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0005, statreg=3D0x00b0, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Dc, irq=3D9 powerspec 3 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type I/O Port, range 32, base 0xfe80, size 3, enabled map[14]: type I/O Port, range 32, base 0xfe90, size 2, enabled map[18]: type I/O Port, range 32, base 0xfea0, size 3, enabled map[1c]: type I/O Port, range 32, base 0xfeb0, size 2, enabled map[20]: type I/O Port, range 32, base 0xfef0, size 4, enabled pcib0: matched entry for 0.3.INTC pcib0: slot 3 INTC hardwired to IRQ 18 found-> vendor=3D0x8086, dev=3D0x29b7, revid=3D0x02 domain=3D0, bus=3D0, slot=3D3, func=3D3 class=3D07-00-02, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0007, statreg=3D0x00b0, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Db, irq=3D5 powerspec 3 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type I/O Port, range 32, base 0xec98, size 3, enabled map[14]: type Memory, range 32, base 0xfe9da000, size 12, enabled pcib0: matched entry for 0.3.INTB pcib0: slot 3 INTB hardwired to IRQ 17 found-> vendor=3D0x8086, dev=3D0x10bd, revid=3D0x02 domain=3D0, bus=3D0, slot=3D25, func=3D0 class=3D02-00-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0107, statreg=3D0x0010, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Da, irq=3D3 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 32, base 0xfe9e0000, size 17, enabled map[14]: type Memory, range 32, base 0xfe9db000, size 12, enabled map[18]: type I/O Port, range 32, base 0xecc0, size 5, enabled pcib0: matched entry for 0.25.INTA pcib0: slot 25 INTA hardwired to IRQ 21 found-> vendor=3D0x8086, dev=3D0x2937, revid=3D0x02 domain=3D0, bus=3D0, slot=3D26, func=3D0 class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0005, statreg=3D0x0290, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Da, irq=3D11 map[20]: type I/O Port, range 32, base 0xff20, size 5, enabled pcib0: matched entry for 0.26.INTA pcib0: slot 26 INTA hardwired to IRQ 16 found-> vendor=3D0x8086, dev=3D0x2938, revid=3D0x02 domain=3D0, bus=3D0, slot=3D26, func=3D1 class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0005, statreg=3D0x0290, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Db, irq=3D5 map[20]: type I/O Port, range 32, base 0xff00, size 5, enabled pcib0: matched entry for 0.26.INTB pcib0: slot 26 INTB hardwired to IRQ 17 found-> vendor=3D0x8086, dev=3D0x293c, revid=3D0x02 domain=3D0, bus=3D0, slot=3D26, func=3D7 class=3D0c-03-20, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0106, statreg=3D0x0290, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Dc, irq=3D5 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xfe9d9c00, size 10, enabled pcib0: matched entry for 0.26.INTC pcib0: slot 26 INTC hardwired to IRQ 22 found-> vendor=3D0x8086, dev=3D0x293e, revid=3D0x02 domain=3D0, bus=3D0, slot=3D27, func=3D0 class=3D04-03-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0106, statreg=3D0x0010, cachelnsz=3D16 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Da, irq=3D11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 64, base 0xfe9dc000, size 14, enabled pcib0: matched entry for 0.27.INTA pcib0: slot 27 INTA hardwired to IRQ 16 found-> vendor=3D0x8086, dev=3D0x2940, revid=3D0x02 domain=3D0, bus=3D0, slot=3D28, func=3D0 class=3D06-04-00, hdrtype=3D0x01, mfdev=3D1 cmdreg=3D0x0107, statreg=3D0x0010, cachelnsz=3D16 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x02 (500 ns), maxlat=3D0x00 (0 ns) intpin=3Da, irq=3D11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message pcib0: matched entry for 0.28.INTA pcib0: slot 28 INTA hardwired to IRQ 16 found-> vendor=3D0x8086, dev=3D0x2934, revid=3D0x02 domain=3D0, bus=3D0, slot=3D29, func=3D0 class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0005, statreg=3D0x0290, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Da, irq=3D10 map[20]: type I/O Port, range 32, base 0xff80, size 5, enabled pcib0: matched entry for 0.29.INTA pcib0: slot 29 INTA hardwired to IRQ 23 found-> vendor=3D0x8086, dev=3D0x2935, revid=3D0x02 domain=3D0, bus=3D0, slot=3D29, func=3D1 class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0005, statreg=3D0x0290, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Db, irq=3D5 map[20]: type I/O Port, range 32, base 0xff60, size 5, enabled pcib0: matched entry for 0.29.INTB pcib0: slot 29 INTB hardwired to IRQ 17 found-> vendor=3D0x8086, dev=3D0x2936, revid=3D0x02 domain=3D0, bus=3D0, slot=3D29, func=3D2 class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0005, statreg=3D0x0290, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Dc, irq=3D9 map[20]: type I/O Port, range 32, base 0xff40, size 5, enabled pcib0: matched entry for 0.29.INTC pcib0: slot 29 INTC hardwired to IRQ 18 found-> vendor=3D0x8086, dev=3D0x293a, revid=3D0x02 domain=3D0, bus=3D0, slot=3D29, func=3D7 class=3D0c-03-20, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0106, statreg=3D0x0290, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Da, irq=3D10 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xff980800, size 10, enabled pcib0: matched entry for 0.29.INTA pcib0: slot 29 INTA hardwired to IRQ 23 found-> vendor=3D0x8086, dev=3D0x244e, revid=3D0x92 domain=3D0, bus=3D0, slot=3D30, func=3D0 class=3D06-04-01, hdrtype=3D0x01, mfdev=3D0 cmdreg=3D0x0107, statreg=3D0x0010, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x02 (500 ns), maxlat=3D0x00 (0 ns) found-> vendor=3D0x8086, dev=3D0x2914, revid=3D0x02 domain=3D0, bus=3D0, slot=3D31, func=3D0 class=3D06-01-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0107, statreg=3D0x0210, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) found-> vendor=3D0x8086, dev=3D0x2922, revid=3D0x02 domain=3D0, bus=3D0, slot=3D31, func=3D2 class=3D01-06-01, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0007, statreg=3D0x02b0, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Dc, irq=3D9 powerspec 3 supports D0 D3 current D0 MSI supports 16 messages map[10]: type I/O Port, range 32, base 0xfe00, size 3, enabled map[14]: type I/O Port, range 32, base 0xfe10, size 2, enabled map[18]: type I/O Port, range 32, base 0xfe20, size 3, enabled map[1c]: type I/O Port, range 32, base 0xfe30, size 2, enabled map[20]: type I/O Port, range 32, base 0xfec0, size 5, enabled map[24]: type Memory, range 32, base 0xff970000, size 11, enabled pcib0: matched entry for 0.31.INTC pcib0: slot 31 INTC hardwired to IRQ 18 found-> vendor=3D0x8086, dev=3D0x2930, revid=3D0x02 domain=3D0, bus=3D0, slot=3D31, func=3D3 class=3D0c-05-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0103, statreg=3D0x0280, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Dc, irq=3D9 map[10]: type Memory, range 64, base 0xfe9d9b00, size 8, enabled map[20]: type I/O Port, range 32, base 0xece0, size 5, enabled pcib0: matched entry for 0.31.INTC pcib0: slot 31 INTC hardwired to IRQ 18 vgapci0: port 0xec90-0xec97 mem 0xfea00000-0xfea7f= fff,0xd0000000-0xdfffffff,0xfeb00000-0xfebfffff irq 16 at device 2.0 on pci0 vgapci1: mem 0xfea80000-0xfeafffff at device 2.1 o= n pci0 pci0: at device 3.0 (no driver attached) atapci0: port 0xfe80-0xfe87,0xfe90-0xfe93,0xfea0-0xf= ea7,0xfeb0-0xfeb3,0xfef0-0xfeff irq 18 at device 3.2 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xfef0 ioapic0: routing intpin 18 (PCI IRQ 18) to vector 49 atapci0: [MPSAFE] atapci0: [ITHREAD] ata2: on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0xfe80 atapci0: Reserved 0x4 bytes for rid 0x14 type 4 at 0xfe90 ata2: reset tp1 mask=3D03 ostat0=3D7f ostat1=3D7f ata2: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f ata2: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f ata2: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f ata2: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f ata2: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f ata2: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f ata2: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f ata2: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f ata2: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f ata2: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f ata2: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f ata2: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f ata2: stat1=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f ata2: reset tp2 stat0=3Dff stat1=3Dff devices=3D0x0 ata2: [MPSAFE] ata2: [ITHREAD] ata3: on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0xfea0 atapci0: Reserved 0x4 bytes for rid 0x1c type 4 at 0xfeb0 ata3: reset tp1 mask=3D03 ostat0=3D7f ostat1=3D7f ata3: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f ata3: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f ata3: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f ata3: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f ata3: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f ata3: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f ata3: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f ata3: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f ata3: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f ata3: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f ata3: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f ata3: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f ata3: stat1=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f ata3: reset tp2 stat0=3Dff stat1=3Dff devices=3D0x0 ata3: [MPSAFE] ata3: [ITHREAD] pci0: at device 3.3 (no driver attached) em0: port 0xecc0-0xe= cdf mem 0xfe9e0000-0xfe9fffff,0xfe9db000-0xfe9dbfff irq 21 at device 25.0 o= n pci0 em0: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xfe9e0000 em0: attempting to allocate 1 MSI vectors (1 supported) msi: routing MSI IRQ 256 to vector 50 em0: using IRQ 256 for MSI em0: Using MSI interrupt em0: Reserved 0x1000 bytes for rid 0x14 type 3 at 0xfe9db000 em0: bpf attached em0: Ethernet address: 00:1a:a0:62:96:09 em0: [FILTER] uhci0: port 0xff20-0xff3f irq 16 at device = 26.0 on pci0 uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xff20 ioapic0: routing intpin 16 (PCI IRQ 16) to vector 51 uhci0: [GIANT-LOCKED] uhci0: [ITHREAD] usb0: on uhci0 usb0: USB revision 1.0 uhub0: on usb0 uhub0: 2 ports with 2 removable, self powered uhci1: port 0xff00-0xff1f irq 17 at device = 26.1 on pci0 uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xff00 ioapic0: routing intpin 17 (PCI IRQ 17) to vector 52 uhci1: [GIANT-LOCKED] uhci1: [ITHREAD] usb1: on uhci1 usb1: USB revision 1.0 uhub1: on usb1 uhub1: 2 ports with 2 removable, self powered ehci0: mem 0xfe9d9c00-0xfe9d9fff irq 22= at device 26.7 on pci0 ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xfe9d9c00 ioapic0: routing intpin 22 (PCI IRQ 22) to vector 53 ehci0: [GIANT-LOCKED] ehci0: [ITHREAD] usb2: EHCI version 1.0 usb2: wrong number of companions (3 !=3D 2) usb2: companion controllers, 2 ports each: usb0 usb1 usb2: on ehci0 usb2: USB revision 2.0 uhub2: on usb2 uhub2: 6 ports with 6 removable, self powered pcm0: mem 0xfe9dc000-0xfe9d= ffff irq 16 at device 27.0 on pci0 pcm0: TCSEL: 0x07 -> 0x00 pcm0: DMA Coherency: Uncacheable / vendor=3D0x8086 pcm0: Reserved 0x4000 bytes for rid 0x10 type 3 at 0xfe9dc000 pcm0: [MPSAFE] pcm0: [ITHREAD] pcm0: hdac_dma_alloc: size=3D1024 -> roundsz=3D1024 pcm0: hdac_dma_alloc: size=3D2048 -> roundsz=3D2048 pcib1: irq 16 at device 28.0 on pci0 pcib1: domain 0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xf000-0xfff pcib1: memory decode 0xfe800000-0xfe8fffff pcib1: no prefetched decode pci1: on pcib1 pci1: domain=3D0, physical bus=3D1 uhci2: port 0xff80-0xff9f irq 23 at device = 29.0 on pci0 uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0xff80 ioapic0: routing intpin 23 (PCI IRQ 23) to vector 54 uhci2: [GIANT-LOCKED] uhci2: [ITHREAD] usb3: on uhci2 usb3: USB revision 1.0 uhub3: on usb3 uhub3: 2 ports with 2 removable, self powered uhci3: port 0xff60-0xff7f irq 17 at device = 29.1 on pci0 uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0xff60 uhci3: [GIANT-LOCKED] uhci3: [ITHREAD] usb4: on uhci3 usb4: USB revision 1.0 uhub4: on usb4 uhub4: 2 ports with 2 removable, self powered uhci4: port 0xff40-0xff5f irq 18 at device = 29.2 on pci0 uhci4: Reserved 0x20 bytes for rid 0x20 type 4 at 0xff40 uhci4: [GIANT-LOCKED] uhci4: [ITHREAD] usb5: on uhci4 usb5: USB revision 1.0 uhub5: on usb5 uhub5: 2 ports with 2 removable, self powered ehci1: mem 0xff980800-0xff980bff irq 23= at device 29.7 on pci0 ehci1: Reserved 0x400 bytes for rid 0x10 type 3 at 0xff980800 ehci1: [GIANT-LOCKED] ehci1: [ITHREAD] usb6: EHCI version 1.0 usb6: companion controllers, 2 ports each: usb3 usb4 usb5 usb6: on ehci1 usb6: USB revision 2.0 uhub6: on usb6 uhub6: 6 ports with 6 removable, self powered pcib2: at device 30.0 on pci0 pcib2: domain 0 pcib2: secondary bus 2 pcib2: subordinate bus 2 pcib2: I/O decode 0xf000-0xfff pcib2: no prefetched decode pcib2: Subtractively decoded bridge. pci2: on pcib2 pci2: domain=3D0, physical bus=3D2 isab0: at device 31.0 on pci0 isa0: on isab0 atapci1: port 0xfe00-0xfe07,0xfe10-= 0xfe13,0xfe20-0xfe27,0xfe30-0xfe33,0xfec0-0xfedf mem 0xff970000-0xff9707ff = irq 18 at device 31.2 on pci0 atapci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xfec0 atapci1: Reserved 0x800 bytes for rid 0x24 type 3 at 0xff970000 atapci1: [MPSAFE] atapci1: [ITHREAD] atapci1: AHCI Version 01.20 controller with 6 ports detected ata4: on atapci1 ata4: SATA connect time=3D0ms ata4: SIGNATURE: 00000101 ata4: ahci_reset devices=3D0x1 ata4: [MPSAFE] ata4: [ITHREAD] ata5: on atapci1 ata5: SATA connect time=3D0ms ata5: SIGNATURE: eb140101 ata5: ahci_reset devices=3D0x4 ata5: [MPSAFE] ata5: [ITHREAD] ata6: on atapci1 ata6: SATA connect status=3D00000004 ata6: ahci_reset devices=3D0x0 ata6: [MPSAFE] ata6: [ITHREAD] ata7: on atapci1 ata7: SATA connect status=3D00000004 ata7: ahci_reset devices=3D0x0 ata7: [MPSAFE] ata7: [ITHREAD] ata8: on atapci1 ata8: port not implemented ata8: [MPSAFE] ata8: [ITHREAD] ata9: on atapci1 ata9: SATA connect status=3D00000004 ata9: ahci_reset devices=3D0x0 ata9: [MPSAFE] ata9: [ITHREAD] ichsmb0: port 0xece0-0xecff mem 0xfe9d9b00-0xfe9d9bff ir= q 18 at device 31.3 on pci0 ichsmb0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xece0 ichsmb0: [GIANT-LOCKED] ichsmb0: [ITHREAD] smbus0: on ichsmb0 smb0: on smbus0 fdc0: port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on= acpi0 fdc0: ic_type 90 part_id 80 ioapic0: routing intpin 6 (ISA IRQ 6) to vector 55 fdc0: [FILTER] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 sio0: irq maps: 0xc29 0xc39 0xc29 0xc29 sio0: irq maps: 0xc29 0xc39 0xc29 0xc29 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acp= i0 sio0: type 16550A, console ioapic0: routing intpin 4 (ISA IRQ 4) to vector 56 sio0: [FILTER] fdc: fdc0 already exists; skipping it sio: sio0 already exists; skipping it pnp_identify: Trying Read_Port at 203 pnp_identify: Trying Read_Port at 243 pnp_identify: Trying Read_Port at 283 pnp_identify: Trying Read_Port at 2c3 pnp_identify: Trying Read_Port at 303 pnp_identify: Trying Read_Port at 343 pnp_identify: Trying Read_Port at 383 pnp_identify: Trying Read_Port at 3c3 PNP Identify complete unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff ex_isa_identify() ahc_isa_probe 0: ioport 0xc00 alloc failed ahc_isa_probe 14: ioport 0xec00 alloc failed sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices pmtimer0 on isa0 orm0: at iomem 0xc0000-0xcb7ff,0xcb800-0xcd7ff,0xcd800-0x= cffff pnpid ORM0000 on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0 ata0: reset tp1 mask=3D00 ostat0=3Dff ostat1=3Dff ioapic0: routing intpin 14 (ISA IRQ 14) to vector 57 ata0: [MPSAFE] ata0: [ITHREAD] ata1 at port 0x170-0x177,0x376 irq 15 on isa0 ata1: reset tp1 mask=3D00 ostat0=3Dff ostat1=3Dff ioapic0: routing intpin 15 (ISA IRQ 15) to vector 58 ata1: [MPSAFE] ata1: [ITHREAD] atkbdc0: at port 0x60,0x64 on isa0 atkbd0: irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0065 atkbd: keyboard ID 0xffffffff (1) kbdc: RESET_KBD return code:00fe kbdc: RESET_KBD return code:00fe kbdc: RESET_KBD return code:00fe kbdc: DIAGNOSE status:0055 kbdc: TEST_KBD_PORT status:0000 atkbd: failed to reset the keyboard. kbd0 at atkbd0 kbd0: atkbd0, AT 84 (1), config:0x0, flags:0x3d0000 ioapic0: routing intpin 1 (ISA IRQ 1) to vector 59 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: current command byte:0065 kbdc: TEST_AUX_PORT status:0000 kbdc: RESET_AUX return code:00fe kbdc: RESET_AUX return code:00fe kbdc: RESET_AUX return code:00fe kbdc: DIAGNOSE status:0055 kbdc: TEST_KBD_PORT status:0000 psm0: failed to reset the aux device. bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fe0: not probed (disabled) ie0: not probed (disabled) le0: not probed (disabled) ppc0: parallel port found at 0x378 ppc0: using extended I/O port range ppc0: ECP SPP ECP+EPP SPP ppc0: at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold ppbus0: on ppc0 ioapic0: routing intpin 7 (ISA IRQ 7) to vector 60 ppbus0: [MPSAFE] ppbus0: [ITHREAD] plip0: on ppbus0 plip0: bpf attached lpt0: on ppbus0 lpt0: Interrupt-driven port ppi0: on ppbus0 ppc0: [GIANT-LOCKED] ppc0: [ITHREAD] sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=3D0x300> sc0: fb0, kbd1, terminal emulator: sc (syscons terminal) sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: irq maps: 0xca9 0xca9 0xca9 0xca9 sio1: probe failed test(s): 0 1 2 4 6 7 9 sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0 sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 isa_probe_children: probing PnP devices ums0: on uhub4 ums0: 3 buttons and Z dir. ukbd0: on uhub4 kbd2 at ukbd0 kbd2: ukbd0, generic (0), config:0x0, flags:0x3d0000 Device configuration finished. Reducing kern.maxvnodes 131531 -> 100000 procfs registered lapic: Divisor 2, Frequency 99749928 hz Timecounter "TSC" frequency 1994998380 Hz quality -100 Timecounters tick every 1.000 msec lo0: bpf attached hptrr: no controller detected. ata4-master: pio=3DPIO4 wdma=3DWDMA2 udma=3DUDMA133 cable=3D40 wire ad8: 76293MB at ata4-master SATA300 ad8: 156250000 sectors [155009C/16H/63S] 16 sectors/interrupt 1 depth queue ad8: Intel check1 failed ad8: Adaptec check1 failed ad8: LSI (v3) check1 failed ad8: LSI (v2) check1 failed ad8: FreeBSD check1 failed ata5-master: pio=3DPIO4 wdma=3DWDMA2 udma=3DUDMA33 cable=3D40 wire ata5: device_reset timeout=3D480us acd0: CDRW drive at ata5 as master acd0: read 4134KB/s (4134KB/s) write 4134KB/s (4134KB/s), 2048KB buffer, UD= MA33 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet acd0: Writes: CDR, CDRW, test write, burnproof acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc pcm0: HDA_DEBUG: HDA Config: on=3D0x00000000 off=3D0x00000000 pcm0: HDA_DEBUG: Starting CORB Engine... pcm0: HDA_DEBUG: Starting RIRB Engine... pcm0: HDA_DEBUG: Enabling controller interrupt... pcm0: HDA_DEBUG: Scanning HDA codecs [start index=3D0] ... pcm0: HDA_DEBUG: Probing codec: 0 pcm0: HDA_DEBUG: startnode=3D1 endnode=3D2 pcm0: HDA_DEBUG: Found AFG nid=3D1 [startnode=3D1 endnode=3D2] pcm0: HDA_DEBUG: Parsing AFG nid=3D1 cad=3D0 pcm0: Vendor: 0x000011d4 pcm0: Device: 0x00001984 pcm0: Revision: 0x00000004 pcm0: Stepping: 0x00000000 pcm0: PCI Subvendor: 0x02111028 pcm0: Nodes: start=3D2 endnode=3D39 total=3D37 pcm0: CORB size: 256 pcm0: RIRB size: 256 pcm0: Streams: ISS=3D4 OSS=3D4 BSS=3D0 pcm0: GPIO: 0x40000003 pcm0: NumGPIO=3D3 NumGPO=3D0 NumGPI=3D0 GPIWake=3D0 GPIUnsol= =3D1 pcm0: hdac_widget_connection_parse: GHOST: nid=3D2 j=3D0 entnum=3D4 index= =3D0 res=3D0x00090801 pcm0: HDA_DEBUG: hdac_widget_connection_parse: nid=3D2 entries=3D3 found=3D3 pcm0: HDA_DEBUG: hdac_widget_connection_parse: nid=3D5 entries=3D1 found=3D1 pcm0: HDA_DEBUG: hdac_widget_connection_parse: nid=3D6 entries=3D1 found=3D1 pcm0: HDA_DEBUG: hdac_widget_connection_parse: nid=3D7 entries=3D2 found=3D2 pcm0: HDA_DEBUG: hdac_widget_connection_parse: nid=3D8 entries=3D1 found=3D1 pcm0: HDA_DEBUG: hdac_widget_connection_parse: nid=3D9 entries=3D1 found=3D1 pcm0: HDA_DEBUG: hdac_widget_connection_parse: nid=3D10 entries=3D2 found= =3D2 pcm0: HDA_DEBUG: hdac_widget_connection_parse: nid=3D11 entries=3D2 found= =3D2 pcm0: HDA_DEBUG: hdac_widget_connection_parse: nid=3D12 entries=3D4 found= =3D5 pcm0: HDA_DEBUG: hdac_widget_connection_parse: nid=3D13 entries=3D4 found= =3D5 pcm0: HDA_DEBUG: hdac_widget_connection_parse: nid=3D14 entries=3D2 found= =3D2 pcm0: HDA_DEBUG: hdac_widget_connection_parse: nid=3D15 entries=3D2 found= =3D2 pcm0: HDA_DEBUG: hdac_widget_connection_parse: nid=3D17 entries=3D1 found= =3D1 pcm0: HDA_DEBUG: hdac_widget_connection_parse: nid=3D18 entries=3D1 found= =3D1 pcm0: HDA_DEBUG: hdac_widget_connection_parse: nid=3D19 entries=3D1 found= =3D1 pcm0: HDA_DEBUG: hdac_widget_connection_parse: nid=3D22 entries=3D1 found= =3D1 pcm0: HDA_DEBUG: hdac_widget_connection_parse: nid=3D25 entries=3D2 found= =3D2 pcm0: HDA_DEBUG: hdac_widget_connection_parse: nid=3D27 entries=3D1 found= =3D1 pcm0: HDA_DEBUG: hdac_widget_connection_parse: nid=3D28 entries=3D1 found= =3D1 pcm0: HDA_DEBUG: hdac_widget_connection_parse: nid=3D29 entries=3D10 found= =3D25 pcm0: HDA_DEBUG: hdac_widget_connection_parse: nid=3D30 entries=3D2 found= =3D2 pcm0: HDA_DEBUG: hdac_widget_connection_parse: nid=3D31 entries=3D1 found= =3D1 pcm0: HDA_DEBUG: hdac_widget_connection_parse: nid=3D32 entries=3D4 found= =3D5 pcm0: HDA_DEBUG: hdac_widget_connection_parse: nid=3D33 entries=3D1 found= =3D1 pcm0: HDA_DEBUG: hdac_widget_connection_parse: nid=3D34 entries=3D2 found= =3D2 pcm0: HDA_DEBUG: hdac_widget_connection_parse: nid=3D35 entries=3D2 found= =3D2 pcm0: HDA_DEBUG: hdac_widget_connection_parse: nid=3D36 entries=3D2 found= =3D2 pcm0: HDA_DEBUG: hdac_widget_connection_parse: nid=3D37 entries=3D1 found= =3D1 pcm0: HDA_DEBUG: hdac_widget_connection_parse: nid=3D38 entries=3D3 found= =3D3 pcm0: HDA_DEBUG: Parsing Ctls... pcm0: HDA_DEBUG: Parsing vendor patch... pcm0: HDA_DEBUG: Building AFG tree... pcm0: HDA_DEBUG: HWiP: HDA Widget Parser - Revision 1 pcm0: HDA_DEBUG: HWiP: Found 3 DAC path using HDA_PARSE_MIXER strategy. pcm0: HDA_DEBUG: AFG commit... pcm0: HDA_DEBUG: Ctls commit... pcm0: [ 3] Ctl nid=3D5 Bind to NONE pcm0: [ 4] Ctl nid=3D6 Bind to NONE pcm0: [ 5] Ctl nid=3D7 childnid=3D34 Bind to NONE pcm0: [ 6] Ctl nid=3D7 childnid=3D33 Bind to NONE pcm0: [ 8] Ctl nid=3D10 childnid=3D33 Bind to NONE pcm0: [ 9] Ctl nid=3D11 childnid=3D15 Bind to NONE pcm0: [10] Ctl nid=3D11 childnid=3D33 Bind to NONE pcm0: [14] Ctl nid=3D17 Bind to NONE pcm0: [15] Ctl nid=3D18 Bind to NONE pcm0: [16] Ctl nid=3D19 Bind to NONE pcm0: [17] Ctl nid=3D20 Bind to NONE pcm0: [18] Ctl nid=3D21 Bind to NONE pcm0: [19] Ctl nid=3D22 DISABLED pcm0: [20] Ctl nid=3D27 DISABLED pcm0: [21] Ctl nid=3D28 DISABLED pcm0: [22] Ctl nid=3D30 childnid=3D14 Bind to NONE pcm0: [23] Ctl nid=3D30 childnid=3D33 Bind to NONE pcm0: [26] Ctl nid=3D32 childnid=3D22 DISABLED pcm0: [27] Ctl nid=3D32 childnid=3D26 DISABLED pcm0: [28] Ctl nid=3D32 childnid=3D37 Bind to NONE pcm0: [29] Ctl nid=3D33 Bind to NONE pcm0: [30] Ctl nid=3D36 childnid=3D35 Bind to NONE pcm0: [31] Ctl nid=3D36 childnid=3D33 Bind to NONE pcm0: [32] Ctl nid=3D37 Bind to NONE pcm0: HDA_DEBUG: PCMDIR_PLAY setup... pcm0: HDA_DEBUG: PCMDIR_REC setup... pcm0: HDA_DEBUG: OSS mixer initialization... pcm0: Mixer "vol": pcm0: Mixer "pcm": pcm0: Mixer "speaker": pcm0: Mixer "line": pcm0: Mixer "mic": pcm0: Mixer "rec": pcm0: HDA_DEBUG: Registering PCM channels... pcm0: clone manager: deadline=3D750ms flags=3D0x8000001e pcm0: hdac_dma_alloc: size=3D4096 -> roundsz=3D4096 pcm0: sndbuf_setmap 172c000, 4000; 0xe5748000 -> 172c000 pcm0: hdac_dma_alloc: size=3D4096 -> roundsz=3D4096 pcm0: sndbuf_setmap 1734000, 4000; 0xe574c000 -> 1734000 pcm0: pcm0: pcm0: pcm0:=20 pcm0: HDA config/quirks: forcestereo ivref50 ivref80 ivref100 ivref pcm0:=20 pcm0: +-------------------+ pcm0: | DUMPING HDA NODES | pcm0: +-------------------+ pcm0:=20 pcm0: Default Parameter pcm0: ----------------- pcm0: Stream cap: 0x00000001 pcm0: Format: PCM pcm0: PCM cap: 0x000e07ff pcm0: PCM size: 16 20 24 pcm0: PCM rate: 8 11 16 22 32 44 48 88 96 176 192 pcm0: IN amp: 0x80000000 pcm0: OUT amp: 0x00052727 pcm0:=20 pcm0: nid: 2 [DIGITAL] [DISABLED] pcm0: name: audio output pcm0: widget_cap: 0x00030311 pcm0: Parse flags: 0x00000000 pcm0: Ctl flags: 0x00000000 pcm0: Stream cap: 0x00000005 pcm0: Format: AC3 PCM pcm0: PCM cap: 0x000e07e0 pcm0: PCM size: 16 20 24 pcm0: PCM rate: 44 48 88 96 176 192 pcm0: connections: 3 pcm0: | pcm0: + <- nid=3D1 [GHOST!] [UNKNOWN] pcm0: | pcm0: + <- nid=3D8 [audio input] pcm0: | pcm0: + <- nid=3D9 [audio input] pcm0:=20 pcm0: nid: 3 [ANALOG] pcm0: name: audio output pcm0: widget_cap: 0x00000405 pcm0: Parse flags: 0x00000001 pcm0: Ctl flags: 0x00000011 pcm0: Stream cap: 0x00000001 pcm0: Format: PCM pcm0: PCM cap: 0x000e07ff pcm0: PCM size: 16 20 24 pcm0: PCM rate: 8 11 16 22 32 44 48 88 96 176 192 pcm0: Output amp: 0x00052727 pcm0: mute=3D0 step=3D39 size=3D5 offset=3D39 pcm0: connections: 0 pcm0:=20 pcm0: nid: 4 [ANALOG] pcm0: name: audio output pcm0: widget_cap: 0x00000405 pcm0: Parse flags: 0x00000001 pcm0: Ctl flags: 0x00000011 pcm0: Stream cap: 0x00000001 pcm0: Format: PCM pcm0: PCM cap: 0x000e07ff pcm0: PCM size: 16 20 24 pcm0: PCM rate: 8 11 16 22 32 44 48 88 96 176 192 pcm0: Output amp: 0x00052727 pcm0: mute=3D0 step=3D39 size=3D5 offset=3D39 pcm0: connections: 0 pcm0:=20 pcm0: nid: 5 [ANALOG] pcm0: name: audio input pcm0: widget_cap: 0x0010050b pcm0: Parse flags: 0x00000000 pcm0: Ctl flags: 0x00000000 pcm0: Stream cap: 0x00000001 pcm0: Format: PCM pcm0: PCM cap: 0x000e07ff pcm0: PCM size: 16 20 24 pcm0: PCM rate: 8 11 16 22 32 44 48 88 96 176 192 pcm0: Input amp: 0x80053627 pcm0: mute=3D1 step=3D54 size=3D5 offset=3D39 pcm0: connections: 1 pcm0: | pcm0: + <- nid=3D23 [pin: Mic in (none)] [DISABLED] pcm0:=20 pcm0: nid: 6 [ANALOG] pcm0: name: audio input pcm0: widget_cap: 0x0010050b pcm0: Parse flags: 0x00000000 pcm0: Ctl flags: 0x00000000 pcm0: Stream cap: 0x00000001 pcm0: Format: PCM pcm0: PCM cap: 0x000e07ff pcm0: PCM size: 16 20 24 pcm0: PCM rate: 8 11 16 22 32 44 48 88 96 176 192 pcm0: Input amp: 0x80053627 pcm0: mute=3D1 step=3D54 size=3D5 offset=3D39 pcm0: connections: 1 pcm0: | pcm0: + <- nid=3D24 [pin: Mic in (none)] [DISABLED] pcm0:=20 pcm0: nid: 7 [ANALOG] pcm0: name: audio mixer pcm0: widget_cap: 0x00200103 pcm0: Parse flags: 0x00000001 pcm0: Ctl flags: 0x000000d1 pcm0: Input amp: 0x80000000 pcm0: mute=3D1 step=3D0 size=3D0 offset=3D0 pcm0: connections: 2 pcm0: | pcm0: + <- nid=3D34 [audio selector] pcm0: | pcm0: + <- nid=3D33 [audio selector] pcm0:=20 pcm0: nid: 8 [ANALOG] pcm0: name: audio input pcm0: widget_cap: 0x00100501 pcm0: Parse flags: 0x00000002 pcm0: Ctl flags: 0x00000800 pcm0: Stream cap: 0x00000001 pcm0: Format: PCM pcm0: PCM cap: 0x000e07ff pcm0: PCM size: 16 20 24 pcm0: PCM rate: 8 11 16 22 32 44 48 88 96 176 192 pcm0: connections: 1 pcm0: | pcm0: + <- nid=3D12 [audio selector] pcm0:=20 pcm0: nid: 9 [ANALOG] pcm0: name: audio input pcm0: widget_cap: 0x00100501 pcm0: Parse flags: 0x00000002 pcm0: Ctl flags: 0x00000800 pcm0: Stream cap: 0x00000001 pcm0: Format: PCM pcm0: PCM cap: 0x000e07ff pcm0: PCM size: 16 20 24 pcm0: PCM rate: 8 11 16 22 32 44 48 88 96 176 192 pcm0: connections: 1 pcm0: | pcm0: + <- nid=3D13 [audio selector] pcm0:=20 pcm0: nid: 10 [ANALOG] pcm0: name: audio mixer pcm0: widget_cap: 0x00200103 pcm0: Parse flags: 0x00000001 pcm0: Ctl flags: 0x00000011 pcm0: Input amp: 0x80000000 pcm0: mute=3D1 step=3D0 size=3D0 offset=3D0 pcm0: connections: 2 pcm0: | pcm0: + <- nid=3D4 [audio output] pcm0: | pcm0: + <- nid=3D33 [audio selector] pcm0:=20 pcm0: nid: 11 [ANALOG] pcm0: name: audio mixer pcm0: widget_cap: 0x00200103 pcm0: Parse flags: 0x00000000 pcm0: Ctl flags: 0x00000000 pcm0: Input amp: 0x80000000 pcm0: mute=3D1 step=3D0 size=3D0 offset=3D0 pcm0: connections: 2 pcm0: | pcm0: + <- nid=3D15 [audio selector] pcm0: | pcm0: + <- nid=3D33 [audio selector] pcm0:=20 pcm0: nid: 12 [ANALOG] pcm0: name: audio selector pcm0: widget_cap: 0x0030010d pcm0: Parse flags: 0x00000006 pcm0: Ctl flags: 0x00000800 pcm0: Output amp: 0x80053627 pcm0: mute=3D1 step=3D54 size=3D5 offset=3D39 pcm0: connections: 5 pcm0: | pcm0: + <- nid=3D20 [pin: Mic in (jack)] (selected) pcm0: | pcm0: + <- nid=3D21 [pin: line in (jack)] pcm0: | pcm0: + <- nid=3D22 [pin: CD (none)] [DISABLED] pcm0: | pcm0: + <- nid=3D32 [audio mixer] pcm0: | pcm0: + <- nid=3D37 [audio selector] pcm0:=20 pcm0: nid: 13 [ANALOG] pcm0: name: audio selector pcm0: widget_cap: 0x0030010d pcm0: Parse flags: 0x00000006 pcm0: Ctl flags: 0x00000800 pcm0: Output amp: 0x80053627 pcm0: mute=3D1 step=3D54 size=3D5 offset=3D39 pcm0: connections: 5 pcm0: | pcm0: + <- nid=3D20 [pin: Mic in (jack)] (selected) pcm0: | pcm0: + <- nid=3D21 [pin: line in (jack)] pcm0: | pcm0: + <- nid=3D22 [pin: CD (none)] [DISABLED] pcm0: | pcm0: + <- nid=3D32 [audio mixer] pcm0: | pcm0: + <- nid=3D37 [audio selector] pcm0:=20 pcm0: nid: 14 [ANALOG] pcm0: name: audio selector pcm0: widget_cap: 0x00300101 pcm0: Parse flags: 0x00000001 pcm0: Ctl flags: 0x00000000 pcm0: connections: 2 pcm0: | pcm0: + <- nid=3D3 [audio output] (selected) pcm0: | pcm0: + <- nid=3D4 [audio output] pcm0:=20 pcm0: nid: 15 [ANALOG] pcm0: name: audio selector pcm0: widget_cap: 0x00300101 pcm0: Parse flags: 0x00000000 pcm0: Ctl flags: 0x00000000 pcm0: connections: 2 pcm0: | pcm0: + <- nid=3D3 [audio output] (selected) pcm0: | pcm0: + <- nid=3D4 [audio output] pcm0:=20 pcm0: nid: 16 [ANALOG] pcm0: name: beep widget pcm0: widget_cap: 0x0070000c pcm0: Parse flags: 0x00000000 pcm0: Ctl flags: 0x00000021 pcm0: Output amp: 0x800b0f0f pcm0: mute=3D1 step=3D15 size=3D11 offset=3D15 pcm0: connections: 0 pcm0:=20 pcm0: nid: 17 [ANALOG] pcm0: name: pin: headphones out (jack) pcm0: widget_cap: 0x0040018d pcm0: Parse flags: 0x00000001 pcm0: Ctl flags: 0x00000000 pcm0: Pin cap: 0x0000001f pcm0: ISC TRQD HP OUT : UNSOL pcm0: Pin config: 0x02214040 pcm0: Pin control: 0x000000c0 HP OUT pcm0: Output amp: 0x80000000 pcm0: mute=3D1 step=3D0 size=3D0 offset=3D0 pcm0: connections: 1 pcm0: | pcm0: + <- nid=3D7 [audio mixer] pcm0:=20 pcm0: nid: 18 [ANALOG] pcm0: name: pin: line out (jack) pcm0: widget_cap: 0x0040058d pcm0: Parse flags: 0x00000001 pcm0: Ctl flags: 0x00000000 pcm0: Pin cap: 0x0001001f pcm0: ISC TRQD HP OUT EAPD : UNSOL pcm0: Pin config: 0x01014010 pcm0: Pin control: 0x00000040 OUT pcm0: EAPD: 0x00000002 pcm0: Output amp: 0x80000000 pcm0: mute=3D1 step=3D0 size=3D0 offset=3D0 pcm0: connections: 1 pcm0: | pcm0: + <- nid=3D10 [audio mixer] pcm0:=20 pcm0: nid: 19 [ANALOG] pcm0: name: pin: speaker (fixed) pcm0: widget_cap: 0x0040050c pcm0: Parse flags: 0x00000001 pcm0: Ctl flags: 0x00000000 pcm0: Pin cap: 0x00010010 pcm0: OUT EAPD pcm0: Pin config: 0x991301f0 pcm0: Pin control: 0x00000040 OUT pcm0: EAPD: 0x00000002 pcm0: Output amp: 0x80051f1f pcm0: mute=3D1 step=3D31 size=3D5 offset=3D31 pcm0: connections: 1 pcm0: | pcm0: + <- nid=3D31 [audio mixer] pcm0:=20 pcm0: nid: 20 [ANALOG] pcm0: name: pin: Mic in (jack) pcm0: widget_cap: 0x0040008b pcm0: Parse flags: 0x00000002 pcm0: Ctl flags: 0x00000081 pcm0: Pin cap: 0x00003727 pcm0: ISC TRQD IN VREF[ 50 80 100 GROUND HIZ ] : UNSOL pcm0: Pin config: 0x02a19020 pcm0: Pin control: 0x00000025 IN pcm0: Input amp: 0x00270300 pcm0: mute=3D0 step=3D3 size=3D39 offset=3D0 pcm0: connections: 0 pcm0:=20 pcm0: nid: 21 [ANALOG] pcm0: name: pin: line in (jack) pcm0: widget_cap: 0x0040008b pcm0: Parse flags: 0x00000002 pcm0: Ctl flags: 0x00000041 pcm0: Pin cap: 0x00003727 pcm0: ISC TRQD IN VREF[ 50 80 100 GROUND HIZ ] : UNSOL pcm0: Pin config: 0x01813030 pcm0: Pin control: 0x00000025 IN pcm0: Input amp: 0x00270300 pcm0: mute=3D0 step=3D3 size=3D39 offset=3D0 pcm0: connections: 0 pcm0:=20 pcm0: nid: 22 [ANALOG] [DISABLED] pcm0: name: pin: CD (none) pcm0: widget_cap: 0x0040018d pcm0: Parse flags: 0x00000000 pcm0: Ctl flags: 0x00000000 pcm0: Pin cap: 0x00000037 pcm0: ISC TRQD OUT IN : UNSOL pcm0: Pin config: 0x413301f0 pcm0: Pin control: 0x00000060 IN OUT pcm0: Output amp: 0x80000000 pcm0: mute=3D1 step=3D0 size=3D0 offset=3D0 pcm0: connections: 1 pcm0: | pcm0: + <- nid=3D11 [audio mixer] pcm0:=20 pcm0: nid: 23 [ANALOG] [DISABLED] pcm0: name: pin: Mic in (none) pcm0: widget_cap: 0x00400001 pcm0: Parse flags: 0x00000000 pcm0: Ctl flags: 0x00000000 pcm0: Pin cap: 0x00000020 pcm0: IN pcm0: Pin config: 0x41a601f0 pcm0: Pin control: 0x00000020 IN pcm0: connections: 0 pcm0:=20 pcm0: nid: 24 [ANALOG] [DISABLED] pcm0: name: pin: Mic in (none) pcm0: widget_cap: 0x00400001 pcm0: Parse flags: 0x00000000 pcm0: Ctl flags: 0x00000000 pcm0: Pin cap: 0x00000020 pcm0: IN pcm0: Pin config: 0x41a601f0 pcm0: Pin control: 0x00000020 IN pcm0: connections: 0 pcm0:=20 pcm0: nid: 25 [ANALOG] pcm0: name: power widget pcm0: widget_cap: 0x00500500 pcm0: Parse flags: 0x00000000 pcm0: Ctl flags: 0x00000000 pcm0: connections: 2 pcm0: | pcm0: + <- nid=3D32 [audio mixer] (selected) pcm0: | pcm0: + <- nid=3D33 [audio selector] pcm0:=20 pcm0: nid: 26 [ANALOG] [DISABLED] pcm0: name: pin: other (none) pcm0: widget_cap: 0x00400000 pcm0: Parse flags: 0x00000000 pcm0: Ctl flags: 0x00000000 pcm0: Pin cap: 0x00000020 pcm0: IN pcm0: Pin config: 0x41f301f0 pcm0: Pin control: 0x00000020 IN pcm0: connections: 0 pcm0:=20 pcm0: nid: 27 [DIGITAL] [DISABLED] pcm0: name: pin: SPDIF out (none) pcm0: widget_cap: 0x0040030d pcm0: Parse flags: 0x00000000 pcm0: Ctl flags: 0x00000000 pcm0: Pin cap: 0x00000010 pcm0: OUT pcm0: Pin config: 0x414511f0 pcm0: Pin control: 0x00000040 OUT pcm0: Output amp: 0x80052727 pcm0: mute=3D1 step=3D39 size=3D5 offset=3D39 pcm0: connections: 1 pcm0: | pcm0: + <- nid=3D2 [audio output] [DISABLED] pcm0:=20 pcm0: nid: 28 [ANALOG] [DISABLED] pcm0: name: pin: Mic in (none) pcm0: widget_cap: 0x0040018d pcm0: Parse flags: 0x00000000 pcm0: Ctl flags: 0x00000000 pcm0: Pin cap: 0x00003737 pcm0: ISC TRQD OUT IN VREF[ 50 80 100 GROUND HIZ ] : UNSOL pcm0: Pin config: 0x41a190f0 pcm0: Pin control: 0x00000060 IN OUT pcm0: Output amp: 0x80000000 pcm0: mute=3D1 step=3D0 size=3D0 offset=3D0 pcm0: connections: 1 pcm0: | pcm0: + <- nid=3D36 [audio mixer] pcm0:=20 pcm0: nid: 29 [ANALOG] pcm0: name: vendor widget pcm0: widget_cap: 0x00f00100 pcm0: Parse flags: 0x00000000 pcm0: Ctl flags: 0x00000000 pcm0: connections: 25 pcm0: | pcm0: + <- nid=3D7 [audio mixer] (selected) pcm0: | pcm0: + <- nid=3D25 [power widget] pcm0: | pcm0: + <- nid=3D10 [audio mixer] pcm0: | pcm0: + <- nid=3D11 [audio mixer] pcm0: | pcm0: + <- nid=3D12 [audio selector] pcm0: | pcm0: + <- nid=3D13 [audio selector] pcm0: | pcm0: + <- nid=3D14 [audio selector] pcm0: | pcm0: + <- nid=3D15 [audio selector] pcm0: | pcm0: + <- nid=3D26 [pin: other (none)] [DISABLED] pcm0: | pcm0: + <- nid=3D28 [pin: Mic in (none)] [DISABLED] pcm0: | pcm0: + <- nid=3D17 [pin: headphones out (jack)] pcm0: | pcm0: + <- nid=3D18 [pin: line out (jack)] pcm0: | pcm0: + <- nid=3D19 [pin: speaker (fixed)] pcm0: | pcm0: + <- nid=3D20 [pin: Mic in (jack)] pcm0: | pcm0: + <- nid=3D21 [pin: line in (jack)] pcm0: | pcm0: + <- nid=3D22 [pin: CD (none)] [DISABLED] pcm0: | pcm0: + <- nid=3D30 [audio mixer] pcm0: | pcm0: + <- nid=3D31 [audio mixer] pcm0: | pcm0: + <- nid=3D32 [audio mixer] pcm0: | pcm0: + <- nid=3D33 [audio selector] pcm0: | pcm0: + <- nid=3D34 [audio selector] pcm0: | pcm0: + <- nid=3D35 [audio selector] pcm0: | pcm0: + <- nid=3D36 [audio mixer] pcm0: | pcm0: + <- nid=3D37 [audio selector] pcm0: | pcm0: + <- nid=3D38 [vendor widget] pcm0:=20 pcm0: nid: 30 [ANALOG] pcm0: name: audio mixer pcm0: widget_cap: 0x00200103 pcm0: Parse flags: 0x00000001 pcm0: Ctl flags: 0x00000000 pcm0: Input amp: 0x80000000 pcm0: mute=3D1 step=3D0 size=3D0 offset=3D0 pcm0: connections: 2 pcm0: | pcm0: + <- nid=3D14 [audio selector] pcm0: | pcm0: + <- nid=3D33 [audio selector] pcm0:=20 pcm0: nid: 31 [ANALOG] pcm0: name: audio mixer pcm0: widget_cap: 0x00200100 pcm0: Parse flags: 0x00000001 pcm0: Ctl flags: 0x00000000 pcm0: connections: 1 pcm0: | pcm0: + <- nid=3D30 [audio mixer] pcm0:=20 pcm0: nid: 32 [ANALOG] pcm0: name: audio mixer pcm0: widget_cap: 0x0020010b pcm0: Parse flags: 0x00000002 pcm0: Ctl flags: 0x000000c1 pcm0: Input amp: 0x80051f17 pcm0: mute=3D1 step=3D31 size=3D5 offset=3D23 pcm0: connections: 5 pcm0: | pcm0: + <- nid=3D20 [pin: Mic in (jack)] pcm0: | pcm0: + <- nid=3D21 [pin: line in (jack)] pcm0: | pcm0: + <- nid=3D22 [pin: CD (none)] [DISABLED] pcm0: | pcm0: + <- nid=3D26 [pin: other (none)] [DISABLED] pcm0: | pcm0: + <- nid=3D37 [audio selector] pcm0:=20 pcm0: nid: 33 [ANALOG] pcm0: name: audio selector pcm0: widget_cap: 0x0030010d pcm0: Parse flags: 0x00000000 pcm0: Ctl flags: 0x000000c1 pcm0: Output amp: 0x80051f1f pcm0: mute=3D1 step=3D31 size=3D5 offset=3D31 pcm0: connections: 1 pcm0: | pcm0: + <- nid=3D32 [audio mixer] pcm0:=20 pcm0: nid: 34 [ANALOG] pcm0: name: audio selector pcm0: widget_cap: 0x00300101 pcm0: Parse flags: 0x00000001 pcm0: Ctl flags: 0x00000011 pcm0: connections: 2 pcm0: | pcm0: + <- nid=3D3 [audio output] (selected) pcm0: | pcm0: + <- nid=3D4 [audio output] pcm0:=20 pcm0: nid: 35 [ANALOG] pcm0: name: audio selector pcm0: widget_cap: 0x00300101 pcm0: Parse flags: 0x00000000 pcm0: Ctl flags: 0x00000000 pcm0: connections: 2 pcm0: | pcm0: + <- nid=3D3 [audio output] (selected) pcm0: | pcm0: + <- nid=3D4 [audio output] pcm0:=20 pcm0: nid: 36 [ANALOG] pcm0: name: audio mixer pcm0: widget_cap: 0x00200103 pcm0: Parse flags: 0x00000000 pcm0: Ctl flags: 0x00000000 pcm0: Input amp: 0x80000000 pcm0: mute=3D1 step=3D0 size=3D0 offset=3D0 pcm0: connections: 2 pcm0: | pcm0: + <- nid=3D35 [audio selector] pcm0: | pcm0: + <- nid=3D33 [audio selector] pcm0:=20 pcm0: nid: 37 [ANALOG] pcm0: name: audio selector pcm0: widget_cap: 0x0030010d pcm0: Parse flags: 0x00000000 pcm0: Ctl flags: 0x00000000 pcm0: Output amp: 0x00270300 pcm0: mute=3D0 step=3D3 size=3D39 offset=3D0 pcm0: connections: 1 pcm0: | pcm0: + <- nid=3D28 [pin: Mic in (none)] [DISABLED] pcm0:=20 pcm0: nid: 38 [ANALOG] pcm0: name: vendor widget pcm0: widget_cap: 0x00f00100 pcm0: Parse flags: 0x00000000 pcm0: Ctl flags: 0x00000000 pcm0: connections: 3 pcm0: | pcm0: + <- nid=3D20 [pin: Mic in (jack)] (selected) pcm0: | pcm0: + <- nid=3D21 [pin: line in (jack)] pcm0: | pcm0: + <- nid=3D28 [pin: Mic in (none)] [DISABLED] pcm0:=20 pcm0: +------------------------+ pcm0: | DUMPING HDA AMPLIFIERS | pcm0: +------------------------+ pcm0:=20 pcm0: 1: nid=3D3 dir=3D0x1 index=3D0 ossmask=3D0x00000011 ossdev=3D4 pcm0: 2: nid=3D4 dir=3D0x1 index=3D0 ossmask=3D0x00000011 ossdev=3D4 pcm0: 3: nid=3D5 dir=3D0x2 index=3D0 ossmask=3D0x00000000 ossdev=3D0 pcm0: 4: nid=3D6 dir=3D0x2 index=3D0 ossmask=3D0x00000000 ossdev=3D0 pcm0: 5: nid=3D7 cnid=3D34 dir=3D0x2 index=3D0 ossmask=3D0x00000000 ossde= v=3D0 pcm0: 6: nid=3D7 cnid=3D33 dir=3D0x2 index=3D1 ossmask=3D0x00000000 ossde= v=3D0 pcm0: 7: nid=3D10 cnid=3D4 dir=3D0x2 index=3D0 ossmask=3D0x00000011 ossde= v=3D4 pcm0: 8: nid=3D10 cnid=3D33 dir=3D0x2 index=3D1 ossmask=3D0x00000000 ossd= ev=3D0 pcm0: 9: nid=3D11 cnid=3D15 dir=3D0x2 index=3D0 ossmask=3D0x00000000 ossd= ev=3D0 pcm0: 10: nid=3D11 cnid=3D33 dir=3D0x2 index=3D1 ossmask=3D0x00000000 ossd= ev=3D0 pcm0: 11: nid=3D12 dir=3D0x1 index=3D0 ossmask=3D0x00000800 ossdev=3D0 pcm0: 12: nid=3D13 dir=3D0x1 index=3D0 ossmask=3D0x00000800 ossdev=3D0 pcm0: 13: nid=3D16 dir=3D0x1 index=3D0 ossmask=3D0x00000021 ossdev=3D5 pcm0: 14: nid=3D17 dir=3D0x1 index=3D0 ossmask=3D0x00000000 ossdev=3D0 pcm0: 15: nid=3D18 dir=3D0x1 index=3D0 ossmask=3D0x00000000 ossdev=3D0 pcm0: 16: nid=3D19 dir=3D0x1 index=3D0 ossmask=3D0x00000000 ossdev=3D0 pcm0: 17: nid=3D20 dir=3D0x2 index=3D0 ossmask=3D0x00000000 ossdev=3D0 pcm0: 18: nid=3D21 dir=3D0x2 index=3D0 ossmask=3D0x00000000 ossdev=3D0 pcm0: 19: nid=3D22 dir=3D0x1 index=3D0 ossmask=3D0x00000000 ossdev=3D0 [DI= SABLED] pcm0: 20: nid=3D27 dir=3D0x1 index=3D0 ossmask=3D0x00000000 ossdev=3D0 [DI= SABLED] pcm0: 21: nid=3D28 dir=3D0x1 index=3D0 ossmask=3D0x00000000 ossdev=3D0 [DI= SABLED] pcm0: 22: nid=3D30 cnid=3D14 dir=3D0x2 index=3D0 ossmask=3D0x00000000 ossd= ev=3D0 pcm0: 23: nid=3D30 cnid=3D33 dir=3D0x2 index=3D1 ossmask=3D0x00000000 ossd= ev=3D0 pcm0: 24: nid=3D32 cnid=3D20 dir=3D0x2 index=3D0 ossmask=3D0x00000081 ossd= ev=3D7 pcm0: 25: nid=3D32 cnid=3D21 dir=3D0x2 index=3D1 ossmask=3D0x00000041 ossd= ev=3D6 pcm0: 26: nid=3D32 cnid=3D22 dir=3D0x2 index=3D2 ossmask=3D0x00000000 ossd= ev=3D0 [DISABLED] pcm0: 27: nid=3D32 cnid=3D26 dir=3D0x2 index=3D3 ossmask=3D0x00000000 ossd= ev=3D0 [DISABLED] pcm0: 28: nid=3D32 cnid=3D37 dir=3D0x2 index=3D4 ossmask=3D0x00000000 ossd= ev=3D0 pcm0: 29: nid=3D33 dir=3D0x1 index=3D0 ossmask=3D0x00000000 ossdev=3D0 pcm0: 30: nid=3D36 cnid=3D35 dir=3D0x2 index=3D0 ossmask=3D0x00000000 ossd= ev=3D0 pcm0: 31: nid=3D36 cnid=3D33 dir=3D0x2 index=3D1 ossmask=3D0x00000000 ossd= ev=3D0 pcm0: 32: nid=3D37 dir=3D0x1 index=3D0 ossmask=3D0x00000000 ossdev=3D0 pcm0:=20 pcm0: +-----------------------------------+ pcm0: | DUMPING HDA AUDIO/VOLUME CONTROLS | pcm0: +-----------------------------------+ pcm0:=20 pcm0: Master Volume (OSS: vol) pcm0: | pcm0: +- nid: 3 index: 0 mute: 0 step: 39 size: 5 off: = 39 dir=3D0x1 ossmask=3D0x00000011 pcm0: | pcm0: +- nid: 4 index: 0 mute: 0 step: 39 size: 5 off: = 39 dir=3D0x1 ossmask=3D0x00000011 pcm0: | pcm0: +- nid: 10 index: 0 (nid: 4) mute: 1 step: 0 size: 0 off: = 0 dir=3D0x2 ossmask=3D0x00000011 pcm0: | pcm0: +- nid: 16 index: 0 mute: 1 step: 15 size: 11 off: = 15 dir=3D0x1 ossmask=3D0x00000021 pcm0: | pcm0: +- nid: 32 index: 0 (nid: 20) mute: 1 step: 31 size: 5 off: = 23 dir=3D0x2 ossmask=3D0x00000081 pcm0: | pcm0: +- nid: 32 index: 1 (nid: 21) mute: 1 step: 31 size: 5 off: = 23 dir=3D0x2 ossmask=3D0x00000041 pcm0:=20 pcm0: PCM Volume (OSS: pcm) pcm0: | pcm0: +- nid: 3 index: 0 mute: 0 step: 39 size: 5 off: = 39 dir=3D0x1 ossmask=3D0x00000011 pcm0: | pcm0: +- nid: 4 index: 0 mute: 0 step: 39 size: 5 off: = 39 dir=3D0x1 ossmask=3D0x00000011 pcm0: | pcm0: +- nid: 10 index: 0 (nid: 4) mute: 1 step: 0 size: 0 off: = 0 dir=3D0x2 ossmask=3D0x00000011 pcm0:=20 pcm0: Microphone Volume (OSS: mic) pcm0: | pcm0: +- nid: 32 index: 0 (nid: 20) mute: 1 step: 31 size: 5 off: = 23 dir=3D0x2 ossmask=3D0x00000081 pcm0:=20 pcm0: Line-in Volume (OSS: line) pcm0: | pcm0: +- nid: 32 index: 1 (nid: 21) mute: 1 step: 31 size: 5 off: = 23 dir=3D0x2 ossmask=3D0x00000041 pcm0:=20 pcm0: Recording Level (OSS: rec) pcm0: | pcm0: +- nid: 12 index: 0 mute: 1 step: 54 size: 5 off: = 39 dir=3D0x1 ossmask=3D0x00000800 pcm0: | pcm0: +- nid: 13 index: 0 mute: 1 step: 54 size: 5 off: = 39 dir=3D0x1 ossmask=3D0x00000800 pcm0:=20 pcm0: Speaker/Beep (OSS: speaker) pcm0: | pcm0: +- nid: 16 index: 0 mute: 1 step: 15 size: 11 off: = 15 dir=3D0x1 ossmask=3D0x00000021 pcm0:=20 pcm0: Playback path: pcm0:=20 pcm0: nid=3D17 [pin: headphones out (jack)] pcm0: ^ pcm0: | pcm0: +-----<------+ pcm0: ^ pcm0: | pcm0: nid=3D7 [audio mixer] pcm0: ^ pcm0: | pcm0: nid=3D34 [audio selector] pcm0: ^ pcm0: | pcm0: nid=3D3 [audio output] pcm0:=20 pcm0: nid=3D18 [pin: line out (jack)] pcm0: ^ pcm0: | pcm0: +-----<------+ pcm0: ^ pcm0: | pcm0: nid=3D10 [audio mixer] pcm0: ^ pcm0: | pcm0: nid=3D4 [audio output] pcm0:=20 pcm0: nid=3D19 [pin: speaker (fixed)] pcm0: ^ pcm0: | pcm0: +-----<------+ pcm0: ^ pcm0: | pcm0: nid=3D31 [audio mixer] pcm0: ^ pcm0: | pcm0: nid=3D30 [audio mixer] pcm0: ^ pcm0: | pcm0: nid=3D14 [audio selector] pcm0: ^ pcm0: | pcm0: nid=3D3 [audio output] pcm0:=20 pcm0: Recording sources: pcm0:=20 pcm0: nid=3D12 [audio selector] pcm0: | pcm0: + <- nid=3D20 [pin: Mic in (jack)] [recsrc: vol, mic] pcm0: | pcm0: + <- nid=3D21 [pin: line in (jack)] [recsrc: vol, line] pcm0: | pcm0: + <- nid=3D32 [audio mixer] [recsrc: vol, line, mic] pcm0: | pcm0: + <- nid=3D37 [audio selector] pcm0:=20 pcm0: nid=3D13 [audio selector] pcm0: | pcm0: + <- nid=3D20 [pin: Mic in (jack)] [recsrc: vol, mic] pcm0: | pcm0: + <- nid=3D21 [pin: line in (jack)] [recsrc: vol, line] pcm0: | pcm0: + <- nid=3D32 [audio mixer] [recsrc: vol, line, mic] pcm0: | pcm0: + <- nid=3D37 [audio selector] pcm0:=20 pcm0: +--------------------------------------+ pcm0: | DUMPING PCM Playback/Record Channels | pcm0: +--------------------------------------+ pcm0:=20 pcm0: PCM Playback: 1 pcm0: Stream cap: 0x00000001 pcm0: Format: PCM pcm0: PCM cap: 0x000e07ff pcm0: PCM size: 16 20 24 pcm0: PCM rate: 8 11 16 22 32 44 48 88 96 176 192 pcm0: DAC: 3 4 pcm0:=20 pcm0: PCM Record: 1 pcm0: Stream cap: 0x00000001 pcm0: Format: PCM pcm0: PCM cap: 0x000e07ff pcm0: PCM size: 16 20 24 pcm0: PCM rate: 8 11 16 22 32 44 48 88 96 176 192 pcm0: ADC: 8 9 ATA PseudoRAID loaded lapic1: Forcing LINT1 to edge trigger SMP: AP CPU #1 Launched! cpu1 AP: ID: 0x01000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00008400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000 ioapic0: Assigning ISA IRQ 1 to local APIC 0 ioapic0: Assigning ISA IRQ 4 to local APIC 1 ioapic0: Assigning ISA IRQ 6 to local APIC 0 ioapic0: Assigning ISA IRQ 7 to local APIC 1 ioapic0: Assigning ISA IRQ 9 to local APIC 0 ioapic0: Assigning ISA IRQ 14 to local APIC 1 ioapic0: Assigning ISA IRQ 15 to local APIC 0 ioapic0: Assigning PCI IRQ 16 to local APIC 1 ioapic0: Assigning PCI IRQ 17 to local APIC 0 ioapic0: Assigning PCI IRQ 18 to local APIC 1 ioapic0: Assigning PCI IRQ 22 to local APIC 0 ioapic0: Assigning PCI IRQ 23 to local APIC 1 msi: Assigning MSI IRQ 256 to local APIC 0 WARNING: WITNESS option enabled, expect reduced performance. GEOM: new disk ad8 lock order reversal: 1st 0xc525a278 devfs (devfs) @ /usr/src/sys/kern/vfs_subr.c:2061 2nd 0xc5221b54 devfsmount (devfsmount) @ /usr/src/sys/fs/devfs/devfs_vnops= .c:201 KDB: stack backtrace: db_trace_self_wrapper(c0bb1f6a,e3a47bbc,c083df5e,c0bb43b4,c5221b54,...) at = db_trace_self_wrapper+0x26 kdb_backtrace(c0bb43b4,c5221b54,c0ba59a4,c0ba59a4,c0ba59e5,...) at kdb_back= trace+0x29 witness_checkorder(c5221b54,9,c0ba59e5,c9,c7,...) at witness_checkorder+0x6= de _sx_xlock(c5221b54,0,c0ba59e5,c9,c5221b54,...) at _sx_xlock+0x7d devfs_allocv(c521ba00,c5259000,e3a47c28,c4e72cc0,c0bba0ab,...) at devfs_all= ocv+0x144 devfs_root(c5259000,2,c0d41898,c4e72cc0,ca,...) at devfs_root+0x51 set_rootvnode(c0d41880,0,c0bba0ab,5ed,c087b530,...) at set_rootvnode+0x2b vfs_mountroot(c0cef490,4,c0ba9e35,260,0,...) at vfs_mountroot+0x356 start_init(0,e3a47d38,c0bab743,30c,c4e70ab0,...) at start_init+0x65 fork_exit(c07cd650,0,e3a47d38) at fork_exit+0xb8 fork_trampoline() at fork_trampoline+0x8 --- trap 0, eip =3D 0, esp =3D 0xe3a47d70, ebp =3D 0 --- Trying to mount root from ufs:/dev/ad8s4a lock order reversal: 1st 0xc506bd18 ufs (ufs) @ /usr/src/sys/kern/vfs_subr.c:2061 2nd 0xc5259000 vfslock (vfslock) @ /usr/src/sys/kern/vfs_subr.c:364 KDB: stack backtrace: db_trace_self_wrapper(c0bb1f6a,e3a479dc,c083df5e,c0bb43b4,c5259000,...) at = db_trace_self_wrapper+0x26 kdb_backtrace(c0bb43b4,c5259000,c0bba1a9,c0bba1a9,c0bba746,...) at kdb_back= trace+0x29 witness_checkorder(c5259000,1,c0bba746,16c,e3a47a1c,...) at witness_checkor= der+0x6de _lockmgr(c5259000,2001,c5259030,c0bba746,16c,...) at _lockmgr+0x1e5 vfs_busy(c5259000,0,0,c4e72cc0,e3a47b50,...) at vfs_busy+0x198 lookup(e3a47b3c,c0bb9e59,c6,bf,c4e4242c,...) at lookup+0x7b4 namei(e3a47b3c,c4e72d54,c0c87e64,c0bba0ab,c5259030,...) at namei+0x34b kern_unlink(c4e72cc0,c0bba4e8,1,628,0,...) at kern_unlink+0x40 vfs_mountroot_try(c0bba6a2,c0ba8b5b,c0ba1a9b,1,c087b530,...) at vfs_mountro= ot_try+0x480 vfs_mountroot(c0cef490,4,c0ba9e35,260,0,...) at vfs_mountroot+0x418 start_init(0,e3a47d38,c0bab743,30c,c4e70ab0,...) at start_init+0x65 fork_exit(c07cd650,0,e3a47d38) at fork_exit+0xb8 fork_trampoline() at fork_trampoline+0x8 --- trap 0, eip =3D 0, esp =3D 0xe3a47d70, ebp =3D 0 --- start_init: trying /sbin/init lock order reversal: 1st 0xc4e76044 user map (user map) @ /usr/src/sys/vm/vm_map.c:3111 2nd 0xc506baf8 ufs (ufs) @ /usr/src/sys/kern/vfs_subr.c:2061 KDB: stack backtrace: db_trace_self_wrapper(c0bb1f6a,e3a479d0,c083df5e,c0bb43b4,c506baf8,...) at = db_trace_self_wrapper+0x26 kdb_backtrace(c0bb43b4,c506baf8,c0ba940e,c0ba940e,c0bba746,...) at kdb_back= trace+0x29 witness_checkorder(c506baf8,1,c0bba746,80d,e3a47a04,...) at witness_checkor= der+0x6de _lockmgr(c506baf8,3041,c506bb28,c0bba746,80d,...) at _lockmgr+0x1e5 ffs_lock(e3a47a78,c07f6a5d,c0cfaa74,3041,c506baa0,...) at ffs_lock+0x8a VOP_LOCK1_APV(c0ca39a0,e3a47a78,c0ba8b59,3,c506bb28,...) at VOP_LOCK1_APV+0= xa5 _vn_lock(c506baa0,3041,c0bba746,80d,0,...) at _vn_lock+0xf2 vget(c506baa0,3041,c4e72cc0,4a9,c1460480,...) at vget+0x109 vnode_pager_lock(c1460300,0,c0bd1c78,127,e3a47be8,...) at vnode_pager_lock+= 0x1ad vm_fault(c4e76000,80d3000,2,8,80d3800,...) at vm_fault+0x1df trap_pfault(5,0,c0bdffec,2c8,c4e70ab0,...) at trap_pfault+0x118 trap(e3a47d38) at trap+0x267 calltrap() at calltrap+0x6 --- trap 0xc, eip =3D 0x80480e5, esp =3D 0xbfbfeef0, ebp =3D 0xbfbfef10 --- em0: Link is up 100 Mbps Full Duplex em0: link state changed to UP obreak: MAP_WIREFUTURE set Linux ELF exec handler installed link_elf: symbol msleep undefined Linux ELF exec handler removed Waiting (max 60 seconds) for system process `vnlru' to stop...done Waiting (max 60 seconds) for system process `bufdaemon' to stop...done Waiting (max 60 seconds) for system process `syncer' to stop... Syncing disks, vnodes remaining...5 4 4 4 4 4 0 0 0 0 0 done All buffers synced. Swap device ad8s4b removed. Uptime: 5m46s acpi_button0: wake_prep disabled wake for \_SB_.VBTN (S5) unknown: wake_prep disabled wake for \_SB_.PCI0.ISA_.MOU_ (S5) uhci2: wake_prep disabled wake for \_SB_.PCI0.USB0 (S5) uhci3: wake_prep disabled wake for \_SB_.PCI0.USB1 (S5) uhci4: wake_prep disabled wake for \_SB_.PCI0.USB2 (S5) uhci0: wake_prep disabled wake for \_SB_.PCI0.USB3 (S5) uhci1: wake_prep disabled wake for \_SB_.PCI0.USB4 (S5) unknown: wake_prep disabled wake for \_SB_.PCI0.USB5 (S5) Rebooting... cpu_reset: Stopping other CPUs ~ [EOT] --T3szOYASPyCoAfS0-- --KYiQozSDGNqzVCz3 Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.0 (FreeBSD) iEYEARECAAYFAkfheosACgkQmprOCmdXAD04WwCfUKtl2MWmx0AzUKdStB6k8nmw aHsAnjDiH5yAev5E7uwy9DV173R7tsSK =5ZoI -----END PGP SIGNATURE----- --KYiQozSDGNqzVCz3-- From owner-freebsd-hardware@FreeBSD.ORG Wed Mar 19 20:46:47 2008 Return-Path: Delivered-To: freebsd-hardware@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 66BBA1065672 for ; Wed, 19 Mar 2008 20:46:47 +0000 (UTC) (envelope-from 3pnXhRwAAEEUmyllizk-ohyk3hylmyllizk.vyn@calendar-server.bounces.google.com) Received: from ug-out-f140.google.com (ug-out-f140.google.com [66.249.92.140]) by mx1.freebsd.org (Postfix) with ESMTP id 5974A8FC18 for ; Wed, 19 Mar 2008 20:46:46 +0000 (UTC) (envelope-from 3pnXhRwAAEEUmyllizk-ohyk3hylmyllizk.vyn@calendar-server.bounces.google.com) Received: by ug-out-f140.google.com with SMTP id 37so341024ugi.3 for ; Wed, 19 Mar 2008 13:46:45 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=beta; h=domainkey-signature:mime-version:message-id:date:reply-to:sender:received:subject:from:to:content-type; bh=u9Nb9uK6kFYMQ58GcWzh3XxnE46e5R+K0uGOGKQ9Rkw=; b=E1Q+EnApbaMKkCrV3jhZsfzw8aWTENeZlWcYs/MU6W/R6pukpNPqIQSRiCbrszgGesCRsHAyVYuQvjH1CvxRGw== DomainKey-Signature: a=rsa-sha1; c=nofws; d=google.com; s=beta; h=mime-version:message-id:date:reply-to:sender:subject:from:to:content-type; b=rmziJ2c4CGP39NHsVVOSu4CP+GFhB/rtaPvmST3lTgfODyBbm/uhAy2X0r62mNDjGVncaKfJWUXpd58grScdkA== MIME-Version: 1.0 Message-ID: <0014850b2cf60448cffd78eb5b15696@google.com> Date: Wed, 19 Mar 2008 13:20:54 -0700 Sender: Google Calendar Received: by 10.67.25.9 with SMTP id c9mr334458ugj.8.1205958054832; Wed, 19 Mar 2008 13:20:54 -0700 (PDT) From: DR PAUL TOHO To: freebsd-hardware@freebsd.org Content-Type: multipart/mixed; boundary=0014850b2cf60448cffd78eb2cb3ca0 X-Content-Filtered-By: Mailman/MimeDel 2.1.5 Subject: [Invitation] YOUR SWIFT ATM CARD PAYMENT IS READY @ Wed Mar 19 12:30pm - 1:30pm () X-BeenThere: freebsd-hardware@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: DR PAUL TOHO List-Id: General discussion of FreeBSD hardware List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 19 Mar 2008 20:46:47 -0000 --0014850b2cf60448cffd78eb2cb3ca0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit freebsd-hardware@freebsd.org, you are invited to Title: YOUR SWIFT ATM CARD PAYMENT IS READY Time: Wed Mar 19 12:30pm - 1:30pm (Timezone: Puerto Rico) Where: YOUR SWIFT ATM CARD PAYMENT IS READY Calendar: Description: OFFICE OF THE DIRECTOR OF OPERATION INTERNATIONAL CREDIT SETTLEMENT, THE NEW DELIVERY PAYMENT OFFICE DIRECT SECURITY LINE: +234-80-562-79175 EMAIL:-(drpaul010@live.com) GOOD DAY, THIS IS TO OFFICIALLY INFORM YOU THAT WE HAVE VERIFIED YOUR CONTRACT/INHERITANCE FILE AND FOUND OUT THAT WHY YOU HAVE NOT YET RECEIVED YOUR CONTRACT PAYMENT IS BECAUSE YOU HAVE NOT FULFILLED THE OBLIGATIONS GIVEN TO YOU IN RESPECT OF YOUR CONTRACT/INHERITANCE PAYMENT. SECONDLY WE HAVE BEEN INFORMED THAT YOU ARE STILL DEALING WITH THE NONE-OFFICIALS IN THE BANK ALL YOUR ATTEMPT TO SECURE THE RELEASE OF THE FUND TO YOU. WE WISH TO ADVISE YOU THAT SUCH AN ILLEGAL ACT LIKE THIS HAVE TO STOP IF YOU WISHES TO RECEIVE YOUR PAYMENT SINCE WE HAVE DECIDED TO BRING A SOLUTION TO YOUR PROBLEM. RIGHT NOW WE HAVE ARRANGED YOUR PAYMENT THROUGH OUR SWIFT CARD PAYMENTCENTER ASIA PACIFIC, THAT IS THE LATEST INSTRUCTION FROM OUR NEW PRESIDENT, UMARU MUSA YAR'ADUA (GCFR) FEDERAL REPUBLIC OF NIGERIA. NOTE THAT THIS CARD CENTER WILL SEND YOU AN ATM CARD WHICH YOU WILL USE TO WITHDRAW YOUR MONEY IN ANY ATM MACHINE IN ANY PART OF THE WORLD, BUT THE MAXIMUM IS TWENTY THOUSAND DOLLARS PER DAY, SO IF YOU LIKE TO RECIEVE YOUR FUND THIS WAY PLEASE LET ME KNOW BY CONTACTING THIS OFFICE AND ALSO SEND THE SEND THIS FOLLOWING INFORMATION BELOW TO THIS EMAIL:drpaul010@live.com 1. FULL NAME 2. PHONE AND FAX NUMBER 3. ADDRESS WERE YOU WANT THEM TO SEND THE ATM CARD TO( P.O BOX NOT ACCEPTABLE) 4. YOUR AGE AND CURRENT OCCUPATION 5. A COPY OF YOUR IDENTIFICATION THIS ATM CARD PAYMENT CENTER HAS BEEN MANDATED TO ISSUE OUT $8,300,000.00 AS PART PAYMENT FOR THIS FISCAL NEW YEAR 2008. ALSO FOR YOUR INFORMATION, YOU HAVE TO STOP ANY FURTHER COMMUNICATION WITH ANY OTHER PERSON(S) OR OFFICE(s) TO AVOID ANY HITCHES IN RECEIVING YOUR ATM CARD PAYMENT.FOR ORAL DISCUSSION, I CAN BE REACHED ON +234-80-562-79175 OR EMAIL ME (drpaul010@live.com) AS SOON AS YOU RECEIVE THIS IMPORTANT MESSAGE FOR FURTHER DIRECTION. NOTE THAT BECAUSE OF IMPOSTORS, I HEREBY ISSUED YOU OUR CODE OF CONDUCT, WHICH IS (ATM-811) SO YOU HAVE TO INDICATE THIS CODE WHEN CONTACTING ME BY USING IT AS YOUR SUBJECT. REGARDS, DR. PAUL TOHO CHIEF AUDITOR TO THE PRESIDENT FEDERAL REPUBLIC OF NIGERIA DIRECT SECURITY LINE: +234-80-562-79175 You can view this event at http://www.google.com/calendar/event?action=VIEW&eid=ZnFoMXE3dGEyODhjamJtNWhycTlscnQ4MDggZnJlZWJzZC1oYXJkd2FyZUBmcmVlYnNkLm9yZw&tok=MjQjZHJwYXVsdG9obzIwMjBAZ21haWwuY29tNjAyMjIwYTliMDZiOWU0ZjIxNDYzNDgwNDVjNDg1MTAzZTgxNGQxNg&ctz=America%2FPuerto_Rico&hl=en You are receiving this courtesy email at the account freebsd-hardware@freebsd.org because you are an attendee of this event. To stop receiving future notifications for this event, decline this event. Alternatively you can sign up for a Google Calendar account at http://www.google.com/calendar/ and control your notification settings for your entire calendar. --0014850b2cf60448cffd78eb2cb3ca0-- From owner-freebsd-hardware@FreeBSD.ORG Thu Mar 20 11:28:08 2008 Return-Path: Delivered-To: freebsd-hardware@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 1F1541065672 for ; Thu, 20 Mar 2008 11:28:08 +0000 (UTC) (envelope-from hopet@ics.muni.cz) Received: from minas.ics.muni.cz (minas.ics.muni.cz [147.251.4.40]) by mx1.freebsd.org (Postfix) with ESMTP id 10DF98FC12 for ; Thu, 20 Mar 2008 11:28:05 +0000 (UTC) (envelope-from hopet@ics.muni.cz) Received: from KLOBOUCEK (dhcp3-82.ics.muni.cz [147.251.3.82]) (authenticated user=hopet@ICS.MUNI.CZ bits=0) by minas.ics.muni.cz (8.13.8/8.13.8/SuSE Linux 0.8) with ESMTP id m2KBQbnQ021098 (version=TLSv1/SSLv3 cipher=RC4-MD5 bits=128 verify=NO); Thu, 20 Mar 2008 12:26:38 +0100 From: "Petr Holub" To: "'Sam Leffler'" References: <003201c87aba$1ecdd210$5c697630$@muni.cz> <47C86BF5.8010306@errno.com> <018401c8899e$206076d0$61216470$@muni.cz> <47E15497.7060900@errno.com> In-Reply-To: <47E15497.7060900@errno.com> Date: Thu, 20 Mar 2008 12:26:28 +0100 Message-ID: <001c01c88a7d$429e6100$c7db2300$@muni.cz> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit X-Mailer: Microsoft Office Outlook 12.0 thread-index: AciJ8EAPbAadUUEkQKOzWBrx3jSIMgAjG+0Q Content-Language: cs x-cr-hashedpuzzle: LBo= ADIh ECOe Epem Fb4w G+md HO4t Hmz6 IPs8 Kt6q NbGQ PY14 QhDT SkJK UApt UKMK; 2; ZgByAGUAZQBiAHMAZAAtAGgAYQByAGQAdwBhAHIAZQBAAGYAcgBlAGUAYgBzAGQALgBvAHIAZwA7AHMAYQBtAEAAZQByAHIAbgBvAC4AYwBvAG0A; Sosha1_v1; 7; {52F19CCD-C503-4896-8C06-13BABEA80CE1}; aABvAHAAZQB0AEAAaQBjAHMALgBtAHUAbgBpAC4AYwB6AA==; Thu, 20 Mar 2008 11:26:12 GMT; UgBFADoAIABzAHUAcABwAG8AcgB0ACAAZgBvAHIAIABQAHIAbwB4AGkAbQAgAFMAaQBsAHYAZQByACAAdwBpAGYAaQAgAGMAYQByAGQA x-cr-puzzleid: {52F19CCD-C503-4896-8C06-13BABEA80CE1} X-Muni-Spam-TestIP: 147.251.3.82 X-Muni-Envelope-From: hopet@ics.muni.cz X-Muni-Virus-Test: Clean X-Greylist: Sender succeeded SMTP AUTH authentication, not delayed by milter-greylist-3.0 (minas.ics.muni.cz [147.251.4.35]); Thu, 20 Mar 2008 12:26:38 +0100 (CET) Cc: freebsd-hardware@freebsd.org Subject: RE: support for Proxim Silver wifi card X-BeenThere: freebsd-hardware@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: General discussion of FreeBSD hardware List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 20 Mar 2008 11:28:08 -0000 Sam, > laptop. I happen to have a t61p and just tried a bunch of different > cards (including one w/ this device id) and all the cards I expected to > work so the best I can suggest is you try the card in another laptop. it really looks like there's something weird about the PCCARD slot in (my) T61p. I tried with an older T41p running 6.2-RELEASE-p4 and the card successfully works, see the verbose dmesg excerpt (complete one is below my signature): pcib2: cardbus0 requested memory range 0xc0200000-0xcfffffff: good pcib2: cardbus0 requested memory range 0xc0200000-0xcfffffff: good pcib2: cardbus0 requested memory range 0xc0240000-0xc024ffff: good found-> vendor=0x168c, dev=0x0013, revid=0x01 bus=3, slot=0, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x0290, cachelnsz=8 (dwords) lattimer=0xa8 (5040 ns), mingnt=0x0a (2500 ns), maxlat=0x1c (7000 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 ath0: mem 0xc0240000-0xc024ffff irq 11 at device 0.0 on cardbus0 ath0: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xc0240000 ath0: Reserved 0x1 bytes for rid 0 type 1 at 0xb ath0: [MPSAFE] ath0: bpf attached ath0: Ethernet address: 00:20:a6:4c:71:3a ath0: bpf attached ath0: bpf attached ath0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps ath0: turboA rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps ath0: mac 5.6 phy 4.1 5ghz radio 1.7 2ghz radio 2.3 ath0: Use hw queue 1 for WME_AC_BE traffic ath0: Use hw queue 0 for WME_AC_BK traffic ath0: Use hw queue 2 for WME_AC_VI traffic ath0: Use hw queue 3 for WME_AC_VO traffic ath0: Use hw queue 8 for CAB traffic ath0: Use hw queue 9 for beacons So I assume it should work on 7.0 and the problem is elsewhere... any ideas on further debugging? Maybe if imp@ could help with this? Thanks a lot, Petr ================================================================ Petr Holub CESNET z.s.p.o. Supercomputing Center Brno Zikova 4 Institute of Compt. Science 162 00 Praha 6, CZ Masaryk University Czech Republic Botanicka 68a, 60200 Brno, CZ e-mail: Petr.Holub@cesnet.cz phone: +420-549493944 fax: +420-541212747 e-mail: hopet@ics.muni.cz Copyright (c) 1992-2007 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 6.2-RELEASE-p4 #0: Thu Apr 26 17:55:55 UTC 2007 root@i386-builder.daemonology.net:/usr/obj/usr/src/sys/SMP Preloaded elf kernel "/boot/kernel/kernel" at 0xc0bab000. Preloaded elf module "/boot/kernel/snd_ich.ko" at 0xc0bab19c. Preloaded elf module "/boot/kernel/sound.ko" at 0xc0bab248. Preloaded elf module "/boot/kernel/acpi_ibm.ko" at 0xc0bab2f4. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0bab3a4. Preloaded elf module "/boot/kernel/ng_ubt.ko" at 0xc0bab450. Preloaded elf module "/boot/kernel/netgraph.ko" at 0xc0bab4fc. Preloaded elf module "/boot/kernel/atapicam.ko" at 0xc0bab5ac. Calibrating clock(s) ... i8254 clock: 1193148 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 1694510444 Hz CPU: Intel(R) Pentium(R) M processor 1700MHz (1694.51-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x695 Stepping = 5 Features=0xa7e9f9bf Features2=0x180 real memory = 1609957376 (1535 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009dfff, 643072 bytes (157 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000000c28000 - 0x000000005e416fff, 1568600064 bytes (382959 pages) avail memory = 1568276480 (1495 MB) bios32: Found BIOS32 Service Directory header at 0xc00f6d20 bios32: Entry = 0xfd750 (c00fd750) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xfd6e0+0x1f6 pnpbios: Found PnP BIOS data at 0xc00f6da0 pnpbios: Entry = f0000:b614 Rev = 1.0 pnpbios: Event flag at 4b4 Other BIOS signatures found: wlan: <802.11 Link Layer> ath_rate: version 1.2 random: nfslock: pseudo-device io: kbd: new array size 4 kbd1 at kbdmux0 mem: Pentium Pro MTRR support enabled null: ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) rr232x: RocketRAID 232x controller driver v1.02 (Apr 26 2007 17:55:39) npx0: INT 16 interface acpi0: on motherboard acpi0: [MPSAFE] acpi_ec0: port 0x62,0x66 on acpi0 pci_open(1): mode 1 addr port (0x0cf8) is 0x8000f904 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=33408086) pcibios: BIOS version 2.10 Found $PIR table, 15 entries at 0xc00fdea0 PCI-Only Interrupts: none Location Bus Device Pin Link IRQs embedded 0 0 A 0x60 3 4 5 6 7 9 10 11 12 14 15 embedded 0 0 B 0x61 3 4 5 6 7 9 10 11 12 14 15 embedded 0 0 C 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 0 0 D 0x63 3 4 5 6 7 9 10 11 12 14 15 embedded 0 2 A 0x60 3 4 5 6 7 9 10 11 12 14 15 embedded 0 2 B 0x61 3 4 5 6 7 9 10 11 12 14 15 embedded 0 1 A 0x60 3 4 5 6 7 9 10 11 12 14 15 embedded 0 1 B 0x61 3 4 5 6 7 9 10 11 12 14 15 embedded 1 0 A 0x60 3 4 5 6 7 9 10 11 12 14 15 embedded 1 0 B 0x61 3 4 5 6 7 9 10 11 12 14 15 embedded 0 30 A 0x60 3 4 5 6 7 9 10 11 12 14 15 embedded 0 30 B 0x61 3 4 5 6 7 9 10 11 12 14 15 embedded 0 30 C 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 0 30 D 0x63 3 4 5 6 7 9 10 11 12 14 15 embedded 2 0 A 0x60 3 4 5 6 7 9 10 11 12 14 15 embedded 2 0 B 0x61 3 4 5 6 7 9 10 11 12 14 15 embedded 2 0 C 0x62 3 4 5 6 7 9 10 11 12 14 15 slot 1 2 2 A 0x62 3 4 5 6 7 9 10 11 12 14 15 slot 1 2 2 B 0x63 3 4 5 6 7 9 10 11 12 14 15 embedded 2 3 A 0x60 3 4 5 6 7 9 10 11 12 14 15 embedded 2 3 B 0x61 3 4 5 6 7 9 10 11 12 14 15 embedded 2 3 C 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 2 3 D 0x63 3 4 5 6 7 9 10 11 12 14 15 slot 2 9 0 A 0x60 3 4 5 6 7 9 10 11 12 14 15 slot 2 9 0 B 0x61 3 4 5 6 7 9 10 11 12 14 15 slot 2 9 0 C 0x62 3 4 5 6 7 9 10 11 12 14 15 slot 2 9 0 D 0x63 3 4 5 6 7 9 10 11 12 14 15 embedded 9 1 A 0x61 3 4 5 6 7 9 10 11 12 14 15 embedded 9 2 A 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 9 2 B 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 2 1 A 0x60 3 4 5 6 7 9 10 11 12 14 15 embedded 2 8 A 0x68 3 4 5 6 7 9 10 11 12 14 15 embedded 0 29 A 0x60 3 4 5 6 7 9 10 11 12 14 15 embedded 0 29 B 0x63 3 4 5 6 7 9 10 11 12 14 15 embedded 0 29 C 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 0 29 D 0x6b 3 4 5 6 7 9 10 11 12 14 15 embedded 0 31 A 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 0 31 B 0x61 3 4 5 6 7 9 10 11 12 14 15 AcpiOsDerivePciId: bus 0 dev 31 func 0 AcpiOsDerivePciId: bus 0 dev 0 func 0 AcpiOsDerivePciId: bus 2 dev 0 func 0 AcpiOsDerivePciId: bus 2 dev 0 func 1 AcpiOsDerivePciId: bus 0 dev 29 func 7 acpi0: Power Button (fixed) acpi0: wakeup code va 0xd970d000 pa 0x90000 atpic: Programming IRQ9 as level/low ACPI timer: 1/0 1/0 1/0 1/0 1/0 1/0 1/0 1/0 1/0 1/0 -> 10 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 pci_link0: Links after initial probe: Index IRQ Rtd Ref IRQs 0 11 N 0 3 4 5 6 7 9 10 11 pci_link0: Links after initial validation: Index IRQ Rtd Ref IRQs 0 11 N 0 3 4 5 6 7 9 10 11 pci_link0: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 9 10 11 pci_link1: Links after initial probe: Index IRQ Rtd Ref IRQs 0 11 N 0 3 4 5 6 7 9 10 11 pci_link1: Links after initial validation: Index IRQ Rtd Ref IRQs 0 11 N 0 3 4 5 6 7 9 10 11 pci_link1: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 9 10 11 pci_link2: Links after initial probe: Index IRQ Rtd Ref IRQs 0 11 N 0 3 4 5 6 7 9 10 11 pci_link2: Links after initial validation: Index IRQ Rtd Ref IRQs 0 11 N 0 3 4 5 6 7 9 10 11 pci_link2: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 9 10 11 pci_link3: Links after initial probe: Index IRQ Rtd Ref IRQs 0 11 N 0 3 4 5 6 7 9 10 11 pci_link3: Links after initial validation: Index IRQ Rtd Ref IRQs 0 11 N 0 3 4 5 6 7 9 10 11 pci_link3: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 9 10 11 pci_link4: Links after initial probe: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 9 10 11 pci_link4: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 9 10 11 pci_link4: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 9 10 11 pci_link5: Links after initial probe: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 9 10 11 pci_link5: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 9 10 11 pci_link5: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 9 10 11 pci_link6: Links after initial probe: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 9 10 11 pci_link6: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 9 10 11 pci_link6: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 9 10 11 pci_link7: Links after initial probe: Index IRQ Rtd Ref IRQs 0 11 N 0 3 4 5 6 7 9 10 11 pci_link7: Links after initial validation: Index IRQ Rtd Ref IRQs 0 11 N 0 3 4 5 6 7 9 10 11 pci_link7: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 9 10 11 cpu0: on acpi0 acpi_perf0: on cpu0 acpi_throttle0: on cpu0 acpi_throttle0: P_CNT from P_BLK 0x1010 acpi_lid0: on acpi0 acpi_button0: on acpi0 pcib0: port 0xcf8-0xcff on acpi0 ACPI: Found matching pin for 0.29.INTA at func 0: 11 ACPI: Found matching pin for 0.29.INTB at func 1: 11 ACPI: Found matching pin for 0.29.INTC at func 2: 11 ACPI: Found matching pin for 0.29.INTD at func 7: 11 ACPI: Found matching pin for 0.31.INTA at func 1: 255 ACPI: Found matching pin for 0.31.INTB at func 3: 11 pci0: on pcib0 pci0: physical bus=0 found-> vendor=0x8086, dev=0x3340, revid=0x03 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x2090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type 3, range 32, base d0000000, size 28, enabled found-> vendor=0x8086, dev=0x3341, revid=0x03 bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x00a0, cachelnsz=0 (dwords) lattimer=0x60 (2880 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x24c2, revid=0x01 bus=0, slot=29, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 map[20]: type 4, range 32, base 00001800, size 5, enabled pcib0: matched entry for 0.29.INTA (src \\_SB_.LNKA:0) pcib0: slot 29 INTA routed to irq 11 via \\_SB_.LNKA found-> vendor=0x8086, dev=0x24c4, revid=0x01 bus=0, slot=29, func=1 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 map[20]: type 4, range 32, base 00001820, size 5, enabled pcib0: matched entry for 0.29.INTB (src \\_SB_.LNKD:0) pcib0: slot 29 INTB routed to irq 11 via \\_SB_.LNKD found-> vendor=0x8086, dev=0x24c7, revid=0x01 bus=0, slot=29, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=11 map[20]: type 4, range 32, base 00001840, size 5, enabled pcib0: matched entry for 0.29.INTC (src \\_SB_.LNKC:0) pcib0: slot 29 INTC routed to irq 11 via \\_SB_.LNKC found-> vendor=0x8086, dev=0x24cd, revid=0x01 bus=0, slot=29, func=7 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=11 powerspec 2 supports D0 D3 current D0 map[10]: type 1, range 32, base c0000000, size 10, enabled pcib0: matched entry for 0.29.INTD (src \\_SB_.LNKH:0) pcib0: slot 29 INTD routed to irq 11 via \\_SB_.LNKH found-> vendor=0x8086, dev=0x2448, revid=0x81 bus=0, slot=30, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x8080, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x24cc, revid=0x01 bus=0, slot=31, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x24ca, revid=0x01 bus=0, slot=31, func=1 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 map[20]: type 4, range 32, base 00001860, size 4, enabled map[24]: type 1, range 32, base 00000000, size 10, memory disabled found-> vendor=0x8086, dev=0x24c3, revid=0x01 bus=0, slot=31, func=3 class=0c-05-00, hdrtype=0x00, mfdev=0 cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 map[20]: type 4, range 32, base 00001880, size 5, enabled pcib0: matched entry for 0.31.INTB (src \\_SB_.LNKB:0) pcib0: slot 31 INTB routed to irq 11 via \\_SB_.LNKB found-> vendor=0x8086, dev=0x24c5, revid=0x01 bus=0, slot=31, func=5 class=04-01-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 powerspec 2 supports D0 D3 current D0 map[10]: type 4, range 32, base 00001c00, size 8, enabled map[14]: type 4, range 32, base 000018c0, size 6, enabled map[18]: type 1, range 32, base c0000c00, size 9, enabled map[1c]: type 1, range 32, base c0000800, size 8, enabled pcib0: matched entry for 0.31.INTB (src \\_SB_.LNKB:0) pcib0: slot 31 INTB routed to irq 11 via \\_SB_.LNKB found-> vendor=0x8086, dev=0x24c6, revid=0x01 bus=0, slot=31, func=6 class=07-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 powerspec 2 supports D0 D3 current D0 map[10]: type 4, range 32, base 00002400, size 8, enabled map[14]: type 4, range 32, base 00002000, size 7, enabled pcib0: matched entry for 0.31.INTB (src \\_SB_.LNKB:0) pcib0: slot 31 INTB routed to irq 11 via \\_SB_.LNKB agp0: mem 0xd0000000-0xdfffffff at device 0.0 on pci0 agp0: Reserved 0x10000000 bytes for rid 0x10 type 3 at 0xd0000000 agp0: allocating GATT for aperture of size 256M pcib1: at device 1.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0x3000-0x3fff pcib1: memory decode 0xc0100000-0xc01fffff pcib1: prefetched decode 0xe0000000-0xe7ffffff ACPI: Found matching pin for 1.0.INTA at func 0: 11 pci1: on pcib1 pci1: physical bus=1 found-> vendor=0x1002, dev=0x4e54, revid=0x80 bus=1, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0307, statreg=0x02b0, cachelnsz=8 (dwords) lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 3, range 32, base e0000000, size 27, enabled pcib1: (null) requested memory range 0xe0000000-0xe7ffffff: good map[14]: type 4, range 32, base 00003000, size 8, enabled pcib1: (null) requested I/O range 0x3000-0x30ff: in range map[18]: type 1, range 32, base c0100000, size 16, enabled pcib1: (null) requested memory range 0xc0100000-0xc010ffff: good pcib1: matched entry for 1.0.INTA (src \\_SB_.LNKA:0) pcib1: slot 0 INTA routed to irq 11 via \\_SB_.LNKA pci1: at device 0.0 (no driver attached) uhci0: port 0x1800-0x181f irq 11 at device 29.0 on pci0 uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1800 uhci0: [GIANT-LOCKED] usb0: on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: port 0x1820-0x183f irq 11 at device 29.1 on pci0 uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1820 uhci1: [GIANT-LOCKED] usb1: on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: port 0x1840-0x185f irq 11 at device 29.2 on pci0 uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1840 uhci2: [GIANT-LOCKED] usb2: on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered ehci0: mem 0xc0000000-0xc00003ff irq 11 at device 29.7 on pci0 ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xc0000000 ehci0: [GIANT-LOCKED] usb3: EHCI version 1.0 usb3: companion controllers, 2 ports each: usb0 usb1 usb2 usb3: on ehci0 usb3: USB revision 2.0 uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub3: 6 ports with 6 removable, self powered pcib2: at device 30.0 on pci0 pcib2: secondary bus 2 pcib2: subordinate bus 8 pcib2: I/O decode 0x4000-0x8fff pcib2: memory decode 0xc0200000-0xcfffffff pcib2: prefetched decode 0xe8000000-0xefffffff pcib2: Subtractively decoded bridge. ACPI: Found matching pin for 2.0.INTA at func 0: 11 ACPI: Found matching pin for 2.0.INTB at func 1: 11 ACPI: Found matching pin for 2.1.INTA at func 0: 11 ACPI: Found matching pin for 2.2.INTA at func 0: 11 pci2: on pcib2 pci2: physical bus=2 found-> vendor=0x104c, dev=0xac46, revid=0x01 bus=2, slot=0, func=0 class=06-07-00, hdrtype=0x02, mfdev=1 cmdreg=0x0107, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0xc0 (48000 ns), maxlat=0x03 (750 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base b0000000, size 12, enabled pcib2: (null) requested memory range 0xb0000000-0xb0000fff: good pcib2: matched entry for 2.0.INTA (src \\_SB_.LNKA:0) pcib2: slot 0 INTA routed to irq 11 via \\_SB_.LNKA found-> vendor=0x104c, dev=0xac46, revid=0x01 bus=2, slot=0, func=1 class=06-07-00, hdrtype=0x02, mfdev=1 cmdreg=0x0107, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0xc0 (48000 ns), maxlat=0x03 (750 ns) intpin=b, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base b1000000, size 12, enabled pcib2: (null) requested memory range 0xb1000000-0xb1000fff: good pcib2: matched entry for 2.0.INTB (src \\_SB_.LNKB:0) pcib2: slot 0 INTB routed to irq 11 via \\_SB_.LNKB found-> vendor=0x8086, dev=0x101e, revid=0x03 bus=2, slot=1, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0117, statreg=0x0230, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type 1, range 32, base c0220000, size 17, enabled pcib2: (null) requested memory range 0xc0220000-0xc023ffff: good map[14]: type 1, range 32, base c0200000, size 16, enabled pcib2: (null) requested memory range 0xc0200000-0xc020ffff: good map[18]: type 4, range 32, base 00008000, size 6, enabled pcib2: (null) requested I/O range 0x8000-0x803f: in range pcib2: matched entry for 2.1.INTA (src \\_SB_.LNKA:0) pcib2: slot 1 INTA routed to irq 11 via \\_SB_.LNKA found-> vendor=0x8086, dev=0x1043, revid=0x04 bus=2, slot=2, func=0 class=02-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0116, statreg=0x0290, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x22 (8500 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 map[10]: type 1, range 32, base c0214000, size 12, enabled pcib2: (null) requested memory range 0xc0214000-0xc0214fff: good pcib2: matched entry for 2.2.INTA (src \\_SB_.LNKC:0) pcib2: slot 2 INTA routed to irq 11 via \\_SB_.LNKC cbb0: mem 0xb0000000-0xb0000fff irq 11 at device 0.0 on pci2 cbb0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xb0000000 cardbus0: on cbb0 pccard0: <16-bit PCCard bus> on cbb0 cbb0: [MPSAFE] cbb0: PCI Configuration space: 0x00: 0xac46104c 0x02100107 0x06070001 0x00824008 0x10: 0xb0000000 0x220000a0 0xb0050302 0xfffff000 0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 0x30: 0x00000000 0xfffffffc 0x00000000 0x0740010b 0x40: 0x05521014 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x0840f071 0x040a0000 0x000f0000 0x01d21b22 0x90: 0x416422c0 0x00000000 0x00000000 0x00000000 0xa0: 0xfe120001 0x00c00000 0x00000000 0x00000000 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 cbb1: mem 0xb1000000-0xb1000fff irq 11 at device 0.1 on pci2 cbb1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xb1000000 cardbus1: on cbb1 pccard1: <16-bit PCCard bus> on cbb1 cbb1: [MPSAFE] cbb1: PCI Configuration space: 0x00: 0xac46104c 0x02100107 0x06070001 0x00824008 0x10: 0xb1000000 0x020000a0 0xb0080602 0xfffff000 0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 0x30: 0x00000000 0xfffffffc 0x00000000 0x0740020b 0x40: 0x05521014 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x0840d071 0x040a0000 0x000f0000 0x01d21b22 0x90: 0x416422c0 0x00000000 0x00000000 0x00000000 0xa0: 0xfe120001 0x00c00000 0x00000000 0x00000000 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 em0: port 0x8000-0x803f mem 0xc0220000-0xc023ffff,0xc0200000-0xc020ffff irq 11 at device 1.0 on pci2 em0: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xc0220000 em0: Reserved 0x40 bytes for rid 0x18 type 4 at 0x8000 em0: bpf attached em0: Ethernet address: 00:0d:60:d0:e5:27 em0: [MPSAFE] pci2: at device 2.0 (no driver attached) isab0: at device 31.0 on pci0 isa0: on isab0 atapci0: port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1860-0x186f at device 31.1 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x1860 ata0: on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00 ata0: reset tp2 stat0=50 stat1=00 devices=0x1 ata0: [MPSAFE] ata1: on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=03 ostat0=51 ostat1=00 ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb ata1: stat1=0x00 err=0x04 lsb=0x00 msb=0x00 ata1: reset tp2 stat0=00 stat1=00 devices=0x4 ata1: [MPSAFE] pci0: at device 31.3 (no driver attached) pcm0: port 0x1c00-0x1cff,0x18c0-0x18ff mem 0xc0000c00-0xc0000dff,0xc0000800-0xc00008ff irq 11 at device 31.5 on pci0 pcm0: Reserved 0x200 bytes for rid 0x18 type 3 at 0xc0000c00 pcm0: Reserved 0x100 bytes for rid 0x1c type 3 at 0xc0000800 pcm0: [MPSAFE] pcm0: pcm0: Codec features headphone, 20 bit DAC, 5 bit master volume, no 3D Stereo Enhancement pcm0: Primary codec extended features variable rate PCM, AMAP, reserved 4 pcm0: ac97 codec dac ready count: 0 pcm0: sndbuf_setmap 5e057000, 4000; 0xf5e26000 -> 5e057000 pcm0: sndbuf_setmap 5e053000, 4000; 0xf5e2a000 -> 5e053000 pci0: at device 31.6 (no driver attached) acpi_tz0: on acpi0 atkbdc0: port 0x60,0x64 irq 1 on acpi0 atkbd0: irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x54ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 atkbd0: [GIANT-LOCKED] psm0: unable to allocate IRQ psmcpnp0: irq 12 on acpi0 psm0: current command byte:0047 psm0: flags 0x2000 irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons psm0: config:00002000, flags:00000008, packet size:3 psm0: syncmask:c0, syncbits:00 fdc0: port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: ic_type 90 part_id 73 fdc0: [MPSAFE] fdc0: [FAST] sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: irq maps: 0x201 0x201 0x201 0x201 sio0: probe failed test(s): 0 1 2 4 6 7 9 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 8250 or not responding ppc0: using extended I/O port range ppc0: SPP ppc0: port 0x3bc-0x3be irq 7 on acpi0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppbus0: on ppc0 plip0: on ppbus0 plip0: bpf attached lpt0: on ppbus0 lpt0: Interrupt-driven port ppi0: on ppbus0 sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: irq maps: 0x201 0x201 0x201 0x201 sio1: probe failed test(s): 0 1 2 4 6 7 9 battery0: on acpi0 acpi_acad0: on acpi0 acpi_ibm0: on acpi0 sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: irq maps: 0x201 0x201 0x201 0x201 sio1: probe failed test(s): 0 1 2 4 6 7 9 unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff ex_isa_identify() ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it fdc: fdc0 already exists; skipping it ppc: ppc0 already exists; skipping it sio: sio0 already exists; skipping it pnp_identify: Trying Read_Port at 203 pnp_identify: Trying Read_Port at 243 pnp_identify: Trying Read_Port at 283 pnp_identify: Trying Read_Port at 2c3 pnp_identify: Trying Read_Port at 303 pnp_identify: Trying Read_Port at 343 pnp_identify: Trying Read_Port at 383 pnp_identify: Trying Read_Port at 3c3 PNP Identify complete ahc_isa_probe 1: ioport 0x1c00 alloc failed sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices pmtimer0 on isa0 orm0: at iomem 0xc0000-0xcffff,0xd0000-0xd0fff,0xd1000-0xd1fff,0xdc000-0xdffff,0xe0000-0xef fff on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fe0: not probed (disabled) ie0: not probed (disabled) lnc0: not probed (disabled) sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd1, terminal emulator: sc (syscons terminal) sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: irq maps: 0x201 0x201 0x201 0x201 sio1: probe failed test(s): 0 1 2 4 6 7 9 sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0 sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 vt0: not probed (disabled) isa_probe_children: probing PnP devices Device configuration finished. Reducing kern.maxvnodes 102135 -> 100000 procfs registered Timecounter "TSC" frequency 1694510444 Hz quality 800 Timecounters tick every 1.000 msec lo0: bpf attached rr232x: no controller detected. fdc0: output ready timeout fdc0: output ready timeout fdc0: output ready timeout fdc0: output ready timeout fdc0: output ready timeout fdc0: output ready timeout fdc0: output ready timeout battery0: battery initialization start acpi_acad0: acline initialization start battery0: battery initialization done, tried 1 times acpi_acad0: On Line acpi_acad0: acline initialization done, tried 1 times ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire ad0: setting PIO4 on ICH4 chip ad0: setting UDMA100 on ICH4 chip ad0: 53959MB at ata0-master UDMA100 ad0: 110509426 sectors [109632C/16H/63S] 16 sectors/interrupt 1 depth queue GEOM: new disk ad0 ad0: Intel check1 failed ad0: Adaptec check1 failed ad0: LSI (v3) check1 failed ad0: LSI (v2) check1 failed ad0: FreeBSD check1 failed ata1-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=80 wire acd0: setting PIO4 on ICH4 chip acd0: setting UDMA33 on ICH4 chip acd0: CDRW drive at ata1 as master acd0: read 4134KB/s (4134KB/s) write 2755KB/s (2755KB/s), 2048KB buffer, UDMA33 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet acd0: Writes: CDR, CDRW, test write, burnproof acd0: Audio: play, 16 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc pcm0: measured ac97 link rate at 47999 Hz, will use 48000 Hz fdc0: output ready timeout fdc0: input ready timeout fdc0: input ready timeout fdc0: output ready timeout fdc0: input ready timeout fdc0: input ready timeout fdc0: output ready timeout fdc0: input ready timeout fdc0: input ready timeout fdc0: output ready timeout fdc0: input ready timeout fdc0: input ready timeout (probe0:ata1:0:0:0): error 22 (probe0:ata1:0:0:0): Unretryable Error (probe0:ata1:0:0:0): error 6 (probe0:ata1:0:0:0): Unretryable Error (probe0:ata1:0:0:0): error 22 (probe0:ata1:0:0:0): Unretryable Error pass0 at ata1 bus 0 target 0 lun 0 pass0: Removable CD-ROM SCSI-0 device pass0: 33.000MB/s transfers GEOM: new disk cd0 ATA PseudoRAID loaded (cd0:ata1:0:0:0): error 6 (cd0:ata1:0:0:0): Unretryable Error cd0 at ata1 bus 0 target 0 lun 0 cd0: Removable CD-ROM SCSI-0 device cd0: 33.000MB/s transfers cd0: Attempt to query device size failed: NOT READY, Medium not present (cd0:ata1:0:0:0): error 6 (cd0:ata1:0:0:0): Unretryable Error (cd0:ata1:0:0:0): error 6 (cd0:ata1:0:0:0): Unretryable Error (cd0:ata1:0:0:0): error 6 (cd0:ata1:0:0:0): Unretryable Error Trying to mount root from ufs:/dev/ad0s2a start_init: trying /sbin/init Linux ELF exec handler installed pcib2: cardbus0 requested memory range 0xc0200000-0xcfffffff: good pcib2: cardbus0 requested memory range 0xc0200000-0xcfffffff: good pcib2: cardbus0 requested memory range 0xc0240000-0xc024ffff: good found-> vendor=0x168c, dev=0x0013, revid=0x01 bus=3, slot=0, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x0290, cachelnsz=8 (dwords) lattimer=0xa8 (5040 ns), mingnt=0x0a (2500 ns), maxlat=0x1c (7000 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 ath0: mem 0xc0240000-0xc024ffff irq 11 at device 0.0 on cardbus0 ath0: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xc0240000 ath0: Reserved 0x1 bytes for rid 0 type 1 at 0xb ath0: [MPSAFE] ath0: bpf attached ath0: Ethernet address: 00:20:a6:4c:71:3a ath0: bpf attached ath0: bpf attached ath0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps ath0: turboA rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps ath0: mac 5.6 phy 4.1 5ghz radio 1.7 2ghz radio 2.3 ath0: Use hw queue 1 for WME_AC_BE traffic ath0: Use hw queue 0 for WME_AC_BK traffic ath0: Use hw queue 2 for WME_AC_VI traffic ath0: Use hw queue 3 for WME_AC_VO traffic ath0: Use hw queue 8 for CAB traffic ath0: Use hw queue 9 for beacons From owner-freebsd-hardware@FreeBSD.ORG Fri Mar 21 08:12:41 2008 Return-Path: Delivered-To: freebsd-hardware@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 3248E106566B for ; Fri, 21 Mar 2008 08:12:41 +0000 (UTC) (envelope-from tedm@toybox.placo.com) Received: from mail.freebsd-corp-net-guide.com (mail.freebsd-corp-net-guide.com [65.75.192.90]) by mx1.freebsd.org (Postfix) with ESMTP id 953B38FC15 for ; Fri, 21 Mar 2008 08:12:40 +0000 (UTC) (envelope-from tedm@toybox.placo.com) Received: from TEDSDSK (nat-rtr.freebsd-corp-net-guide.com [65.75.197.130]) by mail.freebsd-corp-net-guide.com (8.13.8/8.13.8) with SMTP id m2L7lKPj064537; Fri, 21 Mar 2008 00:47:21 -0700 (PDT) (envelope-from tedm@toybox.placo.com) From: "Ted Mittelstaedt" To: "Greg Mars" , , Date: Thu, 20 Mar 2008 23:48:20 -0800 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.6604 (9.0.2911.0) X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1914 In-Reply-To: Importance: Normal X-Greylist: Sender IP whitelisted, not delayed by milter-greylist-3.0 (mail.freebsd-corp-net-guide.com [65.75.192.90]); Fri, 21 Mar 2008 00:47:21 -0700 (PDT) Cc: Subject: RE: Realtek 811B LAN card on FreeBSD 7.0 X-BeenThere: freebsd-hardware@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: General discussion of FreeBSD hardware List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 21 Mar 2008 08:12:41 -0000 > -----Original Message----- > From: owner-freebsd-questions@freebsd.org > [mailto:owner-freebsd-questions@freebsd.org]On Behalf Of Greg Mars > Sent: Monday, March 17, 2008 6:51 PM > To: freebsd-questions@freebsd.org; freebsd-hardware@freebsd.org > Subject: Realtek 811B LAN card on FreeBSD 7.0 > > > A few months ago, I posted asking about how good support the Realtek 8111B > PCI Express LAN chipset is. > The conclusion was that its behavior was rather flaky on FreeBSD 7.0 > > Anyway, I got the motherboard with the chip integrated because the MOBO > otherwise did what I needed. > After installation of FreeBSD/i386 the chip was detected and the re driver > attached but DHCP configuration wouldn't work. After searching on the > internet, I found some patches at > > http://lists.freebsd.org/pipermail/freebsd-amd64/2007-December/010545.html > > http://people.freebsd.org/~yongari/re/if_re.c > > http://people.freebsd.org/~yongari/re/if_rlreg.h > > > > and applied them. > > After rebuilding the kernel, everything worked. > Shortly after I decided I was going to run the FreeBSD/amd64 version > instead. > I had not kept the patches that worked on i386, so I downloaded from the > same URL again. > However, this time, applying the patch resulted in no change: DHCP > configuration still wouldn't work. > > Now, I'm not sure what variable is responsible for this, the > change to amd64 > or whether there was another version of the patch. Interestingly, in the > thread where I found those links, people were running amd64 and had their > problems resolved. I noticed that the version of if_re.c file was 107 the > second time whereas the post said it was 101. > I'm guessing the file was updated at the URL and this resulted in a > regression. > The problem is, I'm not in a position to say exactly which version worked. > > Is there anyone on the list close to this work and would have an idea of > what happened? > I am currently using a PCI lan card that works with the rl driver but it > would be nice to have the integrated chip work too. This sad story is an excellent example of why patches like this need to be run through the standard development using the PR system, not someone's personal website. If they had been you could use cvs to see what was changed. E-mail the person who created the patches. If your lucky he can help you. And for God's sake, once you get a running system, submit a PR with the patches if the person who created them isn't willing to do so. Ted From owner-freebsd-hardware@FreeBSD.ORG Fri Mar 21 19:24:38 2008 Return-Path: Delivered-To: freebsd-hardware@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 4A37B1065670 for ; Fri, 21 Mar 2008 19:24:38 +0000 (UTC) (envelope-from jhb@freebsd.org) Received: from speedfactory.net (mail.speedfactory.net [66.23.216.219]) by mx1.freebsd.org (Postfix) with ESMTP id 3A1548FC1B for ; Fri, 21 Mar 2008 19:24:36 +0000 (UTC) (envelope-from jhb@freebsd.org) Received: from server.baldwin.cx (unverified [66.23.211.162]) by speedfactory.net (SurgeMail 3.8s) with ESMTP id 236285210-1834499 for multiple; Fri, 21 Mar 2008 15:08:50 -0400 Received: from localhost.corp.yahoo.com (john@localhost [127.0.0.1]) (authenticated bits=0) by server.baldwin.cx (8.14.2/8.14.2) with ESMTP id m2LJ7UnZ029638; Fri, 21 Mar 2008 15:07:31 -0400 (EDT) (envelope-from jhb@freebsd.org) From: John Baldwin To: freebsd-hardware@freebsd.org, David Wolfskill Date: Fri, 21 Mar 2008 11:02:35 -0400 User-Agent: KMail/1.9.7 References: <20080318171434.GA49159@bunrab.catwhisker.org> <200803190917.17502.jhb@freebsd.org> <20080319204148.GZ53010@bunrab.catwhisker.org> In-Reply-To: <20080319204148.GZ53010@bunrab.catwhisker.org> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-15" Content-Transfer-Encoding: 7bit Content-Disposition: inline Message-Id: <200803211102.35682.jhb@freebsd.org> X-Greylist: Sender succeeded SMTP AUTH authentication, not delayed by milter-greylist-2.0.2 (server.baldwin.cx [127.0.0.1]); Fri, 21 Mar 2008 15:07:31 -0400 (EDT) X-Virus-Scanned: ClamAV 0.91.2/6316/Fri Mar 21 10:29:54 2008 on server.baldwin.cx X-Virus-Status: Clean X-Spam-Status: No, score=-4.1 required=4.2 tests=ALL_TRUSTED,AWL,BAYES_00, DATE_IN_PAST_03_06 autolearn=ham version=3.1.3 X-Spam-Checker-Version: SpamAssassin 3.1.3 (2006-06-01) on server.baldwin.cx Cc: Subject: Re: Dell Optiplex 755 hangs every other boot before 82801 Family Hub Interface to PCI Bridge probed X-BeenThere: freebsd-hardware@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: General discussion of FreeBSD hardware List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 21 Mar 2008 19:24:38 -0000 On Wednesday 19 March 2008 04:41:48 pm David Wolfskill wrote: > On Wed, Mar 19, 2008 at 09:17:17AM -0400, John Baldwin wrote: > > ... > > Do a verbose boot. It might be enumerating the PCI bus when it hangs or some > > such and a verbose boot would tell us more of where it is at when it hangs. > > Other than that, you'll have to add printfs to track down exactly where it > > hangs. :-/ > > OK; I switched it to boot (verbosely) from slice 4 (HEAD/CURRENT > as of a couple weeks ago) -- figuring that there might be more > "interesting" information available that way, then ran tip(1) within > script(1) to capture the output. > > I edited the typescript file in a couple of ways: > > * I removed the ^M characters (saving about 2K in file size) > * I split the file into "console_755-hang" and "console_755-nohang" to > make comparing the results of the experiments a bit easier. In the > same spirit, I removed the beginning and ending script- and > tip-generated stuff that wasn't relevant. > > I've attached both files. > > The last bit of stuff in the "hang" case was: > > usb6: USB revision 2.0 > uhub6: on usb6 > uhub6: 6 ports with 6 removable, self powered > pcib2: at device 30.0 on pci0 > pcib2: domain 0 > pcib2: secondary bus 2 > pcib2: subordinate bus 2 > pcib2: I/O decode 0xf000-0xfff > pcib2: no prefetched decode > pcib2: Subtractively decoded bridge. > > > and in the "nohang" case, that bit was followed by: > > pci2: on pcib2 > pci2: domain=0, physical bus=2 Ok. Please apply the patch below and report back which printfs you see. > I note, too, that running diff(1) to compare the 2 files shows that the > "nohang" case is missing some curious lines that show up in the "hang" > case, e.g.: > > ioapic0: routing intpin 22 (PCI IRQ 22) to vector 53 > ehci0: [GIANT-LOCKED] > ehci0: [ITHREAD] > -usb2: waiting for BIOS to give up control > usb2: EHCI version 1.0 > usb2: wrong number of companions (3 != 2) > usb2: companion controllers, 2 ports each: usb0 usb1 > ... > ehci1: Reserved 0x400 bytes for rid 0x10 type 3 at 0xff980800 > ehci1: [GIANT-LOCKED] > ehci1: [ITHREAD] > -usb6: waiting for BIOS to give up control > -usb6: timed out waiting for BIOS > usb6: EHCI version 1.0 > usb6: companion controllers, 2 ports each: usb3 usb4 usb5 > usb6: on ehci1 This is due to the ehci(4) boot time hangs fixed in the last commit to ehci_pci.c. You can ignore it. Index: acpi_pcib.c =================================================================== RCS file: /usr/cvs/src/sys/dev/acpica/acpi_pcib.c,v retrieving revision 1.60 diff -u -r1.60 acpi_pcib.c --- acpi_pcib.c 3 Dec 2005 21:17:17 -0000 1.60 +++ acpi_pcib.c 21 Mar 2008 15:00:34 -0000 @@ -147,6 +147,7 @@ * are several valid bridges in the field that do not have a _PRT, so * only warn about missing tables if bootverbose is set. */ + device_printf(dev, "fetching _PRT\n"); prt->Length = ACPI_ALLOCATE_BUFFER; status = AcpiGetIrqRoutingTable(acpi_get_handle(dev), prt); if (ACPI_FAILURE(status) && (bootverbose || status != AE_NOT_FOUND)) @@ -157,6 +158,7 @@ /* * Attach the PCI bus proper. */ + device_printf(dev, "adding pci bus child device\n"); if ((child = device_add_child(dev, "pci", busno)) == NULL) { device_printf(device_get_parent(dev), "couldn't attach pci bus\n"); return_VALUE(ENXIO); @@ -165,8 +167,10 @@ /* * Now go scan the bus. */ + device_printf(dev, "force attaching PCI link devices found in _PRT\n"); prt_walk_table(prt, prt_attach_devices, dev); + device_printf(dev, "attaching the PCI child bus device\n"); return_VALUE (bus_generic_attach(dev)); } -- John Baldwin