From owner-freebsd-ia64@FreeBSD.ORG Sun Nov 23 09:06:53 2008 Return-Path: Delivered-To: freebsd-ia64@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id CC747106564A for ; Sun, 23 Nov 2008 09:06:53 +0000 (UTC) (envelope-from jayk123@hotmail.com) Received: from col0-omc3-s8.col0.hotmail.com (col0-omc3-s8.col0.hotmail.com [65.55.34.146]) by mx1.freebsd.org (Postfix) with ESMTP id AC5798FC16 for ; Sun, 23 Nov 2008 09:06:53 +0000 (UTC) (envelope-from jayk123@hotmail.com) Received: from COL101-W55 ([65.55.34.137]) by col0-omc3-s8.col0.hotmail.com with Microsoft SMTPSVC(6.0.3790.3959); Sun, 23 Nov 2008 00:54:53 -0800 Message-ID: X-Originating-IP: [71.112.21.165] From: Jay Sender: To: Date: Sun, 23 Nov 2008 08:54:53 +0000 Importance: Normal Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable MIME-Version: 1.0 X-OriginalArrivalTime: 23 Nov 2008 08:54:53.0369 (UTC) FILETIME=[26AE7A90:01C94D49] Subject: freebsd/ia64 reboots early in boot X-BeenThere: freebsd-ia64@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: Porting FreeBSD to the IA-64 List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 23 Nov 2008 09:06:53 -0000 FreeBSD 7.0/ia64 is able to load the kernel and get pretty far into it=2C but reboots the machine before getting to any interactive stuff. This is the "boot only" CD=2C which I thought I might be able to use to ins= tall. I still don't know what it is for. 7.1beta2=2C same thing=2C except no buzzing sound (possibly because I didn't=2C like=2C reset the previous error?) This is an HP Integrity rx2600. One internal 73gig scsi hard drive. One external USB optical drive. Serial console. Linux works on it. (anyone know how to affordably get HP-UX and/or OpenVMS?= ) I updated some (all?) firmware. Could be it doesn't like booting off a USB CD?? The machine doesn't have an internal optical drive. Linux installed ok this way. I'll probably have an internal optical drive soon. Machine bought used/cheap on eBay. =20 =20 serial console output: 7.0: EFI version 1.10 [14.61] EFI64 Running on Intel(R) Itanium Processor Family EFI 1.10 IPF zx6000/rx2600/zx2000 1.22 [Thu Mar 11 14:22:35 2004] - HP Copyright (c) 2000-2002 Broadcom Corporation Broadcom NetXtreme Gigabit Ethernet EFI driver v3.0.7 Loading 'FPSWA'... Loading 'lsi1030'... Loading 'gigundi'... 2 0 0x00020B 0x0000000000000006 EFI Launching Boot Manager Scsi(Pun0=2CLun0) HP 73.4GST373405LC HP04 (160 MBytes/sec) Broadcom NetXtreme Gigabit Ethernet Adapter is detected (PCI) EFI Boot Manager ver 1.10 [14.61] Firmware ver 2.31 [4411] Loading device drivers EFI Boot Manager ver 1.10 [14.61] Firmware ver 2.31 [4411] Please select a boot option Debian GNU/Linux Linux Linux backup EFI Shell [Built-in] Linux Reinstall Boot Option Maintenance Menu System Configuration Menu Use ^ and v to change option(s). Use Enter to select an option EFI Boot Maintenance Manager ver 1.10 [14.61] Main Menu. Select an Operation Boot from a File Add a Boot Option Delete Boot Option(s) Change Boot Order Manage BootNext setting Set Auto Boot TimeOut Select Active Console Output Devices Select Active Console Input Devices Select Active Standard Error Devices Cold Reset Exit Timeout-->[10] sec SystemGuid-->[B02EAEAD-3D76-11D7-9E4B-30864E0D85C8] SerialNumber-->[US25362801 ] EFI Boot Maintenance Manager ver 1.10 [14.61] Boot From a File. Select a Volume NO VOLUME LABEL [Acpi(HWP0002=2C100)/Pci(1|0)/Scsi(Pun0=2CLun0)/HD(P Removable Media Boot [Acpi(HWP0002=2C0)/Pci(1|0)/Usb(1=2C 0)] Load File [EFI Shell [Built-in]] Load File [Acpi(HWP0002=2C0)/Pci(3|0)/Mac(00306E3849D0)] Load File [Acpi(HWP0002=2C100)/Pci(2|0)/Mac(00306E38C9F1)] Exit Device Path Acpi(HWP0002=2C0)/Pci(1|0)/Usb(1=2C 0) Consoles: EFI console Image base: 0x00000040fef72000 FreeBSD/ia64 EFI boot=2C Revision 1.2 (root@pluto1.freebsd.org=2C Sun Feb 24 21:12:16 UTC 2008) Loading /boot/defaults/loader.conf /boot/kernel/kernel data=3D0xb46ac0+0x3f308 syms=3D[0x8+0x7a820+0x8+0x6b072= ] / Hit [Enter] to boot immediately=2C or any other key for command prompt. Booting [/boot/kernel/kernel]... Entering /boot/kernel/kernel at 0xe000000004070000... GDB: debug ports: uart GDB: current port: uart KDB: debugger backends: ddb gdb KDB: current backend: ddb Copyright (c) 1992-2008 The FreeBSD Project. Copyright (c) 1979=2C 1980=2C 1983=2C 1986=2C 1988=2C 1989=2C 1991=2C 1992= =2C 1993=2C 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 7.0-RELEASE #0: Mon Feb 25 07:27:59 UTC 2008 root@pluto1.freebsd.org:/usr/obj/usr/src/sys/GENERIC CPU: Madison (1500.00-Mhz Itanium 2) Origin =3D "GenuineIntel" Revision =3D 5 Features =3D 0x1 real memory =3D 10717020160 (10220 MB) avail memory =3D 9992945664 (9530 MB) FPSWA Revision =3D 0x10012=2C Entry =3D 0xe0000040ffe62050 FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0: SAPIC Id=3D0=2C SAPIC Eid=3D0 (BSP) cpu1: SAPIC Id=3D1=2C SAPIC Eid=3D0 acpi0: on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) acpi0: Sleep Button (fixed) Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 acpi_timer0: iomem 0xff5c1004-0xff5c1007 on acpi0 cpu0: on acpi0 cpu1: on acpi0 acpi_tz0: on acpi0 pcib0: on acpi0 pci0: on pcib0 ohci0: mem 0x80023000-0x80023fff irq 16 at device 1.0 on pci0 ohci0: [GIANT-LOCKED] ohci0: [ITHREAD] usb0: OHCI version 1.0 usb0: on ohci0 usb0: USB revision 1.0 uhub0: on usb0 uhub0: 3 ports with 3 removable=2C self powered ohci1: mem 0x80022000-0x80022fff irq 17 at device 1.1 on pci0 ohci1: [GIANT-LOCKED] ohci1: [ITHREAD] usb1: OHCI version 1.0 usb1: on ohci1 usb1: USB revision 1.0 uhub1: on usb1 uhub1: 2 ports with 2 removable=2C self powered ehci0: mem 0x80021000-0x800210ff irq 18 at d evice 1.2 on pci0 ehci0: [GIANT-LOCKED] ehci0: [ITHREAD] usb2: EHCI version 0.95 usb2: companion controllers=2C 3 ports each: usb0 usb1 usb2: on ehci0 usb2: USB revision 2.0 uhub2: on usb2 uhub2: 5 ports with 5 removable=2C self powered umass0: on uhub2 umass0: Get Max Lun not supported (STALLED) atapci0: port 0xd58-0xd5f=2C0xd64-0xd67=2C0xd50-0xd 57=2C0xd60-0xd63=2C0xd40-0xd4f irq 21 at device 2.0 on pci0 atapci0: [ITHREAD] atapci0: HW has secondary channel disabled ata2: on atapci0 ata2: [ITHREAD] fxp0: port 0xd00-0xd3f mem 0x80020000-0x80020fff=2C 0x80000000-0x8001ffff irq 20 at device 3.0 on pci0 miibus0: on fxp0 inphy0: PHY 1 on miibus0 inphy0: 10baseT=2C 10baseT-FDX=2C 100baseTX=2C 100baseTX-FDX=2C auto fxp0: Ethernet address: 00:30:6e:38:49:d0 fxp0: [ITHREAD] pcib1: on acpi0 pci32: on pcib1 mpt0: port 0x2100-0x21ff mem 0x90840000-0x9084fff f=2C0x90830000-0x9083ffff irq 27 at device 1.0 on pci32 mpt0: [ITHREAD] mpt0: MPI Version=3D1.2.12.0 mpt1: port 0x2000-0x20ff mem 0x90820000-0x9082fff f=2C0x90810000-0x9081ffff irq 28 at device 1.1 on pci32 mpt1: [ITHREAD] mpt1: MPI Version=3D1.2.12.0 bge0: mem 0x90 800000-0x9080ffff irq 29 at device 2.0 on pci32 miibus1: on bge0 brgphy0: PHY 1 on miibus1 brgphy0: 10baseT=2C 10baseT-FDX=2C 100baseTX=2C 100baseTX-FDX=2C 1000baseT= =2C 1000baseT-F DX=2C auto bge0: Ethernet address: 00:30:6e:38:c9:f1 bge0: [ITHREAD] pcib2: on acpi0 pci64: on pcib2 pcib3: on acpi0 pci96: on pcib3 pcib4: on acpi0 pci128: on pcib4 pci128: at device 1.0 (no driver attached) pcib5: on acpi0 pci192: on pcib5 uart0: iomem 0xff5e0000-0xff5e0007 irq 34 on acpi0 uart0: [FILTER] uart0: console (9600=2Cn=2C8=2C1) uart1: iomem 0xff5e2000-0xff5e2007 irq 35 on acpi0 uart1: [FILTER] uart1: debug port (9600=2Cn=2C8=2C1) ukbd0: on uhub1 Timecounters tick every 1.000 msec Waiting 5 seconds for SCSI devices to settle md0: Preloaded image 8388608 bytes at 0xe000000004c6b670 da0 at mpt0 bus 0 target 0 lun 0 da0: Fixed Direct Access SCSI-2 device da0: 160.000MB/s transfers (80.000MHz=2C offset 63=2C 16bit) da0: Command Queueing Enabled da0: 70007MB (143374738 512 byte sectors: 255H 63S/T 8924C) cd0 at umass-sim0 bus 0 target 0 lun 0 cd0: Removable CD-ROM SCSI-0 device cd0: 40.000MB/s transfers cd0: cd present [31401 x 2048 byte records] =20 pause..then some buzzing sounds..then it reboots =20 1 0 0x0000A4 0x0000000000000000 start memory discovery 1 0 0x000081 0x0000000000000000 start I/O discovery *********************************************************** * ROM Version : 02.31 * ROM Date : 03/11/2004 * BMC Version : 01.53 *********************************************************** =20 7.1=2C skipping the EFI part: Device Path Acpi(HWP0002=2C0)/Pci(1|0)/Usb(1=2C 0) Consoles: EFI console Image base: 0x00000040fef72000 FreeBSD/ia64 EFI boot=2C Revision 1.2 (root@pluto1.freebsd.org=2C Mon Oct 13 06:37:13 UTC 2008) Loading /boot/defaults/loader.conf /boot/kernel/kernel data=3D0xbc7530+0x41d58 syms=3D[0x8+0x80bc8+0x8+0x707ac= ] / Hit [Enter] to boot immediately=2C or any other key for command prompt. Booting [/boot/kernel/kernel]... Entering /boot/kernel/kernel at 0xe000000004078000... GDB: debug ports: uart GDB: current port: uart KDB: debugger backends: ddb gdb KDB: current backend: ddb Copyright (c) 1992-2008 The FreeBSD Project. Copyright (c) 1979=2C 1980=2C 1983=2C 1986=2C 1988=2C 1989=2C 1991=2C 1992= =2C 1993=2C 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 7.1-BETA2 #0: Mon Oct 13 16:01:01 UTC 2008 root@pluto1.freebsd.org:/usr/obj/usr/src/sys/GENERIC CPU: Madison (1500.00-Mhz Itanium 2) Origin =3D "GenuineIntel" Revision =3D 5 Features =3D 0x1 real memory =3D 10717003776 (10220 MB) avail memory =3D 9992929280 (9530 MB) FPSWA Revision =3D 0x10012=2C Entry =3D 0xe0000040ffe62050 FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0: SAPIC Id=3D0=2C SAPIC Eid=3D0 (BSP) cpu1: SAPIC Id=3D1=2C SAPIC Eid=3D0 acpi0: on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) acpi0: Sleep Button (fixed) Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 acpi_timer0: iomem 0xff5c1004-0xff5c1007 on acpi0 acpi_tz0: on acpi0 pcib0: on acpi0 pci0: on pcib0 ohci0: mem 0x80023000-0x80023fff irq 16 at device 1.0 on pci0 ohci0: [GIANT-LOCKED] ohci0: [ITHREAD] usb0: OHCI version 1.0 usb0: on ohci0 usb0: USB revision 1.0 uhub0: on usb0 uhub0: 3 ports with 3 removable=2C self powered ohci1: mem 0x80022000-0x80022fff irq 17 at device 1.1 on pci0 ohci1: [GIANT-LOCKED] ohci1: [ITHREAD] usb1: OHCI version 1.0 usb1: on ohci1 usb1: USB revision 1.0 uhub1: on usb1 uhub1: 2 ports with 2 removable=2C self powered ehci0: mem 0x80021000-0x800210ff irq 18 at d evice 1.2 on pci0 ehci0: [GIANT-LOCKED] ehci0: [ITHREAD] usb2: EHCI version 0.95 usb2: companion controllers=2C 3 ports each: usb0 usb1 usb2: on ehci0 usb2: USB revision 2.0 uhub2: on usb2 uhub2: 5 ports with 5 removable=2C self powered umass0: on uhub2 umass0: Get Max Lun not supported (STALLED) atapci0: port 0xd58-0xd5f=2C0xd64-0xd67=2C0xd50-0xd 57=2C0xd60-0xd63=2C0xd40-0xd4f irq 21 at device 2.0 on pci0 atapci0: [ITHREAD] atapci0: HW has secondary channel disabled ata2: on atapci0 ata2: [ITHREAD] fxp0: port 0xd00-0xd3f mem 0x80020000-0x80020fff=2C 0x80000000-0x8001ffff irq 20 at device 3.0 on pci0 miibus0: on fxp0 inphy0: PHY 1 on miibus0 inphy0: 10baseT=2C 10baseT-FDX=2C 100baseTX=2C 100baseTX-FDX=2C auto fxp0: Ethernet address: 00:30:6e:38:49:d0 fxp0: [ITHREAD] pcib1: on acpi0 pci32: on pcib1 mpt0: port 0x2100-0x21ff mem 0x90840000-0x9084fff f=2C0x90830000-0x9083ffff irq 27 at device 1.0 on pci32 mpt0: [ITHREAD] mpt0: MPI Version=3D1.2.12.0 mpt1: port 0x2000-0x20ff mem 0x90820000-0x9082fff f=2C0x90810000-0x9081ffff irq 28 at device 1.1 on pci32 mpt1: [ITHREAD] mpt1: MPI Version=3D1.2.12.0 bge0: mem 0x90 800000-0x9080ffff irq 29 at device 2.0 on pci32 miibus1: on bge0 brgphy0: PHY 1 on miibus1 brgphy0: 10baseT=2C 10baseT-FDX=2C 100baseTX=2C 100baseTX-FDX=2C 1000baseT= =2C 1000baseT-F DX=2C auto bge0: Ethernet address: 00:30:6e:38:c9:f1 bge0: [ITHREAD] pcib2: on acpi0 pci64: on pcib2 pcib3: on acpi0 pci96: on pcib3 pcib4: on acpi0 pci128: on pcib4 pci128: at device 1.0 (no driver attached) pcib5: on acpi0 pci192: on pcib5 uart0: iomem 0xff5e0000-0xff5e0007 irq 34 on acpi0 uart0: [FILTER] uart0: console (9600=2Cn=2C8=2C1) uart1: iomem 0xff5e2000-0xff5e2007 irq 35 on acpi0 uart1: [FILTER] uart1: debug port (9600=2Cn=2C8=2C1) cpu0: on acpi0 cpu1: on acpi0 ukbd0: on uhub1 Timecounters tick every 1.000 msec Waiting 5 seconds for SCSI devices to settle md0: Preloaded image 8388608 bytes at 0xe000000004cfa610 da0 at mpt0 bus 0 target 0 lun 0 da0: Fixed Direct Access SCSI-2 device da0: 160.000MB/s transfers (80.000MHz=2C offset 63=2C 16bit) da0: Command Queueing Enabled da0: 70007MB (143374738 512 byte sectors: 255H 63S/T 8924C) cd0 at umass-sim0 bus 0 target 0 lun 0 cd0: Removable CD-ROM SCSI-0 device cd0: 40.000MB/s transfers cd0: cd present [34892 x 2048 byte records] =20 pause again=2C and reboot.. 1 0 0x0000A4 0x0000000000000000 start memory discovery 1 0 0x000081 0x0000000000000000 start I/O discovery *********************************************************** * ROM Version : 02.31 * ROM Date : 03/11/2004 * BMC Version : 01.53 *********************************************************** 1 0 0x0000A4 0x0000000000000000 start memory discovery 1 0 0x0000A4 0x0000000000000000 start memory discovery =20 - Jay=