From owner-freebsd-mobile Sun Nov 15 05:26:48 1998 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id FAA25607 for freebsd-mobile-outgoing; Sun, 15 Nov 1998 05:26:48 -0800 (PST) (envelope-from owner-freebsd-mobile@FreeBSD.ORG) Received: from p1.f434.n5020.z2.fidonet.org (gw2.mtelecom.ru [195.90.159.22]) by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id FAA25598 for ; Sun, 15 Nov 1998 05:26:40 -0800 (PST) (envelope-from s@gw2.mtelecom.ru) Received: from gw2.mtelecom.ru (localhost.mtelecom.ru [127.0.0.1]) by p1.f434.n5020.z2.fidonet.org (8.9.1/8.9.1) with ESMTP id QAA08804 for ; Sun, 15 Nov 1998 16:25:47 +0300 (MSK) (envelope-from s@gw2.mtelecom.ru) Message-ID: <364ED655.510371A9@gw2.mtelecom.ru> Date: Sun, 15 Nov 1998 16:25:41 +0300 From: Vsevolod Semenov X-Mailer: Mozilla 4.07 [en] (X11; I; FreeBSD 3.0-RELEASE i386) MIME-Version: 1.0 To: freebsd-mobile@FreeBSD.ORG Subject: (no subject) Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org I want use my pcmcia ethernet and modem card on my notebook . vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv Probing for devices on PCI bus 0: chip0: rev 0xb0 on pci0.0.0 vga0: rev 0x00 o n pci0.17.0 chip1: rev 0xa3 on pci0.18.0 ide_pci0: rev 0xa2 on pci0.18.1 pcic0: rev 0xe2 int a irq 255 on p ci0.23.0 Probing for devices on the ISA bus: [...] Initializing PC-card drivers: ed sio bash# pccardd Nov 15 16:19:36 p1 pccardd[8787]: fatal error: no PC-CARD slots bash#uname -a FreeBSD p1.f434.n5020.z2.fidonet.org 3.0-RELEASE FreeBSD 3.0-RELEASE #1: Sat Nov 14 16:01:37 MSK 1998 root@p1.f434.n5020.z2.fidonet.org:/usr/src/sys/compile/S i386 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Sun Nov 15 07:29:50 1998 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id HAA03943 for freebsd-mobile-outgoing; Sun, 15 Nov 1998 07:29:50 -0800 (PST) (envelope-from owner-freebsd-mobile@FreeBSD.ORG) Received: from fleming.cs.strath.ac.uk (fleming.cs.strath.ac.uk [130.159.196.126]) by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id HAA03934 for ; Sun, 15 Nov 1998 07:29:45 -0800 (PST) (envelope-from roger@cs.strath.ac.uk) Received: from muir-10 (roger@muir-10.cs.strath.ac.uk [130.159.148.10]) by fleming.cs.strath.ac.uk (8.8.8/8.8.8) with SMTP id PAA05429 Sun, 15 Nov 1998 15:29:13 GMT Message-ID: <364EF34C.446B@cs.strath.ac.uk> Date: Sun, 15 Nov 1998 15:29:16 +0000 From: Roger Hardiman Organization: University of Strathclyde X-Mailer: Mozilla 3.04Gold (X11; I; OSF1 V4.0 alpha) MIME-Version: 1.0 To: mobile@FreeBSD.ORG Subject: strange behavious of two PCMCIA modem cards Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Hi, I've got some strange results when hard coding IRQs for my PCMCIA cards. I have two PCMCIA modem cards, both the same make and they emulate a standard serial port. I tried Hard Coding the IRQs in pccard.conf, card "Nokia Mobile Phones" "DTP-2 ver II" config 0x20 "sio2" 10 config 0x20 "sio3" 11 and I compiled the kernel with SIO2 set to IRQ10 and SIO3 to IRQ11. This worked on 2.2.5+PAO but on 3.0-RELEASE, sio2 worked fine and sio3 worked but was "really slow" (like the IRQ was wrong). Changing to card "Nokia Mobile Phones" "DTP-2 ver II" config 0x20 "sio2" ? config 0x20 "sio3" ? and allowing the pccard software in 3.0-R to tell the sio driver the 'actual irqs' fixed everything. My question then is, why can I not hard code the IRQ. Bye Roger -- Roger Hardiman | Telepresence Research Group roger@cs.strath.ac.uk | DMEM, University of Strathclyde tel: 0141 548 2897 | Glasgow, Scotland, G1 1XJ, UK fax: 0141 552 0557 | http://telepresence.dmem.strath.ac.uk To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Sun Nov 15 08:28:42 1998 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id IAA09963 for freebsd-mobile-outgoing; Sun, 15 Nov 1998 08:28:42 -0800 (PST) (envelope-from owner-freebsd-mobile@FreeBSD.ORG) Received: from valis.goatsucker.org (dialup-port1.dcs.qmw.ac.uk [138.37.88.231]) by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id IAA09942 for ; Sun, 15 Nov 1998 08:28:28 -0800 (PST) (envelope-from rsm@acm.org) Received: (from scott@localhost) by valis.goatsucker.org (8.8.8/8.8.7) id QAA01707; Sun, 15 Nov 1998 16:26:20 GMT (envelope-from scott) Message-ID: <19981115162619.63931@goatsucker.org> Date: Sun, 15 Nov 1998 16:26:19 +0000 From: Scott Mitchell To: freebsd-mobile@FreeBSD.ORG Subject: APM on ThinkPad 380? Mime-Version: 1.0 Content-Type: multipart/mixed; boundary=GYHOYXEY6WxJCY8h X-Mailer: Mutt 0.89i X-Operating-System: FreeBSD 2.2.6-RELEASE i386 Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org --GYHOYXEY6WxJCY8h Content-Type: text/plain; charset=us-ascii Just wondering if anyone has managed to get suspend/resume (with or without PAO) working on any IBM ThinkPad 380 series machine? On my 380D, - apm -z doesn't suspend, but locks the machine. - suspend through hotkeys or closing the lid works, but the machine locks on resume. Shutdown -x works just fine, as does the PCCARD stuff. I get the same behaviour with and without PAO, with and without PC cards in the slots. I've tried knocking it back to APM1.0 mode -- no luck. Avoiding conflicts with the built in sound card (from the FAQ) -- no luck. Running with APM_DEBUG turned on didn't reveal anything that jumped out at me and said 'this is broken'. This is all under 2.2.7R, with PAO-980913. Everything works fine under Win95 and DOS. The 380 is a bit weird in that there is no access to the APM settings from the BIOS setup -- it's all done through a DOS utility or the Win95 power management panel. Any clues? Or am I SOL here? I've attached my kernel config and dmesg output in case these are of any use. TIA, Scott -- =========================================================================== Scott Mitchell | PGP Key ID |"If I can't have my coffee, I'm just | 0x54B171B9 | like a dried up piece of roast goat" QMW College, London, UK | 0xAA775B8B | -- J. S. Bach. --GYHOYXEY6WxJCY8h Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="dmesg.boot" Copyright (c) 1992-1998 FreeBSD Inc. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 2.2.7-RELEASE #0: Sun Nov 15 15:39:31 GMT 1998 root@orac.dcs.qmw.ac.uk:/usr/src/sys/compile/ORAC CPU: Pentium/P54C (152.13-MHz 586-class CPU) Origin = "GenuineIntel" Id = 0x52c Stepping=12 Features=0x1bf real memory = 33554432 (32768K bytes) avail memory = 30556160 (29840K bytes) Initializing PC-card drivers: sio wdc Probing for devices on PCI bus 0: chip0 rev 2 class 60000 on pci0:0:0 chip1 rev 3 class 68000 on pci0:1:0 vga0 rev 2 class 30000 int a irq 11 on pci0:3:0 pcic0 rev 7 class 60500 int a irq ?? on pci0:19:0 Probing for PnP devices: No Plug-n-Play devices were found Probing for devices on the ISA bus: sc0 at 0x60-0x6f irq 1 on motherboard sc0: VGA color <16 virtual consoles, flags=0x0> Add hook "system keyboard" sio0 at 0x3f8-0x3ff irq 4 on isa sio0: type 16550A sio1 at 0x2f8-0x2ff irq 3 on isa sio1: type 16550A lpt0 at 0x3bc-0x3c3 irq 7 on isa lpt0: Interrupt-driven port lp0: TCP/IP capable interface psm0 at 0x60-0x64 irq 12 on motherboard psm0: model Generic PS/2 mouse, device ID 0 pcm0 at 0x530 irq 5 drq 1 flags 0xa610 on isa mss_attach 0 at 0x530 irq 5 dma 1:0 flags 0xa610 fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa fdc0: FIFO enabled, 8 bytes threshold fd0: 1.44MB 3.5in wdc0 at 0x1f0-0x1f7 irq 14 flags 0x80ff80ff on isa wdc0: unit 0 (wd0): , 32-bit, multi-block-16 wd0: 1376MB (2818368 sectors), 2796 cyls, 16 heads, 63 S/T, 512 B/S wdc0: unit 1 (atapi): , removable, accel, ovlap, dma, iordis wcd0: 1377Kb/sec, 128Kb cache, audio play, 16 volume levels, ejectable tray wcd0: door open, unlocked pcic0 at 0x3e0-0x3e1 irq 11 on isa PC-Card ctlr(0) Cirrus Logic PD-6729/6730 [i82365 compatible mode] (5 mem & 2 I/O windows) Add hook "Cirrus Logic PD-6729/6730 [i82365 compatible mode]" Add hook "Cirrus Logic PD-6729/6730 [i82365 compatible mode]" pcic0: slot 0 controller I/O address 0x3e0 Add hook "Cirrus Logic PD-6729/6730 [i82365 compatible mode]" Add hook "Cirrus Logic PD-6729/6730 [i82365 compatible mode]" pcic0: slot 1 controller I/O address 0x3e0 npx0 flags 0x1 on motherboard npx0: INT 16 interface apm0 on isa apm: APM BIOS version 0102 apm: Code32 0xf00f75e0, Code16 0xf00f0000, Data 0xf009fc00 apm: Code entry 0x00000000, Idling CPU disabled, Management enabled apm: CS_limit=0xffff, DS_limit=0x400 apm: Engaged control enabled apm: found APM BIOS version 1.1 apm: Slow Idling CPU disabled Add hook "default suspend" Add hook "default resume" called apm_event_enable() Intel Pentium F00F detected, installing workaround WARNING: / was not properly dismounted. Card inserted, slot 1 --GYHOYXEY6WxJCY8h Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename=ORAC # # Kernel config for orac, with PAO extensions # machine "i386" cpu "I586_CPU" ident ORAC maxusers 10 options INET #InterNETworking options FFS #Berkeley Fast Filesystem options NFS #Network Filesystem options "COMPAT_43" #Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=15 #Be pessimistic about Joe SCSI device options BOUNCE_BUFFERS #include support for DMA bounce buffers options UCONSOLE #Allow users to grab the console options FAILSAFE #Be conservative options USERCONFIG #boot -c editor options VISUAL_USERCONFIG #visual boot -c editor # If your laptop have not had Windoze95-Ready BIOS, please update it. # Such old BIOS'es sometimes have critical bugs at 32-bit protected # mode APM BIOS interface (which have not used by Windoze 3.1). # PC-card suspend/resume support (experimental) options APM_PCCARD_RESUME options PCIC_RESUME_RESET # Keep power for serial cards when the system suspends # (If your machine hangs up when you try to suspend the system with # FAX/Modem PCMCIA card, uncomment this option). #options SIO_SUSP_KEEP_PWR # Detach SCSI devices when the SCSI card is removed options SCSI_DETACH # Detach ATAPI devices when the ATA card is removed options ATAPI_DETACH # Japanese version of WaveLAN PCMCIA uses 2.4GHz band instead of 915MHz # band that US version uses. If you want to use Japanese version of # WaveLAN, uncomment this line, or edit the corresponding config entry # of /etc/pccard.conf. #options "WAVELAN_PCMCIA_24" # Suspend the system when the battery status is "Low" #options "APM_BATT_LOW_SUSPEND" # If you want to use NTP on laptop machines, uncomment the following # option. Current APM implementation affects NTP client. #options "APM_NO_CLOCK_ADJUST" # Some X-servers cannot survive suspend/resume on laptop. # This option kicks her when the system is resumed from suspended mode. #options SYSCONS_VTY_RESUME config kernel root on wd0 controller isa0 controller pci0 controller pnp0 # Dont remove these two lines! pseudo-device card 1 # You must use "flags 0x1" when you don't hear any negotiation noise(?) # if you use modem card, or pccardd doesn't read cis tuple, tell you # 'No card in database for"(null)"("(null)")' in case of Cirrus Logic's # pcic is your PC. #device pcic0 at isa? port 0x3e0 flags 0x1 irq 11 vector pcicintr device pcic0 at isa? port 0x3e0 irq 11 vector pcicintr #device pcic0 at isa? port 0x3e4 irq 11 vector pcicintr controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 vector fdintr disk fd0 at fdc0 drive 0 options "CMD640" # work around CMD640 chip deficiency controller wdc0 at isa? port "IO_WD1" bio irq 14 flags 0x80ff80ff vector wdintr disk wd0 at wdc0 drive 0 options ATAPI #Enable ATAPI support for IDE bus options ATAPI_STATIC #Don't do it as an LKM device wcd0 #IDE CD-ROM # syscons is the default console driver, resembling an SCO console device sc0 at isa? port "IO_KBD" tty irq 1 vector scintr # If the screen flickers badly when the mouse pointer is moved, try this. #options SC_BAD_FLICKER # Mandatory, don't remove device npx0 at isa? port "IO_NPX" flags 0x1 irq 13 vector npxintr # Laptop support (see LINT for more options) device apm0 at isa? # Advanced Power Management #options APM_BROKEN_STATCLOCK # Workaround some buggy APM BIOS device sio0 at isa? port "IO_COM1" tty irq 4 vector siointr device sio1 at isa? port "IO_COM2" tty irq 3 vector siointr device lpt0 at isa? port? tty irq 7 vector lptintr device psm0 at isa? port "IO_KBD" conflicts tty irq 12 vector psmintr # Controls all "VOXWARE" driver sound devices. See Luigi's driver # below for an alternate which may work better for some cards. # #controller snd0 #device sb0 at isa? port 0x220 irq 5 drq 1 vector sbintr #device sbxvi0 at isa? drq 0 #device sbmidi0 at isa? port 0x330 #device mss0 at isa? port 0x530 irq 10 drq 1 vector adintr #device opl0 at isa? port 0x388 # Luigi's snd code (use INSTEAD of snd0 and all VOXWARE drivers!). # You may also wish to enable the pnp controller with this, for pnp # sound cards. # device pcm0 at isa? port ? tty irq 5 drq 1 flags 0x10 vector pcmintr pseudo-device loop pseudo-device ether pseudo-device log pseudo-device gzip pseudo-device sl 1 pseudo-device ppp 1 pseudo-device vn 1 pseudo-device tun 1 pseudo-device bpfilter 4 pseudo-device pty 16 options DDB options DDB_UNATTENDED options KTRACE options SYSVSHM options SYSVSEM options SYSVMSG --GYHOYXEY6WxJCY8h-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Sun Nov 15 12:13:30 1998 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id MAA27860 for freebsd-mobile-outgoing; Sun, 15 Nov 1998 12:13:30 -0800 (PST) (envelope-from owner-freebsd-mobile@FreeBSD.ORG) Received: from thyme.cisco.com (thyme.cisco.com [171.69.43.12]) by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id MAA27855 for ; Sun, 15 Nov 1998 12:13:28 -0800 (PST) (envelope-from shibumi@cisco.com) Received: from cisco.com (localhost [127.0.0.1]) by thyme.cisco.com (8.8.5-Cisco.1/8.6.5) with ESMTP id MAA06217 for ; Sun, 15 Nov 1998 12:13:05 -0800 (PST) Message-Id: <199811152013.MAA06217@thyme.cisco.com> To: freebsd-mobile@FreeBSD.ORG Subject: Re: APM on ThinkPad 380? In-reply-to: Your message of "Sun, 15 Nov 1998 16:26:19 GMT." <19981115162619.63931@goatsucker.org> Reply-to: shibumi@cisco.com X-Disclaimer: Unless otherwise noted below, this is not a policy statement Date: Sun, 15 Nov 1998 12:13:05 -0800 From: "Kenton A. Hoover" Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org You're SOL. Its something caused by the Windows 98 compatable BIOSes for the ThinkPads. You might try going to the IBM FTP site and discover if you can get a backrev BIOS that doesn't have this problem. However, the later 560X, 600 and 600E all have this problem. The only lead I have found so far is that the kernel APM driver never sees a SUSPEND event coming from the BIOS when the key sequence is hit. I've been trying to get some more information on this out of IBM. > --GYHOYXEY6WxJCY8h > Content-Type: text/plain; charset=us-ascii > > Just wondering if anyone has managed to get suspend/resume (with or without > PAO) working on any IBM ThinkPad 380 series machine? On my 380D, > > - apm -z doesn't suspend, but locks the machine. > - suspend through hotkeys or closing the lid works, but the machine locks > on resume. > > Shutdown -x works just fine, as does the PCCARD stuff. I get the same > behaviour with and without PAO, with and without PC cards in the slots. > I've tried knocking it back to APM1.0 mode -- no luck. Avoiding conflicts > with the built in sound card (from the FAQ) -- no luck. Running with > APM_DEBUG turned on didn't reveal anything that jumped out at me and said > 'this is broken'. This is all under 2.2.7R, with PAO-980913. > > Everything works fine under Win95 and DOS. The 380 is a bit weird in that > there is no access to the APM settings from the BIOS setup -- it's all done > through a DOS utility or the Win95 power management panel. > > Any clues? Or am I SOL here? I've attached my kernel config and dmesg > output in case these are of any use. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Sun Nov 15 18:08:56 1998 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id SAA01905 for freebsd-mobile-outgoing; Sun, 15 Nov 1998 18:08:56 -0800 (PST) (envelope-from owner-freebsd-mobile@FreeBSD.ORG) Received: from ns1.adsu.bellsouth.com (ns1.adsu.bellsouth.com [205.152.173.2]) by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id SAA01900 for ; Sun, 15 Nov 1998 18:08:55 -0800 (PST) (envelope-from ck@ns1.adsu.bellsouth.com) Received: (from ck@localhost) by ns1.adsu.bellsouth.com (8.9.1a/8.9.1) id VAA05590 for mobile@freebsd.org; Sun, 15 Nov 1998 21:08:31 -0500 (EST) Message-ID: <19981115210831.A5535@ns1.adsu.bellsouth.com> Date: Sun, 15 Nov 1998 21:08:31 -0500 From: Christian Kuhtz To: mobile@FreeBSD.ORG Subject: Dell Latitude CPi Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 0.93.2i Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Hello: Anyone out there who also has a Dell Latitude CPi 266XD notebook and would like to share configuration experiences? If so, please contact me at ck@adsu.bellsouth.com. I will summarize. Thanks, Chris To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Sun Nov 15 19:01:36 1998 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id TAA06297 for freebsd-mobile-outgoing; Sun, 15 Nov 1998 19:01:36 -0800 (PST) (envelope-from owner-freebsd-mobile@FreeBSD.ORG) Received: from shell6.ba.best.com (shell6.ba.best.com [206.184.139.137]) by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id TAA06287 for ; Sun, 15 Nov 1998 19:01:33 -0800 (PST) (envelope-from jkb@shell6.ba.best.com) Received: (from jkb@localhost) by shell6.ba.best.com (8.9.0/8.9.0/best.sh) id TAA13490; Sun, 15 Nov 1998 19:00:54 -0800 (PST) Message-ID: <19981115190052.A13206@best.com> Date: Sun, 15 Nov 1998 19:00:53 -0800 From: "Jan B. Koum " To: Christian Kuhtz , mobile@FreeBSD.ORG Subject: Re: Dell Latitude CPi References: <19981115210831.A5535@ns1.adsu.bellsouth.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 0.93.2i In-Reply-To: <19981115210831.A5535@ns1.adsu.bellsouth.com>; from Christian Kuhtz on Sun, Nov 15, 1998 at 09:08:31PM -0500 Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org On Sun, Nov 15, 1998 at 09:08:31PM -0500, Christian Kuhtz wrote: > > Hello: > > Anyone out there who also has a Dell Latitude CPi 266XD notebook and would > like to share configuration experiences? If so, please contact me at > ck@adsu.bellsouth.com. I will summarize. > > Thanks, > Chris > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-mobile" in the body of the message I had Dell Latitude CP 166MHz for more then half a year and it worked just fine with FreeBSD. See www.best.com/~jkb/laptop/ for sample config files I have left over. -- Yan I don't have the password .... + Jan Koum But the path is chainlinked .. | Spelled Jan, pronounced Yan. There. So if you've got the time .... | Web: http://www.best.com/~jkb Set the tone to sync ......... + OS: http://www.FreeBSD.org To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Mon Nov 16 22:43:07 1998 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id WAA25775 for freebsd-mobile-outgoing; Mon, 16 Nov 1998 22:43:07 -0800 (PST) (envelope-from owner-freebsd-mobile@FreeBSD.ORG) Received: from lab12.ie.pitt.edu (lab12.ie.pitt.edu [136.142.89.102]) by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id WAA25757; Mon, 16 Nov 1998 22:43:04 -0800 (PST) (envelope-from grafe@lab12.ie.pitt.edu) Received: (from grafe@localhost) by lab12.ie.pitt.edu (8.8.8+Sun/8.8.8) id BAA07450; Tue, 17 Nov 1998 01:42:36 -0500 (EST) Date: Tue, 17 Nov 1998 01:42:36 -0500 (EST) Message-Id: <199811170642.BAA07450@lab12.ie.pitt.edu> From: grafe@lab12.ie.pitt.edu (G. Rafe) To: freebsd-mobile@FreeBSD.ORG, freebsd-questions@FreeBSD.ORG Subject: Q: Why Constant/Regular Disk Activity? Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org I recently upgraded my older Toshiba 220CDS (64MB RAM) to 2.2.7-RELEASE and installed the same O/S on a new Toshiba 330CDS (32MB RAM). Except for a few hardware differences, they are configured identically [to the extent that I can tell]. My question has to do with a very regular and constant disk activity I'm seeing on the newer 330CDS, which prevents the disk from spinning down after some period of inactivity. The older 220CDS behaves normally [i.e., the disk spins down after a bit]; the disk on this 330CDS, however, gets hit by some process every 30 seconds [exactly]. Apart from the fact that it prevents the disk from spinning down normally, the constant disk access is plain annoying when I know there shouldn't be any. The report of "ps ax" on the 330CDS follows: PID TT STAT TIME COMMAND 0 ?? DLs 0:00.02 (swapper) 1 ?? Is 0:00.04 /sbin/init -- 2 ?? DL 0:00.00 (pagedaemon) 3 ?? DL 0:00.00 (vmdaemon) 4 ?? DL 0:01.10 (update) 26 ?? Is 0:00.00 adjkerntz -i 38 ?? Is 0:00.05 pccardd 76 ?? Ss 0:00.14 syslogd 86 ?? Is 0:00.00 portmap 157 v0 Is+ 0:00.41 -sh (sh) 492 v1 Is+ 0:00.02 /usr/libexec/getty Pc ttyv1 1178 v0 R+ 0:00.00 ps -ax Running "top -s1" doesn't report anything obvious. Any pointers on tracking down this mysterious disk toucher will be appreciated greatly. Gary Rafe University of Pittsburgh gerst4@pitt.edu To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Tue Nov 17 01:19:47 1998 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id BAA13486 for freebsd-mobile-outgoing; Tue, 17 Nov 1998 01:19:47 -0800 (PST) (envelope-from owner-freebsd-mobile@FreeBSD.ORG) Received: from caladan.tdx.co.uk (caladan.tdx.co.uk [195.188.177.4]) by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id BAA13481 for ; Tue, 17 Nov 1998 01:19:44 -0800 (PST) (envelope-from kpielorz@tdx.co.uk) Received: from tdx.co.uk (lorca-tx.tdx.co.uk [195.188.177.242]) by caladan.tdx.co.uk (8.9.1a/8.9.1) with ESMTP id JAA07326; Tue, 17 Nov 1998 09:19:15 GMT Message-ID: <36513F92.DD7C7908@tdx.co.uk> Date: Tue, 17 Nov 1998 09:19:14 +0000 From: Karl Pielorz Organization: TDX - The Digital eXchange X-Mailer: Mozilla 4.5 [en] (WinNT; I) X-Accept-Language: en MIME-Version: 1.0 To: "G. Rafe" CC: freebsd-mobile@FreeBSD.ORG Subject: Re: Q: Why Constant/Regular Disk Activity? References: <199811170642.BAA07450@lab12.ie.pitt.edu> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org "G. Rafe" wrote: > My question has to do with a very regular and constant disk activity > I'm seeing on the newer 330CDS, which prevents the disk from spinning down > after some period of inactivity. > The older 220CDS behaves normally [i.e., the disk spins down after a bit]; > the disk on this 330CDS, however, gets hit by some process every 30 seconds > [exactly]. There is a FreeBSD system process that sync's the disk every 30 seconds... I've always found due to the level of logging + other activity on FreeBSD that spinning drives down on laptops is currently a bad idea... Also on the two machines I've tried it on - only one of them would survive the impending interrupt timeouts etc. that get generated when FreeBSD wants the disk again in a hurry... And even then it wasn't a 100% sure bet the machine would survive... FreeBSD likes to swap things out to disk as well - this doesn't help either... In short I don't think you'll be able to do a lot with it... On my current laptop I disable the drive spinning down and it works fine. From general usage I would say it probably wastes about 10-20% of the battery, which for me isn't too high a price to pay... Regards, Karl To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Tue Nov 17 01:28:45 1998 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id BAA14375 for freebsd-mobile-outgoing; Tue, 17 Nov 1998 01:28:45 -0800 (PST) (envelope-from owner-freebsd-mobile@FreeBSD.ORG) Received: from hotpoint.dcs.qmw.ac.uk (hotpoint.dcs.qmw.ac.uk [138.37.88.162]) by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id BAA14351 for ; Tue, 17 Nov 1998 01:28:38 -0800 (PST) (envelope-from scott@dcs.qmw.ac.uk) Received: from brunos-sun.dcs.qmw.ac.uk [138.37.88.185]; by hotpoint.dcs.qmw.ac.uk (8.8.7/8.8.5/S-4.0) with SMTP; id JAA22809; Tue, 17 Nov 1998 09:27:59 GMT Received: locally by brunos-sun (SMI-8.6/QMW-client-3.2b); poster "scott"; id JAA12299; Tue, 17 Nov 1998 09:27:04 GMT Message-ID: <19981117092704.J20936@dcs.qmw.ac.uk> Date: Tue, 17 Nov 1998 09:27:04 +0000 From: Scott Mitchell To: shibumi@cisco.com, freebsd-mobile@FreeBSD.ORG Subject: Re: APM on ThinkPad 380? References: <19981115162619.63931@goatsucker.org> <199811152013.MAA06217@thyme.cisco.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 0.93.2i In-Reply-To: <199811152013.MAA06217@thyme.cisco.com>; from Kenton A. Hoover on Sun, Nov 15, 1998 at 12:13:05PM -0800 Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org On Sun, Nov 15, 1998 at 12:13:05PM -0800, Kenton A. Hoover wrote: > You're SOL. Its something caused by the Windows 98 compatable BIOSes > for the ThinkPads. You might try going to the IBM FTP site and discover if > you can get a backrev BIOS that doesn't have this problem. However, the > later 560X, 600 and 600E all have this problem. > > The only lead I have found so far is that the kernel APM driver never sees > a SUSPEND event coming from the BIOS when the key sequence is hit. I've > been trying to get some more information on this out of IBM. > Some further investigation revealed that the ThinkPad (claims to) have a 1.2 APM BIOS. That should of course be back compatible with the 1.1 driver in FreeBSD, but you never know. I guess there are lots of IBM extension in the APM BIOS that they don't want to tell us about.... If I'm feeling brave/desparate I might try your suggestion of downgrading the BIOS. Could you let me know if you manage to get anything useful out of IBM? Many thanks, Scott. > > --GYHOYXEY6WxJCY8h > > Content-Type: text/plain; charset=us-ascii > > > > Just wondering if anyone has managed to get suspend/resume (with or without > > PAO) working on any IBM ThinkPad 380 series machine? On my 380D, > > > > - apm -z doesn't suspend, but locks the machine. > > - suspend through hotkeys or closing the lid works, but the machine locks > > on resume. > > > > Shutdown -x works just fine, as does the PCCARD stuff. I get the same > > behaviour with and without PAO, with and without PC cards in the slots. > > I've tried knocking it back to APM1.0 mode -- no luck. Avoiding conflicts > > with the built in sound card (from the FAQ) -- no luck. Running with > > APM_DEBUG turned on didn't reveal anything that jumped out at me and said > > 'this is broken'. This is all under 2.2.7R, with PAO-980913. > > > > Everything works fine under Win95 and DOS. The 380 is a bit weird in that > > there is no access to the APM settings from the BIOS setup -- it's all done > > through a DOS utility or the Win95 power management panel. > > > > Any clues? Or am I SOL here? I've attached my kernel config and dmesg > > output in case these are of any use. > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-mobile" in the body of the message -- =========================================================================== Scott Mitchell | PGP Key ID |"If I can't have my coffee, I'm just | 0x54B171B9 | like a dried up piece of roast goat" QMW College, London, UK | 0xAA775B8B | -- J. S. Bach. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Wed Nov 18 05:26:52 1998 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id FAA02844 for freebsd-mobile-outgoing; Wed, 18 Nov 1998 05:26:52 -0800 (PST) (envelope-from owner-freebsd-mobile@FreeBSD.ORG) Received: from gjp.erols.com (alex-va-n008c079.moon.jic.com [206.156.18.89]) by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id FAA02839 for ; Wed, 18 Nov 1998 05:26:51 -0800 (PST) (envelope-from gjp@gjp.erols.com) Received: from gjp.erols.com (gjp@localhost.erols.com [127.0.0.1]) by gjp.erols.com (8.9.1/8.8.7) with ESMTP id IAA03248; Wed, 18 Nov 1998 08:26:18 -0500 (EST) (envelope-from gjp@gjp.erols.com) X-Mailer: exmh version 2.0.1 12/23/97 To: Christian Kuhtz cc: mobile@FreeBSD.ORG From: "Gary Palmer" Subject: Re: Dell Latitude CPi In-reply-to: Your message of "Sun, 15 Nov 1998 21:08:31 EST." <19981115210831.A5535@ns1.adsu.bellsouth.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Date: Wed, 18 Nov 1998 08:26:18 -0500 Message-ID: <3244.911395578@gjp.erols.com> Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Christian Kuhtz wrote in message ID <19981115210831.A5535@ns1.adsu.bellsouth.com>: > Anyone out there who also has a Dell Latitude CPi 266XD notebook and would > like to share configuration experiences? If so, please contact me at > ck@adsu.bellsouth.com. I will summarize. I have one (through work). Seems to work OK. Caveats: 1) Uses the NeoMagic display chipset, so either wait for the new XF86 release or get AccelX from www.xig.com (I prefer the latter ... accelx is just so much nicer. No offense to the XFree group) 2) Sound controller was interesting to get working. The following line in your config file should get it working tho: device pcm0 at isa ? port ? tty irq 5 drq 0 vector pcmintr Its a Crystal 4237b (which I thought was a PnP chip, but PnP probes find nothign) according to Dell, but FreeBSD finds it as a ``SoundBlaster Pro 3.2''. It ships (or mine did, probably as options that the company specified) with a Psion Dacom v.90 faxmodem (the ``Gold Card'') which seems to work (haven't really tested it yet), and a ``Dell Fast Ethernet'' which is actually a 3com CardBus 10/100 card (which doesn't work at all under FreeBSD as we have no CardBus support). Mine came with 128Mb of RAM and a 4gig IBM hard drive. If you get the port replicator (C/Port?) then you'll find a 3com 3c905 ethernet card (in the docking station) gets find just fine. I have problems running X in the port replicator tho as I get a lot of psm errors. All in all, not bad if you don't have to pay for it :) Gary -- Gary Palmer FreeBSD Core Team Member FreeBSD: Turning PC's into workstations. See http://www.FreeBSD.ORG/ for info To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Wed Nov 18 05:57:49 1998 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id FAA06745 for freebsd-mobile-outgoing; Wed, 18 Nov 1998 05:57:49 -0800 (PST) (envelope-from owner-freebsd-mobile@FreeBSD.ORG) Received: from ebn00pgh01.esb.eur.deuba.com (gate1.de.deuba.com [193.150.166.51]) by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id FAA06734 for ; Wed, 18 Nov 1998 05:57:41 -0800 (PST) (envelope-from steve.gailey@metrosol.co.uk) Received: by ebn00pgh01.esb.eur.deuba.com id OAA27824; Wed, 18 Nov 1998 14:56:51 +0100 Received: ebn00pgh01.esb.eur.deuba.com id xma050166; Wed, 18 Nov 98 14:56:30 +0100 Received: from imr1.srv.uk.deuba.com by imr1.esb.eur.deuba.com id OAA01009; Wed, 18 Nov 1998 14:56:29 +0100 (MET) Received: from bmr2-e1.srv.uk.deuba.com by imr1.srv.uk.deuba.com id NAA03778; Wed, 18 Nov 1998 13:53:10 GMT Received: from sdbo1003.srv.uk.deuba.com by bmr2-e1.srv.uk.deuba.com id NAA23694; Wed, 18 Nov 1998 13:53:09 GMT Message-Id: <199811181353.NAA23694@bmr2-e1.srv.uk.deuba.com> Received: from dmglon010020773 ([10.140.189.99]) by sdbo1003.srv.uk.deuba.com (Lotus SMTP MTA Internal build v4.6.2 hotfix 3 (687.1 8-4-1998)) with SMTP id 002566C0.004C1359; Wed, 18 Nov 1998 13:50:56 +0000 From: "Steve Gailey" To: freebsd-mobile@FreeBSD.ORG Date: Wed, 18 Nov 1998 13:43:29 -0000 MIME-Version: 1.0 Content-type: text/plain; charset=US-ASCII Content-transfer-encoding: 7BIT Subject: Strong Authentication and PPP Reply-to: Steve.Gailey@metrosol.co.uk X-mailer: Pegasus Mail for Win32 (v3.01d) Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org This isn't really FBSD mobile specific, but... I am trying to access a clients site with PPP from by FBSD laptop. The problem I have is that they use strong authentication using securid. Does anyone know how to get the chat script to prompt for the password during the login? At present I am using the term command to do the whole thing manually, but it isn't the ideal solution. Thanks in advance. Steve Gailey Metronome Solutions Ltd. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Wed Nov 18 06:02:37 1998 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id GAA07266 for freebsd-mobile-outgoing; Wed, 18 Nov 1998 06:02:37 -0800 (PST) (envelope-from owner-freebsd-mobile@FreeBSD.ORG) Received: from ebn00pgh00.esb.eur.deuba.com (gate0.de.deuba.com [193.150.166.50]) by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id GAA07261 for ; Wed, 18 Nov 1998 06:02:28 -0800 (PST) (envelope-from steve.gailey@metrosol.co.uk) Received: by ebn00pgh00.esb.eur.deuba.com id PAA69602; Wed, 18 Nov 1998 15:01:50 +0100 Received: ebn00pgh00.esb.eur.deuba.com id xma026530; Wed, 18 Nov 98 15:01:10 +0100 Received: from imr1.srv.uk.deuba.com by imr1.esb.eur.deuba.com id PAA04018; Wed, 18 Nov 1998 15:01:06 +0100 (MET) Received: from bmr1-e1.srv.uk.deuba.com by imr1.srv.uk.deuba.com id NAA05235; Wed, 18 Nov 1998 13:57:47 GMT Received: from sdbo1003.srv.uk.deuba.com by bmr1-e1.srv.uk.deuba.com id NAA03939; Wed, 18 Nov 1998 13:57:47 GMT Message-Id: <199811181357.NAA03939@bmr1-e1.srv.uk.deuba.com> Received: from dmglon010020773 ([10.140.189.99]) by sdbo1003.srv.uk.deuba.com (Lotus SMTP MTA Internal build v4.6.2 hotfix 3 (687.1 8-4-1998)) with SMTP id 002566C0.004C7C7F; Wed, 18 Nov 1998 13:55:26 +0000 From: "Steve Gailey" To: freebsd-mobile@FreeBSD.ORG Date: Wed, 18 Nov 1998 13:47:59 -0000 MIME-Version: 1.0 Content-type: text/plain; charset=US-ASCII Content-transfer-encoding: 7BIT Subject: Omnibook 5000 CTS Reply-to: Steve.Gailey@metrosol.co.uk X-mailer: Pegasus Mail for Win32 (v3.01d) Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Has anyone got the sound on this box working? Steve Gailey Metronome Solutions Ltd. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Wed Nov 18 06:32:45 1998 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id GAA12397 for freebsd-mobile-outgoing; Wed, 18 Nov 1998 06:32:45 -0800 (PST) (envelope-from owner-freebsd-mobile@FreeBSD.ORG) Received: from horton.iaces.com (horton.iaces.com [204.147.87.98]) by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id GAA12392 for ; Wed, 18 Nov 1998 06:32:41 -0800 (PST) (envelope-from proot@horton.iaces.com) Received: (from proot@localhost) by horton.iaces.com (8.8.8/8.8.8) id IAA07293 for mobile@freebsd.org; Wed, 18 Nov 1998 08:32:15 -0600 (CST) (envelope-from proot) From: "Paul T. Root" Message-Id: <199811181432.IAA07293@horton.iaces.com> Subject: 3.0 on an HP Omnibook with Adaptec pcmcia? To: mobile@FreeBSD.ORG Date: Wed, 18 Nov 1998 08:32:15 -0600 (CST) X-Organization: USWEST !nterprise Networking - ACES X-Phone: (612) 664-3385 X-Fax: (612) 664-4779 X-Page: (800) SKY-PAGE PIN: 537-7270 X-Address: 600 Stinson Blvd, Fl 1S X-Address: Minneapolis, MN 55413 X-Mailer: ELM [version 2.4ME+ PL38 (25)] MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Hi all, I got the 3.0 CD and I'd like to play with it. Obviously, I don't want it on a production machine so that leaves my home machine and my laptop (which mostly suffers under NT). So the question is, will 3.0 work with my PCMCIA cards. 1) Adaptec 1460B 2) 3Com 3c589C 3) MegaHertz CC3288 4) Xircom ethernet+modem (I know, just the modem that's fine, the 3Com works). I'm only really concerned about the Adaptec. The others, I'd guess, will be fine. Paul. -- MicroEmacs vs GNU Emacs: M-X enter-nuclear-reactor-control-mode isn't there, but I never used it much anyway. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Wed Nov 18 06:38:13 1998 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id GAA13076 for freebsd-mobile-outgoing; Wed, 18 Nov 1998 06:38:13 -0800 (PST) (envelope-from owner-freebsd-mobile@FreeBSD.ORG) Received: from horton.iaces.com (horton.iaces.com [204.147.87.98]) by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id GAA13055 for ; Wed, 18 Nov 1998 06:38:07 -0800 (PST) (envelope-from proot@horton.iaces.com) Received: (from proot@localhost) by horton.iaces.com (8.8.8/8.8.8) id IAA07327; Wed, 18 Nov 1998 08:37:32 -0600 (CST) (envelope-from proot) From: "Paul T. Root" Message-Id: <199811181437.IAA07327@horton.iaces.com> Subject: Re: Omnibook 5000 CTS In-Reply-To: <199811181357.NAA03939@bmr1-e1.srv.uk.deuba.com> from Steve Gailey at "Nov 18, 98 01:47:59 pm" To: Steve.Gailey@metrosol.co.uk Date: Wed, 18 Nov 1998 08:37:32 -0600 (CST) Cc: freebsd-mobile@FreeBSD.ORG X-Organization: USWEST !nterprise Networking - ACES X-Phone: (612) 664-3385 X-Fax: (612) 664-4779 X-Page: (800) SKY-PAGE PIN: 537-7270 X-Address: 600 Stinson Blvd, Fl 1S X-Address: Minneapolis, MN 55413 X-Mailer: ELM [version 2.4ME+ PL38 (25)] MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org In a previous message, Steve Gailey said: > Has anyone got the sound on this box working? I never could get the free stuff going on my OnmiBook. But the OSS from 4front-tech.com (I guess it's www.se.opensound.com now), works great. It makes sound just 2 easy to bother with the old way. Loadable kernel module and 3 years of updates and tech support, for $20 or $25. It's well work it. Paul. -- Friends come and go, enemies accumulate To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Wed Nov 18 07:43:57 1998 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id HAA20806 for freebsd-mobile-outgoing; Wed, 18 Nov 1998 07:43:57 -0800 (PST) (envelope-from owner-freebsd-mobile@FreeBSD.ORG) Received: from thyme.cisco.com (thyme.cisco.com [171.69.43.12]) by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id HAA20800 for ; Wed, 18 Nov 1998 07:43:55 -0800 (PST) (envelope-from shibumi@cisco.com) Received: from cisco.com (localhost [127.0.0.1]) by thyme.cisco.com (8.8.5-Cisco.1/8.6.5) with ESMTP id HAA22538 for ; Wed, 18 Nov 1998 07:43:28 -0800 (PST) Message-Id: <199811181543.HAA22538@thyme.cisco.com> X-Mailer: exmh version 2.0zeta 7/24/97 To: freebsd-mobile@FreeBSD.ORG Subject: Re: Omnibook 5000 CTS In-reply-to: Your message of "Wed, 18 Nov 1998 08:37:32 CST." <199811181437.IAA07327@horton.iaces.com> Reply-to: shibumi@cisco.com X-Disclaimer: Unless otherwise noted below, this is not a policy statement Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Date: Wed, 18 Nov 1998 07:43:28 -0800 From: "Kenton A. Hoover" Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Beware the panic message, my son. Take a look at bug kern/8532 for 3.0. It applies to versions earlier than 3.0-current as well... > In a previous message, Steve Gailey said: > > Has anyone got the sound on this box working? > > I never could get the free stuff going on my > OnmiBook. But the OSS from 4front-tech.com > (I guess it's www.se.opensound.com now), works > great. It makes sound just 2 easy to bother > with the old way. Loadable kernel module and > 3 years of updates and tech support, for $20 > or $25. It's well work it. > > Paul. > > -- > Friends come and go, enemies accumulate > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-mobile" in the body of the message | Kenton A. Hoover Network Team Manager | shibumi@cisco.com | | Engineering Computer Services | | | Cisco Systems, Inc. | +1.408.526.5249 | |===================== http://www.shockwave.com/~shibumi ====================| | "Paranoia Is Our Profession" | To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Wed Nov 18 07:44:29 1998 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id HAA20980 for freebsd-mobile-outgoing; Wed, 18 Nov 1998 07:44:29 -0800 (PST) (envelope-from owner-freebsd-mobile@FreeBSD.ORG) Received: from thyme.cisco.com (thyme.cisco.com [171.69.43.12]) by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id HAA20961 for ; Wed, 18 Nov 1998 07:44:26 -0800 (PST) (envelope-from shibumi@cisco.com) Received: from cisco.com (localhost [127.0.0.1]) by thyme.cisco.com (8.8.5-Cisco.1/8.6.5) with ESMTP id HAA22569 for ; Wed, 18 Nov 1998 07:43:59 -0800 (PST) Message-Id: <199811181543.HAA22569@thyme.cisco.com> X-Mailer: exmh version 2.0zeta 7/24/97 To: freebsd-mobile@FreeBSD.ORG Subject: Re: APM on ThinkPad 380? In-reply-to: Your message of "Tue, 17 Nov 1998 09:27:04 GMT." <19981117092704.J20936@dcs.qmw.ac.uk> Reply-to: shibumi@cisco.com X-Disclaimer: Unless otherwise noted below, this is not a policy statement Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Date: Wed, 18 Nov 1998 07:43:59 -0800 From: "Kenton A. Hoover" Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org > On Sun, Nov 15, 1998 at 12:13:05PM -0800, Kenton A. Hoover wrote: > > You're SOL. Its something caused by the Windows 98 compatable BIOSes > > for the ThinkPads. You might try going to the IBM FTP site and discover if > > you can get a backrev BIOS that doesn't have this problem. However, the > > later 560X, 600 and 600E all have this problem. > > > > The only lead I have found so far is that the kernel APM driver never sees > > a SUSPEND event coming from the BIOS when the key sequence is hit. I've > > been trying to get some more information on this out of IBM. Mea culpa, mea culpa, mea maxima culpa. The suspend event is in fact received. I rebuilt with debugging on, stripped the system and tried again. I saw the suspend event and everything up to the final call into the APM bios. Upon resume, nada. I'm going to do a bit more debugging. Oh, I have checked against the linux differences in the APM code. The most evident difference is the removal of a CLI instruction from the call into the APM BIOS. I haven't ripped the code all apart though. | Kenton A. Hoover Network Team Manager | shibumi@cisco.com | | Engineering Computer Services | | | Cisco Systems, Inc. | +1.408.526.5249 | |===================== http://www.shockwave.com/~shibumi ====================| | "One man can change the world with a bullet in the right place." | | - Mick Travis (Malcolm McDowell) in "If..." | To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Wed Nov 18 18:05:49 1998 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id SAA21873 for freebsd-mobile-outgoing; Wed, 18 Nov 1998 18:05:49 -0800 (PST) (envelope-from owner-freebsd-mobile@FreeBSD.ORG) Received: from roma.coe.ufrj.br (roma.coe.ufrj.br [146.164.53.65]) by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id SAA21868 for ; Wed, 18 Nov 1998 18:05:45 -0800 (PST) (envelope-from jonny@jonny.eng.br) Received: (from jonny@localhost) by roma.coe.ufrj.br (8.8.8/8.8.8) id AAA13111; Thu, 19 Nov 1998 00:05:00 -0200 (EDT) (envelope-from jonny) From: Joao Carlos Mendes Luis Message-Id: <199811190205.AAA13111@roma.coe.ufrj.br> Subject: Re: strange behavious of two PCMCIA modem cards In-Reply-To: <364EF34C.446B@cs.strath.ac.uk> from Roger Hardiman at "Nov 15, 98 03:29:16 pm" To: roger@cs.strath.ac.uk (Roger Hardiman) Date: Thu, 19 Nov 1998 00:05:00 -0200 (EDT) Cc: mobile@FreeBSD.ORG X-Mailer: ELM [version 2.4ME+ PL40 (25)] MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org #define quoting(Roger Hardiman) // Hi, // I've got some strange results when hard coding IRQs for my PCMCIA cards. // // I have two PCMCIA modem cards, both the same make and they // emulate a standard serial port. // // I tried Hard Coding the IRQs in pccard.conf, // card "Nokia Mobile Phones" "DTP-2 ver II" // config 0x20 "sio2" 10 // config 0x20 "sio3" 11 // // and I compiled the kernel with SIO2 set to IRQ10 and SIO3 to IRQ11. // This worked on 2.2.5+PAO but on 3.0-RELEASE, sio2 worked fine // and sio3 worked but was "really slow" (like the IRQ was wrong). // // Changing to // card "Nokia Mobile Phones" "DTP-2 ver II" // config 0x20 "sio2" ? // config 0x20 "sio3" ? // and allowing the pccard software in 3.0-R to tell the sio driver // the 'actual irqs' fixed everything. // // My question then is, why can I not hard code the IRQ. Take a look at the output of pccardc dumpcis, and verify which are the valid interrupts for config 0x20. Maybe irq 11 is not a valid one. You cannot chose irqs on the fly if the card does not support them. Jonny -- Joao Carlos Mendes Luis M.Sc. Student jonny@jonny.eng.br Universidade Federal do Rio de Janeiro "This .sig is not meant to be politically correct." To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Wed Nov 18 19:48:00 1998 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id TAA01893 for freebsd-mobile-outgoing; Wed, 18 Nov 1998 19:48:00 -0800 (PST) (envelope-from owner-freebsd-mobile@FreeBSD.ORG) Received: from freebase.sitaranetworks.com (freebase.sitaranetworks.com [199.103.141.181]) by hub.freebsd.org (8.8.8/8.8.8) with SMTP id TAA01883 for ; Wed, 18 Nov 1998 19:47:58 -0800 (PST) (envelope-from john@loverso.southborough.ma.us) Received: from loverso.southborough.ma.us (rotty.sitaranetworks.com [199.103.141.107]) by freebase.sitaranetworks.com (8.8.8/8.8.8) with ESMTP id WAA15559; Wed, 18 Nov 1998 22:47:24 -0500 (EST) Received: from loverso.southborough.ma.us (localhost [127.0.0.1]) by loverso.southborough.ma.us (8.8.8/8.6.9) with ESMTP id WAA11185; Wed, 18 Nov 1998 22:47:23 -0500 (EST) Message-Id: <199811190347.WAA11185@loverso.southborough.ma.us> To: Steve.Gailey@metrosol.co.uk Cc: freebsd-mobile@FreeBSD.ORG Subject: Re: Strong Authentication and PPP In-reply-to: Message from "Steve Gailey" <199811181353.NAA23694@bmr2-e1.srv.uk.deuba.com> . X-Face: "UZ!}1W2N?eJdN(`1%|/OOPqJ).Idk?UyvWw'W-%`Gto8^IkEm>.g1O$[.;~}8E=Ire0|lO .o>:NlJS1@vO9bVmswRoq3j DdX9YGSeJ5a(mfX[1u>Z63G5_^+'8LVqjqvn X-Url: http://www.opengroup.org/~loverso/ Date: Wed, 18 Nov 1998 22:47:22 -0500 From: John Robert LoVerso Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org In my ppp.conf, I use: set login "TIMEOUT 5 \r-\\r\\r-ID:-\\r\\r-ID: \\U CODE: \"!/etc/ppp/GetSecurID 2664\" Accepted" The \\U is my username, which is also my SecurID ID. This prompts me and then returns the string. The "2664" is my PIN, which I hard code in there because this sits on the computer in my basement. The script is: #!/bin/sh # 0,1 modem # 2 ppp # 4 /dev/tty echo -n "**** Enter SecureID Code: $1" >/dev/tty read code &2 exit 0 This ususally works: Chat: Wait for (5): CODE: Connect: loverso Connect: Enter PASSCODE: Chat: Exec: /etc/ppp/GetSecurID 2664 **** Enter SecureID Code: 2664323710 Chat: Sending: 2664323710 Chat: Expecting: Accepted Chat: Wait for (5): Accepted Connect: PASSCODE Accepted login OK! But sometimes this fails: Chat: Wait for (5): CODE: Connect: loverso Connect: Enter PASSCODE: Chat: Exec: /etc/ppp/GetSecurID 2664 **** Enter SecureID Code: 2664703999 Warning: /etc/ppp/GetSecurID: signal 74 Warning: DialModem: login failed. Phase: Modem: Connect time: 42 secs: 0 octets in, 0 octets out Phase: total 0 bytes/sec ppp ON loverso> term Working in interactive mode Phase: Connected! Entering terminal mode. Type `~?' for help. PASSCODE Accepted ppp ON loverso> Packet mode. What happens here is that the script gets the "signal 74" (what is THAT?) during the read and bombs out. So, I type "term" and just enter the whole id string and hit ~p. John To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Wed Nov 18 22:11:24 1998 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id WAA15626 for freebsd-mobile-outgoing; Wed, 18 Nov 1998 22:11:24 -0800 (PST) (envelope-from owner-freebsd-mobile@FreeBSD.ORG) Received: from ns.mt.sri.com (sri-gw.MT.net [206.127.105.141]) by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id WAA15616 for ; Wed, 18 Nov 1998 22:11:22 -0800 (PST) (envelope-from nate@mt.sri.com) Received: from mt.sri.com (rocky.mt.sri.com [206.127.76.100]) by ns.mt.sri.com (8.8.8/8.8.8) with SMTP id XAA07267; Wed, 18 Nov 1998 23:10:46 -0700 (MST) (envelope-from nate@rocky.mt.sri.com) Received: by mt.sri.com (SMI-8.6/SMI-SVR4) id XAA02387; Wed, 18 Nov 1998 23:10:46 -0700 Date: Wed, 18 Nov 1998 23:10:46 -0700 Message-Id: <199811190610.XAA02387@mt.sri.com> From: Nate Williams MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit To: Joao Carlos Mendes Luis Cc: roger@cs.strath.ac.uk (Roger Hardiman), mobile@FreeBSD.ORG Subject: Re: strange behavious of two PCMCIA modem cards In-Reply-To: <199811190205.AAA13111@roma.coe.ufrj.br> References: <364EF34C.446B@cs.strath.ac.uk> <199811190205.AAA13111@roma.coe.ufrj.br> X-Mailer: VM 6.34 under 19.16 "Lille" XEmacs Lucid Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org > // I've got some strange results when hard coding IRQs for my PCMCIA cards. > // > // I have two PCMCIA modem cards, both the same make and they > // emulate a standard serial port. > // > // I tried Hard Coding the IRQs in pccard.conf, > // card "Nokia Mobile Phones" "DTP-2 ver II" > // config 0x20 "sio2" 10 > // config 0x20 "sio3" 11 > // > // and I compiled the kernel with SIO2 set to IRQ10 and SIO3 to IRQ11. > // This worked on 2.2.5+PAO but on 3.0-RELEASE, sio2 worked fine > // and sio3 worked but was "really slow" (like the IRQ was wrong). > // > // Changing to > // card "Nokia Mobile Phones" "DTP-2 ver II" > // config 0x20 "sio2" ? > // config 0x20 "sio3" ? > // and allowing the pccard software in 3.0-R to tell the sio driver > // the 'actual irqs' fixed everything. > // > // My question then is, why can I not hard code the IRQ. My guess is that on 3.0 something changed in the way the interrupts are being used, *OR* the probes have somehow awakened some part of your hardware that is using the IRQ in question. > Take a look at the output of pccardc dumpcis, and verify which are the > valid interrupts for config 0x20. Maybe irq 11 is not a valid one. > You cannot chose irqs on the fly if the card does not support them. Actually, the interrupts and the I/O ports the card's claim to use are completely irrelevant since the PCIC controller can map them to be anywhere. Nate To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Thu Nov 19 07:08:25 1998 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id HAA08761 for freebsd-mobile-outgoing; Thu, 19 Nov 1998 07:08:25 -0800 (PST) (envelope-from owner-freebsd-mobile@FreeBSD.ORG) Received: from roma.coe.ufrj.br (roma.coe.ufrj.br [146.164.53.65]) by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id HAA08756 for ; Thu, 19 Nov 1998 07:08:22 -0800 (PST) (envelope-from jonny@jonny.eng.br) Received: (from jonny@localhost) by roma.coe.ufrj.br (8.8.8/8.8.8) id MAA20669; Thu, 19 Nov 1998 12:57:04 -0200 (EDT) (envelope-from jonny) From: Joao Carlos Mendes Luis Message-Id: <199811191457.MAA20669@roma.coe.ufrj.br> Subject: Re: strange behavious of two PCMCIA modem cards In-Reply-To: <199811190610.XAA02387@mt.sri.com> from Nate Williams at "Nov 18, 98 11:10:46 pm" To: nate@mt.sri.com (Nate Williams) Date: Thu, 19 Nov 1998 12:57:04 -0200 (EDT) Cc: jonny@jonny.eng.br, roger@cs.strath.ac.uk, mobile@FreeBSD.ORG X-Mailer: ELM [version 2.4ME+ PL40 (25)] MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org #define quoting(Nate Williams) // > // My question then is, why can I not hard code the IRQ. // // My guess is that on 3.0 something changed in the way the interrupts are // being used, *OR* the probes have somehow awakened some part of your // hardware that is using the IRQ in question. // // > Take a look at the output of pccardc dumpcis, and verify which are the // > valid interrupts for config 0x20. Maybe irq 11 is not a valid one. // > You cannot chose irqs on the fly if the card does not support them. // // Actually, the interrupts and the I/O ports the card's claim to use are // completely irrelevant since the PCIC controller can map them to be // anywhere. I could not change my ethernet card irq from its default 5. Do you have another explanation for that ? I'm running 3.0, could it be the problem you said above ? Its configuration code allows only irq 5. The card is a D-Link DE660. Jonny -- Joao Carlos Mendes Luis M.Sc. Student jonny@jonny.eng.br Universidade Federal do Rio de Janeiro "This .sig is not meant to be politically correct." To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Thu Nov 19 08:24:43 1998 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id IAA15722 for freebsd-mobile-outgoing; Thu, 19 Nov 1998 08:24:43 -0800 (PST) (envelope-from owner-freebsd-mobile@FreeBSD.ORG) Received: from ns.mt.sri.com (sri-gw.MT.net [206.127.105.141]) by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id IAA15717 for ; Thu, 19 Nov 1998 08:24:42 -0800 (PST) (envelope-from nate@mt.sri.com) Received: from mt.sri.com (rocky.mt.sri.com [206.127.76.100]) by ns.mt.sri.com (8.8.8/8.8.8) with SMTP id JAA10841; Thu, 19 Nov 1998 09:24:06 -0700 (MST) (envelope-from nate@rocky.mt.sri.com) Received: by mt.sri.com (SMI-8.6/SMI-SVR4) id JAA04828; Thu, 19 Nov 1998 09:24:05 -0700 Date: Thu, 19 Nov 1998 09:24:05 -0700 Message-Id: <199811191624.JAA04828@mt.sri.com> From: Nate Williams MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit To: Joao Carlos Mendes Luis Cc: nate@mt.sri.com (Nate Williams), roger@cs.strath.ac.uk, mobile@FreeBSD.ORG Subject: Re: strange behavious of two PCMCIA modem cards In-Reply-To: <199811191457.MAA20669@roma.coe.ufrj.br> References: <199811190610.XAA02387@mt.sri.com> <199811191457.MAA20669@roma.coe.ufrj.br> X-Mailer: VM 6.34 under 19.16 "Lille" XEmacs Lucid Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org > // Actually, the interrupts and the I/O ports the card's claim to use are > // completely irrelevant since the PCIC controller can map them to be > // anywhere. > > I could not change my ethernet card irq from its default 5. Do you > have another explanation for that ? I'm running 3.0, could it be the > problem you said above ? Are you sure the other interrupts you tried were not already taken by some part of the system? Again, electrically speaking the card has no idea what IRQ was assigned to it, it just gets the interrupt that the PCIC controller passes to it. Nate To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Thu Nov 19 08:30:41 1998 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id IAA16600 for freebsd-mobile-outgoing; Thu, 19 Nov 1998 08:30:41 -0800 (PST) (envelope-from owner-freebsd-mobile@FreeBSD.ORG) Received: from stclairc.on.ca (mail.stclairc.on.ca [192.139.208.1]) by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id IAA16591 for ; Thu, 19 Nov 1998 08:30:27 -0800 (PST) (envelope-from tbothwel@stclairc.on.ca) Received: by gateway.stclairc.on.ca id <19762>; Fri, 20 Nov 1998 11:26:52 -0500 Message-Id: <98Nov20.112652est.19762@gateway.stclairc.on.ca> From: "Tim Bothwell" To: Subject: Thinkpad & Ethernet express Date: Thu, 19 Nov 1998 11:21:25 -0500 Mime-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-Msmail-Priority: Normal X-Mailer: Microsoft Outlook Express 4.72.3110.1 X-Mimeole: Produced By Microsoft MimeOLE V4.72.3110.3 Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Has anyone gotten FreeBSD to run on a Thinkpad 385? with an ethernet express network card? I tried PAO, but without any luck, Are there any other ideas/solutions? thanks tim To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Thu Nov 19 09:07:46 1998 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id JAA21460 for freebsd-mobile-outgoing; Thu, 19 Nov 1998 09:07:46 -0800 (PST) (envelope-from owner-freebsd-mobile@FreeBSD.ORG) Received: from roma.coe.ufrj.br (roma.coe.ufrj.br [146.164.53.65]) by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id JAA21452 for ; Thu, 19 Nov 1998 09:07:43 -0800 (PST) (envelope-from jonny@jonny.eng.br) Received: (from jonny@localhost) by roma.coe.ufrj.br (8.8.8/8.8.8) id PAA23317; Thu, 19 Nov 1998 15:06:11 -0200 (EDT) (envelope-from jonny) From: Joao Carlos Mendes Luis Message-Id: <199811191706.PAA23317@roma.coe.ufrj.br> Subject: Re: strange behavious of two PCMCIA modem cards In-Reply-To: <199811191624.JAA04828@mt.sri.com> from Nate Williams at "Nov 19, 98 09:24:05 am" To: nate@mt.sri.com (Nate Williams) Date: Thu, 19 Nov 1998 15:06:11 -0200 (EDT) Cc: jonny@jonny.eng.br, nate@mt.sri.com, roger@cs.strath.ac.uk, mobile@FreeBSD.ORG X-Mailer: ELM [version 2.4ME+ PL40 (25)] MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org #define quoting(Nate Williams) // > // Actually, the interrupts and the I/O ports the card's claim to use are // > // completely irrelevant since the PCIC controller can map them to be // > // anywhere. // > // > I could not change my ethernet card irq from its default 5. Do you // > have another explanation for that ? I'm running 3.0, could it be the // > problem you said above ? // // Are you sure the other interrupts you tried were not already taken by // some part of the system? Again, electrically speaking the card has no // idea what IRQ was assigned to it, it just gets the interrupt that the // PCIC controller passes to it. Humm... Now that you said this I went again and tried with other interrupts. It requests irq 5, and work with both irq 5 and irq 9, but it does not work with irq 11. AFAIK, there's nothing at irq 11 in my notebook (Toshiba CDS305). And, IIRC, I used this interrupt before with a SlimSCSI card. "Does not work" means "ed0: device timeout", BTW. Searching for one problem, and finding another. :) How can I find which irqs are in use ? May I share interrupts ? /etc/pccard.conf.sample has irq 13 in its irq pool, won't it conflict with npx0 ? My sound card is at irq 10, and I was trying to use pcf0 at irq 5. Jonny -- Joao Carlos Mendes Luis M.Sc. Student jonny@jonny.eng.br Universidade Federal do Rio de Janeiro "This .sig is not meant to be politically correct." To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Thu Nov 19 09:09:48 1998 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id JAA21783 for freebsd-mobile-outgoing; Thu, 19 Nov 1998 09:09:48 -0800 (PST) (envelope-from owner-freebsd-mobile@FreeBSD.ORG) Received: from ns.mt.sri.com (sri-gw.MT.net [206.127.105.141]) by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id JAA21776 for ; Thu, 19 Nov 1998 09:09:47 -0800 (PST) (envelope-from nate@mt.sri.com) Received: from mt.sri.com (rocky.mt.sri.com [206.127.76.100]) by ns.mt.sri.com (8.8.8/8.8.8) with SMTP id KAA11253; Thu, 19 Nov 1998 10:09:11 -0700 (MST) (envelope-from nate@rocky.mt.sri.com) Received: by mt.sri.com (SMI-8.6/SMI-SVR4) id KAA05146; Thu, 19 Nov 1998 10:09:10 -0700 Date: Thu, 19 Nov 1998 10:09:10 -0700 Message-Id: <199811191709.KAA05146@mt.sri.com> From: Nate Williams MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit To: Joao Carlos Mendes Luis Cc: nate@mt.sri.com (Nate Williams), roger@cs.strath.ac.uk, mobile@FreeBSD.ORG Subject: Re: strange behavious of two PCMCIA modem cards In-Reply-To: <199811191706.PAA23317@roma.coe.ufrj.br> References: <199811191624.JAA04828@mt.sri.com> <199811191706.PAA23317@roma.coe.ufrj.br> X-Mailer: VM 6.34 under 19.16 "Lille" XEmacs Lucid Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org > // > // Actually, the interrupts and the I/O ports the card's claim to use are > // > // completely irrelevant since the PCIC controller can map them to be > // > // anywhere. > // > > // > I could not change my ethernet card irq from its default 5. Do you > // > have another explanation for that ? I'm running 3.0, could it be the > // > problem you said above ? > // > // Are you sure the other interrupts you tried were not already taken by > // some part of the system? Again, electrically speaking the card has no > // idea what IRQ was assigned to it, it just gets the interrupt that the > // PCIC controller passes to it. > > Humm... Now that you said this I went again and tried with other > interrupts. It requests irq 5, and work with both irq 5 and irq 9, > but it does not work with irq 11. AFAIK, there's nothing at irq 11 in > my notebook (Toshiba CDS305). And, IIRC, I used this interrupt before > with a SlimSCSI card. I'll bet it didn't work very well. IRQ 11 seems to be used by a number of 'internal' functions in laptops for some reason. On my ThinkPad, it's used for *something*, but I have no idea what. > How can I find which irqs are in use ? You can't, really. Welcome to the world of PC's. :( Nate To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Thu Nov 19 10:45:24 1998 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id KAA04264 for freebsd-mobile-outgoing; Thu, 19 Nov 1998 10:45:24 -0800 (PST) (envelope-from owner-freebsd-mobile@FreeBSD.ORG) Received: from nohow.demon.co.uk (nohow.demon.co.uk [212.228.18.189]) by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id KAA04238 for ; Thu, 19 Nov 1998 10:45:14 -0800 (PST) (envelope-from noway@nohow.demon.co.uk) Received: from localhost (nohow.demon.co.uk [127.0.0.1]) by nohow.demon.co.uk (8.8.8/8.8.8) with ESMTP id QAA01544; Thu, 19 Nov 1998 16:07:27 GMT (envelope-from noway@nohow.demon.co.uk) Date: Thu, 19 Nov 1998 16:07:27 +0000 (GMT) From: Jose Marques To: "Paul T. Root" cc: mobile@FreeBSD.ORG Subject: Re: 3.0 on an HP Omnibook with Adaptec pcmcia? In-Reply-To: <199811181432.IAA07293@horton.iaces.com> Message-ID: X-No-Archive: yes MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org On Wed, 18 Nov 1998, Paul T. Root wrote: > So the question is, will 3.0 work with my PCMCIA > cards. > 1) Adaptec 1460B No, the aic driver is not CAM compatible as far as I'm aware. I was also told that I couldn't use the old aic driver under 3.0R. [Snip] > I'm only really concerned about the Adaptec. The others, I'd > guess, will be fine. The release notes say that a driver is being worked on - but don't hold your breath. I would suggest sticking to 2.2.x for the time being. > Paul. -- Jose Marques To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Thu Nov 19 19:59:24 1998 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id TAA05328 for freebsd-mobile-outgoing; Thu, 19 Nov 1998 19:59:24 -0800 (PST) (envelope-from owner-freebsd-mobile@FreeBSD.ORG) Received: from mail.eecis.udel.edu (louie.udel.edu [128.175.2.33]) by hub.freebsd.org (8.8.8/8.8.8) with SMTP id TAA05323 for ; Thu, 19 Nov 1998 19:59:23 -0800 (PST) (envelope-from alexandr@mail.eecis.udel.edu) Received: from ren.eecis.udel.edu by mail.eecis.udel.edu id aa01177; 19 Nov 1998 22:58 EST To: mobile@FreeBSD.ORG Subject: 10/100 Question Organization: Mos Eisley Candy Store Reply-To: alexandr@mail.eecis.udel.edu Date: Thu, 19 Nov 1998 22:58:14 -0500 From: Jerry Alexandratos Message-ID: <199811192258.aa01177@mail.eecis.udel.edu> Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Are any 16-bit 10/100 cards supported under -current? I'm eyeing the 3Com 3c574-TX, but any 10/100 16-bit card should do. --Jerry 8) Jerry Alexandratos % - % "Nothing inhabits my (8 8) alexandr@louie.udel.edu % - % thoughts, and oblivion (8 8) darkstar@strauss.udel.edu % - % drives my desires." (8 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Thu Nov 19 23:33:34 1998 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id XAA28075 for freebsd-mobile-outgoing; Thu, 19 Nov 1998 23:33:34 -0800 (PST) (envelope-from owner-freebsd-mobile@FreeBSD.ORG) Received: from dingo.cdrom.com (209.los-angeles-07.ca.dial-access.att.net [12.64.38.209]) by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id XAA28070 for ; Thu, 19 Nov 1998 23:33:31 -0800 (PST) (envelope-from mike@dingo.cdrom.com) Received: from dingo.cdrom.com (localhost [127.0.0.1]) by dingo.cdrom.com (8.9.1/8.8.8) with ESMTP id XAA00481; Thu, 19 Nov 1998 23:31:31 -0800 (PST) (envelope-from mike@dingo.cdrom.com) Message-Id: <199811200731.XAA00481@dingo.cdrom.com> X-Mailer: exmh version 2.0.2 2/24/98 To: alexandr@mail.eecis.udel.edu cc: mobile@FreeBSD.ORG Subject: Re: 10/100 Question In-reply-to: Your message of "Thu, 19 Nov 1998 22:58:14 EST." <199811192258.aa01177@mail.eecis.udel.edu> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Date: Thu, 19 Nov 1998 23:31:03 -0800 From: Mike Smith Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org > Are any 16-bit 10/100 cards supported under -current? I'm eyeing the > 3Com 3c574-TX, but any 10/100 16-bit card should do. Not AFAIK. The idea itself is pretty revolting, although I can understand the perceived necessity. -- \\ Sometimes you're ahead, \\ Mike Smith \\ sometimes you're behind. \\ mike@smith.net.au \\ The race is long, and in the \\ msmith@freebsd.org \\ end it's only with yourself. \\ msmith@cdrom.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Fri Nov 20 02:16:27 1998 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id CAA13930 for freebsd-mobile-outgoing; Fri, 20 Nov 1998 02:16:27 -0800 (PST) (envelope-from owner-freebsd-mobile@FreeBSD.ORG) Received: from thyme.cisco.com (thyme.cisco.com [171.69.43.12]) by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id CAA13925 for ; Fri, 20 Nov 1998 02:16:25 -0800 (PST) (envelope-from shibumi@cisco.com) Received: from cisco.com (localhost [127.0.0.1]) by thyme.cisco.com (8.8.5-Cisco.1/8.6.5) with ESMTP id CAA02382 for ; Fri, 20 Nov 1998 02:15:56 -0800 (PST) Message-Id: <199811201015.CAA02382@thyme.cisco.com> X-Mailer: exmh version 2.0zeta 7/24/97 To: freebsd-mobile@FreeBSD.ORG Subject: Re: APM on ThinkPad 380? In-reply-to: Your message of "Wed, 18 Nov 1998 07:43:59 PST." <199811181543.HAA22569@thyme.cisco.com> Reply-to: shibumi@cisco.com X-Disclaimer: Unless otherwise noted below, this is not a policy statement Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Date: Fri, 20 Nov 1998 02:15:56 -0800 From: "Kenton A. Hoover" Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Nailed it. I had tried removing that CLI, but apparently I missed something in the way the preprocessor deals with creating in-line assembly code. Anyway, I've managed to remove it completely this time, and APM works correctly between 95 and 99% of the time. I'm trying to get ahold of the PAO developer to get this changed incorporated into the next release. (well, > > On Sun, Nov 15, 1998 at 12:13:05PM -0800, Kenton A. Hoover wrote: > > > You're SOL. Its something caused by the Windows 98 compatable BIOSes > > > for the ThinkPads. You might try going to the IBM FTP site and discover if > > > you can get a backrev BIOS that doesn't have this problem. However, the > > > later 560X, 600 and 600E all have this problem. > > > > > > The only lead I have found so far is that the kernel APM driver never see s > > > a SUSPEND event coming from the BIOS when the key sequence is hit. I've > > > been trying to get some more information on this out of IBM. > > Mea culpa, mea culpa, mea maxima culpa. > > The suspend event is in fact received. I rebuilt with debugging on, stripped > the system and tried again. I saw the suspend event and everything up to the > final call into the APM bios. Upon resume, nada. I'm going to do a bit more > debugging. > > Oh, I have checked against the linux differences in the APM code. The most > evident difference is the removal of a CLI instruction from the call into the > APM BIOS. I haven't ripped the code all apart though. | Kenton A. Hoover Network Team Manager | shibumi@cisco.com | | Engineering Computer Services | | | Cisco Systems, Inc. | +1.408.526.5249 | |===================== http://www.shockwave.com/~shibumi ====================| | You cannot help the poor man by destroying the rich. | | -- William Boetcker (often attributed to Abraham Lincoln) | To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Fri Nov 20 04:35:46 1998 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id EAA26629 for freebsd-mobile-outgoing; Fri, 20 Nov 1998 04:35:46 -0800 (PST) (envelope-from owner-freebsd-mobile@FreeBSD.ORG) Received: from mail.eecis.udel.edu (louie.udel.edu [128.175.2.33]) by hub.freebsd.org (8.8.8/8.8.8) with SMTP id EAA26624 for ; Fri, 20 Nov 1998 04:35:44 -0800 (PST) (envelope-from alexandr@mail.eecis.udel.edu) Received: from ren.eecis.udel.edu by mail.eecis.udel.edu id aa11549; 20 Nov 1998 07:35 EST To: mobile@FreeBSD.ORG Subject: 10/100 Support Organization: Mos Eisley Candy Store Reply-To: alexandr@mail.eecis.udel.edu Date: Fri, 20 Nov 1998 07:35:00 -0500 From: Jerry Alexandratos Message-ID: <199811200735.aa11549@mail.eecis.udel.edu> Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Okay, since it looks like -current doesn't have support for any 16-bit 10/100 cards, let me ask a few other questions. 1) Will PAO be patching/supporting 3.0/-current anytime soon? 2) How difficult is it to just hand munge the PAO stuff with -current? 3) What Fast Ethernet card would PAO users recommend? As always, thanks in advance... --Jerry 8) Jerry Alexandratos % - % "Nothing inhabits my (8 8) alexandr@louie.udel.edu % - % thoughts, and oblivion (8 8) darkstar@strauss.udel.edu % - % drives my desires." (8 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Fri Nov 20 05:54:07 1998 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id FAA04729 for freebsd-mobile-outgoing; Fri, 20 Nov 1998 05:54:07 -0800 (PST) (envelope-from owner-freebsd-mobile@FreeBSD.ORG) Received: from hotpoint.dcs.qmw.ac.uk (hotpoint.dcs.qmw.ac.uk [138.37.88.162]) by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id FAA04667 for ; Fri, 20 Nov 1998 05:53:48 -0800 (PST) (envelope-from scott@dcs.qmw.ac.uk) Received: from brunos-sun.dcs.qmw.ac.uk [138.37.88.185]; by hotpoint.dcs.qmw.ac.uk (8.8.7/8.8.5/S-4.0) with SMTP; id NAA01599; Fri, 20 Nov 1998 13:53:02 GMT Received: locally by brunos-sun (SMI-8.6/QMW-client-3.2b); poster "scott"; id NAA21087; Fri, 20 Nov 1998 13:52:02 GMT Message-ID: <19981120135202.A26458@dcs.qmw.ac.uk> Date: Fri, 20 Nov 1998 13:52:02 +0000 From: Scott Mitchell To: shibumi@cisco.com, freebsd-mobile@FreeBSD.ORG Subject: Re: APM on ThinkPad 380? References: <199811181543.HAA22569@thyme.cisco.com> <199811201015.CAA02382@thyme.cisco.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 0.93.2i In-Reply-To: <199811201015.CAA02382@thyme.cisco.com>; from Kenton A. Hoover on Fri, Nov 20, 1998 at 02:15:56AM -0800 Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org On Fri, Nov 20, 1998 at 02:15:56AM -0800, Kenton A. Hoover wrote: > Nailed it. I had tried removing that CLI, but apparently I missed something > in the way the preprocessor deals with creating in-line assembly code. Anyway, > I've managed to remove it completely this time, and APM works correctly > between 95 and 99% of the time. I'm trying to get ahold of the PAO developer > to get this changed incorporated into the next release. Way cool! You're way ahead of me -- I was going to start tearing the code apart over the weekend, in between grading papers... So is that the CLI in apm.c, apm_init.S or real_prot.S? Cheers, Scott. -- =========================================================================== Scott Mitchell | PGP Key ID |"If I can't have my coffee, I'm just | 0x54B171B9 | like a dried up piece of roast goat" QMW College, London, UK | 0xAA775B8B | -- J. S. Bach. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Fri Nov 20 08:23:44 1998 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id IAA19545 for freebsd-mobile-outgoing; Fri, 20 Nov 1998 08:23:44 -0800 (PST) (envelope-from owner-freebsd-mobile@FreeBSD.ORG) Received: from ns.mt.sri.com (sri-gw.MT.net [206.127.105.141]) by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id IAA19538 for ; Fri, 20 Nov 1998 08:23:43 -0800 (PST) (envelope-from nate@mt.sri.com) Received: from mt.sri.com (rocky.mt.sri.com [206.127.76.100]) by ns.mt.sri.com (8.8.8/8.8.8) with SMTP id JAA20342; Fri, 20 Nov 1998 09:23:12 -0700 (MST) (envelope-from nate@rocky.mt.sri.com) Received: by mt.sri.com (SMI-8.6/SMI-SVR4) id JAA14304; Fri, 20 Nov 1998 09:23:08 -0700 Date: Fri, 20 Nov 1998 09:23:08 -0700 Message-Id: <199811201623.JAA14304@mt.sri.com> From: Nate Williams MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit To: shibumi@cisco.com Cc: freebsd-mobile@FreeBSD.ORG Subject: Re: APM on ThinkPad 380? In-Reply-To: <199811201015.CAA02382@thyme.cisco.com> References: <199811181543.HAA22569@thyme.cisco.com> <199811201015.CAA02382@thyme.cisco.com> X-Mailer: VM 6.34 under 19.16 "Lille" XEmacs Lucid Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org > Nailed it. I had tried removing that CLI, but apparently I missed > something in the way the preprocessor deals with creating in-line > assembly code. Anyway, I've managed to remove it completely this > time, and APM works correctly between 95 and 99% of the time. I'm > trying to get ahold of the PAO developer to get this changed > incorporated into the next release. Note, this stuff also exists with sometimes better robustness in FreeBSD, so can you submit the patch as a PR to stock FreeBSD as well. Nate To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Fri Nov 20 10:30:56 1998 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id KAA02310 for freebsd-mobile-outgoing; Fri, 20 Nov 1998 10:30:56 -0800 (PST) (envelope-from owner-freebsd-mobile@FreeBSD.ORG) Received: from stclairc.on.ca (mail.stclairc.on.ca [192.139.208.1]) by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id KAA02305 for ; Fri, 20 Nov 1998 10:30:54 -0800 (PST) (envelope-from tbothwel@stclairc.on.ca) Received: by gateway.stclairc.on.ca id <19719>; Sat, 21 Nov 1998 13:27:55 -0500 Date: Fri, 20 Nov 1998 13:26:00 -0500 From: timothy bothwell Subject: Device not configured To: mobile@FreeBSD.ORG Message-Id: <98Nov21.132755est.19719@gateway.stclairc.on.ca> Mime-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Hi, How do I configure a card? ie: I'm getting the following error: /dev/card1: Device not configured thanks tim To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Fri Nov 20 12:00:47 1998 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id MAA09609 for freebsd-mobile-outgoing; Fri, 20 Nov 1998 12:00:47 -0800 (PST) (envelope-from owner-freebsd-mobile@FreeBSD.ORG) Received: from zeugme.francenet.fr (zeugme.francenet.fr [193.149.97.1]) by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id MAA09601 for ; Fri, 20 Nov 1998 12:00:42 -0800 (PST) (envelope-from perrot@FranceNet.fr) Received: from breizh.francenet.fr (gpconnect.francenet.net [193.149.111.208]) by zeugme.francenet.fr (8.8.5/8.8.5) with ESMTP id UAA13633; Fri, 20 Nov 1998 20:59:55 +0100 (MET) Received: from breizh.francenet.fr (localhost.francenet.fr [127.0.0.1]) by breizh.francenet.fr (8.9.1/8.9.1) with ESMTP id UAA02721; Fri, 20 Nov 1998 20:56:43 +0100 (CET) Message-Id: <199811201956.UAA02721@breizh.francenet.fr> X-Mailer: exmh version 2.0.2 2/24/98 To: timothy bothwell Subject: Re: Device not configured In-reply-to: tbothwel's message of Fri, 20 Nov 1998 13:26:00 -0500. <98Nov21.132755est.19719@gateway.stclairc.on.ca> Cc: mobile@FreeBSD.ORG X-Face: '%)H7X3>"mU[aaPz3aZ`^e{*DV1&W;+P-Wx*Yk)Ah[e(-AO&EB\D.gq2y{kH73Q29}_A4H,eykdf!9dj[m\gwFgZOTt?=7gI+RBN,I({A32-MyZrmtrD%8*L/boGS0,+Lj$H|@ X-Url: http://www.francenet.fr/ Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Date: Fri, 20 Nov 1998 20:56:41 +0100 From: Gildas PERROT Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org cd /dev ./MAKEDEV card1 > Hi, > How do I configure a card? ie: I'm getting the following error: > /dev/card1: Device not configured > > thanks > > tim > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-mobile" in the body of the message > -- Gildas PERROT, perrot@francenet.fr __o FranceNet, 28 rue Desaix, 75015 Paris ---_ \<,_ http://www.francenet.fr ---- (_)/ (_) To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Fri Nov 20 12:08:46 1998 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id MAA10845 for freebsd-mobile-outgoing; Fri, 20 Nov 1998 12:08:46 -0800 (PST) (envelope-from owner-freebsd-mobile@FreeBSD.ORG) Received: from stclairc.on.ca (mail.stclairc.on.ca [192.139.208.1]) by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id MAA10810 for ; Fri, 20 Nov 1998 12:08:43 -0800 (PST) (envelope-from tbothwel@stclairc.on.ca) Received: by gateway.stclairc.on.ca id <19730>; Sat, 21 Nov 1998 15:05:39 -0500 Date: Fri, 20 Nov 1998 15:03:41 -0500 From: timothy bothwell Subject: Re: Device not configured To: Gildas PERROT Cc: mobile@FreeBSD.ORG In-Reply-To: <199811201956.UAA02721@breizh.francenet.fr> Message-Id: <98Nov21.150539est.19730@gateway.stclairc.on.ca> Mime-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org I type pccardc enabler 1 ed0 -a 300 -i 15 and I still get pccardc: /dev/card1: Device not configured even after typing the MAKEDEV In /dev all 4 card's are listed, and I get the same error for all the slots. On Fri, 20 Nov 1998, Gildas PERROT wrote: > cd /dev > ./MAKEDEV card1 > > > Hi, > > How do I configure a card? ie: I'm getting the following error: > > /dev/card1: Device not configured > > > > thanks > > > > tim > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > with "unsubscribe freebsd-mobile" in the body of the message > > > > -- > Gildas PERROT, perrot@francenet.fr __o > FranceNet, 28 rue Desaix, 75015 Paris ---_ \<,_ > http://www.francenet.fr ---- (_)/ (_) > > > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Fri Nov 20 12:24:10 1998 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id MAA12959 for freebsd-mobile-outgoing; Fri, 20 Nov 1998 12:24:10 -0800 (PST) (envelope-from owner-freebsd-mobile@FreeBSD.ORG) Received: from awfulhak.org (awfulhak.force9.co.uk [195.166.136.63]) by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id MAA12952 for ; Fri, 20 Nov 1998 12:24:06 -0800 (PST) (envelope-from brian@Awfulhak.org) Received: from woof.lan.awfulhak.org (woof.lan.Awfulhak.org [172.16.0.7]) by awfulhak.org (8.8.8/8.8.8) with ESMTP id UAA14569; Fri, 20 Nov 1998 20:22:14 GMT (envelope-from brian@Awfulhak.org) Received: from woof.lan.awfulhak.org (localhost [127.0.0.1]) by woof.lan.awfulhak.org (8.9.1/8.9.1) with ESMTP id UAA07208; Fri, 20 Nov 1998 20:22:13 GMT (envelope-from brian@woof.lan.awfulhak.org) Message-Id: <199811202022.UAA07208@woof.lan.awfulhak.org> X-Mailer: exmh version 2.0.2 2/24/98 To: Steve.Gailey@metrosol.co.uk cc: freebsd-mobile@FreeBSD.ORG Subject: Re: Strong Authentication and PPP In-reply-to: Your message of "Wed, 18 Nov 1998 13:43:29 GMT." <199811181353.NAA23694@bmr2-e1.srv.uk.deuba.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Date: Fri, 20 Nov 1998 20:22:13 +0000 From: Brian Somers Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org > This isn't really FBSD mobile specific, but... > > I am trying to access a clients site with PPP from by FBSD laptop. > The problem I have is that they use strong authentication using > securid. > > Does anyone know how to get the chat script to prompt for the > password during the login? At present I am using the term > command to do the whole thing manually, but it isn't the ideal > solution. > > Thanks in advance. I've never gotten around to sorting out a good solution for this (although I was discussing it with someone only today). You can execute programs from your chat script and could theoretically write a script that displayed the last few lines of the ppp log and then prompt for something to echo to stdout (which gets picked back up by ppp). Check the man page for details on ``!'' commands in the chat script.... it'll need a bit of experimentation though. I think the correct solution is something more along the lines of connecting with pppctl, setting local chat logging and having some facility in the chat script for waiting for a ``send-chat'' command to be executed from elsewhere.... the prompt will display the conversation as it happens, and when the secureid is figured out, you can ``send-chat whatever''. Do you think this sort of thing might be appropriate ? > Steve Gailey > Metronome Solutions Ltd. -- Brian , , Don't _EVER_ lose your sense of humour.... To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Fri Nov 20 14:18:04 1998 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id OAA27290 for freebsd-mobile-outgoing; Fri, 20 Nov 1998 14:18:04 -0800 (PST) (envelope-from owner-freebsd-mobile@FreeBSD.ORG) Received: from vader.cs.berkeley.edu (vader.CS.Berkeley.EDU [128.32.38.234]) by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id OAA27284 for ; Fri, 20 Nov 1998 14:18:03 -0800 (PST) (envelope-from asami@vader.cs.berkeley.edu) Received: from silvia.hip.berkeley.edu (sjx-ca115-49.ix.netcom.com [207.223.162.113]) by vader.cs.berkeley.edu (8.8.7/8.7.3) with ESMTP id OAA13932; Fri, 20 Nov 1998 14:17:28 -0800 (PST) Received: (from asami@localhost) by silvia.hip.berkeley.edu (8.8.8/8.6.9) id OAA10053; Fri, 20 Nov 1998 14:17:25 -0800 (PST) Date: Fri, 20 Nov 1998 14:17:25 -0800 (PST) Message-Id: <199811202217.OAA10053@silvia.hip.berkeley.edu> To: mike@smith.net.au CC: alexandr@mail.eecis.udel.edu, mobile@FreeBSD.ORG In-reply-to: <199811200731.XAA00481@dingo.cdrom.com> (message from Mike Smith on Thu, 19 Nov 1998 23:31:03 -0800) Subject: Re: 10/100 Question From: asami@FreeBSD.ORG (Satoshi Asami) Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org * > Are any 16-bit 10/100 cards supported under -current? I'm eyeing the * > 3Com 3c574-TX, but any 10/100 16-bit card should do. I have a Linksys 10/100 card working. Here's the relevant post (sent to freebsd-mobile originally). It's pretty slow, but I didn't want to buy a dual-speed hub or switch just for the laptop. Satoshi ------- To: ohashi@mickey.ai.kyutech.ac.jp CC: mobile@FreeBSD.ORG Subject: Re: 100Mbps ether for PCCARD? From: asami@freebsd.org (Satoshi Asami) * Mr. Arai said PLANET FNW-3600-T is the OEM of LINKSYS EtherFast * 10/100 and it is woking under ed driver with a patch. Thanks! I got it to work with PAO-980430 (2.2.6R). Boy this thing is slow (something like 1.2MB/s over a 100Mbps link) but it's good enough for my purpose (connect the laptop to a stupid 100Mbps hub). :) * http://www.jp.FreeBSD.ORG/~yuki/FreeBSD/readmail.cgi?source=nomads&docnum=7152 * (sorry in Japanese :-) I can read that, no problem. :) Anyway, here's the patch for anyone who might be wondering. It's almost the same as the patch in the above-mentioned article (only one hunk fails due to NCRD -> NCARD change). Satoshi ------- --- if_ed.c.orig Mon Jun 8 19:37:04 1998 +++ if_ed.c Mon Jun 8 22:13:21 1998 @@ -194,6 +194,9 @@ static u_long ds_crc(u_char *ep); +static int ed_get_Linksys __P((struct ed_softc *)); +#define GWETHER 1 + #if NCARD > 0 #include #include @@ -1066,6 +1069,24 @@ return (ED_3COM_IO_PORTS); } +static int +ed_get_Linksys(sc) + struct ed_softc *sc; +{ + u_char sum; + int i; + + for (sum = 0, i = 0x14; i < 0x1c; i++) + sum += inb(sc->nic_addr + i); + if (sum != 0xff) + return (0); + for (i = 0; i < ETHER_ADDR_LEN; i++) { + sc->arpcom.ac_enaddr[i] = inb(sc->nic_addr + 0x14 + i); + printf("%02x.", sc->arpcom.ac_enaddr[i]); + } + return (1); +} + /* * Probe and vendor-specific initialization routine for NE1000/2000 boards */ @@ -1080,6 +1101,7 @@ u_char romdata[16], tmp; static char test_pattern[32] = "THIS is A memory TEST pattern"; char test_buffer[32]; + int linksys = 0; sc->asic_addr = port + ED_NOVELL_ASIC_OFFSET; sc->nic_addr = port + ED_NOVELL_NIC_OFFSET; @@ -1149,7 +1171,13 @@ ed_pio_writemem(sc, test_pattern, 8192, sizeof(test_pattern)); ed_pio_readmem(sc, 8192, test_buffer, sizeof(test_pattern)); - if (bcmp(test_pattern, test_buffer, sizeof(test_pattern))) { + linksys = ed_get_Linksys(sc); + if (linksys) { + outb(sc->nic_addr + ED_P0_DCR, ED_DCR_WTS | ED_DCR_FT1 | ED_DCR_LS); + sc->isa16bit = 1; + sc->type = ED_TYPE_NE2000; + sc->type_str = "Linksys"; + } else if (bcmp(test_pattern, test_buffer, sizeof(test_pattern))) { /* not an NE1000 - try NE2000 */ outb(sc->nic_addr + ED_P0_DCR, ED_DCR_WTS | ED_DCR_FT1 | ED_DCR_LS); @@ -1259,19 +1287,22 @@ * Use one xmit buffer if < 16k, two buffers otherwise (if not told * otherwise). */ - if ((memsize < 16384) || (flags & ED_FLAGS_NO_MULTI_BUFFERING)) + if ((sc->mem_size < 16384) || (flags & ED_FLAGS_NO_MULTI_BUFFERING)) sc->txb_cnt = 1; else sc->txb_cnt = 2; sc->rec_page_start = sc->tx_page_start + sc->txb_cnt * ED_TXBUF_SIZE; - sc->rec_page_stop = sc->tx_page_start + memsize / ED_PAGE_SIZE; + n = sc->tx_page_start + sc->mem_size / ED_PAGE_SIZE; + sc->rec_page_stop = (n > 0xff) ? 0xff : n; sc->mem_ring = sc->mem_start + sc->txb_cnt * ED_PAGE_SIZE * ED_TXBUF_SIZE; - ed_pio_readmem(sc, 0, romdata, 16); - for (n = 0; n < ETHER_ADDR_LEN; n++) - sc->arpcom.ac_enaddr[n] = romdata[n * (sc->isa16bit + 1)]; + if (!linksys) { + ed_pio_readmem(sc, 0, romdata, 16); + for (n = 0; n < ETHER_ADDR_LEN; n++) + sc->arpcom.ac_enaddr[n] = romdata[n * (sc->isa16bit + 1)]; + } #ifdef GWETHER if (sc->arpcom.ac_enaddr[2] == 0x86) { To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Fri Nov 20 14:24:52 1998 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id OAA28055 for freebsd-mobile-outgoing; Fri, 20 Nov 1998 14:24:52 -0800 (PST) (envelope-from owner-freebsd-mobile@FreeBSD.ORG) Received: from vader.cs.berkeley.edu (vader.CS.Berkeley.EDU [128.32.38.234]) by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id OAA28050 for ; Fri, 20 Nov 1998 14:24:51 -0800 (PST) (envelope-from asami@vader.cs.berkeley.edu) Received: from silvia.hip.berkeley.edu (sjx-ca115-49.ix.netcom.com [207.223.162.113]) by vader.cs.berkeley.edu (8.8.7/8.7.3) with ESMTP id OAA13940; Fri, 20 Nov 1998 14:24:21 -0800 (PST) Received: (from asami@localhost) by silvia.hip.berkeley.edu (8.8.8/8.6.9) id OAA10063; Fri, 20 Nov 1998 14:24:14 -0800 (PST) Date: Fri, 20 Nov 1998 14:24:14 -0800 (PST) Message-Id: <199811202224.OAA10063@silvia.hip.berkeley.edu> To: alexandr@mail.eecis.udel.edu CC: mobile@FreeBSD.ORG In-reply-to: <199811200735.aa11549@mail.eecis.udel.edu> (message from Jerry Alexandratos on Fri, 20 Nov 1998 07:35:00 -0500) Subject: Re: 10/100 Support From: asami@FreeBSD.ORG (Satoshi Asami) Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org * Okay, since it looks like -current doesn't have support for any 16-bit * 10/100 cards, let me ask a few other questions. * * 1) Will PAO be patching/supporting 3.0/-current anytime soon? Oops sorry, you already knew about PAO. Please disregard my post. As for this question, I heard they are working on it now. Satoshi To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message