From owner-freebsd-mobile@FreeBSD.ORG Sun Jun 8 04:44:57 2003 Return-Path: Delivered-To: freebsd-mobile@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 6B2EA37B401; Sun, 8 Jun 2003 04:44:55 -0700 (PDT) Received: from mailout05.sul.t-online.com (mailout05.sul.t-online.com [194.25.134.82]) by mx1.FreeBSD.org (Postfix) with ESMTP id DEB6543F85; Sun, 8 Jun 2003 04:44:53 -0700 (PDT) (envelope-from Amnesia@t-online.de) Received: from fwd03.aul.t-online.de by mailout05.sul.t-online.com with smtp id 19OybU-00086s-03; Sun, 08 Jun 2003 13:44:52 +0200 Received: from video (rfEeVkZOZexUc1V-v1RIYT0xtFYQyI-qZDxBJ+OmhSb8hFXq5syLZq@[217.234.219.72]) by fwd03.sul.t-online.com with smtp id 19OybS-0RRrge0; Sun, 8 Jun 2003 13:44:50 +0200 Message-ID: <00c301c32db3$61effea0$030aa8c0@video> From: Amnesia@t-online.de (=?iso-8859-1?Q?Torsten_K=F6tting?=) To: Date: Sun, 8 Jun 2003 13:44:54 +0200 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2800.1106 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1106 X-Seen: false X-ID: rfEeVkZOZexUc1V-v1RIYT0xtFYQyI-qZDxBJ+OmhSb8hFXq5syLZq@t-dialin.net cc: freebsd-current@freebsd.org Subject: mini-PCI Cards dont work X-BeenThere: freebsd-mobile@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list Reply-To: =?iso-8859-1?Q?Torsten_K=F6tting?= List-Id: Mobile computing with FreeBSD List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 08 Jun 2003 11:44:57 -0000 Hi there, i installed RC5.1 on my laptop 1 week ago. It works fine so far but the mini-PCI wlan card doesnt work. Its a Cisco Aironet 350. The driver does find the card but when I activate its interface an0 I get a timeout message, the cpu-load jumps to 100% and I need to reset the laptop. After checking several mailarchives and trying older firmwares for the MPI350 without having any success I thought I give up on the MPI350 and buy an Orinoco wlan card, again MiniPCI. I was sure I have solved my probs now but I was wrong. Exactly the same problem appears now with the Orinoco Card. The Driver finds it, after activating the wi0 interface the system crashes. I dont know what to do now :/ both card work fine in the XP-Installation on the same laptop, but I finally wanted to get rid of windows and installing FreeBSD was supposed to be the final attempt. Its a Gericom laptop build on standart desktop hardware, SIS645DX chipset. I compiled a new kernel with a mini-configuration but it didnt help. Please help ... .. thanks in advance Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.1-CURRENT #1: Sat Jun 7 21:18:51 GMT 2003 root@smoke.phibes.net:/usr/src/sys/i386/compile/GENERIC Preloaded elf kernel "/boot/kernel/kernel" at 0xc0727000. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0727294. Calibrating clock(s) ... i8254 clock: 1193127 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz Calibrating TSC clock ... TSC clock: 2141110188 Hz Timecounter "TSC" frequency 2141110188 Hz CPU: Intel(R) Pentium(R) 4 CPU 2.53GHz (2141.11-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf27 Stepping = 7 Features=0xbfebfbff real memory = 534708224 (509 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) 0x000000000074e000 - 0x000000001f4d2fff, 517492736 bytes (126341 pages) avail memory = 511643648 (487 MB) bios32: Found BIOS32 Service Directory header at 0xc00f69c0 bios32: Entry = 0xfd880 (c00fd880) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xfd880+0x138 pnpbios: Found PnP BIOS data at 0xc00f6a20 pnpbios: Entry = f0000:a964 Rev = 1.0 Other BIOS signatures found: wlan: <802.11 Link Layer> null: random: mem: Pentium Pro MTRR support enabled npx0: on motherboard npx0: INT 16 interface acpi0: on motherboard pci_open(1): mode 1 addr port (0x0cf8) is 0x80001504 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=06461039) pcibios: BIOS version 2.10 Using $PIR table, 8 entries at 0xc00fdf40 PCI-Only Interrupts: none Location Bus Device Pin Link IRQs slot 1 0 5 A 0x43 3 4 5 9 10 11 15 slot 1 0 5 B 0x44 3 4 5 9 10 11 15 slot 2 0 6 A 0x44 3 4 5 9 10 11 15 embedded 0 10 A 0x42 3 4 5 6 7 9 10 11 12 14 15 embedded 0 1 A 0x41 3 4 5 6 9 10 11 15 embedded 0 1 B 0x42 3 4 5 6 9 10 11 15 embedded 0 2 A 0x41 3 4 5 9 10 11 15 embedded 0 2 B 0x42 3 4 5 9 10 11 15 embedded 0 2 C 0x43 3 4 5 9 10 11 15 embedded 0 2 D 0x44 3 4 5 9 10 11 15 embedded 0 3 A 0x60 3 4 5 9 10 11 15 embedded 0 3 B 0x61 3 4 5 9 10 11 15 embedded 0 3 C 0x62 3 4 5 9 10 11 15 embedded 0 3 D 0x63 3 4 5 9 10 11 15 embedded 0 4 A 0x44 3 4 5 9 10 11 15 AcpiOsDerivePciId: bus 0 dev 2 func 0 acpi0: power button is handled as a fixed feature programming model. ACPI timer looks GOOD min = 2, max = 3, width = 1 ACPI timer looks GOOD min = 2, max = 4, width = 2 ACPI timer looks GOOD min = 2, max = 3, width = 1 ACPI timer looks GOOD min = 2, max = 4, width = 2 ACPI timer looks GOOD min = 2, max = 3, width = 1 ACPI timer looks GOOD min = 2, max = 4, width = 2 ACPI timer looks GOOD min = 2, max = 4, width = 2 ACPI timer looks GOOD min = 2, max = 4, width = 2 ACPI timer looks GOOD min = 2, max = 3, width = 1 ACPI timer looks GOOD min = 2, max = 4, width = 2 Timecounter "ACPI-fast" frequency 3579545 Hz AcpiOsDerivePciId: bus 0 dev 0 func 0 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0 acpi_cpu0: on acpi0 acpi_cpu1: on acpi0 pcib0: port 0xcf8-0xcff on acpi0 ---- initial configuration ------------------------ \\_SB_.PCI0.LPC_.LNKA irq 3: [ 5 10 11] low,level,sharable 0.1.0 \\_SB_.PCI0.LPC_.LNKB irq 4: [ 3 4 5 7 9 10 11] low,level,sharable 0.1.1 \\_SB_.PCI0.LPC_.LNKA irq 3: [ 5 10 11] low,level,sharable 0.2.0 \\_SB_.PCI0.LPC_.LNKB irq 4: [ 3 4 5 7 9 10 11] low,level,sharable 0.2.1 \\_SB_.PCI0.LPC_.LNKC irq 9: [ 3 4 5 9 10 11] low,level,sharable 0.2.2 \\_SB_.PCI0.LPC_.LNKD irq 11: [ 3 4 5 7 9 10 11] low,level,sharable 0.2.3 \\_SB_.PCI0.LPC_.LNKE irq 9: [ 4 5 10 11] low,level,sharable 0.3.0 \\_SB_.PCI0.LPC_.LNKF irq 11: [ 4 5 10 11] low,level,sharable 0.3.1 \\_SB_.PCI0.LPC_.LNKG irq 10: [ 4 5 10 11] low,level,sharable 0.3.2 \\_SB_.PCI0.LPC_.LNKH irq 5: [ 4 5 10 11] low,level,sharable 0.3.3 \\_SB_.PCI0.LPC_.LNKD irq 11: [ 3 4 5 7 9 10 11] low,level,sharable 0.4.0 \\_SB_.PCI0.LPC_.LNKC irq 9: [ 3 4 5 9 10 11] low,level,sharable 0.5.0 \\_SB_.PCI0.LPC_.LNKD irq 11: [ 3 4 5 7 9 10 11] low,level,sharable 0.5.1 \\_SB_.PCI0.LPC_.LNKD irq 11: [ 3 4 5 7 9 10 11] low,level,sharable 0.6.0 \\_SB_.PCI0.LPC_.LNKB irq 4: [ 3 4 5 7 9 10 11] low,level,sharable 0.10.0 ---- before setting priority for links ------------ ---- before fixup boot-disabled links ------------- ---- after fixup boot-disabled links -------------- ---- arbitrated configuration --------------------- \\_SB_.PCI0.LPC_.LNKA irq 3: [ 5 10 11] low,level,sharable 0.1.0 \\_SB_.PCI0.LPC_.LNKB irq 4: [ 3 4 5 7 9 10 11] low,level,sharable 0.1.1 \\_SB_.PCI0.LPC_.LNKA irq 3: [ 5 10 11] low,level,sharable 0.2.0 \\_SB_.PCI0.LPC_.LNKB irq 4: [ 3 4 5 7 9 10 11] low,level,sharable 0.2.1 \\_SB_.PCI0.LPC_.LNKC irq 9: [ 3 4 5 9 10 11] low,level,sharable 0.2.2 \\_SB_.PCI0.LPC_.LNKD irq 11: [ 3 4 5 7 9 10 11] low,level,sharable 0.2.3 \\_SB_.PCI0.LPC_.LNKE irq 9: [ 4 5 10 11] low,level,sharable 0.3.0 \\_SB_.PCI0.LPC_.LNKF irq 11: [ 4 5 10 11] low,level,sharable 0.3.1 \\_SB_.PCI0.LPC_.LNKG irq 10: [ 4 5 10 11] low,level,sharable 0.3.2 \\_SB_.PCI0.LPC_.LNKH irq 5: [ 4 5 10 11] low,level,sharable 0.3.3 \\_SB_.PCI0.LPC_.LNKD irq 11: [ 3 4 5 7 9 10 11] low,level,sharable 0.4.0 \\_SB_.PCI0.LPC_.LNKC irq 9: [ 3 4 5 9 10 11] low,level,sharable 0.5.0 \\_SB_.PCI0.LPC_.LNKD irq 11: [ 3 4 5 7 9 10 11] low,level,sharable 0.5.1 \\_SB_.PCI0.LPC_.LNKD irq 11: [ 3 4 5 7 9 10 11] low,level,sharable 0.6.0 \\_SB_.PCI0.LPC_.LNKB irq 4: [ 3 4 5 7 9 10 11] low,level,sharable 0.10.0 pci0: on pcib0 pci0: physical bus=0 map[10]: type 1, range 32, base e0000000, size 27, enabled found-> vendor=0x1039, dev=0x0646, revid=0x00 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x2210, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1039, dev=0x0001, revid=0x00 bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x63 (2970 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns) found-> vendor=0x1039, dev=0x0008, revid=0x04 bus=0, slot=2, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x000f, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type 1, range 32, base e8004000, size 12, enabled pcib0: matched entry for 0.2.INTB (source \\_SB_.PCI0.LPC_.LNKB) pcib0: slot 2 INTB is routed to irq 4 found-> vendor=0x1039, dev=0x7007, revid=0x00 bus=0, slot=2, func=3 class=0c-00-10, hdrtype=0x00, mfdev=0 cmdreg=0x0002, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x04 (1000 ns), maxlat=0x0c (3000 ns) intpin=b, irq=4 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 4, range 32, base 000001f0, size 3, enabled map[14]: type 4, range 32, base 000003f4, size 2, enabled map[18]: type 4, range 32, base 00000170, size 3, enabled map[1c]: type 4, range 32, base 00000374, size 2, enabled map[20]: type 4, range 32, base 00002400, size 4, enabled found-> vendor=0x1039, dev=0x5513, revid=0x00 bus=0, slot=2, func=5 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0x80 (3840 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 map[10]: type 4, range 32, base 00001400, size 8, enabled map[14]: type 4, range 32, base 00001080, size 7, enabled pcib0: matched entry for 0.2.INTC (source \\_SB_.PCI0.LPC_.LNKC) pcib0: slot 2 INTC is routed to irq 9 found-> vendor=0x1039, dev=0x7012, revid=0xa0 bus=0, slot=2, func=7 class=04-01-00, hdrtype=0x00, mfdev=0 cmdreg=0x0001, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0xad (5190 ns), mingnt=0x34 (13000 ns), maxlat=0x0b (2750 ns) intpin=c, irq=9 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base e8005000, size 12, enabled pcib0: matched entry for 0.3.INTA (source \\_SB_.PCI0.LPC_.LNKE) pcib0: slot 3 INTA is routed to irq 9 found-> vendor=0x1039, dev=0x7001, revid=0x0f bus=0, slot=3, func=0 class=0c-03-10, hdrtype=0x00, mfdev=1 cmdreg=0x0017, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns) intpin=a, irq=9 map[10]: type 1, range 32, base e8006000, size 12, enabled pcib0: matched entry for 0.3.INTB (source \\_SB_.PCI0.LPC_.LNKF) pcib0: slot 3 INTB is routed to irq 11 found-> vendor=0x1039, dev=0x7001, revid=0x0f bus=0, slot=3, func=1 class=0c-03-10, hdrtype=0x00, mfdev=0 cmdreg=0x0017, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns) intpin=b, irq=11 map[10]: type 1, range 32, base e8007000, size 12, enabled pcib0: matched entry for 0.3.INTC (source \\_SB_.PCI0.LPC_.LNKG) pcib0: slot 3 INTC is routed to irq 10 found-> vendor=0x1039, dev=0x7001, revid=0x0f bus=0, slot=3, func=2 class=0c-03-10, hdrtype=0x00, mfdev=0 cmdreg=0x0017, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns) intpin=c, irq=10 map[10]: type 1, range 32, base e8008000, size 12, enabled pcib0: matched entry for 0.3.INTD (source \\_SB_.PCI0.LPC_.LNKH) pcib0: slot 3 INTD is routed to irq 5 found-> vendor=0x1039, dev=0x7002, revid=0x00 bus=0, slot=3, func=3 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0002, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns) intpin=d, irq=5 powerspec 2 supports D0 D3 current D0 map[10]: type 4, range 32, base 0000f800, size 8, enabled map[14]: type 1, range 32, base e8009000, size 12, enabled pcib0: matched entry for 0.4.INTA (source \\_SB_.PCI0.LPC_.LNKD) pcib0: slot 4 INTA is routed to irq 11 found-> vendor=0x1039, dev=0x0900, revid=0x91 bus=0, slot=4, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0xad (5190 ns), mingnt=0x34 (13000 ns), maxlat=0x0b (2750 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 4, range 32, base 00001c00, size 8, enabled map[14]: type 1, range 32, base e8000000, size 14, enabled map[18]: type 1, range 32, base e8400000, size 22, enabled pcib0: matched entry for 0.5.INTA (source \\_SB_.PCI0.LPC_.LNKC) pcib0: slot 5 INTA is routed to irq 9 found-> vendor=0x14b9, dev=0xa504, revid=0x00 bus=0, slot=5, func=0 class=02-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x001b, statreg=0x0090, cachelnsz=4 (dwords) lattimer=0x40 (1920 ns), mingnt=0x04 (1000 ns), maxlat=0x04 (1000 ns) intpin=a, irq=9 powerspec 2 supports D0 D1 D2 D3 current D0 pcib0: matched entry for 0.10.INTA (source \\_SB_.PCI0.LPC_.LNKB) pcib0: slot 10 INTA is routed to irq 4 found-> vendor=0x1524, dev=0x1410, revid=0x00 bus=0, slot=10, func=0 class=06-07-00, hdrtype=0x02, mfdev=0 cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0xc0 (48000 ns), maxlat=0x03 (750 ns) intpin=a, irq=4 powerspec 1 supports D0 D1 D2 D3 current D0 agp0: mem 0xe0000000-0xe7ffffff at device 0.0 on pci0 agp0: allocating GATT for aperture of size 128M pcib1: at device 1.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0x9000-0x9fff pcib1: memory decode 0xe8800000-0xe88fffff pcib1: prefetched decode 0xf0000000-0xf7ffffff pci1: on pcib1 pci1: physical bus=1 map[10]: type 3, range 32, base f0000000, size 27, enabled map[14]: type 4, range 32, base 00009000, size 8, enabled map[18]: type 1, range 32, base e8800000, size 16, enabled pci_cfgintr: can't route an interrupt to 1:0 INTA found-> vendor=0x1002, dev=0x4c66, revid=0x01 bus=1, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0283, statreg=0x02b0, cachelnsz=4 (dwords) lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 powerspec 2 supports D0 D1 D2 D3 current D0 pci1: at device 0.0 (no driver attached) isab0: at device 2.0 on pci0 isa0: on isab0 fwohci0: vendor=1039, dev=7007 fwohci0: <1394 Open Host Controller Interface> mem 0xe8004000-0xe8004fff irq 4 at device 2.3 on pci0 fwohci0: latency timer 64 -> 64. fwohci0: cache size 0 -> 8. fwohci0: OHCI version 1.0 (ROM=1) fwohci0: No. of Isochronous channel is 4. fwohci0: EUI64 00:50:eb:1d:00:00:22:d5 fwohci0: resetting OHCI...done (loop=0) fwohci0: fwphy_rddata: loop=1, retry=0 fwohci0: fwphy_rddata: loop=1, retry=0 fwohci0: Phy 1394a available S400, 2 ports. fwohci0: fwphy_rddata: loop=1, retry=0 fwohci0: Enable 1394a Enhancements fwohci0: fwphy_rddata: loop=1, retry=0 fwohci0: fwphy_rddata: loop=1, retry=0 fwohci0: fwphy_rddata: loop=1, retry=0 fwohci0: fwphy_rddata: loop=1, retry=0 fwohci0: fwphy_rddata: loop=1, retry=0 fwohci0: Link S400, max_rec 2048 bytes. fwohci0: BUS_OPT 0xf864a002 -> 0xf864a002 fwohci0: fwohci_set_intr: 1 firewire0: on fwohci0 if_fwe0: on firewire0 if_fwe0: Fake Ethernet address: 02:50:eb:00:22:d5 fwe0: bpf attached sbp0: on firewire0 sbp_attach (cold=1) fwohci0: Initiate bus reset fwohci0: fwphy_rddata: loop=1, retry=0 fwohci0: fwphy_rddata: loop=1, retry=0 atapci0: port 0x2400-0x240f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at device 2.5 on pci0 ata0: pre reset mask=03 ostat0=50 ostat2=00 ata0-master: ATAPI 00 00 ata0-slave: ATAPI 00 00 ata0: after reset mask=03 stat0=50 stat1=00 ata0-master: ATA 01 a5 ata0: devices=01 ata0: at 0x1f0 irq 14 on atapci0 ata1: pre reset mask=03 ostat0=51 ostat2=00 ata1-master: ATAPI 14 eb ata1-slave: ATAPI 00 00 ata1: after reset mask=03 stat0=10 stat1=00 ata1: devices=04 ata1: at 0x170 irq 15 on atapci0 pci0: at device 2.7 (no driver attached) ohci0: mem 0xe8005000-0xe8005fff irq 9 at device 3.0 on pci0 usb0: OHCI version 1.0, legacy support usb0: SMM does not respond, resetting usb0: on ohci0 usb0: USB revision 1.0 uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered ohci1: mem 0xe8006000-0xe8006fff irq 11 at device 3.1 on pci0 usb1: OHCI version 1.0, legacy support usb1: SMM does not respond, resetting usb1: on ohci1 usb1: USB revision 1.0 uhub1: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered ohci2: mem 0xe8007000-0xe8007fff irq 10 at device 3.2 on pci0 usb2: OHCI version 1.0, legacy support usb2: SMM does not respond, resetting usb2: on ohci2 usb2: USB revision 1.0 uhub2: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered pci0: at device 3.3 (no driver attached) sis0: port 0xf800-0xf8ff mem 0xe8009000-0xe8009fff irq 11 at device 4.0 on pci0 sis0: Ethernet address: 00:50:eb:1d:26:b5 miibus0: on sis0 rlphy0: on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto sis0: bpf attached an0: port 0x1c00-0x1cff mem 0xe8400000-0xe87fffff,0xe8000000-0xe8003fff irq 9 at device 5.0 on pci0 an0: got RSSI <-> dBM map an0: Ethernet address: 00:07:50:d5:78:d0 an0: supported rates: 1Mbps 2Mbps 5.5Mbps 11Mbps an0: bpf attached cbb0: irq 4 at device 10.0 on pci0 cardbus0: on cbb0 pccard0: <16-bit PCCard bus> on cbb0 cbb0: PCI Configuration space: 0x00: 0x14101524 0x02100007 0x06070000 0x00022000 0x10: 0x88000000 0x020000a0 0x20000000 0xfffff000 0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 0x30: 0x00000000 0xfffffffc 0x00000000 0x0740010b 0x40: 0xb7321019 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x0c44d021 0x00000000 0x00000000 0x000c1002 0x90: 0x404482c0 0x00000000 0x00000000 0x00000000 0xa0: 0xfe010001 0x00c00100 0x00000000 0x00000009 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 0xc0: 0x00001000 0x00800080 0x10080000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 acpi_lid0: on acpi0 acpi_button0: on acpi0 unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) atkbdc0: port 0x64,0x60 irq 1 on acpi0 atkbd0: flags 0x1 irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0067 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000 psm0: unable to allocate IRQ psmcpnp0 irq 12 on acpi0 psm0: current command byte:0067 psm0: irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons psm0: config:00000000, flags:00000000, packet size:3 psm0: syncmask:c0, syncbits:00 acpi_ec0: port 0x66,0x62 on acpi0 acpi_acad0: on acpi0 acpi_cmbat0: on acpi0 unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 ex_isa_identify() sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: : integer, : float, : "True"/"False", ### : "String", : " Hz/kHz/MHz" ### [arg]: arg optional #Option "NoAccel" # [] #Option "SWcursor" # [] #Option "Dac6Bit" # [] #Option "Dac8Bit" # [] #Option "ForcePCIMode" # [] #Option "CPPIOMode" # [] #Option "CPusecTimeout" # #Option "AGPMode" # #Option "AGPFastWrite" # [] #Option "AGPSize" # #Option "RingSize" # #Option "BufferSize" # #Option "EnableDepthMoves" # [] #Option "EnablePageFlip" # [] #Option "NoBackBuffer" # [] #Option "PanelOff" # [] #Option "DDCMode" # [] #Option "CloneDisplay" # #Option "CloneMode" # [] #Option "CloneHSync" # [] #Option "CloneVRefresh" # [] #Option "UseFBDev" # [] #Option "VideoKey" # Identifier "Card0" Driver "ati" VendorName "ATI Technologies Inc" BoardName "Radeon Mobility M7 LW [Radeon Mobility 7500]" BusID "PCI:1:0:0" EndSection Section "Screen" Identifier "Screen0" Device "Card0" Monitor "Monitor0" DefaultDepth 24 SubSection "Display" Depth 1 EndSubSection SubSection "Display" Depth 4 EndSubSection SubSection "Display" Depth 8 EndSubSection SubSection "Display" Depth 15 EndSubSection SubSection "Display" Depth 16 EndSubSection SubSection "Display" Depth 24 Modes "1600x1200" EndSubSection EndSection ############# ### dmesg ############# FreeBSD 5.1-RELEASE #1: Tue Jun 10 01:16:10 PDT 2003 root@laptop:/usr/obj/usr/src/sys/LAPTOP Preloaded elf kernel "/boot/kernel/kernel" at 0xc0539000. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0539294. Timecounter "i8254" frequency 1193182 Hz Timecounter "TSC" frequency 1590817532 Hz CPU: Intel(R) Pentium(R) 4 Mobile CPU 1.60GHz (1590.82-MHz 686-class = CPU) Origin =3D "GenuineIntel" Id =3D 0xf24 Stepping =3D 4 =20 Features=3D0x3febf9ff real memory =3D 536346624 (511 MB) avail memory =3D 515182592 (491 MB) Pentium Pro MTRR support enabled VESA: v2.0, 32768k memory, flags:0x1, mode table:0xc04526c2 (1000022) VESA: ATI MOBILITY RADEON 7500 npx0: on motherboard npx0: INT 16 interface acpi0: on motherboard pcibios: BIOS version 2.10 Using $PIR table, 7 entries at 0xc00fdf50 ACPI-0351: *** Error: Could not install PciConfig handler for PCI0, AE_ALREADY_EXISTS ACPI-0351: *** Error: Could not install PciConfig handler for PCI0, AE_ALREADY_EXISTS ACPI-0351: *** Error: Could not install PciConfig handler for PCI0, AE_ALREADY_EXISTS Timecounter "ACPI-fast" frequency 3579545 Hz ACPI-0351: *** Error: Could not install PciConfig handler for PCI0, AE_ALREADY_EXISTS acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 acpi_cpu0: port 0x530-0x537 on acpi0 acpi_tz0: port 0x530-0x537 on acpi0 acpi_lid0: on acpi0 acpi_button0: on acpi0 pcib0: port 0xcf8-0xcff on acpi0 pci0: on pcib0 pcib0: slot 29 INTA is routed to irq 9 pcib0: slot 29 INTB is routed to irq 9 pcib0: possible interrupts: 9 pcib0: slot 31 INTB routed to irq 9 via \\_SB_.LNKB agp0: mem 0xec000000-0xefffffff at = device 0.0 on pci0 pcib1: at device 1.0 on pci0 pci1: on pcib1 pcib1: slot 0 INTA is routed to irq 9 drm0: port 0x3000-0x30ff mem 0xe8100000-0xe810ffff,0xf0000000-0xf7ffffff irq 9 at device 0.0 on pci1 info: [drm] AGP at 0xec000000 64MB info: [drm] Initialized radeon 1.8.0 20020828 on minor 0 uhci0: port = 0x1800-0x181f irq 9 at device 29.0 on pci0 usb0: on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: port = 0x1820-0x183f irq 9 at device 29.1 on pci0 usb1: on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered ums0: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM), rev = 1.10/3.00, addr 2, iclass 3/1 ums0: 5 buttons and Z dir. uhci2: port = 0x1840-0x185f at device 29.2 on pci0 pcib0: possible interrupts: 9 pcib0: slot 29 INTC routed to irq 9 via \\_SB_.LNKC usb2: on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered ugen0: Sony USB Memory Stick Slot, rev 1.10/1.07, addr 2 pcib2: at device 30.0 on pci0 pci2: on pcib2 pcib2: possible interrupts: 9 pcib2: slot 5 INTA routed to irq 9 via \\_SB_.LNKF pcib2: slot 8 INTA is routed to irq 9 cbb0: irq 9 at device 5.0 on pci2 start (88000000) < sc->membase (e8200000) end (ffffffff) > sc->memlimit (e82fffff) cardbus0: on cbb0 pccard0: <16-bit PCCard bus> on cbb0 cbb1: at device 5.1 on pci2 start (88000000) < sc->membase (e8200000) end (ffffffff) > sc->memlimit (e82fffff) cardbus1: on cbb1 pccard1: <16-bit PCCard bus> on cbb1 pcib2: possible interrupts: 9 pcib2: slot 5 INTB routed to irq 9 via \\_SB_.LNKG fwohci0: mem 0xe8201000-0xe82017ff at device 5.2 on pci2 pcib2: possible interrupts: 9 pcib2: slot 5 INTC routed to irq 9 via \\_SB_.LNKH fwohci0: OHCI version 1.0 (ROM=3D1) fwohci0: No. of Isochronous channel is 4. fwohci0: EUI64 08:00:46:03:01:0b:83:4d fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: on fwohci0 sbp0: on firewire0 if_fwe0: on firewire0 if_fwe0: Fake Ethernet address: 0a:00:46:0b:83:4d fwohci0: Initiate bus reset fxp0: port 0x4000-0x403f mem 0xe8200000-0xe8200fff irq 9 at device 8.0 on pci2 fxp0: Ethernet address 08:00:46:51:a4:b2 miibus0: on fxp0 inphy0: on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto isab0: at device 31.0 on pci0 isa0: on isab0 atapci0: port 0x1860-0x186f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 mem 0xe8000000-0xe80003ff at device 31.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 pci0: at device 31.3 (no driver attached) pcm0: port 0x18c0-0x18ff,0x1c00-0x1cff irq 9 at device 31.5 on pci0 pcm0: pci0: at device 31.6 (no driver attached) atkbdc0: port 0x64,0x60 irq 1 on acpi0 atkbd0: flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0 acpi_ec0: port 0x66,0x62 on acpi0 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A ppc0 port 0x778-0x77f,0x378-0x37f irq 7 drq 3 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/15 bytes threshold ppbus0: on ppc0 ppi0: on ppbus0 lpt0: on ppbus0 lpt0: Interrupt-driven port acpi_cmbat0: on acpi0 acpi_cmbat1: on acpi0 acpi_acad0: on acpi0 orm0: