From owner-freebsd-multimedia@FreeBSD.ORG Sun Jun 6 08:05:27 2010 Return-Path: Delivered-To: multimedia@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id D35111065672 for ; Sun, 6 Jun 2010 08:05:27 +0000 (UTC) (envelope-from SamanKaya@netscape.net) Received: from imr-da02.mx.aol.com (imr-da02.mx.aol.com [205.188.105.144]) by mx1.freebsd.org (Postfix) with ESMTP id 986C68FC08 for ; Sun, 6 Jun 2010 08:05:27 +0000 (UTC) Received: from mtaout-ma05.r1000.mx.aol.com (mtaout-ma05.r1000.mx.aol.com [172.29.41.5]) by imr-da02.mx.aol.com (8.14.1/8.14.1) with ESMTP id o5685PtX029405 for ; Sun, 6 Jun 2010 04:05:25 -0400 Received: from [172.16.0.66] (unknown [212.156.209.87]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (No client certificate requested) by mtaout-ma05.r1000.mx.aol.com (MUA/Third Party Client Interface) with ESMTPSA id 69CF7E0000BB for ; Sun, 6 Jun 2010 04:05:23 -0400 (EDT) Message-ID: <4C0B56BF.1020908@netscape.net> Date: Sun, 06 Jun 2010 11:05:19 +0300 From: Kaya Saman User-Agent: Mozilla/5.0 (X11; U; Linux i686 (x86_64); en-US; rv:1.9.1.8) Gecko/20100227 Lightning/1.0b1 Thunderbird/3.0.3 MIME-Version: 1.0 To: multimedia@freebsd.org Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit x-aol-global-disposition: G X-AOL-SCOLL-SCORE: 0:2:471637280:93952408 X-AOL-SCOLL-URL_COUNT: 0 x-aol-sid: 3039ac1d29054c0b56c3548d X-AOL-IP: 212.156.209.87 Cc: Subject: Setting audio input source for Darkice using mixer: can't set vol?? X-BeenThere: freebsd-multimedia@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: Multimedia discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 06 Jun 2010 08:05:27 -0000 Hi, am trying to set pcm or vol as the input source for my mixer in order to be used in conjunction with Darkice. For Darkice I have already set input as /dev/dsp which should be ok as /dev/dsp0.0 comes up when using ls /dev..... however, I had this config working on another box so from what I can tell the 0.0 just gives the amount of simultaneous channels if I'm not mistaken. The major difficulty however is coming from the fact that I can't set the rec input to be pcm or vol :-( pciconf -lv shows this: hdac0@pci0:0:27:0: class=0x040300 card=0x50038086 chip=0x3a3e8086 rev=0x00 hdr=0x00 vendor = 'Intel Corporation' device = 'HD Audio Controller' class = multimedia subclass = HDA and as both Andrew Thompson and Frank Shute helped me last time getting: snd_hda_load="YES" into /boot/loader.conf audio works without any problem too as have tested playback!! If I try to set: # mixer =rec vol mixer: unknown recording device: vol usage: mixer [-f device] [-s | -S] [dev [+|-][voll[:[+|-]volr]] ... mixer [-f device] [-s | -S] recsrc ... mixer [-f device] [-s | -S] {^|+|-|=}rec rdev ... devices: vol, pcm, speaker, mic, mix, rec rec devices: mic, mix I just get that the rec interfaces are mic or mix?? This is not the same as my other box using a different and much older integral sound chip. I also attempted to comment the snd_hda_load out of /boot/loader.conf and include this instead: snd_driver_load="YES" which basically did the same thing as the above with (so also a small question here about which line is better?) so yeah am stuck with both kernel module loaders providing the same output :-( Is there a way other then feeding a cable from the output into the input to rectify this issue?? Thanks, Kaya From owner-freebsd-multimedia@FreeBSD.ORG Mon Jun 7 08:40:18 2010 Return-Path: Delivered-To: freebsd-multimedia@hub.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id AB25C1065674; Mon, 7 Jun 2010 08:40:18 +0000 (UTC) (envelope-from edwin@FreeBSD.org) Received: from freefall.freebsd.org (unknown [IPv6:2001:4f8:fff6::28]) by mx1.freebsd.org (Postfix) with ESMTP id 824888FC0A; Mon, 7 Jun 2010 08:40:18 +0000 (UTC) Received: from freefall.freebsd.org (localhost [127.0.0.1]) by freefall.freebsd.org (8.14.4/8.14.4) with ESMTP id o578eIjK071476; Mon, 7 Jun 2010 08:40:18 GMT (envelope-from edwin@freefall.freebsd.org) Received: (from edwin@localhost) by freefall.freebsd.org (8.14.4/8.14.4/Submit) id o578eIHm071472; Mon, 7 Jun 2010 08:40:18 GMT (envelope-from edwin) Date: Mon, 7 Jun 2010 08:40:18 GMT Message-Id: <201006070840.o578eIHm071472@freefall.freebsd.org> To: edwin@FreeBSD.org, freebsd-ports-bugs@FreeBSD.org, freebsd-multimedia@FreeBSD.org From: edwin@FreeBSD.org Cc: Subject: Re: ports/147640: [PATCH] multimedia/mkvtoolnix: use += for setting CPPFLAGS and LDFLAGS X-BeenThere: freebsd-multimedia@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: Multimedia discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 07 Jun 2010 08:40:18 -0000 Synopsis: [PATCH] multimedia/mkvtoolnix: use += for setting CPPFLAGS and LDFLAGS Responsible-Changed-From-To: freebsd-ports-bugs->freebsd-multimedia Responsible-Changed-By: edwin Responsible-Changed-When: Mon Jun 7 08:40:18 UTC 2010 Responsible-Changed-Why: Over to maintainer (via the GNATS Auto Assign Tool) http://www.freebsd.org/cgi/query-pr.cgi?pr=147640 From owner-freebsd-multimedia@FreeBSD.ORG Mon Jun 7 08:50:41 2010 Return-Path: Delivered-To: multimedia@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id E558B1065673; Mon, 7 Jun 2010 08:50:41 +0000 (UTC) (envelope-from avg@pautina.in.ua) Received: from smtp.pautina-nau.net (smtp.pautina-nau.net [194.0.89.243]) by mx1.freebsd.org (Postfix) with ESMTP id A11A88FC1E; Mon, 7 Jun 2010 08:50:41 +0000 (UTC) Received: from [92.249.64.71] (helo=trant.local.) by smtp.pautina-nau.net with esmtps (TLS1.0:DHE_RSA_AES_256_CBC_SHA1:32) (Exim 4.69) (envelope-from ) id 1OLY2a-0001Hl-Mj; Mon, 07 Jun 2010 11:50:40 +0300 Received: from trant.local. (localhost [127.0.0.1]) by trant.local. (8.14.4/8.14.4) with ESMTP id o578oe5g078060; Mon, 7 Jun 2010 11:50:40 +0300 (EEST) (envelope-from avg@trant.local) Received: (from root@localhost) by trant.local. (8.14.4/8.14.4/Submit) id o578oe6Q078059; Mon, 7 Jun 2010 11:50:40 +0300 (EEST) (envelope-from avg) Date: Mon, 7 Jun 2010 11:50:40 +0300 (EEST) Message-Id: <201006070850.o578oe6Q078059@trant.local.> To: FreeBSD-gnats-submit@freebsd.org From: Andriy Gapon X-send-pr-version: 3.113 X-GNATS-Notify: X-Sender-IP: 92.249.64.71 X-Sender-User: unknown Cc: multimedia@freebsd.org Subject: [PATCH] multimedia/mkvtoolnix: fix compilation with gcc44 X-BeenThere: freebsd-multimedia@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: Multimedia discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 07 Jun 2010 08:50:42 -0000 >Submitter-Id: current-users >Originator: Andriy Gapon >Organization: >Confidential: no >Synopsis: [PATCH] multimedia/mkvtoolnix: fix compilation with gcc44 >Severity: non-critical >Priority: low >Category: ports >Class: change-request >Release: FreeBSD 9.0-CURRENT amd64 >Environment: >Description: I am trying to use lang/gcc44 to build as much of my ports as possible. Many ports including this one have problems outlined here: http://gcc.gnu.org/gcc-4.3/porting_to.html under section "Header dependency cleanup" Added file(s): - files/patch-src_common_strings_editing.h Port maintainer (multimedia@FreeBSD.org) is cc'd. Generated with FreeBSD Port Tools 0.99 Patchfile created via update-patches target. Testing note: To test this change a patch from ports/147639 is need as a prerequisite and LDFLAGS should have -Wl,-rpath-link=/usr/local/lib/gcc44:/lib:/usr/lib in them. Otherwise configure target would not succeed. This is because software's configure script uses C compiler (gcc44) to link a program with a shared library compiled from C++ code. This works only by chance with a base compiler. >How-To-Repeat: >Fix: --- mkvtoolnix-3.3.0_2.patch begins here --- diff -ruN --exclude=CVS /usr/ports/multimedia/mkvtoolnix.orig/files/patch-src_common_strings_editing.h /usr/ports/multimedia/mkvtoolnix/files/patch-src_common_strings_editing.h --- /usr/ports/multimedia/mkvtoolnix.orig/files/patch-src_common_strings_editing.h 1970-01-01 03:00:00.000000000 +0300 +++ /usr/ports/multimedia/mkvtoolnix/files/patch-src_common_strings_editing.h 2010-06-07 11:43:38.995345630 +0300 @@ -0,0 +1,10 @@ +--- src/common/strings/editing.h.orig 2010-06-07 11:37:20.115133180 +0300 ++++ src/common/strings/editing.h 2010-06-07 11:37:40.477006374 +0300 +@@ -16,6 +16,7 @@ + + #include "common/os.h" + ++#include + #include + #include + --- mkvtoolnix-3.3.0_2.patch ends here --- From owner-freebsd-multimedia@FreeBSD.ORG Mon Jun 7 08:53:28 2010 Return-Path: Delivered-To: multimedia@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 0549A1065677 for ; Mon, 7 Jun 2010 08:53:28 +0000 (UTC) (envelope-from avg@pautina.in.ua) Received: from smtp.pautina-nau.net (smtp.pautina-nau.net [194.0.89.243]) by mx1.freebsd.org (Postfix) with ESMTP id B4D688FC22 for ; Mon, 7 Jun 2010 08:53:27 +0000 (UTC) Received: from [92.249.64.71] (helo=trant.local.) by smtp.pautina-nau.net with esmtps (TLS1.0:DHE_RSA_AES_256_CBC_SHA1:32) (Exim 4.69) (envelope-from ) id 1OLXpA-0001AK-Mc; Mon, 07 Jun 2010 11:36:48 +0300 Received: from trant.local. (localhost [127.0.0.1]) by trant.local. (8.14.4/8.14.4) with ESMTP id o578amIP069749; Mon, 7 Jun 2010 11:36:48 +0300 (EEST) (envelope-from avg@trant.local) Received: (from root@localhost) by trant.local. (8.14.4/8.14.4/Submit) id o578amrC069748; Mon, 7 Jun 2010 11:36:48 +0300 (EEST) (envelope-from avg) Date: Mon, 7 Jun 2010 11:36:48 +0300 (EEST) Message-Id: <201006070836.o578amrC069748@trant.local.> To: FreeBSD-gnats-submit@freebsd.org From: Andriy Gapon X-send-pr-version: 3.113 X-GNATS-Notify: X-Remote-Sender-IP: 92.249.64.71 X-Remote-Sender-User: unknown Cc: multimedia@freebsd.org Subject: [PATCH] multimedia/mkvtoolnix: use += for setting CPPFLAGS and LDFLAGS X-BeenThere: freebsd-multimedia@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: Multimedia discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 07 Jun 2010 08:53:28 -0000 >Submitter-Id: current-users >Originator: Andriy Gapon >Organization: >Confidential: no >Synopsis: [PATCH] multimedia/mkvtoolnix: use += for setting CPPFLAGS and LDFLAGS >Severity: non-critical >Priority: low >Category: ports >Class: change-request >Release: FreeBSD 9.0-CURRENT amd64 >Environment: >Description: Right now this port simply sets CPPFLAGS and LDFLAGS thus overriding any local tuning that a user might want to do via e.g. /etc/make.conf. I think that in general it is recommended that CPPFLAGS, LDFLAGS, etc are amended, not overridden, in ports Makefiles. Port maintainer (multimedia@FreeBSD.org) is cc'd. Generated with FreeBSD Port Tools 0.99 >How-To-Repeat: >Fix: --- mkvtoolnix-3.3.0_2.patch begins here --- diff -ruN --exclude=CVS /usr/ports/multimedia/mkvtoolnix.orig/Makefile /usr/ports/multimedia/mkvtoolnix/Makefile --- /usr/ports/multimedia/mkvtoolnix.orig/Makefile 2010-06-06 23:43:58.000000000 +0300 +++ /usr/ports/multimedia/mkvtoolnix/Makefile 2010-06-07 11:33:29.069800315 +0300 @@ -28,8 +28,8 @@ USE_GMAKE= yes USE_ICONV= yes GNU_CONFIGURE= yes -CPPFLAGS= -I${LOCALBASE}/include -LDFLAGS= -L${LOCALBASE}/lib +CPPFLAGS+= -I${LOCALBASE}/include +LDFLAGS+= -L${LOCALBASE}/lib CONFIGURE_ENV= CPPFLAGS="${CPPFLAGS}" LDFLAGS="${LDFLAGS}" \ ac_cv_path_PO4A=no CONFIGURE_ARGS= --enable-lzo --enable-bz2 --disable-qt \ --- mkvtoolnix-3.3.0_2.patch ends here --- From owner-freebsd-multimedia@FreeBSD.ORG Mon Jun 7 09:00:28 2010 Return-Path: Delivered-To: freebsd-multimedia@hub.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 9361A106566B; Mon, 7 Jun 2010 09:00:28 +0000 (UTC) (envelope-from edwin@FreeBSD.org) Received: from freefall.freebsd.org (unknown [IPv6:2001:4f8:fff6::28]) by mx1.freebsd.org (Postfix) with ESMTP id 6AC4A8FC1A; Mon, 7 Jun 2010 09:00:28 +0000 (UTC) Received: from freefall.freebsd.org (localhost [127.0.0.1]) by freefall.freebsd.org (8.14.4/8.14.4) with ESMTP id o5790SgE087211; Mon, 7 Jun 2010 09:00:28 GMT (envelope-from edwin@freefall.freebsd.org) Received: (from edwin@localhost) by freefall.freebsd.org (8.14.4/8.14.4/Submit) id o5790SLk087202; Mon, 7 Jun 2010 09:00:28 GMT (envelope-from edwin) Date: Mon, 7 Jun 2010 09:00:28 GMT Message-Id: <201006070900.o5790SLk087202@freefall.freebsd.org> To: edwin@FreeBSD.org, freebsd-ports-bugs@FreeBSD.org, freebsd-multimedia@FreeBSD.org From: edwin@FreeBSD.org Cc: Subject: Re: ports/147643: [PATCH] multimedia/mkvtoolnix: fix compilation with gcc44 X-BeenThere: freebsd-multimedia@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: Multimedia discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 07 Jun 2010 09:00:28 -0000 Synopsis: [PATCH] multimedia/mkvtoolnix: fix compilation with gcc44 Responsible-Changed-From-To: freebsd-ports-bugs->freebsd-multimedia Responsible-Changed-By: edwin Responsible-Changed-When: Mon Jun 7 09:00:27 UTC 2010 Responsible-Changed-Why: Over to maintainer (via the GNATS Auto Assign Tool) http://www.freebsd.org/cgi/query-pr.cgi?pr=147643 From owner-freebsd-multimedia@FreeBSD.ORG Mon Jun 7 09:10:48 2010 Return-Path: Delivered-To: freebsd-multimedia@hub.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 7E05F1065676; Mon, 7 Jun 2010 09:10:48 +0000 (UTC) (envelope-from miwi@FreeBSD.org) Received: from freefall.freebsd.org (unknown [IPv6:2001:4f8:fff6::28]) by mx1.freebsd.org (Postfix) with ESMTP id 55C948FC08; Mon, 7 Jun 2010 09:10:48 +0000 (UTC) Received: from freefall.freebsd.org (localhost [127.0.0.1]) by freefall.freebsd.org (8.14.4/8.14.4) with ESMTP id o579AlD7000704; Mon, 7 Jun 2010 09:10:48 GMT (envelope-from miwi@freefall.freebsd.org) Received: (from miwi@localhost) by freefall.freebsd.org (8.14.4/8.14.4/Submit) id o579Alsx000694; Mon, 7 Jun 2010 09:10:47 GMT (envelope-from miwi) Date: Mon, 7 Jun 2010 09:10:47 GMT Message-Id: <201006070910.o579Alsx000694@freefall.freebsd.org> To: miwi@FreeBSD.org, freebsd-multimedia@FreeBSD.org, miwi@FreeBSD.org From: miwi@FreeBSD.org Cc: Subject: Re: ports/147640: [PATCH] multimedia/mkvtoolnix: use += for setting CPPFLAGS and LDFLAGS X-BeenThere: freebsd-multimedia@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: Multimedia discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 07 Jun 2010 09:10:48 -0000 Synopsis: [PATCH] multimedia/mkvtoolnix: use += for setting CPPFLAGS and LDFLAGS Responsible-Changed-From-To: freebsd-multimedia->miwi Responsible-Changed-By: miwi Responsible-Changed-When: Mon Jun 7 09:10:47 UTC 2010 Responsible-Changed-Why: I'll take it. http://www.freebsd.org/cgi/query-pr.cgi?pr=147640 From owner-freebsd-multimedia@FreeBSD.ORG Mon Jun 7 09:10:51 2010 Return-Path: Delivered-To: freebsd-multimedia@hub.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 851941065673; Mon, 7 Jun 2010 09:10:51 +0000 (UTC) (envelope-from miwi@FreeBSD.org) Received: from freefall.freebsd.org (unknown [IPv6:2001:4f8:fff6::28]) by mx1.freebsd.org (Postfix) with ESMTP id 5CFAF8FC0A; Mon, 7 Jun 2010 09:10:51 +0000 (UTC) Received: from freefall.freebsd.org (localhost [127.0.0.1]) by freefall.freebsd.org (8.14.4/8.14.4) with ESMTP id o579ApDW001212; Mon, 7 Jun 2010 09:10:51 GMT (envelope-from miwi@freefall.freebsd.org) Received: (from miwi@localhost) by freefall.freebsd.org (8.14.4/8.14.4/Submit) id o579Ap0h001208; Mon, 7 Jun 2010 09:10:51 GMT (envelope-from miwi) Date: Mon, 7 Jun 2010 09:10:51 GMT Message-Id: <201006070910.o579Ap0h001208@freefall.freebsd.org> To: miwi@FreeBSD.org, freebsd-multimedia@FreeBSD.org, miwi@FreeBSD.org From: miwi@FreeBSD.org Cc: Subject: Re: ports/147643: [PATCH] multimedia/mkvtoolnix: fix compilation with gcc44 X-BeenThere: freebsd-multimedia@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: Multimedia discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 07 Jun 2010 09:10:51 -0000 Synopsis: [PATCH] multimedia/mkvtoolnix: fix compilation with gcc44 Responsible-Changed-From-To: freebsd-multimedia->miwi Responsible-Changed-By: miwi Responsible-Changed-When: Mon Jun 7 09:10:50 UTC 2010 Responsible-Changed-Why: I'll take it. http://www.freebsd.org/cgi/query-pr.cgi?pr=147643 From owner-freebsd-multimedia@FreeBSD.ORG Mon Jun 7 11:07:00 2010 Return-Path: Delivered-To: freebsd-multimedia@FreeBSD.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 5D38A1065694 for ; Mon, 7 Jun 2010 11:07:00 +0000 (UTC) (envelope-from owner-bugmaster@FreeBSD.org) Received: from freefall.freebsd.org (unknown [IPv6:2001:4f8:fff6::28]) by mx1.freebsd.org (Postfix) with ESMTP id 4B1958FC1C for ; Mon, 7 Jun 2010 11:07:00 +0000 (UTC) Received: from freefall.freebsd.org (localhost [127.0.0.1]) by freefall.freebsd.org (8.14.4/8.14.4) with ESMTP id o57B70RJ008714 for ; Mon, 7 Jun 2010 11:07:00 GMT (envelope-from owner-bugmaster@FreeBSD.org) Received: (from gnats@localhost) by freefall.freebsd.org (8.14.4/8.14.4/Submit) id o57B6xEc008712 for freebsd-multimedia@FreeBSD.org; Mon, 7 Jun 2010 11:06:59 GMT (envelope-from owner-bugmaster@FreeBSD.org) Date: Mon, 7 Jun 2010 11:06:59 GMT Message-Id: <201006071106.o57B6xEc008712@freefall.freebsd.org> X-Authentication-Warning: freefall.freebsd.org: gnats set sender to owner-bugmaster@FreeBSD.org using -f From: FreeBSD bugmaster To: freebsd-multimedia@FreeBSD.org Cc: Subject: Current problem reports assigned to freebsd-multimedia@FreeBSD.org X-BeenThere: freebsd-multimedia@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: Multimedia discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 07 Jun 2010 11:07:00 -0000 Note: to view an individual PR, use: http://www.freebsd.org/cgi/query-pr.cgi?pr=(number). The following is a listing of current problems submitted by FreeBSD users. These represent problem reports covering all versions including experimental development code and obsolete releases. S Tracker Resp. Description -------------------------------------------------------------------------------- o kern/147504 multimedia [oss] [panic] panic: dev_pager_getpage: map function r o kern/147466 multimedia [snd_hda] [patch] Thinkpad t510, codecs not recognized o kern/146758 multimedia [sound] [patch] fix volume control in spicds o kern/146031 multimedia [snd_hda] race condition when kldunload snd_hda sound f ports/145770 multimedia [patch] multimedia/gstreamer-plugins-v4l2 says Device o kern/144659 multimedia [pcm] The distortion of the sound playback of music at o kern/143505 multimedia [pcm] FreeBSD 8.0-RELEASE (x64) won't make sound card o kern/141826 multimedia [snd_hda] load of snd_hda module fails o kern/140591 multimedia [PATCH][sound] No sound output on lineout/headphone ja o kern/140453 multimedia [sound] No sound inside Virtualbox on 50% volume o kern/137589 multimedia [snd_uaudio] snd_uaudio.ko (USB audio driver) doesn't o kern/134767 multimedia [sound] [snd_hda] [regression] Sigmatel STAC9205X no s o kern/132848 multimedia [sound] [snd_emu10kx] driver problem with card init, s o kern/132511 multimedia [sound] [snd_hda] Probing ALC888 codec on ASRock K10N7 o kern/129604 multimedia [sound] Sound stops with error: pcm0:virtual:dsp0.vp0: o kern/127131 multimedia [bktr] /usr/src/sys/dev/bktr/bktr_os.c, line 469: wron s kern/125756 multimedia [sound] [patch] cannot detect soft-modem on HDA bus o kern/124319 multimedia [sound] [snd_emu10k1] [regression] Cannot record from o kern/122086 multimedia [sound] maestro sound driver is working, but mixer ini p kern/121156 multimedia [sound] [patch] Turn on inverted external amplifier se o kern/120857 multimedia [sound] [snd_emu10k1] snd_emu10k1 driver issues a warn o kern/120780 multimedia [sound] [snd_hda] snd_hda doesn't work on Dell Latitut o kern/119973 multimedia [sound] [snd_maestro] [regression] snd_maestro only wo o kern/119931 multimedia [sound] No sound card detected on ASUS "K8V-X SE R2.00 o kern/119759 multimedia [sound] [snd_emu10k1] [regression] Can not record anyt f kern/115666 multimedia [sound] Microphone does not work o kern/115300 multimedia [sound] [snd_hda] [regression] snd_hda(4) fails to att o kern/114760 multimedia [sound] [snd_cmi] snd_cmi driver causing sporadic syst s kern/113950 multimedia [sound] [patch] [request] add per-vchan mixer support o kern/111767 multimedia [sound] ATI SB450 High Definition Audio Controller sou o kern/107516 multimedia [sound] [snd_emu10k1] - skips, clicks and lag after a o kern/107051 multimedia [sound] only 2 channels output works for the ALC850 (o o kern/104874 multimedia [sound] [snd_emu10k1] kldload snd_emu10k1 hangs system o kern/104626 multimedia [sound] FreeBSD 6.2 does not support SoundBlaster Audi o kern/101417 multimedia [sound] 4-speakers output not possible on Asus A8V-Del o kern/100859 multimedia [sound] [snd_ich] snd_ich broken on GIGABYTE 915 syste o kern/98752 multimedia [sound] Intel ich6 82801 FB - on Packard Bell A8810 la o kern/98504 multimedia [sound] Sound is distorted with SB Live 5.1 o kern/98496 multimedia [sound] [snd_ich] some functions don't work in my soun o kern/97609 multimedia [sound] Load Sound Module - VIA8233 - fails o kern/97535 multimedia [sound] [snd_mss] doesn't work in 6.0-RELEASE and abov o kern/96538 multimedia [sound] emu10k1-driver inverts channels o kern/95086 multimedia [sound] uaudio line in problem with sbdm lx o kern/94279 multimedia [sound] [snd_neomagic] snd_neomagic crashes on FreeBSD o kern/93986 multimedia [sound] Acer TravelMate 4652LMi pcm0 channel dead o kern/92512 multimedia [sound] distorted mono output with emu10k1 o kern/87782 multimedia [sound] snd_t4dwave and pcm0:record:0: record interrup s kern/83697 multimedia [sound] [snd_mss] [patch] support, docs added for full o kern/82043 multimedia [sound] snd_emu10k1 - mixer does not work. o kern/81146 multimedia [sound] Sound isn't working AT ALL for Sis7012 onboard o kern/80632 multimedia [sound] pcm driver missing support for CMI8738 auxilla o kern/79912 multimedia [sound] sound broken for 2 VIA chipsets: interrupt sto o kern/79905 multimedia [sound] sis7018 sound module problem o kern/79678 multimedia [sound] sound works except recording from any source f kern/72995 multimedia [sound] Intel ICH2 (82801BA) - sound nearly inaudible o kern/63204 multimedia [sound] /dev/mixer broken with ESS Maestro-2E (still o o kern/60677 multimedia [sound] [patch] No reaction of volume controy key on I s kern/60599 multimedia [bktr] [partial patch] No sound for ATI TV Wonder (ste o kern/37600 multimedia [sound] [partial patch] t4dwave drive doesn't record. o kern/23546 multimedia [sound] [snd_csa] [patch] csa DMA-interrupt problem 60 problems total. From owner-freebsd-multimedia@FreeBSD.ORG Mon Jun 7 12:40:03 2010 Return-Path: Delivered-To: freebsd-multimedia@hub.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 725531065670 for ; Mon, 7 Jun 2010 12:40:03 +0000 (UTC) (envelope-from gnats@FreeBSD.org) Received: from freefall.freebsd.org (unknown [IPv6:2001:4f8:fff6::28]) by mx1.freebsd.org (Postfix) with ESMTP id 48D658FC1D for ; Mon, 7 Jun 2010 12:40:03 +0000 (UTC) Received: from freefall.freebsd.org (localhost [127.0.0.1]) by freefall.freebsd.org (8.14.4/8.14.4) with ESMTP id o57Ce3DQ092225 for ; Mon, 7 Jun 2010 12:40:03 GMT (envelope-from gnats@freefall.freebsd.org) Received: (from gnats@localhost) by freefall.freebsd.org (8.14.4/8.14.4/Submit) id o57Ce3Q3092224; Mon, 7 Jun 2010 12:40:03 GMT (envelope-from gnats) Date: Mon, 7 Jun 2010 12:40:03 GMT Message-Id: <201006071240.o57Ce3Q3092224@freefall.freebsd.org> To: freebsd-multimedia@FreeBSD.org From: Henry Hu Cc: Subject: Re: ports/145770: [patch] multimedia/gstreamer-plugins-v4l2 says Device not configured X-BeenThere: freebsd-multimedia@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: Henry Hu List-Id: Multimedia discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 07 Jun 2010 12:40:03 -0000 The following reply was made to PR ports/145770; it has been noted by GNATS. From: Henry Hu To: bug-followup@freebsd.org, henry.hu.sh@gmail.com Cc: Subject: Re: ports/145770: [patch] multimedia/gstreamer-plugins-v4l2 says Device not configured Date: Mon, 7 Jun 2010 20:37:25 +0800 My webcam went wrong after the last post. After I fixed it and upgraded to new version of drivers(cuse4bsd 0.1.9, webcamd 0.1.14), the new problem also disappeared.... Sorry for the inconvenience, and please close this PR. -- Cheers, Henry From owner-freebsd-multimedia@FreeBSD.ORG Mon Jun 7 17:52:34 2010 Return-Path: Delivered-To: freebsd-multimedia@hub.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 38E8A1065672; Mon, 7 Jun 2010 17:52:34 +0000 (UTC) (envelope-from stefan@FreeBSD.org) Received: from freefall.freebsd.org (unknown [IPv6:2001:4f8:fff6::28]) by mx1.freebsd.org (Postfix) with ESMTP id 0F6BE8FC13; Mon, 7 Jun 2010 17:52:34 +0000 (UTC) Received: from freefall.freebsd.org (localhost [127.0.0.1]) by freefall.freebsd.org (8.14.4/8.14.4) with ESMTP id o57HqXEe065553; Mon, 7 Jun 2010 17:52:33 GMT (envelope-from stefan@freefall.freebsd.org) Received: (from stefan@localhost) by freefall.freebsd.org (8.14.4/8.14.4/Submit) id o57HqXou065549; Mon, 7 Jun 2010 17:52:33 GMT (envelope-from stefan) Date: Mon, 7 Jun 2010 17:52:33 GMT Message-Id: <201006071752.o57HqXou065549@freefall.freebsd.org> To: henry.hu.sh@gmail.com, stefan@FreeBSD.org, freebsd-multimedia@FreeBSD.org From: stefan@FreeBSD.org Cc: Subject: Re: ports/145770: [patch] multimedia/gstreamer-plugins-v4l2 says Device not configured X-BeenThere: freebsd-multimedia@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: Multimedia discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 07 Jun 2010 17:52:34 -0000 Synopsis: [patch] multimedia/gstreamer-plugins-v4l2 says Device not configured State-Changed-From-To: feedback->closed State-Changed-By: stefan State-Changed-When: Mon Jun 7 17:51:55 UTC 2010 State-Changed-Why: Closed on submitter's request. http://www.freebsd.org/cgi/query-pr.cgi?pr=145770 From owner-freebsd-multimedia@FreeBSD.ORG Wed Jun 9 05:50:04 2010 Return-Path: Delivered-To: freebsd-multimedia@hub.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 063281065672 for ; Wed, 9 Jun 2010 05:50:04 +0000 (UTC) (envelope-from gnats@FreeBSD.org) Received: from freefall.freebsd.org (unknown [IPv6:2001:4f8:fff6::28]) by mx1.freebsd.org (Postfix) with ESMTP id E89BF8FC21 for ; Wed, 9 Jun 2010 05:50:03 +0000 (UTC) Received: from freefall.freebsd.org (localhost [127.0.0.1]) by freefall.freebsd.org (8.14.4/8.14.4) with ESMTP id o595o3jb059351 for ; Wed, 9 Jun 2010 05:50:03 GMT (envelope-from gnats@freefall.freebsd.org) Received: (from gnats@localhost) by freefall.freebsd.org (8.14.4/8.14.4/Submit) id o595o38R059350; Wed, 9 Jun 2010 05:50:03 GMT (envelope-from gnats) Date: Wed, 9 Jun 2010 05:50:03 GMT Message-Id: <201006090550.o595o38R059350@freefall.freebsd.org> To: freebsd-multimedia@FreeBSD.org From: dfilter@FreeBSD.ORG (dfilter service) Cc: Subject: Re: kern/147466: commit references a PR X-BeenThere: freebsd-multimedia@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: dfilter service List-Id: Multimedia discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 09 Jun 2010 05:50:04 -0000 The following reply was made to PR kern/147466; it has been noted by GNATS. From: dfilter@FreeBSD.ORG (dfilter service) To: bug-followup@FreeBSD.org Cc: Subject: Re: kern/147466: commit references a PR Date: Wed, 9 Jun 2010 05:49:11 +0000 (UTC) Author: mav Date: Wed Jun 9 05:49:02 2010 New Revision: 208934 URL: http://svn.freebsd.org/changeset/base/208934 Log: Add set of codec IDs. PR: kern/147466 Modified: head/sys/dev/sound/pci/hda/hdac.c Modified: head/sys/dev/sound/pci/hda/hdac.c ============================================================================== --- head/sys/dev/sound/pci/hda/hdac.c Wed Jun 9 05:06:42 2010 (r208933) +++ head/sys/dev/sound/pci/hda/hdac.c Wed Jun 9 05:49:02 2010 (r208934) @@ -741,6 +741,7 @@ static const struct { #define HDA_CODEC_CX20561 HDA_CODEC_CONSTRUCT(CONEXANT, 0x5051) #define HDA_CODEC_CX20582 HDA_CODEC_CONSTRUCT(CONEXANT, 0x5066) #define HDA_CODEC_CX20583 HDA_CODEC_CONSTRUCT(CONEXANT, 0x5067) +#define HDA_CODEC_CX20585 HDA_CODEC_CONSTRUCT(CONEXANT, 0x5069) #define HDA_CODEC_CXXXXX HDA_CODEC_CONSTRUCT(CONEXANT, 0xffff) /* VIA */ @@ -803,6 +804,10 @@ static const struct { #define HDA_CODEC_NVIDIAMCP78 HDA_CODEC_CONSTRUCT(NVIDIA, 0x0002) #define HDA_CODEC_NVIDIAMCP78_2 HDA_CODEC_CONSTRUCT(NVIDIA, 0x0006) #define HDA_CODEC_NVIDIAMCP7A HDA_CODEC_CONSTRUCT(NVIDIA, 0x0007) +#define HDA_CODEC_NVIDIAGT220 HDA_CODEC_CONSTRUCT(NVIDIA, 0x000a) +#define HDA_CODEC_NVIDIAGT21X HDA_CODEC_CONSTRUCT(NVIDIA, 0x000b) +#define HDA_CODEC_NVIDIAMCP89 HDA_CODEC_CONSTRUCT(NVIDIA, 0x000c) +#define HDA_CODEC_NVIDIAGT240 HDA_CODEC_CONSTRUCT(NVIDIA, 0x000d) #define HDA_CODEC_NVIDIAMCP67 HDA_CODEC_CONSTRUCT(NVIDIA, 0x0067) #define HDA_CODEC_NVIDIAMCP73 HDA_CODEC_CONSTRUCT(NVIDIA, 0x8001) #define HDA_CODEC_NVIDIAXXXX HDA_CODEC_CONSTRUCT(NVIDIA, 0xffff) @@ -920,6 +925,7 @@ static const struct { { HDA_CODEC_CX20561, "Conexant CX20561 (Hermosa)" }, { HDA_CODEC_CX20582, "Conexant CX20582 (Pebble)" }, { HDA_CODEC_CX20583, "Conexant CX20583 (Pebble HSF)" }, + { HDA_CODEC_CX20585, "Conexant CX20585" }, { HDA_CODEC_VT1708_8, "VIA VT1708_8" }, { HDA_CODEC_VT1708_9, "VIA VT1708_9" }, { HDA_CODEC_VT1708_A, "VIA VT1708_A" }, @@ -975,6 +981,10 @@ static const struct { { HDA_CODEC_NVIDIAMCP78, "NVidia MCP78 HDMI" }, { HDA_CODEC_NVIDIAMCP78_2, "NVidia MCP78 HDMI" }, { HDA_CODEC_NVIDIAMCP7A, "NVidia MCP7A HDMI" }, + { HDA_CODEC_NVIDIAGT220, "NVidia GT220 HDMI" }, + { HDA_CODEC_NVIDIAGT21X, "NVidia GT21x HDMI" }, + { HDA_CODEC_NVIDIAMCP89, "NVidia MCP89 HDMI" }, + { HDA_CODEC_NVIDIAGT240, "NVidia GT240 HDMI" }, { HDA_CODEC_INTELG45_1, "Intel G45 HDMI" }, { HDA_CODEC_INTELG45_2, "Intel G45 HDMI" }, { HDA_CODEC_INTELG45_3, "Intel G45 HDMI" }, _______________________________________________ svn-src-all@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/svn-src-all To unsubscribe, send any mail to "svn-src-all-unsubscribe@freebsd.org" From owner-freebsd-multimedia@FreeBSD.ORG Wed Jun 9 07:45:38 2010 Return-Path: Delivered-To: freebsd-multimedia@hub.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 18C5F1065675; Wed, 9 Jun 2010 07:45:38 +0000 (UTC) (envelope-from mav@FreeBSD.org) Received: from freefall.freebsd.org (unknown [IPv6:2001:4f8:fff6::28]) by mx1.freebsd.org (Postfix) with ESMTP id E46068FC13; Wed, 9 Jun 2010 07:45:37 +0000 (UTC) Received: from freefall.freebsd.org (localhost [127.0.0.1]) by freefall.freebsd.org (8.14.4/8.14.4) with ESMTP id o597jbVw088433; Wed, 9 Jun 2010 07:45:37 GMT (envelope-from mav@freefall.freebsd.org) Received: (from mav@localhost) by freefall.freebsd.org (8.14.4/8.14.4/Submit) id o597jbnI088429; Wed, 9 Jun 2010 07:45:37 GMT (envelope-from mav) Date: Wed, 9 Jun 2010 07:45:37 GMT Message-Id: <201006090745.o597jbnI088429@freefall.freebsd.org> To: giantlock@gmail.com, mav@FreeBSD.org, freebsd-multimedia@FreeBSD.org From: mav@FreeBSD.org Cc: Subject: Re: kern/147466: [snd_hda] [patch] Thinkpad t510, codecs not recognized X-BeenThere: freebsd-multimedia@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: Multimedia discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 09 Jun 2010 07:45:38 -0000 Synopsis: [snd_hda] [patch] Thinkpad t510, codecs not recognized State-Changed-From-To: open->patched State-Changed-By: mav State-Changed-When: Wed Jun 9 07:45:02 UTC 2010 State-Changed-Why: Patch committed to HEAD. http://www.freebsd.org/cgi/query-pr.cgi?pr=147466 From owner-freebsd-multimedia@FreeBSD.ORG Wed Jun 9 10:56:14 2010 Return-Path: Delivered-To: multimedia@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 668841065675 for ; Wed, 9 Jun 2010 10:56:14 +0000 (UTC) (envelope-from SamanKaya@netscape.net) Received: from imr-da05.mx.aol.com (imr-da05.mx.aol.com [205.188.105.147]) by mx1.freebsd.org (Postfix) with ESMTP id 2A8888FC1A for ; Wed, 9 Jun 2010 10:56:13 +0000 (UTC) Received: from mtaout-ma06.r1000.mx.aol.com (mtaout-ma06.r1000.mx.aol.com [172.29.41.6]) by imr-da05.mx.aol.com (8.14.1/8.14.1) with ESMTP id o59AtqB2006104 for ; Wed, 9 Jun 2010 06:55:53 -0400 Received: from [192.168.0.51] (unknown [85.105.64.2]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (No client certificate requested) by mtaout-ma06.r1000.mx.aol.com (MUA/Third Party Client Interface) with ESMTPSA id E1517E00008C for ; Wed, 9 Jun 2010 06:55:50 -0400 (EDT) Message-ID: <4C0F7273.8010108@netscape.net> Date: Wed, 09 Jun 2010 13:52:35 +0300 From: Kaya Saman User-Agent: Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.1.9) Gecko/20100317 Thunderbird/3.0.4 MIME-Version: 1.0 To: multimedia@freebsd.org References: <4C0B56BF.1020908@netscape.net> In-Reply-To: <4C0B56BF.1020908@netscape.net> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit x-aol-global-disposition: G X-AOL-SCOLL-SCORE: 0:2:480191136:93952408 X-AOL-SCOLL-URL_COUNT: 0 x-aol-sid: 3039ac1d29064c0f73363261 X-AOL-IP: 85.105.64.2 Cc: Subject: Re: Setting audio input source for Darkice using mixer: can't set vol?? X-BeenThere: freebsd-multimedia@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: Multimedia discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 09 Jun 2010 10:56:14 -0000 Hi guys, just want to bump this as it's been a few days!! Am too new on FreeBSD to diagnose the issue myself or have the experience to know where this problem is coming from so I hope someone can help?? Thanks, Kaya On 06/06/2010 11:05, Kaya Saman wrote: > Hi, > > am trying to set pcm or vol as the input source for my mixer in order > to be used in conjunction with Darkice. > > For Darkice I have already set input as /dev/dsp which should be ok as > /dev/dsp0.0 comes up when using ls /dev..... however, I had this > config working on another box so from what I can tell the 0.0 just > gives the amount of simultaneous channels if I'm not mistaken. > > The major difficulty however is coming from the fact that I can't set > the rec input to be pcm or vol :-( > > pciconf -lv shows this: > > hdac0@pci0:0:27:0: class=0x040300 card=0x50038086 chip=0x3a3e8086 > rev=0x00 hdr=0x00 > vendor = 'Intel Corporation' > device = 'HD Audio Controller' > class = multimedia > subclass = HDA > > and as both Andrew Thompson and Frank Shute helped me last time getting: > > snd_hda_load="YES" > > into /boot/loader.conf audio works without any problem too as have > tested playback!! > > If I try to set: > > # mixer =rec vol > mixer: unknown recording device: vol > usage: mixer [-f device] [-s | -S] [dev [+|-][voll[:[+|-]volr]] ... > mixer [-f device] [-s | -S] recsrc ... > mixer [-f device] [-s | -S] {^|+|-|=}rec rdev ... > devices: vol, pcm, speaker, mic, mix, rec > rec devices: mic, mix > > I just get that the rec interfaces are mic or mix?? This is not the > same as my other box using a different and much older integral sound > chip. > > I also attempted to comment the snd_hda_load out of /boot/loader.conf > and include this instead: > > snd_driver_load="YES" > > which basically did the same thing as the above with (so also a small > question here about which line is better?) so yeah am stuck with both > kernel module loaders providing the same output :-( > > Is there a way other then feeding a cable from the output into the > input to rectify this issue?? > > Thanks, > > Kaya > _______________________________________________ > freebsd-multimedia@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-multimedia > To unsubscribe, send any mail to > "freebsd-multimedia-unsubscribe@freebsd.org" From owner-freebsd-multimedia@FreeBSD.ORG Wed Jun 9 11:36:41 2010 Return-Path: Delivered-To: multimedia@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id F26FE106566B for ; Wed, 9 Jun 2010 11:36:41 +0000 (UTC) (envelope-from tevans.uk@googlemail.com) Received: from mail-fx0-f54.google.com (mail-fx0-f54.google.com [209.85.161.54]) by mx1.freebsd.org (Postfix) with ESMTP id 862CC8FC13 for ; Wed, 9 Jun 2010 11:36:41 +0000 (UTC) Received: by fxm20 with SMTP id 20so4370160fxm.13 for ; Wed, 09 Jun 2010 04:36:40 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=googlemail.com; s=gamma; h=domainkey-signature:mime-version:received:received:in-reply-to :references:date:message-id:subject:from:to:cc:content-type; bh=XpQ0qVE/Z9GfbPTMsEBSnQlHMc3Hr+lUqtYejxEnFbI=; b=VxFeRBqtuHoyk27hufbWgTH7kNz4D22Bz+A3vrXj2ClsRXzBQ1i53xNaIAMQwb22lB Lfhjy3a8iV/KS6u58rRSxNmB0TmrXxIK/9b9244YJgDa58M/vyZvhGJdpJ7RYU2ciMQz y08Qiyd/TzE/NqK6hyLU6MgthM0LiM39+BFjI= DomainKey-Signature: a=rsa-sha1; c=nofws; d=googlemail.com; s=gamma; h=mime-version:in-reply-to:references:date:message-id:subject:from:to :cc:content-type; b=Qy8g7TcVpX4fyOhpNAoEzpe9qIEXE2H1WHYEhNKWClYErEL7sEZ6zPvBLg0gS6qMkH BjfR6COkS0FFQBhe2tvf6v33TOkcez2uAvFaq1Eeqs/3YU2Y/qtGsCefwhfRZs2b13WL 5KBkBi7WQhh6W+iVYC+0u8QdQCSd/rF2fMM8U= MIME-Version: 1.0 Received: by 10.239.185.69 with SMTP id b5mr920430hbh.175.1276082095461; Wed, 09 Jun 2010 04:14:55 -0700 (PDT) Received: by 10.239.185.1 with HTTP; Wed, 9 Jun 2010 04:14:55 -0700 (PDT) In-Reply-To: <4C0F7273.8010108@netscape.net> References: <4C0B56BF.1020908@netscape.net> <4C0F7273.8010108@netscape.net> Date: Wed, 9 Jun 2010 12:14:55 +0100 Message-ID: From: Tom Evans To: Kaya Saman Content-Type: text/plain; charset=UTF-8 Cc: multimedia@freebsd.org Subject: Re: Setting audio input source for Darkice using mixer: can't set vol?? X-BeenThere: freebsd-multimedia@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: Multimedia discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 09 Jun 2010 11:36:42 -0000 On Wed, Jun 9, 2010 at 11:52 AM, Kaya Saman wrote: > Hi guys, > > just want to bump this as it's been a few days!! > > Am too new on FreeBSD to diagnose the issue myself or have the experience to > know where this problem is coming from so I hope someone can help?? > > Thanks, > > Kaya > It's unclear what your problem is. You cannot set 'vol' as a recording source, it is an output device. You conclude correctly that your recording devices are mic and mix. Cheers Tom From owner-freebsd-multimedia@FreeBSD.ORG Wed Jun 9 11:40:58 2010 Return-Path: Delivered-To: freebsd-multimedia@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 395621065674; Wed, 9 Jun 2010 11:40:58 +0000 (UTC) (envelope-from wiz@danbala.tuwien.ac.at) Received: from danbala.tuwien.ac.at (danbala.ifoer.tuwien.ac.at [128.130.168.64]) by mx1.freebsd.org (Postfix) with ESMTP id F06E18FC1B; Wed, 9 Jun 2010 11:40:57 +0000 (UTC) Received: by danbala.tuwien.ac.at (Postfix, from userid 116) id C4CB839086A; Wed, 9 Jun 2010 13:40:56 +0200 (MEST) Date: Wed, 9 Jun 2010 13:40:56 +0200 From: Thomas Klausner To: Stefan Ehmann Message-ID: <20100609114056.GI16352@danbala.tuwien.ac.at> References: <20100513233437.GR27722@danbala.tuwien.ac.at> <201005140906.56328.shoesoft@gmx.net> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <201005140906.56328.shoesoft@gmx.net> Cc: freebsd-multimedia@freebsd.org, edwin@mavetju.org, beat@freebsd.org Subject: Re: multimedia/pvr250 port doesn't compile on FreeBSD 8 X-BeenThere: freebsd-multimedia@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: Multimedia discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 09 Jun 2010 11:40:58 -0000 On Fri, May 14, 2010 at 09:06:56AM +0200, Stefan Ehmann wrote: > I stumbled across this problem some time ago in pvrxxx. I guess the fix should > also work for pvr250: > > http://lists.freebsd.org/pipermail/freebsd-current/2008-September/088697.html > > It's probably not the cleanest solution, but pvrxxx works here on 8.0. I met beat@ a few days ago at pkgsrccon and we looked at it. Neither pvr250 nor pvrxxx from ports compiled on his 8.0; it looks like additional changes are needed to adapt it to driver call signature changes in 8.0. beat agreed to take a look at it, I don't know how far he progressed. Cheers, Thomas From owner-freebsd-multimedia@FreeBSD.ORG Wed Jun 9 12:34:39 2010 Return-Path: Delivered-To: freebsd-multimedia@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 6279E106566B for ; Wed, 9 Jun 2010 12:34:39 +0000 (UTC) (envelope-from matanovic.antun@gmail.com) Received: from mail-ww0-f54.google.com (mail-ww0-f54.google.com [74.125.82.54]) by mx1.freebsd.org (Postfix) with ESMTP id BF68D8FC08 for ; Wed, 9 Jun 2010 12:34:38 +0000 (UTC) Received: by wwb22 with SMTP id 22so5693446wwb.13 for ; Wed, 09 Jun 2010 05:34:37 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=domainkey-signature:mime-version:received:received:date:message-id :subject:from:to:content-type; bh=U27sxYexrdkQRA/LDwfK0vQVg5Y3xKQvXu2Z8kHHMSc=; b=MICGqcvr4Sv7Fhx9s+wgkPxpYuHV6ZwYPDNpkpXUiGYCIt9nt+uNHBjCUJxkfePgKF mph6hg7FMVm/cVHhf1A3YW2rrp69OxJYGHXi0Ae116CCg95v1mPldmkgZqOOmMnYLiYW MB9O4BGMPpZkEA6cYtgAPQ/5WZIwVkZ8zfacw= DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=mime-version:date:message-id:subject:from:to:content-type; b=MuD8EVRpX5JwF8ktS3DZB80IOAILPYucnGgvpRakseimCA8EoRNAcWBZFCgzs9sRTM aaowTZyep/Q73B+1poTFkcH3bKb+P4bazH0CA+/PSCZIfS/JkeobBPWQt5hhm/c3rukH 56bMLqMI2VslEVjCNfnZGhN8Sz7u8HyV28vDc= MIME-Version: 1.0 Received: by 10.227.151.77 with SMTP id b13mr16599874wbw.13.1276080157796; Wed, 09 Jun 2010 03:42:37 -0700 (PDT) Received: by 10.227.134.212 with HTTP; Wed, 9 Jun 2010 03:42:37 -0700 (PDT) Date: Wed, 9 Jun 2010 12:42:37 +0200 Message-ID: From: =?ISO-8859-2?Q?Antun_Matanovi=E6?= To: freebsd-multimedia@freebsd.org Content-Type: text/plain; charset=ISO-8859-1 X-Content-Filtered-By: Mailman/MimeDel 2.1.5 Subject: Logitech USB Headset H330 Not Working X-BeenThere: freebsd-multimedia@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: Multimedia discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 09 Jun 2010 12:34:39 -0000 uname -a: FreeBSD FreeBSD.desktop.pc 8.1-BETA1 FreeBSD 8.1-BETA1 #0: Thu May 27 15:31:50 UTC 2010 root@almeida.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC i386 cat /dev/sndstat: FreeBSD Audio Driver (newpcm: 32bit 2009061500/i386) Installed devices: pcm0: (mixer only) dmesg: ugen5.2: at usbus5 uaudio0: on usbus5 uaudio0: No playback! uaudio0: No recording! uaudio0: No midi sequencer pcm0: on uaudio0 dmesg (sysctl hw.usb.uaudio.debug=15): uaudio_mixer_bsd2value: type=0x002 val=-3072 min=-7680 max=0 val=-3072 uaudio_mixer_bsd2value: type=0x002 val=-3072 min=-7680 max=0 val=-3072 uaudio_mixer_write_cfg_callback: uaudio_mixer_bsd2value: type=0x002 val=-2771 min=-7680 max=0 val=-2771 uaudio_mixer_bsd2value: type=0x002 val=-2771 min=-7680 max=0 val=-2771 uaudio_mixer_bsd2value: type=0x002 val=8192 min=0 max=10240 val=8192 uaudio_mixer_write_cfg_callback: uaudio_mixer_write_cfg_callback: uaudio_mixer_write_cfg_callback: uaudio_mixer_write_cfg_callback: uaudio_mixer_bsd2value: type=0x002 val=-2771 min=-7680 max=0 val=-2771 uaudio_mixer_bsd2value: type=0x002 val=-2771 min=-7680 max=0 val=-2771 uaudio_mixer_write_cfg_callback: uaudio_mixer_bsd2value: type=0x002 val=-2771 min=-7680 max=0 val=-2771 uaudio_mixer_bsd2value: type=0x002 val=-2771 min=-7680 max=0 val=-2771 uaudio_mixer_bsd2value: type=0x002 val=8192 min=0 max=10240 val=8192 uaudio_mixer_write_cfg_callback: uaudio_mixer_write_cfg_callback: uaudio_mixer_write_cfg_callback: uaudio_mixer_write_cfg_callback: usbconfig -u 5 -a 2 dump_curr_config_desc: ugen5.2: at usbus5, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON Configuration index 0 bLength = 0x0009 bDescriptorType = 0x0002 wTotalLength = 0x00d0 bNumInterfaces = 0x0003 bConfigurationValue = 0x0001 iConfiguration = 0x0000 bmAttributes = 0x0080 bMaxPower = 0x0032 Interface 0 bLength = 0x0009 bDescriptorType = 0x0004 bInterfaceNumber = 0x0000 bAlternateSetting = 0x0000 bNumEndpoints = 0x0000 bInterfaceClass = 0x0001 bInterfaceSubClass = 0x0001 bInterfaceProtocol = 0x0000 iInterface = 0x0000 Additional Descriptor bLength = 0x0a bDescriptorType = 0x24 bDescriptorSubType = 0x01 RAW dump: 0x00 | 0x0a, 0x24, 0x01, 0x00, 0x01, 0x54, 0x00, 0x02, 0x08 | 0x01, 0x02 Additional Descriptor bLength = 0x0c bDescriptorType = 0x24 bDescriptorSubType = 0x02 RAW dump: 0x00 | 0x0c, 0x24, 0x02, 0x01, 0x01, 0x01, 0x00, 0x02, 0x08 | 0x03, 0x00, 0x00, 0x00 Additional Descriptor bLength = 0x0c bDescriptorType = 0x24 bDescriptorSubType = 0x02 RAW dump: 0x00 | 0x0c, 0x24, 0x02, 0x03, 0x01, 0x02, 0x00, 0x02, 0x08 | 0x03, 0x00, 0x00, 0x00 Additional Descriptor bLength = 0x09 bDescriptorType = 0x24 bDescriptorSubType = 0x03 RAW dump: 0x00 | 0x09, 0x24, 0x03, 0x02, 0x01, 0x03, 0x00, 0x05, 0x08 | 0x00 Additional Descriptor bLength = 0x09 bDescriptorType = 0x24 bDescriptorSubType = 0x03 RAW dump: 0x00 | 0x09, 0x24, 0x03, 0x04, 0x01, 0x01, 0x00, 0x07, 0x08 | 0x00 Additional Descriptor bLength = 0x0a bDescriptorType = 0x24 bDescriptorSubType = 0x06 RAW dump: 0x00 | 0x0a, 0x24, 0x06, 0x05, 0x01, 0x01, 0x01, 0x02, 0x08 | 0x02, 0x00 Additional Descriptor bLength = 0x0a bDescriptorType = 0x24 bDescriptorSubType = 0x06 RAW dump: 0x00 | 0x0a, 0x24, 0x06, 0x06, 0x03, 0x01, 0x03, 0x00, 0x08 | 0x00, 0x00 Additional Descriptor bLength = 0x0c bDescriptorType = 0x24 bDescriptorSubType = 0x04 RAW dump: 0x00 | 0x0c, 0x24, 0x04, 0x07, 0x01, 0x06, 0x02, 0x03, 0x08 | 0x00, 0x00, 0x00, 0x00 Interface 1 bLength = 0x0009 bDescriptorType = 0x0004 bInterfaceNumber = 0x0001 bAlternateSetting = 0x0000 bNumEndpoints = 0x0000 bInterfaceClass = 0x0001 bInterfaceSubClass = 0x0002 bInterfaceProtocol = 0x0000 iInterface = 0x0000 Interface 1 Alt 1 bLength = 0x0009 bDescriptorType = 0x0004 bInterfaceNumber = 0x0001 bAlternateSetting = 0x0001 bNumEndpoints = 0x0001 bInterfaceClass = 0x0001 bInterfaceSubClass = 0x0002 bInterfaceProtocol = 0x0000 iInterface = 0x0000 Additional Descriptor bLength = 0x07 bDescriptorType = 0x24 bDescriptorSubType = 0x01 RAW dump: 0x00 | 0x07, 0x24, 0x01, 0x01, 0x01, 0x01, 0x00 Additional Descriptor bLength = 0x0e bDescriptorType = 0x24 bDescriptorSubType = 0x02 RAW dump: 0x00 | 0x0e, 0x24, 0x02, 0x01, 0x02, 0x02, 0x10, 0x02, 0x08 | 0x00, 0x7d, 0x00, 0x80, 0x3e, 0x00 Endpoint 0 bLength = 0x0007 bDescriptorType = 0x0005 bEndpointAddress = 0x0001 bmAttributes = 0x0009 wMaxPacketSize = 0x00c0 bInterval = 0x0001 bRefresh = 0x0000 bSynchAddress = 0x0000 Additional Descriptor bLength = 0x07 bDescriptorType = 0x25 bDescriptorSubType = 0x01 RAW dump: 0x00 | 0x07, 0x25, 0x01, 0x01, 0x01, 0x01, 0x00 Interface 2 bLength = 0x0009 bDescriptorType = 0x0004 bInterfaceNumber = 0x0002 bAlternateSetting = 0x0000 bNumEndpoints = 0x0000 bInterfaceClass = 0x0001 bInterfaceSubClass = 0x0002 bInterfaceProtocol = 0x0000 iInterface = 0x0000 Interface 2 Alt 1 bLength = 0x0009 bDescriptorType = 0x0004 bInterfaceNumber = 0x0002 bAlternateSetting = 0x0001 bNumEndpoints = 0x0001 bInterfaceClass = 0x0001 bInterfaceSubClass = 0x0002 bInterfaceProtocol = 0x0000 iInterface = 0x0000 Additional Descriptor bLength = 0x07 bDescriptorType = 0x24 bDescriptorSubType = 0x01 RAW dump: 0x00 | 0x07, 0x24, 0x01, 0x04, 0x01, 0x01, 0x00 Additional Descriptor bLength = 0x0e bDescriptorType = 0x24 bDescriptorSubType = 0x02 RAW dump: 0x00 | 0x0e, 0x24, 0x02, 0x01, 0x02, 0x02, 0x10, 0x02, 0x08 | 0x00, 0x7d, 0x00, 0x80, 0x3e, 0x00 Endpoint 0 bLength = 0x0007 bDescriptorType = 0x0005 bEndpointAddress = 0x0082 bmAttributes = 0x0005 wMaxPacketSize = 0x00c8 bInterval = 0x0001 bRefresh = 0x0000 bSynchAddress = 0x0000 Additional Descriptor bLength = 0x07 bDescriptorType = 0x25 bDescriptorSubType = 0x01 RAW dump: 0x00 | 0x07, 0x25, 0x01, 0x01, 0x01, 0x01, 0x00 usbconfig -u 5 -a 2 dump_device_desc: ugen5.2: at usbus5, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON bLength = 0x0012 bDescriptorType = 0x0001 bcdUSB = 0x0110 bDeviceClass = 0x0000 bDeviceSubClass = 0x0000 bDeviceProtocol = 0x0000 bMaxPacketSize0 = 0x0040 idVendor = 0x046d idProduct = 0x0a14 bcdDevice = 0x0130 iManufacturer = 0x0001 iProduct = 0x0002 iSerialNumber = 0x0000 bNumConfigurations = 0x0001 From owner-freebsd-multimedia@FreeBSD.ORG Wed Jun 9 15:32:14 2010 Return-Path: Delivered-To: freebsd-multimedia@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 16C4E1065674 for ; Wed, 9 Jun 2010 15:32:14 +0000 (UTC) (envelope-from blott@computing.dcu.ie) Received: from mailhost.computing.dcu.ie (Mailhost.Computing.DCU.IE [136.206.11.247]) by mx1.freebsd.org (Postfix) with ESMTP id 88EC28FC18 for ; Wed, 9 Jun 2010 15:32:13 +0000 (UTC) Received: from sblott-desktop.computing.dcu.ie (dhcp11143.computing.dcu.ie [136.206.11.143]) by mailhost.computing.dcu.ie (8.13.2/8.13.2) with ESMTP id o59FCHTc023077 for ; Wed, 9 Jun 2010 16:12:17 +0100 (IST) Received: from sblott-desktop.computing.dcu.ie (localhost [127.0.0.1]) by sblott-desktop.computing.dcu.ie (8.14.3/8.14.3) with ESMTP id o59FCCkf004938 for ; Wed, 9 Jun 2010 16:12:12 +0100 (IST) (envelope-from blott@sblott-desktop.computing.dcu.ie) Received: (from blott@localhost) by sblott-desktop.computing.dcu.ie (8.14.3/8.14.3/Submit) id o59FCBq5004937 for freebsd-multimedia@freebsd.org; Wed, 9 Jun 2010 16:12:11 +0100 (IST) (envelope-from blott) Date: Wed, 9 Jun 2010 16:12:11 +0100 From: Stephen Blott To: freebsd-multimedia@freebsd.org Message-ID: <20100609151211.GA89536@computing.dcu.ie> MIME-Version: 1.0 Content-Type: multipart/mixed; boundary="82I3+IH0IqGh5yIs" Content-Disposition: inline User-Agent: Mutt/1.5.20 (2009-06-14) Subject: [tk@giga.or.at: Re: multimedia/pvr250 port doesn't compile on FreeBSD 8] X-BeenThere: freebsd-multimedia@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: Multimedia discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 09 Jun 2010 15:32:14 -0000 --82I3+IH0IqGh5yIs Content-Type: text/plain; charset=us-ascii Content-Disposition: inline I found this problem previously with the pvr250 port. Here are my notes from then (it worked for me). Steve For the pvr250 port, there were a couple of source code changes necessary. In cxm.c, replace occurrences of unit = UNIT( minor(dev) ); with unit = dev2unit(dev); Also, in cxm.i2c.c, change: cxm_iic_callback( device_t dev, int index, caddr_t *data ) to cxm_iic_callback( device_t dev, int index, caddr_t data ) and add DRIVER_MODULE(iicbb, cxm_iic, iicbb_driver, iicbb_devclass, 0, 0); at the end. --82I3+IH0IqGh5yIs Content-Type: message/rfc822 Content-Disposition: inline Return-Path: X-Spam-Checker-Version: SpamAssassin 3.2.5 (2008-06-10) on sblott-desktop.computing.dcu.ie X-Spam-Level: X-Spam-Status: No, score=0.6 required=3.0 tests=BAYES_00,FH_DATE_PAST_20XX autolearn=no version=3.2.5 Delivered-To: unknown Received: from mailhost.computing.dcu.ie (136.206.11.247) by sblott-desktop.computing.dcu.ie with POP3-SSL; 09 Jun 2010 11:45:01 -0000 Received: from mail-ww0-f45.google.com (mail-ww0-f45.google.com [74.125.82.45]) by mailhost.computing.dcu.ie (8.13.2/8.13.2) with ESMTP id o59BfTkH006259 for ; Wed, 9 Jun 2010 12:41:35 +0100 (IST) Received: by wwb13 with SMTP id 13so563026wwb.18 for ; Wed, 09 Jun 2010 04:41:24 -0700 (PDT) Received: by 10.216.185.209 with SMTP id u59mr4857914wem.112.1276083672281; Wed, 09 Jun 2010 04:41:12 -0700 (PDT) X-Forwarded-To: sblott@computing.dcu.ie X-Forwarded-For: smblott@gmail.com sblott@computing.dcu.ie Delivered-To: smblott@gmail.com Received: by 10.216.39.142 with SMTP id d14cs161634web; Wed, 9 Jun 2010 04:41:11 -0700 (PDT) Received: by 10.115.84.27 with SMTP id m27mr1337714wal.167.1276083670222; Wed, 09 Jun 2010 04:41:10 -0700 (PDT) Received: from mx2.freebsd.org (mx2.freebsd.org [69.147.83.53]) by mx.google.com with ESMTP id r12si16246040wac.74.2010.06.09.04.41.09; Wed, 09 Jun 2010 04:41:10 -0700 (PDT) Received-SPF: pass (google.com: domain of owner-freebsd-multimedia@freebsd.org designates 69.147.83.53 as permitted sender) client-ip=69.147.83.53; Authentication-Results: mx.google.com; spf=pass (google.com: domain of owner-freebsd-multimedia@freebsd.org designates 69.147.83.53 as permitted sender) smtp.mail=owner-freebsd-multimedia@freebsd.org Received: from hub.freebsd.org (hub.freebsd.org [IPv6:2001:4f8:fff6::36]) by mx2.freebsd.org (Postfix) with ESMTP id BC712155671; Wed, 9 Jun 2010 11:41:07 +0000 (UTC) Received: from hub.freebsd.org (localhost [127.0.0.1]) by hub.freebsd.org (Postfix) with ESMTP id EAA8E10656CC; Wed, 9 Jun 2010 11:41:06 +0000 (UTC) (envelope-from owner-freebsd-multimedia@freebsd.org) Delivered-To: freebsd-multimedia@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 395621065674; Wed, 9 Jun 2010 11:40:58 +0000 (UTC) (envelope-from wiz@danbala.tuwien.ac.at) Received: from danbala.tuwien.ac.at (danbala.ifoer.tuwien.ac.at [128.130.168.64]) by mx1.freebsd.org (Postfix) with ESMTP id F06E18FC1B; Wed, 9 Jun 2010 11:40:57 +0000 (UTC) Received: by danbala.tuwien.ac.at (Postfix, from userid 116) id C4CB839086A; Wed, 9 Jun 2010 13:40:56 +0200 (MEST) Date: Wed, 9 Jun 2010 13:40:56 +0200 From: Thomas Klausner To: Stefan Ehmann Message-ID: <20100609114056.GI16352@danbala.tuwien.ac.at> References: <20100513233437.GR27722@danbala.tuwien.ac.at> <201005140906.56328.shoesoft@gmx.net> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <201005140906.56328.shoesoft@gmx.net> Cc: freebsd-multimedia@freebsd.org, edwin@mavetju.org, beat@freebsd.org Subject: Re: multimedia/pvr250 port doesn't compile on FreeBSD 8 X-BeenThere: freebsd-multimedia@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: Multimedia discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: owner-freebsd-multimedia@freebsd.org Errors-To: owner-freebsd-multimedia@freebsd.org On Fri, May 14, 2010 at 09:06:56AM +0200, Stefan Ehmann wrote: > I stumbled across this problem some time ago in pvrxxx. I guess the fix should > also work for pvr250: > > http://lists.freebsd.org/pipermail/freebsd-current/2008-September/088697.html > > It's probably not the cleanest solution, but pvrxxx works here on 8.0. I met beat@ a few days ago at pkgsrccon and we looked at it. Neither pvr250 nor pvrxxx from ports compiled on his 8.0; it looks like additional changes are needed to adapt it to driver call signature changes in 8.0. beat agreed to take a look at it, I don't know how far he progressed. Cheers, Thomas _______________________________________________ freebsd-multimedia@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-multimedia To unsubscribe, send any mail to "freebsd-multimedia-unsubscribe@freebsd.org" --82I3+IH0IqGh5yIs-- From owner-freebsd-multimedia@FreeBSD.ORG Wed Jun 9 15:56:43 2010 Return-Path: Delivered-To: multimedia@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 8A6AF106566B for ; Wed, 9 Jun 2010 15:56:43 +0000 (UTC) (envelope-from smithi@nimnet.asn.au) Received: from sola.nimnet.asn.au (paqi.nimnet.asn.au [115.70.110.159]) by mx1.freebsd.org (Postfix) with ESMTP id CE3BB8FC13 for ; Wed, 9 Jun 2010 15:56:42 +0000 (UTC) Received: from localhost (localhost [127.0.0.1]) by sola.nimnet.asn.au (8.14.2/8.14.2) with ESMTP id o59Fidqe068094; Thu, 10 Jun 2010 01:44:40 +1000 (EST) (envelope-from smithi@nimnet.asn.au) Date: Thu, 10 Jun 2010 01:44:39 +1000 (EST) From: Ian Smith To: Kaya Saman In-Reply-To: <4C0F7273.8010108@netscape.net> Message-ID: <20100610012011.T27982@sola.nimnet.asn.au> References: <4C0B56BF.1020908@netscape.net> <4C0F7273.8010108@netscape.net> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Cc: multimedia@freebsd.org Subject: Re: Setting audio input source for Darkice using mixer: can't set vol?? X-BeenThere: freebsd-multimedia@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: Multimedia discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 09 Jun 2010 15:56:43 -0000 On Wed, 9 Jun 2010, Kaya Saman wrote: > Hi guys, > > just want to bump this as it's been a few days!! > > Am too new on FreeBSD to diagnose the issue myself or have the experience to > know where this problem is coming from so I hope someone can help?? > > Thanks, > > Kaya > > > On 06/06/2010 11:05, Kaya Saman wrote: > > Hi, > > > > am trying to set pcm or vol as the input source for my mixer in order to be > > used in conjunction with Darkice. > > > > For Darkice I have already set input as /dev/dsp which should be ok as > > /dev/dsp0.0 comes up when using ls /dev..... however, I had this config > > working on another box so from what I can tell the 0.0 just gives the > > amount of simultaneous channels if I'm not mistaken. > > > > The major difficulty however is coming from the fact that I can't set the > > rec input to be pcm or vol :-( > > > > pciconf -lv shows this: > > > > hdac0@pci0:0:27:0: class=0x040300 card=0x50038086 chip=0x3a3e8086 > > rev=0x00 hdr=0x00 > > vendor = 'Intel Corporation' > > device = 'HD Audio Controller' > > class = multimedia > > subclass = HDA > > > > and as both Andrew Thompson and Frank Shute helped me last time getting: > > > > snd_hda_load="YES" > > > > into /boot/loader.conf audio works without any problem too as have tested > > playback!! > > > > If I try to set: > > > > # mixer =rec vol > > mixer: unknown recording device: vol > > usage: mixer [-f device] [-s | -S] [dev [+|-][voll[:[+|-]volr]] ... > > mixer [-f device] [-s | -S] recsrc ... > > mixer [-f device] [-s | -S] {^|+|-|=}rec rdev ... > > devices: vol, pcm, speaker, mic, mix, rec > > rec devices: mic, mix > > > > I just get that the rec interfaces are mic or mix?? This is not the same as > > my other box using a different and much older integral sound chip. Seeing noone else has pounced .. we run Darkice for audio logging, but a hacked version of edcast_jack for streaming, and that on a Debian box using jackd and ALSA to split the feed to both of them, which may not seem relevant at all .. but we use Mix as the recording device, zeroing levels and muting all channels we're not using (mic, pcm, CD etc). We record from Line and set levels on that, but it works the same using just pcm in the mix instead. Not what you asked I know, but it may work ok for you .. with digital mixing with everything else off or zero, there's no degradation. HTH, Ian > > I also attempted to comment the snd_hda_load out of /boot/loader.conf and > > include this instead: > > > > snd_driver_load="YES" > > > > which basically did the same thing as the above with (so also a small > > question here about which line is better?) so yeah am stuck with both > > kernel module loaders providing the same output :-( > > > > Is there a way other then feeding a cable from the output into the input to > > rectify this issue?? > > > > Thanks, > > > > Kaya From owner-freebsd-multimedia@FreeBSD.ORG Wed Jun 9 16:55:11 2010 Return-Path: Delivered-To: freebsd-multimedia@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id D0638106566B for ; Wed, 9 Jun 2010 16:55:11 +0000 (UTC) (envelope-from dieterbsd@engineer.com) Received: from imr-ma04.mx.aol.com (imr-ma04.mx.aol.com [64.12.206.42]) by mx1.freebsd.org (Postfix) with ESMTP id 909528FC0C for ; Wed, 9 Jun 2010 16:55:11 +0000 (UTC) Received: from imo-ma03.mx.aol.com (imo-ma03.mx.aol.com [64.12.78.138]) by imr-ma04.mx.aol.com (8.14.1/8.14.1) with ESMTP id o59Gj0Ja012177 for ; Wed, 9 Jun 2010 12:45:00 -0400 Received: from dieterbsd@engineer.com by imo-ma03.mx.aol.com (mail_out_v42.9.) id n.d8f.ca5885a (43991) for ; Wed, 9 Jun 2010 12:44:55 -0400 (EDT) Received: from smtprly-db03.mx.aol.com (smtprly-db03.mx.aol.com [205.188.249.154]) by cia-dd05.mx.aol.com (v129.4) with ESMTP id MAILCIADD058-5c424c0fc4f5281; Wed, 09 Jun 2010 12:44:55 -0400 Received: from web-mmc-d05 (web-mmc-d05.sim.aol.com [205.188.103.95]) by smtprly-db03.mx.aol.com (v129.4) with ESMTP id MAILSMTPRLYDB038-5c424c0fc4f5281; Wed, 09 Jun 2010 12:44:38 -0400 To: freebsd-multimedia@freebsd.org Content-Transfer-Encoding: quoted-printable Date: Wed, 09 Jun 2010 12:44:37 -0400 X-MB-Message-Source: WebUI X-AOL-IP: 72.251.79.183 X-MB-Message-Type: User MIME-Version: 1.0 From: dieterbsd@engineer.com Content-Type: text/plain; charset="us-ascii" X-Mailer: Mail.com Webmail 31888-STANDARD Received: from 72.251.79.183 by web-mmc-d05.sysops.aol.com (205.188.103.95) with HTTP (WebMailUI); Wed, 09 Jun 2010 12:44:37 -0400 Message-Id: <8CCD60A2F00DC80-1228-37D4@web-mmc-d05.sysops.aol.com> X-Spam-Flag: NO X-AOL-SENDER: dieterbsd@engineer.com Subject: Ethernet to TV box for FreeBSD? X-BeenThere: freebsd-multimedia@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: Multimedia discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 09 Jun 2010 16:55:11 -0000 I'm seeking recommendations for one of those boxes that reads video from Ethernet, decompresses it and feeds it to a TV. Must have: wired Ethernet in s-video NTSC out audio line out (typically via "RCA jacks") works with FreeBSD handles mpeg2 transport streams 480i, 720p 1080i good "tricks" modes seek fast forward slow motion, various speeds, both directions freeze frame advance 1 frame at a time, both directions closed captions zoom in/out (handle 4:3 pillarboxed within 16:9, ...) Bonus points for: time counter frame grabber (save a .png or whatever as a file) digital out (dvi, hdmi, displayport, ...) free/open source X11 server Some boxes fail with higher bitrate programs, don't handle the so-called "tricks" modes well, have unreliable hardware, ... From owner-freebsd-multimedia@FreeBSD.ORG Wed Jun 9 17:19:52 2010 Return-Path: Delivered-To: freebsd-multimedia@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 10D5B1065677 for ; Wed, 9 Jun 2010 17:19:52 +0000 (UTC) (envelope-from matanovic.antun@gmail.com) Received: from mail-ew0-f224.google.com (mail-ew0-f224.google.com [209.85.219.224]) by mx1.freebsd.org (Postfix) with ESMTP id 614D58FC0C for ; Wed, 9 Jun 2010 17:19:50 +0000 (UTC) Received: by ewy24 with SMTP id 24so2660161ewy.34 for ; Wed, 09 Jun 2010 10:19:50 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=domainkey-signature:received:received:from:to:subject:date :user-agent:references:in-reply-to:mime-version:content-type :content-transfer-encoding:message-id; bh=b0p1O68PtK/5vhoJfosR5u5p3BxN+PfnIcTPvjL9dJc=; b=n0tWlu5WrFJ8p3g2lFlrEBBQuzDpm46ABRn4NayvyJnoXDYcjMy+koxKrhwqyUFoXG tPhWNYG46R4ELYh8/nKlZYsHOkDFCl01+fpmJgtRm8q1eKfexfg5NUhrOYSz2RiyFwhG OKbfUQiyRK35JwA6oqXusAxk0dAvF7uuye1lU= DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=from:to:subject:date:user-agent:references:in-reply-to:mime-version :content-type:content-transfer-encoding:message-id; b=QQrCZGTdoNNEYZVM8Fb+//2VzsaHph2s6McOw8cPfmDV0+f6EyaZCA/3e/LTqSM4Dr Ya3TTpslqKuHb9GW60R7a8GX94HBO+XYQNvKGGoCxkPb34kJ/8Huhm5BphoH8EZobUJ1 5FYPGwt3I/6oxsToWtBaf4UN3iAboag/PsG98= Received: by 10.213.22.193 with SMTP id o1mr1526860ebb.69.1276103990129; Wed, 09 Jun 2010 10:19:50 -0700 (PDT) Received: from freebsd.desktop.pc (iskon4223.duo.CARNet.hr [193.198.150.127]) by mx.google.com with ESMTPS id 14sm4233349ewy.10.2010.06.09.10.19.48 (version=SSLv3 cipher=RC4-MD5); Wed, 09 Jun 2010 10:19:49 -0700 (PDT) From: Antun =?utf-8?q?Matanovi=C4=87?= To: freebsd-multimedia@freebsd.org Date: Wed, 9 Jun 2010 19:19:44 +0200 User-Agent: KMail/1.13.3 (FreeBSD/8.1-BETA1; KDE/4.4.3; i386; ; ) References: <201006091755.50155.hselasky@c2i.net> In-Reply-To: <201006091755.50155.hselasky@c2i.net> MIME-Version: 1.0 Content-Type: Text/Plain; charset="utf-8" Content-Transfer-Encoding: 7bit Message-Id: <201006091919.44887.matanovic.antun@gmail.com> Subject: Re: Logitech USB Headset H330 Not Working X-BeenThere: freebsd-multimedia@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: Multimedia discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 09 Jun 2010 17:19:52 -0000 On Wednesday 09 June 2010 17:55:50 Hans Petter Selasky wrote: > Hi, > > It looks like the audio part of your headset lack some descriptors > associated with the endpoint descriptors to be detected like a valid audio > device? Does it work under Linux? > > --HPS Yes, it does work under Linux. Well, I am aware that something is missing, of course. I was just hoping that, eventually, someone could provide a patch for snd_uaudio to add support for this headset. Right now I'm unable to find any workaround for this issue, and I don't seem to be the only one having problems with uaudio and various headsets. From owner-freebsd-multimedia@FreeBSD.ORG Wed Jun 9 17:25:21 2010 Return-Path: Delivered-To: freebsd-multimedia@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 51F04106564A for ; Wed, 9 Jun 2010 17:25:21 +0000 (UTC) (envelope-from hselasky@c2i.net) Received: from swip.net (mailfe12.swip.net [212.247.155.97]) by mx1.freebsd.org (Postfix) with ESMTP id D241E8FC0C for ; Wed, 9 Jun 2010 17:25:20 +0000 (UTC) X-Cloudmark-Score: 0.000000 [] X-Cloudmark-Analysis: v=1.0 c=1 a=or1xzSriRRYA:10 a=ood2b7iyd8MA:10 a=IkcTkHD0fZMA:10 a=M8b_wTzEtboA:10 a=MnI1ikcADjEx7bvsp0jZvQ==:17 a=nU3aW-oAl0gLu4cWonoA:9 a=rOA-ONJwF-MsKd2Lm6swjjFID68A:4 a=QEXdDO2ut3YA:10 Received: from [188.126.201.140] (account mc467741@c2i.net HELO laptop002.hselasky.homeunix.org) by mailfe12.swip.net (CommuniGate Pro SMTP 5.2.19) with ESMTPA id 1198314737; Wed, 09 Jun 2010 19:25:18 +0200 From: Hans Petter Selasky To: freebsd-multimedia@freebsd.org Date: Wed, 9 Jun 2010 19:22:31 +0200 User-Agent: KMail/1.12.4 (FreeBSD/8.0-STABLE; KDE/4.3.4; amd64; ; ) References: <201006091755.50155.hselasky@c2i.net> <201006091919.44887.matanovic.antun@gmail.com> In-Reply-To: <201006091919.44887.matanovic.antun@gmail.com> X-Face: +~\`s("[*|O,="7?X@L.elg*F"OA\I/3%^p8g?ab%RN'( =?utf-8?q?=3B=5FIjlA=3A=0A=09hGE=2E=2EEw?=, =?utf-8?q?XAQ*o=23=5C/M=7ESC=3DS1-f9=7BEzRfT=27=7CHhll5Q=5Dha5Bt-s=7CoTlKM?= =?utf-8?q?usi=3A1e=5BwJl=7Dkd=7DGR=0A=09Z0adGx-x=5F0zGbZj=27e?=(Y[(UNle~)8CQWXW@:DX+9)_YlB[tIccCPN$7/L' MIME-Version: 1.0 Content-Type: Text/Plain; charset="utf-8" Content-Transfer-Encoding: quoted-printable Message-Id: <201006091922.31907.hselasky@c2i.net> Cc: Subject: Re: Logitech USB Headset H330 Not Working X-BeenThere: freebsd-multimedia@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: Multimedia discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 09 Jun 2010 17:25:21 -0000 On Wednesday 09 June 2010 19:19:44 Antun Matanovi=C4=87 wrote: > On Wednesday 09 June 2010 17:55:50 Hans Petter Selasky wrote: > > Hi, > > > > It looks like the audio part of your headset lack some descriptors > > associated with the endpoint descriptors to be detected like a valid > > audio device? Does it work under Linux? > > > > --HPS >=20 > Yes, it does work under Linux. >=20 > Well, I am aware that something is missing, of course. I was just hoping > that, eventually, someone could provide a patch for snd_uaudio to add > support for this headset. >=20 > Right now I'm unable to find any workaround for this issue, and I don't > seem to be the only one having problems with uaudio and various headsets. You could try to search google for the idVendor and idProduct of your devic= e=20 in the Device Descriptor. =2D-HPS From owner-freebsd-multimedia@FreeBSD.ORG Wed Jun 9 17:59:43 2010 Return-Path: Delivered-To: multimedia@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 46304106564A for ; Wed, 9 Jun 2010 17:59:43 +0000 (UTC) (envelope-from SamanKaya@netscape.net) Received: from imr-da04.mx.aol.com (imr-da04.mx.aol.com [205.188.105.146]) by mx1.freebsd.org (Postfix) with ESMTP id 0435F8FC24 for ; Wed, 9 Jun 2010 17:59:42 +0000 (UTC) Received: from mtaout-ma03.r1000.mx.aol.com (mtaout-ma03.r1000.mx.aol.com [172.29.41.3]) by imr-da04.mx.aol.com (8.14.1/8.14.1) with ESMTP id o59HxGOl002424; Wed, 9 Jun 2010 13:59:18 -0400 Received: from [172.16.0.3] (unknown [212.156.209.87]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (No client certificate requested) by mtaout-ma03.r1000.mx.aol.com (MUA/Third Party Client Interface) with ESMTPSA id 8B5AFE000205; Wed, 9 Jun 2010 13:59:15 -0400 (EDT) Message-ID: <4C0FD66F.9060605@netscape.net> Date: Wed, 09 Jun 2010 20:59:11 +0300 From: Kaya Saman User-Agent: Mozilla/5.0 (X11; U; Linux i686 (x86_64); en-US; rv:1.9.1.8) Gecko/20100227 Lightning/1.0b1 Thunderbird/3.0.3 MIME-Version: 1.0 To: Ian Smith References: <4C0B56BF.1020908@netscape.net> <4C0F7273.8010108@netscape.net> <20100610012011.T27982@sola.nimnet.asn.au> In-Reply-To: <20100610012011.T27982@sola.nimnet.asn.au> x-aol-global-disposition: G X-AOL-SCOLL-SCORE: 0:2:497171520:93952408 X-AOL-SCOLL-URL_COUNT: 0 x-aol-sid: 3039ac1d29034c0fd6737bf1 X-AOL-IP: 212.156.209.87 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit X-Content-Filtered-By: Mailman/MimeDel 2.1.5 Cc: multimedia@freebsd.org Subject: Re: Setting audio input source for Darkice using mixer: can't set vol?? X-BeenThere: freebsd-multimedia@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: Multimedia discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 09 Jun 2010 17:59:43 -0000 On Wed, Jun 9, 2010 at 11:52 AM, Kaya Saman wrote: > > Hi guys, > > > > just want to bump this as it's been a few days!! > > > > Am too new on FreeBSD to diagnose the issue myself or have the experience to > > know where this problem is coming from so I hope someone can help?? > > > > Thanks, > > > > Kaya > > > It's unclear what your problem is. You cannot set 'vol' as a recording source, it is an output device. You conclude correctly that your recording devices are mic and mix. Cheers Tom On 06/09/2010 06:44 PM, Ian Smith wrote: > On Wed, 9 Jun 2010, Kaya Saman wrote: > > Hi guys, > > > > just want to bump this as it's been a few days!! > > > > Am too new on FreeBSD to diagnose the issue myself or have the experience to > > know where this problem is coming from so I hope someone can help?? > > > > Thanks, > > > > Kaya > > > > > > On 06/06/2010 11:05, Kaya Saman wrote: > > > Hi, > > > > > > am trying to set pcm or vol as the input source for my mixer in order to be > > > used in conjunction with Darkice. > > > > > > For Darkice I have already set input as /dev/dsp which should be ok as > > > /dev/dsp0.0 comes up when using ls /dev..... however, I had this config > > > working on another box so from what I can tell the 0.0 just gives the > > > amount of simultaneous channels if I'm not mistaken. > > > > > > The major difficulty however is coming from the fact that I can't set the > > > rec input to be pcm or vol :-( > > > > > > pciconf -lv shows this: > > > > > > hdac0@pci0:0:27:0: class=0x040300 card=0x50038086 chip=0x3a3e8086 > > > rev=0x00 hdr=0x00 > > > vendor = 'Intel Corporation' > > > device = 'HD Audio Controller' > > > class = multimedia > > > subclass = HDA > > > > > > and as both Andrew Thompson and Frank Shute helped me last time getting: > > > > > > snd_hda_load="YES" > > > > > > into /boot/loader.conf audio works without any problem too as have tested > > > playback!! > > > > > > If I try to set: > > > > > > # mixer =rec vol > > > mixer: unknown recording device: vol > > > usage: mixer [-f device] [-s | -S] [dev [+|-][voll[:[+|-]volr]] ... > > > mixer [-f device] [-s | -S] recsrc ... > > > mixer [-f device] [-s | -S] {^|+|-|=}rec rdev ... > > > devices: vol, pcm, speaker, mic, mix, rec > > > rec devices: mic, mix > > > > > > I just get that the rec interfaces are mic or mix?? This is not the same as > > > my other box using a different and much older integral sound chip. > > Seeing noone else has pounced .. we run Darkice for audio logging, but a > hacked version of edcast_jack for streaming, and that on a Debian box > using jackd and ALSA to split the feed to both of them, which may not > seem relevant at all .. but we use Mix as the recording device, zeroing > levels and muting all channels we're not using (mic, pcm, CD etc). We > record from Line and set levels on that, but it works the same using > just pcm in the mix instead. > > Not what you asked I know, but it may work ok for you .. with digital > mixing with everything else off or zero, there's no degradation. > > HTH, Ian > > > > I also attempted to comment the snd_hda_load out of /boot/loader.conf and > > > include this instead: > > > > > > snd_driver_load="YES" > > > > > > which basically did the same thing as the above with (so also a small > > > question here about which line is better?) so yeah am stuck with both > > > kernel module loaders providing the same output :-( > > > > > > Is there a way other then feeding a cable from the output into the input to > > > rectify this issue?? > > > > > > Thanks, > > > > > > Kaya > Thanks Ian and Tom for the responses :-) Tom I'm just going to quote you again: " It's unclear what your problem is. You cannot set 'vol' as a recording source, it is an output device. " Actually the box that's sitting in front of me can do this: $ mixer Mixer vol is currently set to 75:75 Mixer pcm is currently set to 75:75 Mixer speaker is currently set to 75:75 Mixer line is currently set to 75:75 Mixer mic is currently set to 0:0 Mixer cd is currently set to 75:75 Mixer rec is currently set to 0:0 Mixer igain is currently set to 0:0 Mixer ogain is currently set to 50:50 Mixer line1 is currently set to 75:75 Mixer phin is currently set to 0:0 Mixer phout is currently set to 0:0 Recording source: vol Of course it's a totally different system running FreeBSD 8.0 RELEASE 32bit as opposed to 64bit. Also it has a much older sound card which may have better support?? Anyway this is what I'm after as currently I can't get my Darkice/Icecase2/Drupal5 streaming service working as there's no sound input!! I think it's probably just the driver for the HD audio interface in my view. But how to sort or who to go to, to help sort?? Regards, Kaya From owner-freebsd-multimedia@FreeBSD.ORG Wed Jun 9 21:56:16 2010 Return-Path: Delivered-To: multimedia@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 25B8F1065679 for ; Wed, 9 Jun 2010 21:56:16 +0000 (UTC) (envelope-from mccuba48@gmail.com) Received: from mail-yw0-f182.google.com (mail-yw0-f182.google.com [209.85.211.182]) by mx1.freebsd.org (Postfix) with ESMTP id 820878FC1B for ; Wed, 9 Jun 2010 21:56:15 +0000 (UTC) Received: by ywh12 with SMTP id 12so5187157ywh.14 for ; Wed, 09 Jun 2010 14:56:14 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=domainkey-signature:received:received:sender:date:from:to:subject :message-id:organization:x-mailer:mime-version:content-type; bh=pImEDaqpMX9bjuizSPfbmT9L3yJwrUea3F28xgsoFlc=; b=EdCiH45niQR1nrhmeuMCd1royEYBbhyzkSNZZcswAd1imb3r41NzHI3wtErfPbz+gU 6CIuE+8Bt1CzLteMFZLaqkLDqxWZbssJc2t7wMlwkWLu/gYLOMjuesGyfId61rydEpyc DVvwfocjilC/iffjl+BrJCfRezhWhDVwZiAF8= DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=sender:date:from:to:subject:message-id:organization:x-mailer :mime-version:content-type; b=dH/tMF0+NSXPKa9bYqlPa2hwWUWZD2+xJKGOOyCQfWl7HFr5XgzFxU5nQxfaU6Zri7 yOTZhUt/RU+DOQ4lAZW+iImELRNy2RJMhTxyOYZb93sm+sbLZq8hzgXke6NJciyPpL/J nKBov2Yfi35pA3nJuSxsExVHyZREc2sy5cXL8= Received: by 10.229.191.146 with SMTP id dm18mr7072204qcb.46.1276118844658; Wed, 09 Jun 2010 14:27:24 -0700 (PDT) Received: from epia.mmbb.org ([65.213.86.26]) by mx.google.com with ESMTPS id m29sm10825660qck.10.2010.06.09.14.27.23 (version=TLSv1/SSLv3 cipher=RC4-MD5); Wed, 09 Jun 2010 14:27:24 -0700 (PDT) Sender: Manuel Chaviano Date: Wed, 9 Jun 2010 17:27:59 -0400 From: Manuel Chaviano To: multimedia@FreeBSD.org Message-ID: <20100609172759.5feedb2a@epia.mmbb.org> Organization: The Ministers and Missionaries Benefit Board X-Mailer: Claws Mail 3.7.6 (GTK+ 2.20.1; i386-portbld-freebsd8.0) Mime-Version: 1.0 Content-Type: multipart/mixed; boundary="MP_/uFrsy+SJc7n+qs408z1xX0u" X-Content-Filtered-By: Mailman/MimeDel 2.1.5 Cc: Subject: faac fails in configure script X-BeenThere: freebsd-multimedia@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: Multimedia discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 09 Jun 2010 21:56:16 -0000 --MP_/uFrsy+SJc7n+qs408z1xX0u Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: base64 Content-Disposition: inline LS0tLS1CRUdJTiBQR1AgU0lHTkVEIE1FU1NBR0UtLS0tLQ0KSGFzaDogU0hBMQ0KDQpJIGFtIGdl dHRpbmcgdGhlIGZvbGxvd2luZyBlcnJvcjoNCg0KY2QgL3Vzci9wb3J0cy9hdWRpby9mYWFjDQpt YWtlDQoNCi4uLg0KY2hlY2tpbmcgZm9yIEMgY29tcGlsZXIgZGVmYXVsdCBvdXRwdXQgZmlsZSBu YW1lLi4uIGEub3V0DQpjaGVja2luZyB3aGV0aGVyIHRoZSBDIGNvbXBpbGVyIHdvcmtzLi4uIHll cw0KY2hlY2tpbmcgd2hldGhlciB3ZSBhcmUgY3Jvc3MgY29tcGlsaW5nLi4uIG5vDQpjaGVja2lu ZyBmb3Igc3VmZml4IG9mIGV4ZWN1dGFibGVzLi4uIA0KY2hlY2tpbmcgZm9yIHN1ZmZpeCBvZiBv YmplY3QgZmlsZXMuLi4gbw0KY2hlY2tpbmcgd2hldGhlciB3ZSBhcmUgdXNpbmcgdGhlIEdOVSBD IGNvbXBpbGVyLi4uIHllcw0KY2hlY2tpbmcgd2hldGhlciBjYyBhY2NlcHRzIC1nLi4uIHllcw0K Y2hlY2tpbmcgZm9yIGNjIG9wdGlvbiB0byBhY2NlcHQgSVNPIEM4OS4uLiBub25lIG5lZWRlZA0K Y2hlY2tpbmcgZm9yIHN0eWxlIG9mIGluY2x1ZGUgdXNlZCBieSBnbWFrZS4uLiBHTlUNCmNoZWNr aW5nIGRlcGVuZGVuY3kgc3R5bGUgb2YgY2MuLi4gZ2NjMw0KY2hlY2tpbmcgd2hldGhlciB3ZSBh cmUgdXNpbmcgdGhlIEdOVSBDKysgY29tcGlsZXIuLi4geWVzDQpjaGVja2luZyB3aGV0aGVyIGMr KyBhY2NlcHRzIC1nLi4uIHllcw0KY2hlY2tpbmcgZGVwZW5kZW5jeSBzdHlsZSBvZiBjKysuLi4g Z2NjMw0KLi9jb25maWd1cmU6IDQxNjg6IFN5bnRheCBlcnJvcjogd29yZCB1bmV4cGVjdGVkIChl eHBlY3RpbmcgIikiKQ0KPT09PiAgU2NyaXB0ICJjb25maWd1cmUiIGZhaWxlZCB1bmV4cGVjdGVk bHkuDQpQbGVhc2UgcmVwb3J0IHRoZSBwcm9ibGVtIHRvIG11bHRpbWVkaWFARnJlZUJTRC5vcmcg W21haW50YWluZXJdIGFuZCBhdHRhY2gNCnRoZSAiL3Vzci9wb3J0cy9hdWRpby9mYWFjL3dvcmsv ZmFhYy0xLjI4L2NvbmZpZy5sb2ciIGluY2x1ZGluZyB0aGUgb3V0cHV0DQpvZiB0aGUgZmFpbHVy ZSBvZiB5b3VyIG1ha2UgY29tbWFuZC4gQWxzbywgaXQgbWlnaHQgYmUgYSBnb29kIGlkZWEgdG8g cHJvdmlkZQ0KYW4gb3ZlcnZpZXcgb2YgYWxsIHBhY2thZ2VzIGluc3RhbGxlZCBvbiB5b3VyIHN5 c3RlbSAoZS5nLiBhbiBgbHMNCi92YXIvZGIvcGtnYCkuDQoqKiogRXJyb3IgY29kZSAxDQoNClN0 b3AgaW4gL3Vzci9wb3J0cy9hdWRpby9mYWFjLg0KDQpUaGFua3MgaW4gYWR2YW5jZQ0KLSAtLSAN Ckw4Ug0KDQpZb3UgYXJlIHJpZ2h0IG9uIHRhcmdldCB3aGVuIHlvdSBzYXkgdGhhdCBtYWQgc2Np ZW50aXN0cyBoYXZlIGEgdG90YWwgZGlzcmVnYXJkIGZvciB0aGUgd2VsbGJlaW5nIG9mIG90aGVy cy4gV2UgZG9uJ3Qgd2FudCB0byBzcHJlYWQgZXZpbDsgd2UganVzdCBzZWUgbm8gcG9pbnQgaW4g Ym90aGVyaW5nIHRvIHNwcmVhZCBnb29kLg0KLSAtLSBSaWNoYXJkIE0gTWF0aGV3cw0KICAgICAg IF9fDQogICAgICAvLy8NCiBfXyAgLy8vDQogXFxcLy8vDQogIFxYWC8gICAgICAgICBGcmVlQlNE IDgtU1RBQkxFDQotLS0tLUJFR0lOIFBHUCBTSUdOQVRVUkUtLS0tLQ0KVmVyc2lvbjogR251UEcg djIuMC4xNCAoRnJlZUJTRCkNCg0KaUVZRUFSRUNBQVlGQWt3UUIyUUFDZ2tRME5ydjhFK0J5MzNM elFDZ2k0SVg5WXhkdlZsMElsd2VlY0xnN05VTQ0KbkxrQW4yaE9rMFpZRWl0azIwRUh6cnlhbmd2 M0ZCUUcNCj1QUmd1DQotLS0tLUVORCBQR1AgU0lHTkFUVVJFLS0tLS0NCg== --MP_/uFrsy+SJc7n+qs408z1xX0u-- From owner-freebsd-multimedia@FreeBSD.ORG Thu Jun 10 01:22:32 2010 Return-Path: Delivered-To: freebsd-multimedia@hub.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 829E7106564A; Thu, 10 Jun 2010 01:22:32 +0000 (UTC) (envelope-from linimon@FreeBSD.org) Received: from freefall.freebsd.org (unknown [IPv6:2001:4f8:fff6::28]) by mx1.freebsd.org (Postfix) with ESMTP id 5906C8FC14; Thu, 10 Jun 2010 01:22:32 +0000 (UTC) Received: from freefall.freebsd.org (localhost [127.0.0.1]) by freefall.freebsd.org (8.14.4/8.14.4) with ESMTP id o5A1MW8A012078; Thu, 10 Jun 2010 01:22:32 GMT (envelope-from linimon@freefall.freebsd.org) Received: (from linimon@localhost) by freefall.freebsd.org (8.14.4/8.14.4/Submit) id o5A1MWCD012074; Thu, 10 Jun 2010 01:22:32 GMT (envelope-from linimon) Date: Thu, 10 Jun 2010 01:22:32 GMT Message-Id: <201006100122.o5A1MWCD012074@freefall.freebsd.org> To: linimon@FreeBSD.org, freebsd-ports-bugs@FreeBSD.org, freebsd-multimedia@FreeBSD.org From: linimon@FreeBSD.org Cc: Subject: Re: ports/147742: multimedia/gstreamer-plugins-v4l2 fails to install from ports X-BeenThere: freebsd-multimedia@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: Multimedia discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 10 Jun 2010 01:22:32 -0000 Old Synopsis: gstreamer-plugins-v4l2 fails to install from ports New Synopsis: multimedia/gstreamer-plugins-v4l2 fails to install from ports Responsible-Changed-From-To: freebsd-ports-bugs->freebsd-multimedia Responsible-Changed-By: linimon Responsible-Changed-When: Thu Jun 10 01:21:12 UTC 2010 Responsible-Changed-Why: Fix synopsis and assign. http://www.freebsd.org/cgi/query-pr.cgi?pr=147742 From owner-freebsd-multimedia@FreeBSD.ORG Thu Jun 10 08:51:50 2010 Return-Path: Delivered-To: freebsd-multimedia@hub.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 356231065674; Thu, 10 Jun 2010 08:51:50 +0000 (UTC) (envelope-from kwm@FreeBSD.org) Received: from freefall.freebsd.org (unknown [IPv6:2001:4f8:fff6::28]) by mx1.freebsd.org (Postfix) with ESMTP id 0DAE38FC0C; Thu, 10 Jun 2010 08:51:50 +0000 (UTC) Received: from freefall.freebsd.org (localhost [127.0.0.1]) by freefall.freebsd.org (8.14.4/8.14.4) with ESMTP id o5A8pnWr041015; Thu, 10 Jun 2010 08:51:49 GMT (envelope-from kwm@freefall.freebsd.org) Received: (from kwm@localhost) by freefall.freebsd.org (8.14.4/8.14.4/Submit) id o5A8pn7S041011; Thu, 10 Jun 2010 08:51:49 GMT (envelope-from kwm) Date: Thu, 10 Jun 2010 08:51:49 GMT Message-Id: <201006100851.o5A8pn7S041011@freefall.freebsd.org> To: smallcms@gmail.com, kwm@FreeBSD.org, freebsd-multimedia@FreeBSD.org From: kwm@FreeBSD.org Cc: Subject: Re: ports/147742: multimedia/gstreamer-plugins-v4l2 fails to install from ports X-BeenThere: freebsd-multimedia@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: Multimedia discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 10 Jun 2010 08:51:50 -0000 Synopsis: multimedia/gstreamer-plugins-v4l2 fails to install from ports State-Changed-From-To: open->closed State-Changed-By: kwm State-Changed-When: Thu Jun 10 08:50:44 UTC 2010 State-Changed-Why: Fix committed thanks! http://www.freebsd.org/cgi/query-pr.cgi?pr=147742 From owner-freebsd-multimedia@FreeBSD.ORG Thu Jun 10 09:00:13 2010 Return-Path: Delivered-To: freebsd-multimedia@hub.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 203421065676 for ; Thu, 10 Jun 2010 09:00:13 +0000 (UTC) (envelope-from gnats@FreeBSD.org) Received: from freefall.freebsd.org (unknown [IPv6:2001:4f8:fff6::28]) by mx1.freebsd.org (Postfix) with ESMTP id 106128FC15 for ; Thu, 10 Jun 2010 09:00:13 +0000 (UTC) Received: from freefall.freebsd.org (localhost [127.0.0.1]) by freefall.freebsd.org (8.14.4/8.14.4) with ESMTP id o5A90CdE041293 for ; Thu, 10 Jun 2010 09:00:12 GMT (envelope-from gnats@freefall.freebsd.org) Received: (from gnats@localhost) by freefall.freebsd.org (8.14.4/8.14.4/Submit) id o5A90CEg041284; Thu, 10 Jun 2010 09:00:12 GMT (envelope-from gnats) Date: Thu, 10 Jun 2010 09:00:12 GMT Message-Id: <201006100900.o5A90CEg041284@freefall.freebsd.org> To: freebsd-multimedia@FreeBSD.org From: dfilter@FreeBSD.ORG (dfilter service) Cc: Subject: Re: ports/147742: commit references a PR X-BeenThere: freebsd-multimedia@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: dfilter service List-Id: Multimedia discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 10 Jun 2010 09:00:13 -0000 The following reply was made to PR ports/147742; it has been noted by GNATS. From: dfilter@FreeBSD.ORG (dfilter service) To: bug-followup@FreeBSD.org Cc: Subject: Re: ports/147742: commit references a PR Date: Thu, 10 Jun 2010 08:50:34 +0000 (UTC) kwm 2010-06-10 08:50:25 UTC FreeBSD ports repository Modified files: multimedia/gstreamer-plugins Makefile.common Log: Only depend on webcamd for the v4l2 plugin, if we are on 8.0 or higher. PR: ports/147742 Submitted by: Dmitry Revision Changes Path 1.108 +3 -1 ports/multimedia/gstreamer-plugins/Makefile.common _______________________________________________ cvs-all@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/cvs-all To unsubscribe, send any mail to "cvs-all-unsubscribe@freebsd.org" From owner-freebsd-multimedia@FreeBSD.ORG Fri Jun 11 12:58:31 2010 Return-Path: Delivered-To: freebsd-multimedia@FreeBSD.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 4BF381065672 for ; Fri, 11 Jun 2010 12:58:31 +0000 (UTC) (envelope-from torfinn.ingolfsen@broadpark.no) Received: from thalia-smout.broadpark.no (thalia-smout.broadpark.no [80.202.8.21]) by mx1.freebsd.org (Postfix) with ESMTP id 0025C8FC1E for ; Fri, 11 Jun 2010 12:58:30 +0000 (UTC) MIME-version: 1.0 Content-transfer-encoding: 7BIT Content-type: text/plain; CHARSET=US-ASCII Received: from ignis-smin.broadpark.no ([unknown] [80.202.8.11]) by thalia-smout.broadpark.no (Sun Java(tm) System Messaging Server 7u3-12.01 64bit (built Oct 15 2009)) with ESMTP id <0L3U00DCLPDFAQB0@thalia-smout.broadpark.no> for freebsd-multimedia@FreeBSD.org; Fri, 11 Jun 2010 14:58:27 +0200 (CEST) Received: from kg-v2.kg4.no ([unknown] [80.203.92.186]) by ignis-smin.broadpark.no (Sun Java(tm) System Messaging Server 7u3-12.01 64bit (built Oct 15 2009)) with SMTP id <0L3U00GPRPDFKOQ0@ignis-smin.broadpark.no> for freebsd-multimedia@FreeBSD.org; Fri, 11 Jun 2010 14:58:27 +0200 (CEST) Date: Fri, 11 Jun 2010 14:58:27 +0200 From: Torfinn Ingolfsen To: freebsd-multimedia@FreeBSD.org Message-id: <20100611145827.105d821b.torfinn.ingolfsen@broadpark.no> In-reply-to: <1274785448.70783.TMDA@ncolin.muc.de> References: <201005212042.42604.shoesoft@gmx.net> <20100521165407.5a7da822.torfinn.ingolfsen@broadpark.no> <20100522130442.7dd0c114.torfinn.ingolfsen@broadpark.no> <20100520215645.0f506ba7.torfinn.ingolfsen@broadpark.no> <20100521105145.56bcd718.torfinn.ingolfsen@broadpark.no> <20100522145858.fe653d29.torfinn.ingolfsen@broadpark.no> <20100522143931.23418.qmail@ncolin.muc.de> <20100524124936.a88dfbf5.torfinn.ingolfsen@broadpark.no> <1274785448.70783.TMDA@ncolin.muc.de> X-Mailer: Sylpheed 3.0.2 (GTK+ 2.20.1; amd64-portbld-freebsd8.0) X-Face: "t9w2,-X@O^I`jVW\sonI3.,36KBLZE*AL[y9lL[PyFD*r_S:dIL9c[8Y>V42R0"!"yb_zN,f#%.[PYYNq; m"_0v; ~rUM2Yy!zmkh)3&U|u!=T(zyv,MHJv"nDH>OJ`t(@mil461d_B'Uo|'nMwlKe0Mv=kvV?Nh@>Hb<3s_z2jYgZhPb@?Wi^x1a~Hplz1.zH Cc: Subject: Re: usleep's pvrxxx port and FreeBSD 8.0-stable X-BeenThere: freebsd-multimedia@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: Multimedia discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 11 Jun 2010 12:58:31 -0000 On Tue, 25 May 2010 13:04:07 +0200 Armin Gruner wrote: > Ops, sorry for that! I must have fooled me when bundling the patchsets together. > > I've just checked that both build & kldload works for the updated port dir: > > http://www.muc.de/~ag/pvrxxx-20080409_1.tgz > > Could you retry with this one? Finally found time to test that one. Yes, the one referenced above compiles and install without trouble here. > About your previous posting: > > > Update: > > Ok, I have tested the port with mplayer, and it works (at least for > > video, for some reason my quick test didn't have any audio. Might be a > > problem with mplayer). > > Did you set the tuner input explicit? (read: pvr250-setchannel -t) Yes, I did (I always do). > After boot/kldload, the audio output defaults to the rear connector > and not the mpeg stream.. Good to know. -- Regards, Torfinn Ingolfsen From owner-freebsd-multimedia@FreeBSD.ORG Fri Jun 11 13:04:42 2010 Return-Path: Delivered-To: multimedia@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 6846B1065672 for ; Fri, 11 Jun 2010 13:04:42 +0000 (UTC) (envelope-from SamanKaya@netscape.net) Received: from imr-ma02.mx.aol.com (imr-ma02.mx.aol.com [64.12.206.40]) by mx1.freebsd.org (Postfix) with ESMTP id 289138FC17 for ; Fri, 11 Jun 2010 13:04:41 +0000 (UTC) Received: from mtaout-da02.r1000.mx.aol.com (mtaout-da02.r1000.mx.aol.com [172.29.51.130]) by imr-ma02.mx.aol.com (8.14.1/8.14.1) with ESMTP id o5BD4PQp000490 for ; Fri, 11 Jun 2010 09:04:32 -0400 Received: from [192.168.0.51] (unknown [85.105.64.2]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (No client certificate requested) by mtaout-da02.r1000.mx.aol.com (MUA/Third Party Client Interface) with ESMTPSA id A7B82E0000BE for ; Fri, 11 Jun 2010 09:04:30 -0400 (EDT) Message-ID: <4C1233A0.1070302@netscape.net> Date: Fri, 11 Jun 2010 16:01:20 +0300 From: Kaya Saman User-Agent: Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.1.9) Gecko/20100317 Thunderbird/3.0.4 MIME-Version: 1.0 To: multimedia@freebsd.org References: <4C0B56BF.1020908@netscape.net> <4C0F7273.8010108@netscape.net> <20100610012011.T27982@sola.nimnet.asn.au> <4C0FD66F.9060605@netscape.net> In-Reply-To: <4C0FD66F.9060605@netscape.net> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit x-aol-global-disposition: G X-AOL-SCOLL-SCORE: 0:2:497256800:93952408 X-AOL-SCOLL-URL_COUNT: 0 x-aol-sid: 3039ac1d33824c12345e433e X-AOL-IP: 85.105.64.2 Cc: Subject: Re: Setting audio input source for Darkice using mixer: can't set vol?? X-BeenThere: freebsd-multimedia@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: Multimedia discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 11 Jun 2010 13:04:42 -0000 Ok so since no one is able to answer or help out with the below; is there any way of taking the output of XMMS2 and digitally routing it to the input of Darkice??? I don't want to connect a whole bunch of analog cables and especially not one from output to input as I need the output to listen but also need to get a duplicate to be able to stream...... Is anyone able to advise me at all???? Many thanks, Kaya On 09/06/2010 20:59, Kaya Saman wrote: > On Wed, Jun 9, 2010 at 11:52 AM, Kaya Saman > wrote: > >> > Hi guys, >> > >> > just want to bump this as it's been a few days!! >> > >> > Am too new on FreeBSD to diagnose the issue myself or have the >> experience to >> > know where this problem is coming from so I hope someone can help?? >> > >> > Thanks, >> > >> > Kaya >> > > It's unclear what your problem is. You cannot set 'vol' as a recording > source, it is an output device. You conclude correctly that your > recording devices are mic and mix. > > Cheers > > Tom > > > > On 06/09/2010 06:44 PM, Ian Smith wrote: >> On Wed, 9 Jun 2010, Kaya Saman wrote: >> > Hi guys, >> > >> > just want to bump this as it's been a few days!! >> > >> > Am too new on FreeBSD to diagnose the issue myself or have the >> experience to >> > know where this problem is coming from so I hope someone can help?? >> > >> > Thanks, >> > >> > Kaya >> > >> > >> > On 06/06/2010 11:05, Kaya Saman wrote: >> > > Hi, >> > > >> > > am trying to set pcm or vol as the input source for my mixer in >> order to be >> > > used in conjunction with Darkice. >> > > >> > > For Darkice I have already set input as /dev/dsp which should be >> ok as >> > > /dev/dsp0.0 comes up when using ls /dev..... however, I had this >> config >> > > working on another box so from what I can tell the 0.0 just >> gives the >> > > amount of simultaneous channels if I'm not mistaken. >> > > >> > > The major difficulty however is coming from the fact that I >> can't set the >> > > rec input to be pcm or vol :-( >> > > >> > > pciconf -lv shows this: >> > > >> > > hdac0@pci0:0:27:0: class=0x040300 card=0x50038086 >> chip=0x3a3e8086 >> > > rev=0x00 hdr=0x00 >> > > vendor = 'Intel Corporation' >> > > device = 'HD Audio Controller' >> > > class = multimedia >> > > subclass = HDA >> > > >> > > and as both Andrew Thompson and Frank Shute helped me last time >> getting: >> > > >> > > snd_hda_load="YES" >> > > >> > > into /boot/loader.conf audio works without any problem too as >> have tested >> > > playback!! >> > > >> > > If I try to set: >> > > >> > > # mixer =rec vol >> > > mixer: unknown recording device: vol >> > > usage: mixer [-f device] [-s | -S] [dev [+|-][voll[:[+|-]volr]] ... >> > > mixer [-f device] [-s | -S] recsrc ... >> > > mixer [-f device] [-s | -S] {^|+|-|=}rec rdev ... >> > > devices: vol, pcm, speaker, mic, mix, rec >> > > rec devices: mic, mix >> > > >> > > I just get that the rec interfaces are mic or mix?? This is not >> the same as >> > > my other box using a different and much older integral sound chip. >> >> Seeing noone else has pounced .. we run Darkice for audio logging, but a >> hacked version of edcast_jack for streaming, and that on a Debian box >> using jackd and ALSA to split the feed to both of them, which may not >> seem relevant at all .. but we use Mix as the recording device, zeroing >> levels and muting all channels we're not using (mic, pcm, CD etc). We >> record from Line and set levels on that, but it works the same using >> just pcm in the mix instead. >> >> Not what you asked I know, but it may work ok for you .. with digital >> mixing with everything else off or zero, there's no degradation. >> >> HTH, Ian >> >> > > I also attempted to comment the snd_hda_load out of >> /boot/loader.conf and >> > > include this instead: >> > > >> > > snd_driver_load="YES" >> > > >> > > which basically did the same thing as the above with (so also a >> small >> > > question here about which line is better?) so yeah am stuck with >> both >> > > kernel module loaders providing the same output :-( >> > > >> > > Is there a way other then feeding a cable from the output into >> the input to >> > > rectify this issue?? >> > > >> > > Thanks, >> > > >> > > Kaya > > Thanks Ian and Tom for the responses :-) > > Tom I'm just going to quote you again: " > > It's unclear what your problem is. You cannot set 'vol' as a recording > source, it is an output device. > > " > > Actually the box that's sitting in front of me can do this: > > $ mixer > Mixer vol is currently set to 75:75 > Mixer pcm is currently set to 75:75 > Mixer speaker is currently set to 75:75 > Mixer line is currently set to 75:75 > Mixer mic is currently set to 0:0 > Mixer cd is currently set to 75:75 > Mixer rec is currently set to 0:0 > Mixer igain is currently set to 0:0 > Mixer ogain is currently set to 50:50 > Mixer line1 is currently set to 75:75 > Mixer phin is currently set to 0:0 > Mixer phout is currently set to 0:0 > Recording source: vol > > Of course it's a totally different system running FreeBSD 8.0 RELEASE > 32bit as opposed to 64bit. Also it has a much older sound card which > may have better support?? > > Anyway this is what I'm after as currently I can't get my > Darkice/Icecase2/Drupal5 streaming service working as there's no sound > input!! > > I think it's probably just the driver for the HD audio interface in my > view. But how to sort or who to go to, to help sort?? > > Regards, > > Kaya > _______________________________________________ > freebsd-multimedia@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-multimedia > To unsubscribe, send any mail to > "freebsd-multimedia-unsubscribe@freebsd.org" From owner-freebsd-multimedia@FreeBSD.ORG Fri Jun 11 13:15:29 2010 Return-Path: Delivered-To: freebsd-multimedia@FreeBSD.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 736CE1065678 for ; Fri, 11 Jun 2010 13:15:29 +0000 (UTC) (envelope-from torfinn.ingolfsen@broadpark.no) Received: from thalia-smout.broadpark.no (thalia-smout.broadpark.no [80.202.8.21]) by mx1.freebsd.org (Postfix) with ESMTP id 291088FC19 for ; Fri, 11 Jun 2010 13:15:28 +0000 (UTC) MIME-version: 1.0 Content-transfer-encoding: 7BIT Content-type: text/plain; CHARSET=US-ASCII Received: from ignis-smin.broadpark.no ([unknown] [80.202.8.11]) by thalia-smout.broadpark.no (Sun Java(tm) System Messaging Server 7u3-12.01 64bit (built Oct 15 2009)) with ESMTP id <0L3U00EW7Q5R7830@thalia-smout.broadpark.no> for freebsd-multimedia@FreeBSD.org; Fri, 11 Jun 2010 15:15:27 +0200 (CEST) Received: from kg-v2.kg4.no ([unknown] [80.203.92.186]) by ignis-smin.broadpark.no (Sun Java(tm) System Messaging Server 7u3-12.01 64bit (built Oct 15 2009)) with SMTP id <0L3U00EQTQ5R2031@ignis-smin.broadpark.no> for freebsd-multimedia@FreeBSD.org; Fri, 11 Jun 2010 15:15:27 +0200 (CEST) Date: Fri, 11 Jun 2010 15:15:27 +0200 From: Torfinn Ingolfsen To: freebsd-multimedia@FreeBSD.org Message-id: <20100611151527.b8601ccf.torfinn.ingolfsen@broadpark.no> In-reply-to: <20100522145858.fe653d29.torfinn.ingolfsen@broadpark.no> References: <20100520215645.0f506ba7.torfinn.ingolfsen@broadpark.no> <20100521105145.56bcd718.torfinn.ingolfsen@broadpark.no> <20100521165407.5a7da822.torfinn.ingolfsen@broadpark.no> <201005212042.42604.shoesoft@gmx.net> <20100522130442.7dd0c114.torfinn.ingolfsen@broadpark.no> <20100522145858.fe653d29.torfinn.ingolfsen@broadpark.no> X-Mailer: Sylpheed 3.0.2 (GTK+ 2.20.1; amd64-portbld-freebsd8.0) X-Face: "t9w2,-X@O^I`jVW\sonI3.,36KBLZE*AL[y9lL[PyFD*r_S:dIL9c[8Y>V42R0"!"yb_zN,f#%.[PYYNq; m"_0v; ~rUM2Yy!zmkh)3&U|u!=T(zyv,MHJv"nDH>OJ`t(@mil461d_B'Uo|'nMwlKe0Mv=kvV?Nh@>Hb<3s_z2jYgZhPb@?Wi^x1a~Hplz1.zH Cc: Subject: Re: usleep's pvrxxx port and FreeBSD 8.0-stable X-BeenThere: freebsd-multimedia@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: Multimedia discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 11 Jun 2010 13:15:29 -0000 On Sat, 22 May 2010 14:58:58 +0200 Torfinn Ingolfsen wrote: > Update: > Ok, I have tested the port with mplayer, and it works (at least for > video, for some reason my quick test didn't have any audio. Might be a > problem with mplayer). Update: mplayer works fine with older files recorded with MythTV. However if I now do 'cat /dev/cxm0 > test.mpg' I get a nice file and according to mplayer output it has both video and audio frames, but I can't hear no sound. Output: tingo@kg-fil$ gmplayer test.mpg MPlayer SVN-r30341-snapshot-4.2.1 (C) 2000-2009 MPlayer Team Playing /usr/home/tingo/work/test.mpg. Cache fill: 0.00% (0 bytes) MPEG-PS file format detected. VIDEO: MPEG2 720x576 (aspect 2) 25.000 fps 9520.0 kbps (1190.0 kbyte/s) ========================================================================== Opening video decoder: [mpegpes] MPEG 1/2 Video passthrough Could not find matching colorspace - retrying with -vf scale... Opening video filter: [scale] The selected video_out device is incompatible with this codec. Try appending the scale filter to your filter list, e.g. -vf spp,scale instead of -vf spp. VDecoder init failed :( Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family Selected video codec: [ffmpeg2] vfm: ffmpeg (FFmpeg MPEG-2) ========================================================================== ========================================================================== Opening audio decoder: [ffmpeg] FFmpeg/libavcodec audio decoders AUDIO: 48000 Hz, 2 ch, s16le, 384.0 kbit/25.00% (ratio: 48000->192000) Selected audio codec: [ffmp2] afm: ffmpeg (FFmpeg MPEG layer-1 and layer-2 audio) ========================================================================== AO: [oss] 48000Hz 2ch s16le (2 bytes per sample) Starting playback... Movie-Aspect is 1.33:1 - prescaling to correct movie aspect. VO: [xv] 720x576 => 768x576 Planar YV12 [mpeg2video @ 0xc15940]warning: first frame is no keyframe [VD_FFMPEG] DRI failure. [mpeg2video @ 0xc15940]warning: first frame is no keyframe?,?% 0 0 94% [mp2 @ 0xc15940]incomplete frame: -0.075 1111/1111 12% 2% 0.7% 3 0 0% A: 44.9 V: 44.9 A-V: 0.006 ct: -0.076 1116/1116 12% 2% 0.7% 3 0 0% tingo@kg-fil$ I really don't know how to debug this. I've used pvr250-setchannel -d 0 -t and pvr250-setchannel -d 0 147.25 prior to my testing with mplayer. I have used both plain gmplayer, and gmaplayer -cache 8192, it doesn't make a difference. -- Regards, Torfinn Ingolfsen From owner-freebsd-multimedia@FreeBSD.ORG Fri Jun 11 17:20:33 2010 Return-Path: Delivered-To: multimedia@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id C9072106566C for ; Fri, 11 Jun 2010 17:20:33 +0000 (UTC) (envelope-from smithi@nimnet.asn.au) Received: from sola.nimnet.asn.au (paqi.nimnet.asn.au [115.70.110.159]) by mx1.freebsd.org (Postfix) with ESMTP id EAF628FC1D for ; Fri, 11 Jun 2010 17:20:32 +0000 (UTC) Received: from localhost (localhost [127.0.0.1]) by sola.nimnet.asn.au (8.14.2/8.14.2) with ESMTP id o5BHKUZC011488; Sat, 12 Jun 2010 03:20:30 +1000 (EST) (envelope-from smithi@nimnet.asn.au) Date: Sat, 12 Jun 2010 03:20:30 +1000 (EST) From: Ian Smith To: Kaya Saman In-Reply-To: <4C1233A0.1070302@netscape.net> Message-ID: <20100612030033.I27982@sola.nimnet.asn.au> References: <4C0B56BF.1020908@netscape.net> <4C0F7273.8010108@netscape.net> <20100610012011.T27982@sola.nimnet.asn.au> <4C0FD66F.9060605@netscape.net> <4C1233A0.1070302@netscape.net> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Cc: multimedia@freebsd.org Subject: Re: Setting audio input source for Darkice using mixer: can't set vol?? X-BeenThere: freebsd-multimedia@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: Multimedia discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 11 Jun 2010 17:20:33 -0000 On Fri, 11 Jun 2010, Kaya Saman wrote: > Ok so since no one is able to answer or help out with the below; is there any > way of taking the output of XMMS2 and digitally routing it to the input of > Darkice??? mixer =rec mix and setting the level on pcm doesn't work for you? > I don't want to connect a whole bunch of analog cables and especially not one > from output to input as I need the output to listen but also need to get a > duplicate to be able to stream...... > > Is anyone able to advise me at all???? Have a look at ports audio/jack and audio/xmms-jack (and friends); software audio routing sure beats mucking around with cables, not to mention avoiding loss of quality going digital -> analogue -> digital. Disclaimer: I haven't used jack on FreeBSD yet myself, only on Debian. I assume someone would have said something if it doesn't work .. cheers, Ian > Many thanks, > > Kaya > > > On 09/06/2010 20:59, Kaya Saman wrote: > > On Wed, Jun 9, 2010 at 11:52 AM, Kaya Saman wrote: > > > > > > Hi guys, > > > > > > > > just want to bump this as it's been a few days!! > > > > > > > > Am too new on FreeBSD to diagnose the issue myself or have the > > > experience to > > > > know where this problem is coming from so I hope someone can help?? > > > > > > > > Thanks, > > > > > > > > Kaya > > > > > > It's unclear what your problem is. You cannot set 'vol' as a recording > > source, it is an output device. You conclude correctly that your > > recording devices are mic and mix. > > > > Cheers > > > > Tom > > > > > > > > On 06/09/2010 06:44 PM, Ian Smith wrote: > > > On Wed, 9 Jun 2010, Kaya Saman wrote: > > > > Hi guys, > > > > > > > > just want to bump this as it's been a few days!! > > > > > > > > Am too new on FreeBSD to diagnose the issue myself or have the > > > experience to > > > > know where this problem is coming from so I hope someone can help?? > > > > > > > > Thanks, > > > > > > > > Kaya > > > > > > > > > > > > On 06/06/2010 11:05, Kaya Saman wrote: > > > > > Hi, > > > > > > > > > > am trying to set pcm or vol as the input source for my mixer in > > > order to be > > > > > used in conjunction with Darkice. > > > > > > > > > > For Darkice I have already set input as /dev/dsp which should be ok > > > as > > > > > /dev/dsp0.0 comes up when using ls /dev..... however, I had this > > > config > > > > > working on another box so from what I can tell the 0.0 just gives > > > the > > > > > amount of simultaneous channels if I'm not mistaken. > > > > > > > > > > The major difficulty however is coming from the fact that I can't > > > set the > > > > > rec input to be pcm or vol :-( > > > > > > > > > > pciconf -lv shows this: > > > > > > > > > > hdac0@pci0:0:27:0: class=0x040300 card=0x50038086 chip=0x3a3e8086 > > > > > rev=0x00 hdr=0x00 > > > > > vendor = 'Intel Corporation' > > > > > device = 'HD Audio Controller' > > > > > class = multimedia > > > > > subclass = HDA > > > > > > > > > > and as both Andrew Thompson and Frank Shute helped me last time > > > getting: > > > > > > > > > > snd_hda_load="YES" > > > > > > > > > > into /boot/loader.conf audio works without any problem too as have > > > tested > > > > > playback!! > > > > > > > > > > If I try to set: > > > > > > > > > > # mixer =rec vol > > > > > mixer: unknown recording device: vol > > > > > usage: mixer [-f device] [-s | -S] [dev [+|-][voll[:[+|-]volr]] ... > > > > > mixer [-f device] [-s | -S] recsrc ... > > > > > mixer [-f device] [-s | -S] {^|+|-|=}rec rdev ... > > > > > devices: vol, pcm, speaker, mic, mix, rec > > > > > rec devices: mic, mix > > > > > > > > > > I just get that the rec interfaces are mic or mix?? This is not the > > > same as > > > > > my other box using a different and much older integral sound chip. > > > > > > Seeing noone else has pounced .. we run Darkice for audio logging, but a > > > hacked version of edcast_jack for streaming, and that on a Debian box > > > using jackd and ALSA to split the feed to both of them, which may not > > > seem relevant at all .. but we use Mix as the recording device, zeroing > > > levels and muting all channels we're not using (mic, pcm, CD etc). We > > > record from Line and set levels on that, but it works the same using > > > just pcm in the mix instead. > > > > > > Not what you asked I know, but it may work ok for you .. with digital > > > mixing with everything else off or zero, there's no degradation. > > > > > > HTH, Ian > > > > > > > > I also attempted to comment the snd_hda_load out of > > > /boot/loader.conf and > > > > > include this instead: > > > > > > > > > > snd_driver_load="YES" > > > > > > > > > > which basically did the same thing as the above with (so also a > > > small > > > > > question here about which line is better?) so yeah am stuck with > > > both > > > > > kernel module loaders providing the same output :-( > > > > > > > > > > Is there a way other then feeding a cable from the output into the > > > input to > > > > > rectify this issue?? > > > > > > > > > > Thanks, > > > > > > > > > > Kaya > > > > Thanks Ian and Tom for the responses :-) > > > > Tom I'm just going to quote you again: " > > > > It's unclear what your problem is. You cannot set 'vol' as a recording > > source, it is an output device. > > > > " > > > > Actually the box that's sitting in front of me can do this: > > > > $ mixer > > Mixer vol is currently set to 75:75 > > Mixer pcm is currently set to 75:75 > > Mixer speaker is currently set to 75:75 > > Mixer line is currently set to 75:75 > > Mixer mic is currently set to 0:0 > > Mixer cd is currently set to 75:75 > > Mixer rec is currently set to 0:0 > > Mixer igain is currently set to 0:0 > > Mixer ogain is currently set to 50:50 > > Mixer line1 is currently set to 75:75 > > Mixer phin is currently set to 0:0 > > Mixer phout is currently set to 0:0 > > Recording source: vol > > > > Of course it's a totally different system running FreeBSD 8.0 RELEASE 32bit > > as opposed to 64bit. Also it has a much older sound card which may have > > better support?? > > > > Anyway this is what I'm after as currently I can't get my > > Darkice/Icecase2/Drupal5 streaming service working as there's no sound > > input!! > > > > I think it's probably just the driver for the HD audio interface in my > > view. But how to sort or who to go to, to help sort?? > > > > Regards, > > > > Kaya From owner-freebsd-multimedia@FreeBSD.ORG Sat Jun 12 15:35:42 2010 Return-Path: Delivered-To: freebsd-multimedia@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 9AA0A1065763 for ; Sat, 12 Jun 2010 15:35:42 +0000 (UTC) (envelope-from freebsdlists@bsdunix.ch) Received: from conversation.bsdunix.ch (ns1.bsdunix.ch [82.220.1.90]) by mx1.freebsd.org (Postfix) with ESMTP id 56FCD8FC12 for ; Sat, 12 Jun 2010 15:35:42 +0000 (UTC) Received: from localhost (localhost [127.0.0.1]) by conversation.bsdunix.ch (Postfix) with ESMTP id 9CFCC604C for ; Sat, 12 Jun 2010 17:18:14 +0200 (CEST) Received: from conversation.bsdunix.ch ([127.0.0.1]) by localhost (conversation.bsdunix.ch [127.0.0.1]) (amavisd-new, port 10024) with LMTP id WeTqJmHCWgi5 for ; Sat, 12 Jun 2010 17:18:13 +0200 (CEST) Received: from Toms-Kraftbuch.local (dmhd.bsdunix.ch [82.220.17.25]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (No client certificate requested) by conversation.bsdunix.ch (Postfix) with ESMTP id 2560D5E03 for ; Sat, 12 Jun 2010 17:18:12 +0200 (CEST) Message-ID: <4C13A532.50203@bsdunix.ch> Date: Sat, 12 Jun 2010 17:18:10 +0200 From: Thomas Vogt User-Agent: Mozilla/5.0 (Macintosh; U; PPC Mac OS X 10.5; de; rv:1.9.1.9) Gecko/20100317 Thunderbird/3.0.4 MIME-Version: 1.0 To: freebsd-multimedia@freebsd.org Content-Type: text/plain; charset=ISO-8859-15; format=flowed Content-Transfer-Encoding: 7bit Subject: can someone compile segmenter.c for http streaming? X-BeenThere: freebsd-multimedia@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: Multimedia discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 12 Jun 2010 15:35:42 -0000 Hi Has someone succesfully compiled segmenter.c? It can be downloaded at http://svn.assembla.com/svn/legend/segmenter/ It segments the video stream into smaller chunks for http streaming to iphones/ipad .. I could not make it work. Maybe someone can enlight me. I tried to add -I/pathtoffmpegsrc but it didn't help Some information can be found at http://www.ioncannon.net/programming/452/iphone-http-streaming-with-ffmpeg-and-an-open-source-segmenter/. Thanks and cheers Thomas From owner-freebsd-multimedia@FreeBSD.ORG Sat Jun 12 19:13:16 2010 Return-Path: Delivered-To: multimedia@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 2B81E106566C for ; Sat, 12 Jun 2010 19:13:16 +0000 (UTC) (envelope-from SamanKaya@netscape.net) Received: from imr-da05.mx.aol.com (imr-da05.mx.aol.com [205.188.105.147]) by mx1.freebsd.org (Postfix) with ESMTP id E071C8FC0C for ; Sat, 12 Jun 2010 19:13:15 +0000 (UTC) Received: from mtaout-ma02.r1000.mx.aol.com (mtaout-ma02.r1000.mx.aol.com [172.29.41.2]) by imr-da05.mx.aol.com (8.14.1/8.14.1) with ESMTP id o5CJCtdI013161; Sat, 12 Jun 2010 15:12:55 -0400 Received: from [172.16.0.3] (unknown [212.156.209.87]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (No client certificate requested) by mtaout-ma02.r1000.mx.aol.com (MUA/Third Party Client Interface) with ESMTPSA id AF8ACE000126; Sat, 12 Jun 2010 15:12:54 -0400 (EDT) Message-ID: <4C13DC33.4040909@netscape.net> Date: Sat, 12 Jun 2010 22:12:51 +0300 From: Kaya Saman User-Agent: Mozilla/5.0 (X11; U; Linux i686 (x86_64); en-US; rv:1.9.1.8) Gecko/20100227 Lightning/1.0b1 Thunderbird/3.0.3 MIME-Version: 1.0 To: Ian Smith References: <4C0B56BF.1020908@netscape.net> <4C0F7273.8010108@netscape.net> <20100610012011.T27982@sola.nimnet.asn.au> <4C0FD66F.9060605@netscape.net> <4C1233A0.1070302@netscape.net> <20100612030033.I27982@sola.nimnet.asn.au> In-Reply-To: <20100612030033.I27982@sola.nimnet.asn.au> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit x-aol-global-disposition: G X-AOL-SCOLL-SCORE: 0:2:511030560:93952408 X-AOL-SCOLL-URL_COUNT: 0 x-aol-sid: 3039ac1d29024c13dc362b99 X-AOL-IP: 212.156.209.87 Cc: multimedia@freebsd.org Subject: Re: Setting audio input source for Darkice using mixer: can't set vol?? X-BeenThere: freebsd-multimedia@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: Multimedia discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 12 Jun 2010 19:13:16 -0000 On 06/11/2010 08:20 PM, Ian Smith wrote: > On Fri, 11 Jun 2010, Kaya Saman wrote: > > > Ok so since no one is able to answer or help out with the below; is there any > > way of taking the output of XMMS2 and digitally routing it to the input of > > Darkice??? > > mixer =rec mix and setting the level on pcm doesn't work for you? > Erm seems not to??? I got this now: $ mixer Mixer vol is currently set to 100:100 Mixer pcm is currently set to 100:100 Mixer speaker is currently set to 75:75 Mixer mic is currently set to 0:0 Mixer mix is currently set to 100:100 Mixer rec is currently set to 100:100 Recording source: mix The volume is very low with a lot of hiss........... actually quite interestingly sounds like an old cassette! > > I don't want to connect a whole bunch of analog cables and especially not one > > from output to input as I need the output to listen but also need to get a > > duplicate to be able to stream...... > > > > Is anyone able to advise me at all???? > > Have a look at ports audio/jack and audio/xmms-jack (and friends); > software audio routing sure beats mucking around with cables, not to > mention avoiding loss of quality going digital -> analogue -> digital. > > Disclaimer: I haven't used jack on FreeBSD yet myself, only on Debian. > I assume someone would have said something if it doesn't work .. > Hmm.... I might need to as it seems that the drivers internal routing matrix might be missing something. > cheers, Ian > Regards, Kaya > > Many thanks, > > > > Kaya > > > > > > On 09/06/2010 20:59, Kaya Saman wrote: > > > On Wed, Jun 9, 2010 at 11:52 AM, Kaya Saman wrote: > > > > > > > > Hi guys, > > > > > > > > > > just want to bump this as it's been a few days!! > > > > > > > > > > Am too new on FreeBSD to diagnose the issue myself or have the > > > > experience to > > > > > know where this problem is coming from so I hope someone can help?? > > > > > > > > > > Thanks, > > > > > > > > > > Kaya > > > > > > > > It's unclear what your problem is. You cannot set 'vol' as a recording > > > source, it is an output device. You conclude correctly that your > > > recording devices are mic and mix. > > > > > > Cheers > > > > > > Tom > > > > > > > > > > > > On 06/09/2010 06:44 PM, Ian Smith wrote: > > > > On Wed, 9 Jun 2010, Kaya Saman wrote: > > > > > Hi guys, > > > > > > > > > > just want to bump this as it's been a few days!! > > > > > > > > > > Am too new on FreeBSD to diagnose the issue myself or have the > > > > experience to > > > > > know where this problem is coming from so I hope someone can help?? > > > > > > > > > > Thanks, > > > > > > > > > > Kaya > > > > > > > > > > > > > > > On 06/06/2010 11:05, Kaya Saman wrote: > > > > > > Hi, > > > > > > > > > > > > am trying to set pcm or vol as the input source for my mixer in > > > > order to be > > > > > > used in conjunction with Darkice. > > > > > > > > > > > > For Darkice I have already set input as /dev/dsp which should be ok > > > > as > > > > > > /dev/dsp0.0 comes up when using ls /dev..... however, I had this > > > > config > > > > > > working on another box so from what I can tell the 0.0 just gives > > > > the > > > > > > amount of simultaneous channels if I'm not mistaken. > > > > > > > > > > > > The major difficulty however is coming from the fact that I can't > > > > set the > > > > > > rec input to be pcm or vol :-( > > > > > > > > > > > > pciconf -lv shows this: > > > > > > > > > > > > hdac0@pci0:0:27:0: class=0x040300 card=0x50038086 chip=0x3a3e8086 > > > > > > rev=0x00 hdr=0x00 > > > > > > vendor = 'Intel Corporation' > > > > > > device = 'HD Audio Controller' > > > > > > class = multimedia > > > > > > subclass = HDA > > > > > > > > > > > > and as both Andrew Thompson and Frank Shute helped me last time > > > > getting: > > > > > > > > > > > > snd_hda_load="YES" > > > > > > > > > > > > into /boot/loader.conf audio works without any problem too as have > > > > tested > > > > > > playback!! > > > > > > > > > > > > If I try to set: > > > > > > > > > > > > # mixer =rec vol > > > > > > mixer: unknown recording device: vol > > > > > > usage: mixer [-f device] [-s | -S] [dev [+|-][voll[:[+|-]volr]] ... > > > > > > mixer [-f device] [-s | -S] recsrc ... > > > > > > mixer [-f device] [-s | -S] {^|+|-|=}rec rdev ... > > > > > > devices: vol, pcm, speaker, mic, mix, rec > > > > > > rec devices: mic, mix > > > > > > > > > > > > I just get that the rec interfaces are mic or mix?? This is not the > > > > same as > > > > > > my other box using a different and much older integral sound chip. > > > > > > > > Seeing noone else has pounced .. we run Darkice for audio logging, but a > > > > hacked version of edcast_jack for streaming, and that on a Debian box > > > > using jackd and ALSA to split the feed to both of them, which may not > > > > seem relevant at all .. but we use Mix as the recording device, zeroing > > > > levels and muting all channels we're not using (mic, pcm, CD etc). We > > > > record from Line and set levels on that, but it works the same using > > > > just pcm in the mix instead. > > > > > > > > Not what you asked I know, but it may work ok for you .. with digital > > > > mixing with everything else off or zero, there's no degradation. > > > > > > > > HTH, Ian > > > > > > > > > > I also attempted to comment the snd_hda_load out of > > > > /boot/loader.conf and > > > > > > include this instead: > > > > > > > > > > > > snd_driver_load="YES" > > > > > > > > > > > > which basically did the same thing as the above with (so also a > > > > small > > > > > > question here about which line is better?) so yeah am stuck with > > > > both > > > > > > kernel module loaders providing the same output :-( > > > > > > > > > > > > Is there a way other then feeding a cable from the output into the > > > > input to > > > > > > rectify this issue?? > > > > > > > > > > > > Thanks, > > > > > > > > > > > > Kaya > > > > > > Thanks Ian and Tom for the responses :-) > > > > > > Tom I'm just going to quote you again: " > > > > > > It's unclear what your problem is. You cannot set 'vol' as a recording > > > source, it is an output device. > > > > > > " > > > > > > Actually the box that's sitting in front of me can do this: > > > > > > $ mixer > > > Mixer vol is currently set to 75:75 > > > Mixer pcm is currently set to 75:75 > > > Mixer speaker is currently set to 75:75 > > > Mixer line is currently set to 75:75 > > > Mixer mic is currently set to 0:0 > > > Mixer cd is currently set to 75:75 > > > Mixer rec is currently set to 0:0 > > > Mixer igain is currently set to 0:0 > > > Mixer ogain is currently set to 50:50 > > > Mixer line1 is currently set to 75:75 > > > Mixer phin is currently set to 0:0 > > > Mixer phout is currently set to 0:0 > > > Recording source: vol > > > > > > Of course it's a totally different system running FreeBSD 8.0 RELEASE 32bit > > > as opposed to 64bit. Also it has a much older sound card which may have > > > better support?? > > > > > > Anyway this is what I'm after as currently I can't get my > > > Darkice/Icecase2/Drupal5 streaming service working as there's no sound > > > input!! > > > > > > I think it's probably just the driver for the HD audio interface in my > > > view. But how to sort or who to go to, to help sort?? > > > > > > Regards, > > > > > > Kaya >