From owner-freebsd-x11@FreeBSD.ORG Sun May 19 13:20:37 2013 Return-Path: Delivered-To: x11@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by hub.freebsd.org (Postfix) with ESMTP id 3668F7BE for ; Sun, 19 May 2013 13:20:37 +0000 (UTC) (envelope-from portscout@portscout.freebsd.org) Received: from null.zi0r.com (null.zi0r.com [71.245.171.204]) by mx1.freebsd.org (Postfix) with ESMTP id F06A297B for ; Sun, 19 May 2013 13:20:36 +0000 (UTC) Received: from null.zi0r.com (localhost [127.0.0.1]) by null.zi0r.com (8.14.5/8.14.5) with ESMTP id r4JDKUso013846 for ; Sun, 19 May 2013 09:20:30 -0400 (EDT) (envelope-from portscout@null.zi0r.com) Received: (from portscout@localhost) by null.zi0r.com (8.14.5/8.14.5/Submit) id r4JDKU0o013595; Sun, 19 May 2013 09:20:30 -0400 (EDT) (envelope-from portscout) Message-Id: <201305191320.r4JDKU0o013595@null.zi0r.com> MIME-Version: 1.0 Content-Disposition: inline Content-Transfer-Encoding: 8bit Content-Type: text/plain Date: Sun, 19 May 2013 09:20:30 -0400 From: portscout@portscout.freebsd.org To: x11@freebsd.org Subject: FreeBSD ports you maintain which are out of date X-Mailer: portscout/0.8.1 X-BeenThere: freebsd-x11@freebsd.org X-Mailman-Version: 2.1.14 Precedence: list List-Id: X11 on FreeBSD -- maintaining and support List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 19 May 2013 13:20:37 -0000 Dear port maintainer, The portscout new distfile checker has detected that one or more of your ports appears to be out of date. Please take the opportunity to check each of the ports listed below, and if possible and appropriate, submit/commit an update. If any ports have already been updated, you can safely ignore the entry. You will not be e-mailed again for any of the port/version combinations below. Full details can be found at the following URL: http://portscout.freebsd.org/x11@freebsd.org.html Port | Current version | New version ------------------------------------------------+-----------------+------------ x11/xrefresh | 1.0.4 | 1.0.5 ------------------------------------------------+-----------------+------------ If any of the above results are invalid, please check the following page for details on how to improve portscout's detection and selection of distfiles on a per-port basis: http://portscout.freebsd.org/info/portscout-portconfig.txt If wish to stop receiving portscout reminders, please contact portscout@portscout.freebsd.org Thanks. From owner-freebsd-x11@FreeBSD.ORG Mon May 20 11:06:58 2013 Return-Path: Delivered-To: freebsd-x11@FreeBSD.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by hub.freebsd.org (Postfix) with ESMTP id 49EB6709 for ; Mon, 20 May 2013 11:06:57 +0000 (UTC) (envelope-from owner-bugmaster@FreeBSD.org) Received: from freefall.freebsd.org (freefall.freebsd.org [IPv6:2001:1900:2254:206c::16:87]) by mx1.freebsd.org (Postfix) with ESMTP id 80B5BDCD for ; Mon, 20 May 2013 11:06:57 +0000 (UTC) Received: from freefall.freebsd.org (localhost [127.0.0.1]) by freefall.freebsd.org (8.14.7/8.14.7) with ESMTP id r4KB6vGi083121 for ; Mon, 20 May 2013 11:06:57 GMT (envelope-from owner-bugmaster@FreeBSD.org) Received: (from gnats@localhost) by freefall.freebsd.org (8.14.7/8.14.7/Submit) id r4KB6va7083119 for freebsd-x11@FreeBSD.org; Mon, 20 May 2013 11:06:57 GMT (envelope-from owner-bugmaster@FreeBSD.org) Date: Mon, 20 May 2013 11:06:57 GMT Message-Id: <201305201106.r4KB6va7083119@freefall.freebsd.org> X-Authentication-Warning: freefall.freebsd.org: gnats set sender to owner-bugmaster@FreeBSD.org using -f From: FreeBSD bugmaster To: freebsd-x11@FreeBSD.org Subject: Current problem reports assigned to freebsd-x11@FreeBSD.org X-BeenThere: freebsd-x11@freebsd.org X-Mailman-Version: 2.1.14 Precedence: list List-Id: X11 on FreeBSD -- maintaining and support List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 20 May 2013 11:06:58 -0000 Note: to view an individual PR, use: http://www.freebsd.org/cgi/query-pr.cgi?pr=(number). The following is a listing of current problems submitted by FreeBSD users. These represent problem reports covering all versions including experimental development code and obsolete releases. S Tracker Resp. Description -------------------------------------------------------------------------------- o ports/178670 x11 x11/xorg: X does not refresh upper 1/4 screen in some o ports/178660 x11 x11-servers/xorg: US Programmer Dvorak keyboard layout o ports/178648 x11 Update x11-drivers/xf86-video-ati to the 6.14.6 [patch o ports/178170 x11 [patch] x11-servers/xorg-server: xkb misbehaviour on k o ports/177843 x11 port x11/xcb-proto port broken on arm o ports/177691 x11 [PATCH] x11-drivers/xf86-video-openchrome: update to 0 o ports/177539 x11 x11-drivers/xf86-video-via make fails o ports/177068 x11 I have updated x11-drivers/xf86-input-vmmouse to 13.0. o ports/177051 x11 graphics/dri compilation searching for headers that se o ports/176705 x11 graphics/libGL : Fix complitation (not useability) on o ports/176703 x11 graphics/dri : Fix complitation (not useability) on AR o ports/176111 x11 [PATCH] x11-servers/xorg-server v.1.10.6_2,1 o ports/175935 x11 x11-clocks/xclock links to iconv o ports/175876 x11 [new port] x11-drivers/xf86-input-wacom: split from in o ports/175819 x11 I have updated x11-drivers/xf86-video-vmware to 13.0.0 o ports/175629 x11 x11-drivers/xf86-video-openchrome too old o ports/175532 x11 x11/xdm: /bin/cp -n /usr/local/share/examples/xdm/Give o ports/175432 x11 [PATCH] x11-fonts/xorg-fonts-truetype: Depend on x11-f o ports/175378 x11 x11/xorg: X won't accept keyboard or mouse input if .x o ports/175299 x11 graphics/dri fails to build with clang o ports/174524 x11 [PATCH] devel/gccmakedep o ports/174446 x11 [patch] fix hang on startup in x11-drivers/xf86-video- o ports/173492 x11 x11/xorg: X --configure dies when using 2 video cards o ports/173304 x11 x11/libxcb breaks other applications runtine/build o ports/172745 x11 x11/sessreg does not compile in 9.1-PRERELEASE #23 o ports/172379 x11 x11/Xorg errors: drmOpenDevice, /dev/dri/, /dev/dri/ca o ports/172102 x11 [PATCH] devel/gccmakedep build error with clang-cpp o ports/172101 x11 [PATCH] devel/imake build error with clang-cpp o ports/171422 x11 graphics/libGL build error with python3.2 o ports/171242 x11 x11-drivers/xf86-input-mouse: fail to detect moused(8) o ports/170852 x11 [PATCH] x11-fonts/encodings: encodings.dir includes bo o ports/170690 x11 x11-servers/xorg-server eats memory o ports/170232 x11 x11-drivers/xf86-video-intel package building error wi o ports/170108 x11 x11-fonts/libfontenc: library in the package searches o ports/169794 x11 x11/xdm, several /usr/local/lib/X11/xdm/ files missing o ports/169561 x11 [patch] x11-toolkits/libXmu: disable specs o ports/169560 x11 [patch] x11/libICE: disable specs o ports/169559 x11 [patch] x11-fonts/fontsproto: disable specs o ports/168901 x11 New port: textproc/xorg-sgml-doctools o ports/168645 x11 [UPDATE] x11/luit to 1.1.1 f ports/167797 x11 x11/xorg: graphics/gthumb crashes, dumps core f ports/167654 x11 x11-wm/twm - no mouse cursor o ports/167596 x11 [patch] I have rolled back x11-drivers/xf86-video-vmwa o ports/167228 x11 x11-drivers/xf86-video-intel : Missing dependency (x1 o ports/167194 x11 x11-drivers/xf86-input-synaptics 1.5.0 trackpoint(LENO o ports/166163 x11 graphics/dri: gthumb port crashes (SIGSEGV) within the o ports/165981 x11 devel/imake doesn't play nice with current xorg o ports/165599 x11 x11/xkeyboard-config: x11/xkbcomp as a RUN_DEPENDS f power/165585 x11 x11-servers/xorg-server: Both Xorg and Xorg-server por p ports/164349 x11 [PATCH] x11/libXinerama :1 LeftOf or Above :0 mouse is o ports/161480 x11 [patch] x11/luit: don't depend on pty(4), use openpty( o ports/160968 x11 [patch] ports/x11/libXi broken manpages o ports/160963 x11 [patch] x11/bigreqsproto: disable specs o ports/159792 x11 [patch] USB HID devices support for x11-drivers/xf86-i o ports/158529 x11 [patch] x11-servers/xorg-server: conditionalize --with o ports/158513 x11 Broken Xvideo in x11-drivers/xf86-video-intel drivers o ports/156949 x11 x11-drivers/xf86-video-ati 6.14.1 produce black blank f ports/156424 x11 8.2R xrandr & xf86-video-intel & xorg-server packages o ports/156405 x11 x11-drivers/xf86-video-ati driver: no hardware renderi o ports/156042 x11 x11/xorg hang in combination with KWin-Tiling o ports/155696 x11 [patch] x11-servers/xorg-server: chase AIGLX altered d o ports/155683 x11 x11/xdm [patch] Enabling IPv6 support breaks IPv4 f ports/154510 x11 [patch] x11/xorg: xorg servers have Motif-crippling bu o ports/154502 x11 x11/xdm authorization failure when used with E17 windo o ports/154423 x11 x11-drivers/xf86-video-radeonhd: radeon xorg driver ca o ports/153593 x11 graphics/dri: clutter segfault, something to do with i o ports/153495 x11 x11-drivers/xf86-video-ati wavy line problem for lenov o ports/153358 x11 x11-drivers/xf86-video-intel: Intel driver freeze with o ports/152159 x11 [hang] xorg/x11: X11 freezes with Intel Mobile 965 and o ports/151596 x11 x11/xorg: wacom bamboo button 1 no longer works o ports/150633 x11 x11-servers/xorg-server: KVM switching causing X serve o ports/150155 x11 x11/xorg hangs after xrandr(1) usage o ports/149743 x11 x11/xorg: garbled window since Xorg-7.5 o ports/149636 x11 x11/xorg: buffer overflow in pci_device_freebsd_read_r o ports/148591 x11 information note for x11-drivers/xf86-input-synaptics o ports/148444 x11 [hang] x11-drivers/xf86-video-intel: intel driver free f ports/148340 x11 x11-drivers/xf86-video-neomagic: unresolved symbol xf8 o ports/145649 x11 x11/xorg: X server crashes when starting opengl compos o ports/142069 x11 x11/xorg: After adding on a laptop Toshiba Sattelite L o ports/141660 x11 x11/xorg: X can't determine amount of video memory on o ports/139011 x11 [patch] Add options to support GLX TLS in x11-servers o ports/135276 x11 x11/xorg: GUI running first time only while using Free o ports/134132 x11 x11-servers/xorg-server: Intel i845 - xorg.conf with U o ports/131726 x11 x11-servers/xorg-server: xorg server messes with my eh o ports/122830 x11 x11/xorg: Error in I830WaitLpRing() o ports/120947 x11 x11/xsm ignores system.xsm and .xsmstartup 86 problems total. From owner-freebsd-x11@FreeBSD.ORG Tue May 21 15:45:16 2013 Return-Path: Delivered-To: freebsd-x11@freebsd.org Received: from mx1.freebsd.org (mx1.FreeBSD.org [8.8.178.115]) by hub.freebsd.org (Postfix) with ESMTP id 8194C80C for ; Tue, 21 May 2013 15:45:16 +0000 (UTC) (envelope-from zaphod@berentweb.com) Received: from sam.nabble.com (sam.nabble.com [216.139.236.26]) by mx1.freebsd.org (Postfix) with ESMTP id 6A447A6F for ; Tue, 21 May 2013 15:45:16 +0000 (UTC) Received: from [192.168.236.26] (helo=sam.nabble.com) by sam.nabble.com with esmtp (Exim 4.72) (envelope-from ) id 1UeokU-00075P-KK for freebsd-x11@freebsd.org; Tue, 21 May 2013 08:45:15 -0700 Date: Tue, 21 May 2013 08:45:14 -0700 (PDT) From: Beeblebrox To: freebsd-x11@freebsd.org Message-ID: <1369151114619-5813727.post@n5.nabble.com> Subject: x11/slim does not pickup correct xkb keymap from xorg.conf MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit X-BeenThere: freebsd-x11@freebsd.org X-Mailman-Version: 2.1.14 Precedence: list List-Id: X11 on FreeBSD -- maintaining and support List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 21 May 2013 15:45:16 -0000 my /etc/X11/xorg.conf has: Section "InputDevice" Identifier "Keyboard0" Driver "kbd" Option "XkbModel" "pc105" Option "XkbLayout" "fr" ## MatchIsKeyboard "on" EndSection # service onestart slim xorg starts, keymap is wrong, the log shows as below and I have to manually run "setxkbmap fr" II) Module kbd: vendor="X.Org Foundation" compiled for 1.7.7, module version = 1.7.0 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 7.0 (**) AT Keyboard: always reports core events (**) Option "Protocol" "standard" (**) Option "XkbRules" "base" (**) Option "XkbModel" "pc105" (**) Option "XkbLayout" "us" ----- 10-Current-amd64-using ccache-portstree merged with marcuscom.gnome3 & xorg.devel -- View this message in context: http://freebsd.1045724.n5.nabble.com/x11-slim-does-not-pickup-correct-xkb-keymap-from-xorg-conf-tp5813727.html Sent from the freebsd-x11 mailing list archive at Nabble.com. From owner-freebsd-x11@FreeBSD.ORG Tue May 21 16:14:00 2013 Return-Path: Delivered-To: freebsd-x11@freebsd.org Received: from mx1.freebsd.org (mx1.FreeBSD.org [8.8.178.115]) by hub.freebsd.org (Postfix) with ESMTP id 0E5CAEA5 for ; Tue, 21 May 2013 16:14:00 +0000 (UTC) (envelope-from zeising@freebsd.org) Received: from mail.lysator.liu.se (mail.lysator.liu.se [IPv6:2001:6b0:17:f0a0::3]) by mx1.freebsd.org (Postfix) with ESMTP id AEAC6B8D for ; Tue, 21 May 2013 16:13:59 +0000 (UTC) Received: from mail.lysator.liu.se (localhost [127.0.0.1]) by mail.lysator.liu.se (Postfix) with ESMTP id E8A8F40010 for ; Tue, 21 May 2013 18:13:57 +0200 (CEST) Received: by mail.lysator.liu.se (Postfix, from userid 1004) id DE8024000F; Tue, 21 May 2013 18:13:57 +0200 (CEST) X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on bernadotte.lysator.liu.se X-Spam-Level: X-Spam-Status: No, score=0.0 required=5.0 tests=AWL autolearn=disabled version=3.3.1 X-Spam-Score: 0.0 Received: from mx.daemonic.se (mx.daemonic.se [IPv6:2001:470:dca9:0:1::3]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (No client certificate requested) by mail.lysator.liu.se (Postfix) with ESMTPSA id A00764000A; Tue, 21 May 2013 18:13:56 +0200 (CEST) Received: from mailscanner.daemonic.se (mailscanner.daemonic.se [IPv6:2001:470:dca9:0:1::6]) by mx.daemonic.se (Postfix) with ESMTPS id 3bFMVD14k6z8hVn; Tue, 21 May 2013 18:13:56 +0200 (CEST) X-Virus-Scanned: amavisd-new at daemonic.se Received: from mx.daemonic.se ([IPv6:2001:470:dca9:0:1::3]) (using TLS with cipher CAMELLIA256-SHA) by mailscanner.daemonic.se (mailscanner.daemonic.se [IPv6:2001:470:dca9:0:1::6]) (amavisd-new, port 10025) with ESMTPS id Mse1e8FNK-Zz; Tue, 21 May 2013 18:13:53 +0200 (CEST) Received: from mail.daemonic.se (mail.daemonic.se [10.1.0.4]) by mx.daemonic.se (Postfix) with ESMTPS id 3bFMV91mVyz8hVm; Tue, 21 May 2013 18:13:53 +0200 (CEST) Received: from [IPv6:::1] (celes.daemonic.se [IPv6:2001:470:dca9:1::3]) by mail.daemonic.se (Postfix) with ESMTPSA id 3bFMV90b1bz9Ctq; Tue, 21 May 2013 18:13:53 +0200 (CEST) Message-ID: <519B9D3A.5090005@freebsd.org> Date: Tue, 21 May 2013 18:13:46 +0200 From: Niclas Zeising User-Agent: Mutt/1.5.21 MIME-Version: 1.0 To: Beeblebrox Subject: Re: x11/slim does not pickup correct xkb keymap from xorg.conf References: <1369151114619-5813727.post@n5.nabble.com> In-Reply-To: <1369151114619-5813727.post@n5.nabble.com> Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit X-Antivirus: avast! (VPS 130521-0, 2013-05-21), Outbound message X-Antivirus-Status: Clean X-Virus-Scanned: ClamAV using ClamSMTP Cc: freebsd-x11@freebsd.org X-BeenThere: freebsd-x11@freebsd.org X-Mailman-Version: 2.1.14 Precedence: list List-Id: X11 on FreeBSD -- maintaining and support List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 21 May 2013 16:14:00 -0000 On 2013-05-21 17:45, Beeblebrox wrote: > my /etc/X11/xorg.conf has: > Section "InputDevice" > Identifier "Keyboard0" > Driver "kbd" > Option "XkbModel" "pc105" > Option "XkbLayout" "fr" > ## MatchIsKeyboard "on" > EndSection > > # service onestart slim > xorg starts, keymap is wrong, the log shows as below and I have to manually > run "setxkbmap fr" > II) Module kbd: vendor="X.Org Foundation" > compiled for 1.7.7, module version = 1.7.0 > Module class: X.Org XInput Driver > ABI class: X.Org XInput driver, version 7.0 > (**) AT Keyboard: always reports core events > (**) Option "Protocol" "standard" > (**) Option "XkbRules" "base" > (**) Option "XkbModel" "pc105" > (**) Option "XkbLayout" "us" > Some guesses around here. Slim is a session manager if I'm not mistaken? That means it has to handle multiple sessions, perhaps with different keyboard layouts. If this scenario is correct, then it might make sense for slim to ignore or reset keyboard settings, and then have the DE/WM decide for each session, since different users (sessions) want different defaults. Just a thought. You might want to check around in the config for slim, or ask on google, to see if anything else comes up. Regards! -- Niclas From owner-freebsd-x11@FreeBSD.ORG Tue May 21 16:24:33 2013 Return-Path: Delivered-To: freebsd-x11@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by hub.freebsd.org (Postfix) with ESMTP id 988FA2E6 for ; Tue, 21 May 2013 16:24:33 +0000 (UTC) (envelope-from zaphod@berentweb.com) Received: from sam.nabble.com (sam.nabble.com [216.139.236.26]) by mx1.freebsd.org (Postfix) with ESMTP id 7F954CD0 for ; Tue, 21 May 2013 16:24:33 +0000 (UTC) Received: from [192.168.236.26] (helo=sam.nabble.com) by sam.nabble.com with esmtp (Exim 4.72) (envelope-from ) id 1UepMW-0006PS-Ul for freebsd-x11@freebsd.org; Tue, 21 May 2013 09:24:32 -0700 Date: Tue, 21 May 2013 09:24:32 -0700 (PDT) From: Beeblebrox To: freebsd-x11@freebsd.org Message-ID: <1369153472944-5813737.post@n5.nabble.com> In-Reply-To: <519B9D3A.5090005@freebsd.org> References: <1369151114619-5813727.post@n5.nabble.com> <519B9D3A.5090005@freebsd.org> Subject: x11/slim does not pickup correct xkb keymap from xorg.conf MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit X-BeenThere: freebsd-x11@freebsd.org X-Mailman-Version: 2.1.14 Precedence: list List-Id: X11 on FreeBSD -- maintaining and support List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 21 May 2013 16:24:33 -0000 Pretty sure you are correct in your analysis. I forgot to mention in 1st post that: * The slim login screen also has wrong keymap - so the problem starts at the login screen. * google shows many posts suggesting the use in xorg.conf of: MatchIsKeyboard "on" This however is not recognised by xorg and breaks the startup. * /usr/local/etc/slim.conf has nothing to say about this (at least from what I read). Regards. ----- 10-Current-amd64-using ccache-portstree merged with marcuscom.gnome3 & xorg.devel -- View this message in context: http://freebsd.1045724.n5.nabble.com/x11-slim-does-not-pickup-correct-xkb-keymap-from-xorg-conf-tp5813727p5813737.html Sent from the freebsd-x11 mailing list archive at Nabble.com. From owner-freebsd-x11@FreeBSD.ORG Tue May 21 16:50:43 2013 Return-Path: Delivered-To: freebsd-x11@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by hub.freebsd.org (Postfix) with ESMTP id E60DDFA1 for ; Tue, 21 May 2013 16:50:43 +0000 (UTC) (envelope-from zeising@freebsd.org) Received: from mail.lysator.liu.se (mail.lysator.liu.se [IPv6:2001:6b0:17:f0a0::3]) by mx1.freebsd.org (Postfix) with ESMTP id 94001E4F for ; Tue, 21 May 2013 16:50:43 +0000 (UTC) Received: from mail.lysator.liu.se (localhost [127.0.0.1]) by mail.lysator.liu.se (Postfix) with ESMTP id BA7824000A for ; Tue, 21 May 2013 18:50:42 +0200 (CEST) Received: by mail.lysator.liu.se (Postfix, from userid 1004) id B09F640010; Tue, 21 May 2013 18:50:42 +0200 (CEST) X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on bernadotte.lysator.liu.se X-Spam-Level: X-Spam-Status: No, score=0.0 required=5.0 tests=AWL autolearn=disabled version=3.3.1 X-Spam-Score: 0.0 Received: from mx.daemonic.se (h-45-105.a163.priv.bahnhof.se [94.254.45.105]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (No client certificate requested) by mail.lysator.liu.se (Postfix) with ESMTPSA id 815064000A; Tue, 21 May 2013 18:50:41 +0200 (CEST) Received: from mailscanner.daemonic.se (mailscanner.daemonic.se [IPv6:2001:470:dca9:0:1::6]) by mx.daemonic.se (Postfix) with ESMTPS id 3bFNJd29dFz8hVn; Tue, 21 May 2013 18:50:41 +0200 (CEST) X-Virus-Scanned: amavisd-new at daemonic.se Received: from mx.daemonic.se ([IPv6:2001:470:dca9:0:1::3]) (using TLS with cipher CAMELLIA256-SHA) by mailscanner.daemonic.se (mailscanner.daemonic.se [IPv6:2001:470:dca9:0:1::6]) (amavisd-new, port 10025) with ESMTPS id x-rLpruGXpEZ; Tue, 21 May 2013 18:50:38 +0200 (CEST) Received: from mail.daemonic.se (mail.daemonic.se [IPv6:2001:470:dca9:0:1::4]) by mx.daemonic.se (Postfix) with ESMTPS id 3bFNJZ5SXMz8hVm; Tue, 21 May 2013 18:50:38 +0200 (CEST) Received: from tifa.daemonic.se (tifa.daemonic.se [IPv6:2001:470:dca9:1::6]) by mail.daemonic.se (Postfix) with ESMTPSA id 3bFNJZ4qxFz9Ctq; Tue, 21 May 2013 18:50:38 +0200 (CEST) Received: from tifa.daemonic.se (localhost [IPv6:::1]) by tifa.daemonic.se (Postfix) with ESMTP id C7D042281C; Tue, 21 May 2013 18:50:36 +0200 (CEST) Message-ID: <519BA5DB.6050406@freebsd.org> Date: Tue, 21 May 2013 18:50:35 +0200 From: Niclas Zeising User-Agent: Mutt/1.5.21 MIME-Version: 1.0 To: Beeblebrox Subject: Re: x11/slim does not pickup correct xkb keymap from xorg.conf References: <1369151114619-5813727.post@n5.nabble.com> <519B9D3A.5090005@freebsd.org> <1369153472944-5813737.post@n5.nabble.com> In-Reply-To: <1369153472944-5813737.post@n5.nabble.com> Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 7bit X-Virus-Scanned: ClamAV using ClamSMTP Cc: freebsd-x11@freebsd.org X-BeenThere: freebsd-x11@freebsd.org X-Mailman-Version: 2.1.14 Precedence: list List-Id: X11 on FreeBSD -- maintaining and support List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 21 May 2013 16:50:44 -0000 On 05/21/13 18:24, Beeblebrox wrote: > Pretty sure you are correct in your analysis. I forgot to mention in 1st post > that: > * The slim login screen also has wrong keymap - so the problem starts at the > login screen. > * google shows many posts suggesting the use in xorg.conf of: > MatchIsKeyboard "on" > This however is not recognised by xorg and breaks the startup. > * /usr/local/etc/slim.conf has nothing to say about this (at least from what > I read). > You can always make a script that runs the proper setxkbmap commands in connection with starting your de/wm... That might not be the cleanest of solutions, but it works. Otherwise I would suggest talking to the devs of slim and see what they think. I have no idea how this is handled in xdm, kdm or gdm. Regards! -- Niclas Zeising From owner-freebsd-x11@FreeBSD.ORG Tue May 21 19:50:53 2013 Return-Path: Delivered-To: freebsd-x11@freebsd.org Received: from mx1.freebsd.org (mx1.FreeBSD.org [8.8.178.115]) by hub.freebsd.org (Postfix) with ESMTP id E87F621E; Tue, 21 May 2013 19:50:53 +0000 (UTC) (envelope-from artyom.mirgorodsky@gmail.com) Received: from mail-ee0-f51.google.com (mail-ee0-f51.google.com [74.125.83.51]) by mx1.freebsd.org (Postfix) with ESMTP id 15BDD9AF; Tue, 21 May 2013 19:50:52 +0000 (UTC) Received: by mail-ee0-f51.google.com with SMTP id e51so656784eek.10 for ; Tue, 21 May 2013 12:50:46 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20120113; h=from:to:subject:date:message-id:user-agent:mime-version :content-type:content-transfer-encoding; bh=Pjev2/vpOmI8KsLTkbmvPDbwCinjH6xc3sUMQPDdr7A=; b=Lft6kj39hZH0wI5uWGO+ar63wMjMhNVkqMrH4oUGrzHFMBjpRNMePc2YFu7PjBDe4x 4n9eNQbtBXmOucYYJBYHz4EvBlcXcj9Kl75SZE3LHBzH1k+NwcyRyWcFEjiPJY2Q5u74 nVQh+lcbdTTARoBfBepxc/M6YqaRbkhSrErDCu6P1bdcugPdKxBriYW55L8lKu5KKmhd t1+LJqYOAXZ6dQEpmIFkUxsfeYQeculKLlZqCLVoWE2hbPhyhYdef3/SbKeyVF3kXGyw NeB/Nrt708Q/2V4pq48iYilyLZ9lZ8rcv3RF+AxUj80kgfbZA4UuUOEpdBRzNgay3re6 jERw== X-Received: by 10.14.3.137 with SMTP id 9mr10410254eeh.0.1369165846160; Tue, 21 May 2013 12:50:46 -0700 (PDT) Received: from notebook.alkar.net (nat1.id-telecom.net. [178.215.171.16]) by mx.google.com with ESMTPSA id s43sm5462566eem.13.2013.05.21.12.50.44 for (version=TLSv1 cipher=ECDHE-RSA-RC4-SHA bits=128/128); Tue, 21 May 2013 12:50:45 -0700 (PDT) From: Artyom Mirgorodskiy To: freebsd-current@freebsd.org, freebsd-x11@freebsd.org Subject: FreeBSD-head hang when shutdown by ACPI with Intel GPU and new Xorg and SandyBridge Date: Tue, 21 May 2013 22:50:44 +0300 Message-ID: <1601171.hWXcdG7J9D@notebook.alkar.net> User-Agent: KMail/4.10.2 (FreeBSD/10.0-CURRENT; KDE/4.10.2; amd64; ; ) MIME-Version: 1.0 Content-Type: multipart/mixed; boundary="nextPart1597443.HtXXEyHsWF" Content-Transfer-Encoding: 7Bit X-Content-Filtered-By: Mailman/MimeDel 2.1.14 X-BeenThere: freebsd-x11@freebsd.org X-Mailman-Version: 2.1.14 Precedence: list List-Id: X11 on FreeBSD -- maintaining and support List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 21 May 2013 19:50:54 -0000 This is a multi-part message in MIME format. --nextPart1597443.HtXXEyHsWF Content-Transfer-Encoding: 7Bit Content-Type: text/plain; charset="us-ascii" Hi More than a month I can not shutdown FreeBSD on my laptop correctly when running Xorg with Intel GPU. However reboot work correctly. Shutdown work fine if I choose Vesa driver in xorg.conf. So I can run with intel, then edit xorg.conf, kill Xorg server and shutdown correctly. If I shut down immediately after loading Xorg - everything is fine too. Without the text console is difficult to provide any information :( Why would still not recover mode when kill Xorg? PS I try to disable RC6 states -without any changes. FreeBSD shutdown correctly before January. -- Artyom Mirgorodskiy --nextPart1597443.HtXXEyHsWF Content-Disposition: attachment; filename="dmesg" Content-Transfer-Encoding: 7Bit Content-Type: text/plain; charset="UTF-8"; name="dmesg" Waiting (max 60 seconds) for system process `vnlru' to stop...done Waiting (max 60 seconds) for system process `bufdaemon' to stop...done Waiting (max 60 seconds) for system process `syncer' to stop... Syncing disks, vnodes remaining...0 0 done All buffers synced. Table 'FACP' at 0xcafef000 Table 'SSDT' at 0xcaffd000 Table 'SSDT' at 0xcaffc000 Table 'SSDT' at 0xcaffb000 Table 'ASF!' at 0xcaff1000 Table 'HPET' at 0xcafee000 Table 'APIC' at 0xcafed000 APIC: Found table at 0xcafed000 APIC: Using the MADT enumerator. MADT: Found CPU APIC ID 0 ACPI ID 1: enabled SMP: Added CPU 0 (AP) MADT: Found CPU APIC ID 1 ACPI ID 2: enabled SMP: Added CPU 1 (AP) MADT: Found CPU APIC ID 2 ACPI ID 3: enabled SMP: Added CPU 2 (AP) MADT: Found CPU APIC ID 3 ACPI ID 4: enabled SMP: Added CPU 3 (AP) MADT: Found CPU APIC ID 0 ACPI ID 5: disabled MADT: Found CPU APIC ID 0 ACPI ID 6: disabled MADT: Found CPU APIC ID 0 ACPI ID 7: disabled MADT: Found CPU APIC ID 0 ACPI ID 8: disabled Copyright (c) 1992-2013 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 10.0-CURRENT #14 r250824M: Mon May 20 10:41:57 EEST 2013 MAN@notebook.alkar.net:/usr/obj/usr/src/sys/Work amd64 FreeBSD clang version 3.3 (trunk 178860) 20130405 Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff80cef000. Preloaded elf obj module "/boot/kernel/msdosfs.ko" at 0xffffffff80cefb10. Preloaded elf obj module "/boot/kernel/snd_hda.ko" at 0xffffffff80cf00b8. Preloaded elf obj module "/boot/kernel/uhid.ko" at 0xffffffff80cf0660. Preloaded elf obj module "/boot/kernel/usb.ko" at 0xffffffff80cf0bc8. Preloaded elf obj module "/boot/kernel/uhci.ko" at 0xffffffff80cf1230. Preloaded elf obj module "/boot/kernel/ehci.ko" at 0xffffffff80cf1758. Preloaded elf obj module "/boot/kernel/msdosfs_iconv.ko" at 0xffffffff80cf1c80. Preloaded elf obj module "/boot/kernel/libiconv.ko" at 0xffffffff80cf2130. Preloaded elf obj module "/boot/modules/cuse4bsd.ko" at 0xffffffff80cf2760. Preloaded elf obj module "/boot/kernel/ichsmb.ko" at 0xffffffff80cf2d10. Preloaded elf obj module "/boot/kernel/smbus.ko" at 0xffffffff80cf3238. Calibrating TSC clock ... TSC clock: 2195062824 Hz CPU: Intel(R) Core(TM) i3-2330M CPU @ 2.20GHz (2195.06-MHz K8-class CPU) Origin = "GenuineIntel" Id = 0x206a7 Family = 0x6 Model = 0x2a Stepping = 7 Features=0xbfebfbff Features2=0x1dbae3bf AMD Features=0x28100800 AMD Features2=0x1 TSC: P-state invariant, performance statistics real memory = 4294967296 (4096 MB) Physical memory chunk(s): 0x0000000000010000 - 0x0000000000099fff, 565248 bytes (138 pages) 0x0000000000100000 - 0x00000000001fffff, 1048576 bytes (256 pages) 0x0000000000d13000 - 0x00000000bfa37fff, 3201454080 bytes (781605 pages) 0x0000000100000000 - 0x000000012fde7fff, 803110912 bytes (196072 pages) avail memory = 3829940224 (3652 MB) ACPI APIC Table: INTR: Adding local APIC 1 as a target INTR: Adding local APIC 2 as a target INTR: Adding local APIC 3 as a target FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 SMT threads cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 cpu2 (AP): APIC ID: 2 cpu3 (AP): APIC ID: 3 x86bios: IVT 0x000000-0x0004ff at 0xfffffe0000000000 x86bios: SSEG 0x098000-0x098fff at 0xffffff8000244000 x86bios: EBDA 0x09d000-0x09ffff at 0xfffffe000009d000 x86bios: ROM 0x0a0000-0x0fefff at 0xfffffe00000a0000 lapic0: CMCI unmasked APIC: CPU 0 has ACPI ID 1 APIC: CPU 1 has ACPI ID 2 APIC: CPU 2 has ACPI ID 3 APIC: CPU 3 has ACPI ID 4 ULE: setup cpu 0 ULE: setup cpu 1 ULE: setup cpu 2 ULE: setup cpu 3 ACPI: RSDP 0xf00e0 00024 (v02 FUJ ) ACPI: XSDT 0xcaffe120 0008C (v01 FUJ PC 01120000 FUJ 00000001) ACPI: FACP 0xcafef000 000F4 (v03 FUJ PC 01120000 FUJ 00000001) ACPI: DSDT 0xcaff2000 08E91 (v02 FUJ FJNB223 01120000 INTL 20061109) ACPI: FACS 0xcaf42000 00040 ACPI: SSDT 0xcaffd000 00346 (v01 FUJ SataAhci 00000001 INTL 20061109) ACPI: SSDT 0xcaffc000 002C1 (v01 FUJ BayAhci2 00000001 INTL 20061109) ACPI: SSDT 0xcaffb000 000B6 (v02 FUJ DockSsdt 00000001 INTL 20061109) ACPI: ASF! 0xcaff1000 000A5 (v32 FUJ PC 00000001 PTL 00000001) ACPI: HPET 0xcafee000 00038 (v01 FUJ PC 00000001 PTL 00000001) ACPI: APIC 0xcafed000 00098 (v01 FUJ PC 00000001 PTL 00000001) ACPI: MCFG 0xcafec000 0003C (v01 FUJ PC 00000001 PTL 00000001) ACPI: SSDT 0xcafeb000 0090C (v01 PmRef Cpu0Ist 00003000 INTL 20061109) ACPI: SSDT 0xcafea000 009F5 (v01 PmRef CpuPm 00003000 INTL 20061109) ACPI: UEFI 0xcafe9000 0003E (v01 FUJ PC 00000001 PTL 00000001) ACPI: UEFI 0xcafe8000 00042 (v01 PTL COMBUF 00000001 PTL 00000001) ACPI: UEFI 0xcafe7000 00256 (v01 FUJ PC 00000001 PTL 00000001) MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000 ioapic0: Routing external 8259A's -> intpin 0 MADT: Interrupt override: source 0, irq 2 ioapic0: Routing IRQ 0 -> intpin 2 MADT: Interrupt override: source 9, irq 9 ioapic0: intpin 9 trigger: level MADT: Ignoring local NMI routed to ACPI CPU 0 lapic0: Routing NMI -> LINT1 lapic0: LINT1 trigger: edge lapic0: LINT1 polarity: high ioapic0 irqs 0-23 on motherboard cpu0 BSP: ID: 0x00000000 VER: 0x01060015 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 cmci: 0x000000f2 Cuse4BSD v0.1.27 @ /dev/cuse wlan: <802.11 Link Layer> snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024] feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=5 feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25 kbd: new array size 4 kbd1 at kbdmux0 mem: null: io: random: ctl: CAM Target Layer loaded acpi0: on motherboard ACPI: All ACPI Tables successfully acquired PCIe: Memory Mapped configuration base @ 0xf8000000 ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48 ACPI: SSDT 0xcae99618 005B9 (v02 FUJ VistSsdt 00000001 INTL 20061109) ACPI: Dynamic OEM Table Load: ACPI: SSDT 0 005B9 (v02 FUJ VistSsdt 00000001 INTL 20061109) acpi0: Power Button (fixed) hpet0: iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0 hpet0: vendor 0x8086, rev 0x1, 14318180Hz 64bit, 8 timers, legacy route hpet0: t0: irqs 0x00f00000 (0), MSI, 64bit, periodic hpet0: t1: irqs 0x00f00000 (0), MSI hpet0: t2: irqs 0x00f00800 (0), MSI hpet0: t3: irqs 0x00f01000 (0), MSI hpet0: t4: irqs 0x00000000 (0), MSI hpet0: t5: irqs 0x00000000 (0), MSI hpet0: t6: irqs 0x00000000 (0), MSI hpet0: t7: irqs 0x00000000 (0), MSI Timecounter "HPET" frequency 14318180 Hz quality 950 msi: routing MSI-X IRQ 256 to local APIC 0 vector 49 msi: routing MSI-X IRQ 257 to local APIC 0 vector 50 msi: routing MSI-X IRQ 258 to local APIC 0 vector 51 msi: routing MSI-X IRQ 259 to local APIC 0 vector 52 msi: routing MSI-X IRQ 260 to local APIC 0 vector 53 msi: routing MSI-X IRQ 261 to local APIC 0 vector 54 msi: routing MSI-X IRQ 262 to local APIC 0 vector 55 msi: routing MSI-X IRQ 263 to local APIC 0 vector 56 Event timer "HPET" frequency 14318180 Hz quality 550 Event timer "HPET1" frequency 14318180 Hz quality 440 Event timer "HPET2" frequency 14318180 Hz quality 440 Event timer "HPET3" frequency 14318180 Hz quality 440 Event timer "HPET4" frequency 14318180 Hz quality 440 cpu0: Processor \134_PR_.CPU0 (ACPI ID 1) -> APIC ID 0 cpu0: on acpi0 ACPI: SSDT 0xcadc0818 007A9 (v01 PmRef Cpu0Cst 00003001 INTL 20061109) ACPI: Dynamic OEM Table Load: ACPI: SSDT 0 007A9 (v01 PmRef Cpu0Cst 00003001 INTL 20061109) cpu1: Processor \134_PR_.CPU1 (ACPI ID 2) -> APIC ID 1 cpu1: on acpi0 ACPI: SSDT 0xcadc1a98 00303 (v01 PmRef ApIst 00003000 INTL 20061109) ACPI: Dynamic OEM Table Load: ACPI: SSDT 0 00303 (v01 PmRef ApIst 00003000 INTL 20061109) ACPI: SSDT 0xcae9dc18 00119 (v01 PmRef ApCst 00003000 INTL 20061109) ACPI: Dynamic OEM Table Load: ACPI: SSDT 0 00119 (v01 PmRef ApCst 00003000 INTL 20061109) cpu2: Processor \134_PR_.CPU2 (ACPI ID 3) -> APIC ID 2 cpu2: on acpi0 cpu3: Processor \134_PR_.CPU3 (ACPI ID 4) -> APIC ID 3 cpu3: on acpi0 ACPI: Processor \134_PR_.CPU4 (ACPI ID 5) ignored ACPI: Processor \134_PR_.CPU5 (ACPI ID 6) ignored ACPI: Processor \134_PR_.CPU6 (ACPI ID 7) ignored ACPI: Processor \134_PR_.CPU7 (ACPI ID 8) ignored atrtc0: port 0x70-0x77 on acpi0 atrtc0: registered as a time-of-day clock (resolution 1000000us, adjustment 0.500000000s) attimer0: port 0x40-0x43,0x50-0x53 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 ioapic0: routing intpin 2 (ISA IRQ 0) to lapic 0 vector 57 Event timer "i8254" frequency 1193182 Hz quality 100 ACPI timer: 1/3 1/3 1/3 1/3 1/3 1/3 1/3 1/3 1/3 1/3 -> 10 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 acpi_ec0: port 0x62,0x66 on acpi0 pci_link0: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 1 3 4 5 6 7 10 12 14 15 Validation 0 255 N 0 1 3 4 5 6 7 10 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 10 12 14 15 pci_link1: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 1 3 4 5 6 7 11 12 14 15 Validation 0 255 N 0 1 3 4 5 6 7 11 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 11 12 14 15 pci_link2: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 1 3 4 5 6 7 10 12 14 15 Validation 0 10 N 0 1 3 4 5 6 7 10 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 10 12 14 15 pci_link3: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 1 3 4 5 6 7 11 12 14 15 Validation 0 11 N 0 1 3 4 5 6 7 11 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 11 12 14 15 pci_link4: Index IRQ Rtd Ref IRQs Initial Probe 0 7 N 0 1 3 4 5 6 7 10 12 14 15 Validation 0 7 N 0 1 3 4 5 6 7 10 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 10 12 14 15 pci_link5: Index IRQ Rtd Ref IRQs Initial Probe 0 7 N 0 1 3 4 5 6 7 11 12 14 15 Validation 0 7 N 0 1 3 4 5 6 7 11 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 11 12 14 15 pci_link6: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 1 3 4 5 6 7 10 12 14 15 Validation 0 10 N 0 1 3 4 5 6 7 10 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 10 12 14 15 pci_link7: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 1 3 4 5 6 7 11 12 14 15 Validation 0 11 N 0 1 3 4 5 6 7 11 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 11 12 14 15 pcib0: port 0xcf8-0xcff on acpi0 pcib0: decoding 4 range 0-0xcf7 pcib0: decoding 4 range 0xd00-0xffff pcib0: decoding 3 range 0xa0000-0xbffff pcib0: decoding 3 range 0xcfa00000-0xfeafffff pcib0: decoding 3 range 0xfed40000-0xfed44fff pci0: on pcib0 pci0: domain=0, physical bus=0 found-> vendor=0x8086, dev=0x0104, revid=0x09 domain=0, bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x0116, revid=0x09 domain=0, bus=0, slot=2, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message map[10]: type Memory, range 64, base 0xe0000000, size 22, enabled pcib0: allocated type 3 (0xe0000000-0xe03fffff) for rid 10 of pci0:0:2:0 map[18]: type Prefetchable Memory, range 64, base 0xd0000000, size 28, enabled pcib0: allocated type 3 (0xd0000000-0xdfffffff) for rid 18 of pci0:0:2:0 map[20]: type I/O Port, range 32, base 0x3000, size 6, enabled pcib0: allocated type 4 (0x3000-0x303f) for rid 20 of pci0:0:2:0 pcib0: matched entry for 0.2.INTA pcib0: slot 2 INTA hardwired to IRQ 16 found-> vendor=0x8086, dev=0x1c3a, revid=0x04 domain=0, bus=0, slot=22, func=0 class=07-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 3 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 64, base 0xe2605000, size 4, enabled pcib0: allocated type 3 (0xe2605000-0xe260500f) for rid 10 of pci0:0:22:0 pcib0: matched entry for 0.22.INTA pcib0: slot 22 INTA hardwired to IRQ 22 found-> vendor=0x8086, dev=0x1c2d, revid=0x04 domain=0, bus=0, slot=26, func=0 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xe260a000, size 10, enabled pcib0: allocated type 3 (0xe260a000-0xe260a3ff) for rid 10 of pci0:0:26:0 pcib0: matched entry for 0.26.INTA pcib0: slot 26 INTA hardwired to IRQ 23 found-> vendor=0x8086, dev=0x1c20, revid=0x04 domain=0, bus=0, slot=27, func=0 class=04-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=7 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 64, base 0xe2600000, size 14, enabled pcib0: allocated type 3 (0xe2600000-0xe2603fff) for rid 10 of pci0:0:27:0 pcib0: matched entry for 0.27.INTA pcib0: slot 27 INTA hardwired to IRQ 21 found-> vendor=0x8086, dev=0x1c10, revid=0xb4 domain=0, bus=0, slot=28, func=0 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message pcib0: matched entry for 0.28.INTA pcib0: slot 28 INTA hardwired to IRQ 16 found-> vendor=0x8086, dev=0x1c14, revid=0xb4 domain=0, bus=0, slot=28, func=2 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=10 powerspec 2 supports D0 D3 current D0 MSI supports 1 message pcib0: matched entry for 0.28.INTC pcib0: slot 28 INTC hardwired to IRQ 18 found-> vendor=0x8086, dev=0x1c26, revid=0x04 domain=0, bus=0, slot=29, func=0 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xe2609000, size 10, enabled pcib0: allocated type 3 (0xe2609000-0xe26093ff) for rid 10 of pci0:0:29:0 pcib0: matched entry for 0.29.INTA pcib0: slot 29 INTA hardwired to IRQ 22 found-> vendor=0x8086, dev=0x1c49, revid=0x04 domain=0, bus=0, slot=31, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x1c03, revid=0x04 domain=0, bus=0, slot=31, func=2 class=01-06-01, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=7 powerspec 3 supports D0 D3 current D0 MSI supports 1 message map[10]: type I/O Port, range 32, base 0x3088, size 3, enabled pcib0: allocated type 4 (0x3088-0x308f) for rid 10 of pci0:0:31:2 map[14]: type I/O Port, range 32, base 0x3094, size 2, enabled pcib0: allocated type 4 (0x3094-0x3097) for rid 14 of pci0:0:31:2 map[18]: type I/O Port, range 32, base 0x3080, size 3, enabled pcib0: allocated type 4 (0x3080-0x3087) for rid 18 of pci0:0:31:2 map[1c]: type I/O Port, range 32, base 0x3090, size 2, enabled pcib0: allocated type 4 (0x3090-0x3093) for rid 1c of pci0:0:31:2 map[20]: type I/O Port, range 32, base 0x3060, size 5, enabled pcib0: allocated type 4 (0x3060-0x307f) for rid 20 of pci0:0:31:2 map[24]: type Memory, range 32, base 0xe2608000, size 11, enabled pcib0: allocated type 3 (0xe2608000-0xe26087ff) for rid 24 of pci0:0:31:2 pcib0: matched entry for 0.31.INTB pcib0: slot 31 INTB hardwired to IRQ 20 found-> vendor=0x8086, dev=0x1c22, revid=0x04 domain=0, bus=0, slot=31, func=3 class=0c-05-00, hdrtype=0x00, mfdev=0 cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=11 map[10]: type Memory, range 64, base 0xe2604000, size 8, enabled pcib0: allocated type 3 (0xe2604000-0xe26040ff) for rid 10 of pci0:0:31:3 map[20]: type I/O Port, range 32, base 0xefa0, size 5, enabled pcib0: allocated type 4 (0xefa0-0xefbf) for rid 20 of pci0:0:31:3 pcib0: matched entry for 0.31.INTC pcib0: slot 31 INTC hardwired to IRQ 19 vgapci0: port 0x3000-0x303f mem 0xe0000000-0xe03fffff,0xd0000000-0xdfffffff irq 16 at device 2.0 on pci0 pci0: at device 22.0 (no driver attached) pci0:0:22:0: Transition from D0 to D3 ehci0: mem 0xe260a000-0xe260a3ff irq 23 at device 26.0 on pci0 ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 0 vector 58 usbus0: EHCI version 1.0 usbus0 on ehci0 ehci0: usbpf: Attached hdac0: mem 0xe2600000-0xe2603fff irq 21 at device 27.0 on pci0 hdac0: PCI card vendor: 0x10cf, device: 0x15dc hdac0: HDA Driver Revision: 20120126_0002 hdac0: Config options: on=0x00000000 off=0x00000000 hdac0: attempting to allocate 1 MSI vectors (1 supported) msi: routing MSI IRQ 264 to local APIC 0 vector 59 hdac0: using IRQ 264 for MSI hdac0: Caps: OSS 4, ISS 4, BSS 0, NSDO 1, 64bit, CORB 256, RIRB 256 pcib1: irq 16 at device 28.0 on pci0 pcib0: allocated type 4 (0x2000-0x2fff) for rid 1c of pcib1 pcib0: allocated type 3 (0xe0600000-0xe25fffff) for rid 20 of pcib1 pcib1: domain 0 pcib1: secondary bus 1 pcib1: subordinate bus 9 pcib1: I/O decode 0x2000-0x2fff pcib1: memory decode 0xe0600000-0xe25fffff pcib1: no prefetched decode pci1: on pcib1 pci1: domain=0, physical bus=1 pcib2: irq 18 at device 28.2 on pci0 pcib0: allocated type 3 (0xe0500000-0xe05fffff) for rid 20 of pcib2 pcib2: domain 0 pcib2: secondary bus 10 pcib2: subordinate bus 10 pcib2: memory decode 0xe0500000-0xe05fffff pcib2: no prefetched decode pci10: on pcib2 pci10: domain=0, physical bus=10 found-> vendor=0x168c, dev=0x002e, revid=0x01 domain=0, bus=10, slot=0, func=0 class=02-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 3 supports D0 D1 D3 current D0 MSI supports 1 message map[10]: type Memory, range 64, base 0xe0500000, size 16, enabled pcib2: allocated memory range (0xe0500000-0xe050ffff) for rid 10 of pci0:10:0:0 pcib2: matched entry for 10.0.INTA pcib2: slot 0 INTA hardwired to IRQ 18 ath0: mem 0xe0500000-0xe050ffff irq 18 at device 0.0 on pci10 ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 0 vector 60 ath0: [HT] enabling HT modes ath0: [HT] enabling short-GI in 20MHz mode ath0: [HT] 1 stream STBC receive enabled ath0: [HT] 1 stream STBC transmit enabled ath0: [HT] 2 RX streams; 2 TX streams ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps ath0: 2T2R ath0: 11ng MCS 20MHz ath0: MCS 0-7: 6.5Mbps - 65Mbps ath0: MCS 8-15: 13Mbps - 130Mbps ath0: 11ng MCS 20MHz SGI ath0: MCS 0-7: 7Mbps - 72Mbps ath0: MCS 8-15: 14.5Mbps - 144.5Mbps ath0: 11ng MCS 40MHz: ath0: MCS 0-7: 13.5Mbps - 135Mbps ath0: MCS 8-15: 27Mbps - 270Mbps ath0: 11ng MCS 40MHz SGI: ath0: MCS 0-7: 15Mbps - 150Mbps ath0: MCS 8-15: 30Mbps - 300Mbps ath0: AR9287 mac 384.2 RF5133 phy 15.15 ath0: 2GHz radio: 0x0000; 5GHz radio: 0x00c0 ath0: Use hw queue 1 for WME_AC_BE traffic ath0: Use hw queue 0 for WME_AC_BK traffic ath0: Use hw queue 2 for WME_AC_VI traffic ath0: Use hw queue 3 for WME_AC_VO traffic ath0: Use hw queue 8 for CAB traffic ath0: Use hw queue 9 for beacons ath0: using multicast key search ehci1: mem 0xe2609000-0xe26093ff irq 22 at device 29.0 on pci0 ioapic0: routing intpin 22 (PCI IRQ 22) to lapic 0 vector 61 usbus1: EHCI version 1.0 usbus1 on ehci1 ehci1: usbpf: Attached isab0: at device 31.0 on pci0 isa0: on isab0 ahci0: port 0x3088-0x308f,0x3094-0x3097,0x3080-0x3087,0x3090-0x3093,0x3060-0x307f mem 0xe2608000-0xe26087ff irq 20 at device 31.2 on pci0 ahci0: attempting to allocate 1 MSI vectors (1 supported) msi: routing MSI IRQ 265 to local APIC 0 vector 62 ahci0: using IRQ 265 for MSI ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported ahci0: Caps: 64bit NCQ SNTF MPS ALP AL CLO 6Gbps PMD SSC PSC 32cmd EM 6ports ahci0: Caps2: APST ahcich0: at channel 0 on ahci0 ahcich0: Caps: ahcich1: not probed (disabled) ahcich2: not probed (disabled) ahcich3: not probed (disabled) ahcich4: not probed (disabled) ahcich5: not probed (disabled) ahciem0: on ahci0 ahciem0: Caps: ALHD XMT SMB LED ichsmb0: port 0xefa0-0xefbf mem 0xe2604000-0xe26040ff irq 19 at device 31.3 on pci0 ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 0 vector 63 smbus0: on ichsmb0 acpi_acad0: on acpi0 battery0: on acpi0 battery1: on acpi0 acpi_lid0: on acpi0 acpi_button0: on acpi0 acpi_button1: on acpi0 atkbdc0: port 0x60,0x64 irq 1 on acpi0 atkbd0: irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0067 atkbd: keyboard ID 0x54ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 64 atkbd0: [GIANT-LOCKED] psm0: unable to allocate IRQ psmcpnp0: irq 12 on acpi0 psm0: current command byte:0067 psm0: irq 12 on atkbdc0 ioapic0: routing intpin 12 (ISA IRQ 12) to lapic 0 vector 65 psm0: [GIANT-LOCKED] psm0: model Synaptics Touchpad, device ID 0-00, 5 buttons psm0: config:00004000, flags:00000008, packet size:6 psm0: syncmask:c0, syncbits:00 ACPI: Enabled 9 GPEs in block 00 to 3F acpi0: wakeup code va 0xffffff81198f6000 pa 0x90000 pcib0: allocated type 3 (0xa0000-0xa07ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa0800-0xa0fff) for rid 0 of orm0 pcib0: allocated type 3 (0xa1000-0xa17ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa1800-0xa1fff) for rid 0 of orm0 pcib0: allocated type 3 (0xa2000-0xa27ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa2800-0xa2fff) for rid 0 of orm0 pcib0: allocated type 3 (0xa3000-0xa37ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa3800-0xa3fff) for rid 0 of orm0 pcib0: allocated type 3 (0xa4000-0xa47ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa4800-0xa4fff) for rid 0 of orm0 pcib0: allocated type 3 (0xa5000-0xa57ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa5800-0xa5fff) for rid 0 of orm0 pcib0: allocated type 3 (0xa6000-0xa67ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa6800-0xa6fff) for rid 0 of orm0 pcib0: allocated type 3 (0xa7000-0xa77ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa7800-0xa7fff) for rid 0 of orm0 pcib0: allocated type 3 (0xa8000-0xa87ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa8800-0xa8fff) for rid 0 of orm0 pcib0: allocated type 3 (0xa9000-0xa97ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa9800-0xa9fff) for rid 0 of orm0 pcib0: allocated type 3 (0xaa000-0xaa7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xaa800-0xaafff) for rid 0 of orm0 pcib0: allocated type 3 (0xab000-0xab7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xab800-0xabfff) for rid 0 of orm0 pcib0: allocated type 3 (0xac000-0xac7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xac800-0xacfff) for rid 0 of orm0 pcib0: allocated type 3 (0xad000-0xad7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xad800-0xadfff) for rid 0 of orm0 pcib0: allocated type 3 (0xae000-0xae7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xae800-0xaefff) for rid 0 of orm0 pcib0: allocated type 3 (0xaf000-0xaf7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xaf800-0xaffff) for rid 0 of orm0 pcib0: allocated type 3 (0xb0000-0xb07ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb0800-0xb0fff) for rid 0 of orm0 pcib0: allocated type 3 (0xb1000-0xb17ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb1800-0xb1fff) for rid 0 of orm0 pcib0: allocated type 3 (0xb2000-0xb27ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb2800-0xb2fff) for rid 0 of orm0 pcib0: allocated type 3 (0xb3000-0xb37ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb3800-0xb3fff) for rid 0 of orm0 pcib0: allocated type 3 (0xb4000-0xb47ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb4800-0xb4fff) for rid 0 of orm0 pcib0: allocated type 3 (0xb5000-0xb57ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb5800-0xb5fff) for rid 0 of orm0 pcib0: allocated type 3 (0xb6000-0xb67ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb6800-0xb6fff) for rid 0 of orm0 pcib0: allocated type 3 (0xb7000-0xb77ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb7800-0xb7fff) for rid 0 of orm0 pcib0: allocated type 3 (0xb8000-0xb87ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb8800-0xb8fff) for rid 0 of orm0 pcib0: allocated type 3 (0xb9000-0xb97ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb9800-0xb9fff) for rid 0 of orm0 pcib0: allocated type 3 (0xba000-0xba7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xba800-0xbafff) for rid 0 of orm0 pcib0: allocated type 3 (0xbb000-0xbb7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xbb800-0xbbfff) for rid 0 of orm0 pcib0: allocated type 3 (0xbc000-0xbc7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xbc800-0xbcfff) for rid 0 of orm0 pcib0: allocated type 3 (0xbd000-0xbd7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xbd800-0xbdfff) for rid 0 of orm0 pcib0: allocated type 3 (0xbe000-0xbe7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xbe800-0xbefff) for rid 0 of orm0 pcib0: allocated type 3 (0xbf000-0xbf7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xbf800-0xbffff) for rid 0 of orm0 isa_probe_children: disabling PnP devices atkbdc: atkbdc0 already exists; skipping it atrtc: atrtc0 already exists; skipping it attimer: attimer0 already exists; skipping it sc: sc0 already exists; skipping it isa_probe_children: probing non-PnP devices orm0: at iomem 0xc0000-0xcefff on isa0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd1, terminal emulator: scteken (teken terminal) vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 pcib0: allocated type 4 (0x3c0-0x3df) for rid 0 of vga0 pcib0: allocated type 3 (0xa0000-0xbffff) for rid 0 of vga0 fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0 ppc0 failed to probe at irq 7 on isa0 uart0 failed to probe at port 0x3f8 irq 4 on isa0 uart1 failed to probe at port 0x2f8 irq 3 on isa0 wbwd0 failed to probe on isa0 isa_probe_children: probing PnP devices est0: on cpu0 est1: on cpu1 est2: on cpu2 est3: on cpu3 Device configuration finished. procfs registered Timecounters tick every 1.000 msec tcp_init: net.inet.tcp.tcbhashsize auto tuned to 32768 lo0: bpf attached hdacc0: at cad 0 on hdac0 hdaa0: at nid 1 on hdacc0 hdaa0: Subsystem ID: 0x10cf1100 hdaa0: NumGPIO=2 NumGPO=0 NumGPI=0 GPIWake=0 GPIUnsol=1 hdaa0: GPIO0: disabled hdaa0: GPIO1: disabled hdaa0: Original pins configuration: hdaa0: nid 0x as seq device conn jack loc color misc hdaa0: 18 90a60150 5 0 Mic Fixed Digital Internal Unknown 1 hdaa0: 20 90170110 1 0 Speaker Fixed Analog Internal Unknown 1 hdaa0: 23 411111f0 15 0 Speaker None 1/8 Rear Black 1 hdaa0: 24 02a11040 4 0 Mic Jack 1/8 Front Black 0 hdaa0: 25 411111f0 15 0 Speaker None 1/8 Rear Black 1 hdaa0: 26 2121101f 1 15 Headphones Jack 1/8 Ext-Rear Black 0 hdaa0: 27 21a11030 3 0 Mic Jack 1/8 Ext-Rear Black 0 hdaa0: 29 909701f0 15 0 AUX Fixed Analog Internal Unknown 1 hdaa0: 30 411111f0 15 0 Speaker None 1/8 Rear Black 1 hdaa0: 33 02211020 2 0 Headphones Jack 1/8 Front Black 0 hdaa0: Patching widget caps nid=29 0x00400000 -> 0x00700000 hdaa0: Patching pin config nid=18 0x90a60150 -> 0x90a6013f hdaa0: Patched pins configuration: hdaa0: nid 0x as seq device conn jack loc color misc hdaa0: 18 90a6013f 3 15 Mic Fixed Digital Internal Unknown 1 hdaa0: 20 90170110 1 0 Speaker Fixed Analog Internal Unknown 1 hdaa0: 23 411111f0 15 0 Speaker None 1/8 Rear Black 1 DISA hdaa0: 24 02a11040 4 0 Mic Jack 1/8 Front Black 0 hdaa0: 25 411111f0 15 0 Speaker None 1/8 Rear Black 1 DISA hdaa0: 26 2121101f 1 15 Headphones Jack 1/8 Ext-Rear Black 0 hdaa0: 27 21a11030 3 0 Mic Jack 1/8 Ext-Rear Black 0 hdaa0: 30 411111f0 15 0 Speaker None 1/8 Rear Black 1 DISA hdaa0: 33 02211020 2 0 Headphones Jack 1/8 Front Black 0 hdaa0: 4 associations found: hdaa0: Association 0 (1) out: hdaa0: Pin nid=20 seq=0 hdaa0: Pin nid=26 seq=15 hdaa0: Association 1 (2) out: hdaa0: Pin nid=33 seq=0 hdaa0: Association 2 (3) in: hdaa0: Pin nid=27 seq=0 hdaa0: Pin nid=18 seq=15 hdaa0: Association 3 (4) in: hdaa0: Pin nid=24 seq=0 hdaa0: Tracing association 0 (1) hdaa0: Pin 20 traced to DAC 2 hdaa0: Pin 26 traced to DAC 2 and hpredir 0 hdaa0: Association 0 (1) trace succeeded hdaa0: Tracing association 1 (2) hdaa0: Pin 33 traced to DAC 3 hdaa0: Association 1 (2) trace succeeded hdaa0: Tracing association 2 (3) hdaa0: Pin 27 traced to ADC 8 hdaa0: Unable to trace pin 18 to ADC 8, undo traces hdaa0: Pin 27 traced to ADC 9 hdaa0: Pin 18 traced to ADC 9 hdaa0: Association 2 (3) trace succeeded hdaa0: Tracing association 3 (4) hdaa0: Pin 24 traced to ADC 8 hdaa0: Association 3 (4) trace succeeded hdaa0: Looking for additional DAC for association 0 (1) hdaa0: Looking for additional DAC for association 1 (2) hdaa0: Looking for additional ADC for association 2 (3) hdaa0: Looking for additional ADC for association 3 (4) hdaa0: Tracing input monitor hdaa0: Tracing nid 11 to out hdaa0: nid 11 is input monitor hdaa0: Tracing nid 35 to out hdaa0: Tracing other input monitors hdaa0: Tracing nid 18 to out hdaa0: Tracing nid 24 to out hdaa0: Tracing nid 27 to out hdaa0: Tracing beeper hdaa0: Headphones redirection for association 0 nid=26 using unsolicited responses. hdaa0: Redirect output to: main hdaa0: FG config/quirks: forcestereo ivref50 ivref80 ivref100 ivref pcm0: at nid 20,26 and 27,18 on hdaa0 pcm0: Playback: pcm0: Stream cap: 0x00000001 PCM pcm0: PCM cap: 0x000e0560 16 20 24 bits, 44 48 96 192 KHz pcm0: DAC: 2 pcm0: pcm0: nid=20 [pin: Speaker (Fixed)] pcm0: + <- nid=12 [audio mixer] [src: pcm, mix] pcm0: + <- nid=2 [audio output] [src: pcm] pcm0: + <- nid=11 [audio mixer] [src: mix] pcm0: pcm0: nid=26 [pin: Headphones (Black Jack)] pcm0: + <- nid=12 [audio mixer] [src: pcm, mix] pcm0: + <- nid=2 [audio output] [src: pcm] pcm0: + <- nid=11 [audio mixer] [src: mix] pcm0: pcm0: Record: pcm0: Stream cap: 0x00000001 PCM pcm0: PCM cap: 0x000e0560 16 20 24 bits, 44 48 96 192 KHz pcm0: ADC: 9 pcm0: pcm0: nid=9 [audio input] pcm0: + <- nid=34 [audio selector] [src: speaker, line, mix, monitor] pcm0: + <- nid=27 [pin: Mic (Black Jack)] [src: line] pcm0: + <- nid=29 [beep widget] [src: speaker] pcm0: + <- nid=11 [audio mixer] [src: mix] pcm0: + <- nid=18 [pin: Mic (Fixed)] [src: monitor] pcm0: pcm0: Input Mix: pcm0: pcm0: nid=11 [audio mixer] pcm0: + <- nid=27 [pin: Mic (Black Jack)] [src: line] pcm0: + <- nid=29 [beep widget] [src: speaker] pcm0: pcm0: Master Volume (OSS: vol): -65/0dB pcm0: +- ctl 1 (nid 2 out): -65/0dB (88 steps) pcm0: +- ctl 10 (nid 12 in 0): mute pcm0: +- ctl 11 (nid 12 in 1): mute pcm0: +- ctl 17 (nid 20 in ): mute pcm0: +- ctl 22 (nid 26 in ): mute pcm0: pcm0: PCM Volume (OSS: pcm): -65/0dB pcm0: +- ctl 1 (nid 2 out): -65/0dB (88 steps) pcm0: +- ctl 10 (nid 12 in 0): mute pcm0: pcm0: Microphone2 Volume (OSS: monitor): 0/36dB pcm0: +- ctl 4 (nid 9 in 0): -16/30dB (32 steps) + mute pcm0: +- ctl 16 (nid 18 out): 0/36dB (4 steps) pcm0: pcm0: Line-in Volume (OSS: line): 0/36dB pcm0: +- ctl 4 (nid 9 in 0): -16/30dB (32 steps) + mute pcm0: +- ctl 8 (nid 11 in 3): -34/12dB (32 steps) + mute pcm0: +- ctl 25 (nid 27 out): 0/36dB (4 steps) pcm0: pcm0: Speaker/Beep Volume (OSS: speaker): -16/12dB pcm0: +- ctl 4 (nid 9 in 0): -16/30dB (32 steps) + mute pcm0: +- ctl 9 (nid 11 in 4): -34/12dB (32 steps) + mute pcm0: pcm0: Recording Level (OSS: rec): -16/30dB pcm0: +- ctl 4 (nid 9 in 0): -16/30dB (32 steps) + mute pcm0: +- ctl 16 (nid 18 out): 0/36dB (4 steps) pcm0: pcm0: Input Mix Level (OSS: mix): -16/30dB pcm0: +- ctl 4 (nid 9 in 0): -16/30dB (32 steps) + mute pcm0: +- ctl 11 (nid 12 in 1): mute pcm0: pcm0: Input Monitoring Level (OSS: igain): 0/0dB pcm0: +- ctl 11 (nid 12 in 1): mute pcm0: pcm0: Mixer "vol": pcm0: Mixer "pcm": pcm0: Mixer "speaker": pcm0: Mixer "line": pcm0: Mixer "mix": pcm0: Mixer "rec": pcm0: Mixer "igain": pcm0: Mixer "ogain": pcm0: Mixer "monitor": pcm0: Playback channel set is: Front Left, Front Right, pcm0: Playback channel matrix is: 2.0 (unknown) pcm0: Automatically set rec source to: monitor pcm0: Recording channel set is: Front Left, Front Right, pcm0: Recording channel matrix is: 2.0 (unknown) pcm1: at nid 33 and 24 on hdaa0 pcm1: Playback: pcm1: Stream cap: 0x00000001 PCM pcm1: PCM cap: 0x000e0560 16 20 24 bits, 44 48 96 192 KHz pcm1: DAC: 3 pcm1: pcm1: nid=33 [pin: Headphones (Black Jack)] pcm1: + <- nid=13 [audio mixer] [src: pcm, mix] pcm1: + <- nid=3 [audio output] [src: pcm] pcm1: + <- nid=11 [audio mixer] [src: mix] pcm1: pcm1: Record: pcm1: Stream cap: 0x00000001 PCM pcm1: PCM cap: 0x000e0560 16 20 24 bits, 44 48 96 192 KHz pcm1: ADC: 8 pcm1: pcm1: nid=8 [audio input] pcm1: + <- nid=35 [audio mixer] [src: speaker, mic] pcm1: + <- nid=24 [pin: Mic (Black Jack)] [src: mic] pcm1: + <- nid=29 [beep widget] [src: speaker] pcm1: pcm1: Master Volume (OSS: vol): -65/0dB pcm1: +- ctl 2 (nid 3 out): -65/0dB (88 steps) pcm1: +- ctl 12 (nid 13 in 0): mute pcm1: +- ctl 13 (nid 13 in 1): mute pcm1: +- ctl 26 (nid 33 in ): mute pcm1: pcm1: PCM Volume (OSS: pcm): -65/0dB pcm1: +- ctl 2 (nid 3 out): -65/0dB (88 steps) pcm1: +- ctl 12 (nid 13 in 0): mute pcm1: pcm1: Microphone Volume (OSS: mic): 0/36dB pcm1: +- ctl 20 (nid 24 out): 0/36dB (4 steps) pcm1: +- ctl 27 (nid 35 in 0): mute pcm1: pcm1: Speaker/Beep Volume (OSS: speaker) pcm1: +- ctl 31 (nid 35 in 4): mute pcm1: pcm1: Recording Level (OSS: rec): -16/30dB pcm1: +- ctl 3 (nid 8 in 0): -16/30dB (32 steps) + mute pcm1: +- ctl 20 (nid 24 out): 0/36dB (4 steps) pcm1: +- ctl 27 (nid 35 in 0): mute pcm1: +- ctl 31 (nid 35 in 4): mute pcm1: pcm1: Input Mix Level (OSS: mix) pcm1: +- ctl 13 (nid 13 in 1): mute pcm1: pcm1: Input Monitoring Level (OSS: igain): 0/0dB pcm1: +- ctl 13 (nid 13 in 1): mute pcm1: pcm1: Mixer "vol": pcm1: Mixer "pcm": pcm1: Mixer "mic": pcm1: Mixer "rec": pcm1: Mixer "igain": pcm1: Playback channel set is: Front Left, Front Right, pcm1: Playback channel matrix is: 2.0 (disconnected) pcm1: Recording channel set is: Front Left, Front Right, pcm1: Recording channel matrix is: 2.0 (disconnected) hdacc1: at cad 3 on hdac0 hdaa1: at nid 1 on hdacc1 hdaa1: Subsystem ID: 0x80860101 hdaa1: NumGPIO=0 NumGPO=0 NumGPI=0 GPIWake=0 GPIUnsol=0 hdaa1: Original pins configuration: hdaa1: nid 0x as seq device conn jack loc color misc hdaa1: 5 18560010 1 0 Digital-out Jack Digital 0x18 Unknown 0 hdaa1: 6 18560020 2 0 Digital-out Jack Digital 0x18 Unknown 0 hdaa1: 7 58560010 1 0 Digital-out None Digital 0x18 Unknown 0 hdaa1: Patched pins configuration: hdaa1: nid 0x as seq device conn jack loc color misc hdaa1: 5 18560010 1 0 Digital-out Jack Digital 0x18 Unknown 0 hdaa1: 6 18560020 2 0 Digital-out Jack Digital 0x18 Unknown 0 hdaa1: 7 58560010 1 0 Digital-out None Digital 0x18 Unknown 0 DISA hdaa1: 2 associations found: hdaa1: Association 0 (1) out: hdaa1: Pin nid=5 seq=0 hdaa1: Association 1 (2) out: hdaa1: Pin nid=6 seq=0 hdaa1: Tracing association 0 (1) hdaa1: Pin 5 traced to DAC 2 hdaa1: Association 0 (1) trace succeeded hdaa1: Tracing association 1 (2) hdaa1: Pin 6 traced to DAC 3 hdaa1: Association 1 (2) trace succeeded hdaa1: Looking for additional DAC for association 0 (1) hdaa1: Looking for additional DAC for association 1 (2) hdaa1: Tracing input monitor hdaa1: Tracing other input monitors hdaa1: Tracing beeper hdaa1: FG config/quirks: forcestereo ivref50 ivref80 ivref100 ivref pcm2: at nid 5 on hdaa1 pcm2: Playback: pcm2: Stream cap: 0x00000005 AC3 PCM pcm2: PCM cap: 0x001e07f0 16 20 24 32 bits, 32 44 48 88 96 176 192 KHz pcm2: DAC: 2 pcm2: pcm2: nid=5 [pin: Digital-out (Jack)] pcm2: + <- nid=2 [audio output] [src: pcm] pcm2: pcm2: Master Volume (OSS: vol): 0/0dB pcm2: +- ctl 1 (nid 5 in ): mute pcm2: pcm2: PCM Volume (OSS: pcm): 0/0dB pcm2: +- ctl 1 (nid 5 in ): mute pcm2: pcm2: Mixer "vol": pcm2: Mixer "pcm": pcm2: Soft PCM mixer ENABLED pcm2: Playback channel matrix is: unknown, assuming 7.1 (disconnected) pcm3: at nid 6 on hdaa1 pcm3: Playback: pcm3: Stream cap: 0x00000005 AC3 PCM pcm3: PCM cap: 0x001e07f0 16 20 24 32 bits, 32 44 48 88 96 176 192 KHz pcm3: DAC: 3 pcm3: pcm3: nid=6 [pin: Digital-out (Jack)] pcm3: + <- nid=3 [audio output] [src: pcm] pcm3: pcm3: Master Volume (OSS: vol): 0/0dB pcm3: +- ctl 2 (nid 6 in ): mute pcm3: pcm3: PCM Volume (OSS: pcm): 0/0dB pcm3: +- ctl 2 (nid 6 in ): mute pcm3: pcm3: Mixer "vol": pcm3: Mixer "pcm": pcm3: Soft PCM mixer ENABLED pcm3: Playback channel matrix is: unknown, assuming 7.1 (disconnected) usbus0: 480Mbps High Speed USB v2.0 usbus1: 480Mbps High Speed USB v2.0 ahcich0: AHCI reset... ahcich0: SATA connect time=100us status=00000133 ahcich0: AHCI reset: device found acpi_acad0: acline initialization start acpi_acad0: On Line acpi_acad0: acline initialization done, tried 1 times battery0: battery initialization start battery1: battery initialization start ugen1.1: at usbus1 uhub0: on usbus1 ugen0.1: at usbus0 uhub1: on usbus0 battery0: battery initialization done, tried 1 times battery1: battery initialization done, tried 1 times ahcich0: AHCI reset: device ready after 100ms pass0 at ahcich0 bus 0 scbus0 target 0 lun 0 pass0: ATA-9 SATA 3.x device pass0: Serial Number S12PNEACC28675T pass0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) pass0: Command Queueing enabled pass1 at ahciem0 bus 0 scbus1 target 0 lun 0 pass1: SEMB S-E-S 2.00 device ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: ATA-9 SATA 3.x device ada0: Serial Number S12PNEACC28675T ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 122104MB (250069680 512 byte sectors: 1H 63S/T 16383C) ada0: Previously was known as ad4 GEOM: new disk ada0 ses0 at ahciem0 bus 0 scbus1 target 0 lun 0 ses0: SEMB S-E-S 2.00 device ses0: SEMB SES Device ses0: Generation Code 0x0 has 1 SubEnclosures ses0: SubEnclosure ID 0, 1 Types With this ID, Descriptor Length 36, offset 8 ses0: WWN: 0 ses0: Type Desc[0]: Type 0x17, MaxElt 6, In Subenc 0, Text Length 0: lapic3: CMCI unmasked lapic2: CMCI unmasked SMP: AP CPU #1 Launched! cpu1 AP: ID: 0x01000000 VER: 0x01060015 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 cmci: 0x000100f2 SMP: AP CPU #2 Launched! cpu2 AP: ID: 0x02000000 VER: 0x01060015 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 cmci: 0x000000f2 SMP: AP CPU #3 Launched! cpu3 AP: ID: 0x03000000 VER: 0x01060015 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 cmci: 0x000000f2 ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 1 vector 48 ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 2 vector 48 ioapic0: routing intpin 12 (ISA IRQ 12) to lapic 3 vector 48 ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 1 vector 49 ioapic0: routing intpin 22 (PCI IRQ 22) to lapic 2 vector 49 ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 3 vector 49 msi: Assigning MSI-X IRQ 257 to local APIC 1 vector 50 msi: Assigning MSI-X IRQ 258 to local APIC 2 vector 50 msi: Assigning MSI-X IRQ 259 to local APIC 3 vector 50 msi: Assigning MSI IRQ 265 to local APIC 1 vector 51 SMP: passed TSC synchronization test TSC timecounter discards lower 1 bit(s) Timecounter "TSC-low" frequency 1097531412 Hz quality 1000 Root mount waiting for: usbus1 usbus0 Root mount waiting for: usbus1 usbus0 uhub1: 3 ports with 3 removable, self powered uhub0: 3 ports with 3 removable, self powered Root mount waiting for: usbus1 usbus0 ugen0.2: at usbus0 uhub2: on usbus0 ugen1.2: at usbus1 uhub3: on usbus1 Root mount waiting for: usbus1 usbus0 uhub2: 6 ports with 6 removable, self powered uhub3: 6 ports with 6 removable, self powered ugen0.3: at usbus0 Trying to mount root from ufs:/dev/ufs/ssdrootfs [ro,noatime]... start_init: trying /sbin/init Linux ELF exec handler installed linprocfs registered linsysfs registered wlan0: bpf attached wlan0: bpf attached wlan0: Ethernet address: e0:ca:94:7e:d0:0e ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to deny, logging disabled nfslock: pseudo-device wlan0: link state changed to UP agp0: on vgapci0 agp0: aperture size is 256M, detected 65532k stolen memory agp0: AGP_SNB_GFX_MODE: 00000000 agp0: AGP_SNB_GCC1: 0x0211 agp0: Mappable GTT entries: 65536 agp0: Total GTT entries: 524288 drmn0: on vgapci0 vgapci0: attempting to allocate 1 MSI vectors (1 supported) msi: routing MSI IRQ 266 to local APIC 2 vector 51 vgapci0: using IRQ 266 for MSI info: [drm] MSI enabled 1 message(s) info: [drm] AGP at 0xd0000000 256MB iicbus0: on iicbb0 addr 0xff iic0: on iicbus0 iic1: on iicbus1 iicbus2: on iicbb1 addr 0xff iic2: on iicbus2 iic3: on iicbus3 iicbus4: on iicbb2 addr 0xff iic4: on iicbus4 iic5: on iicbus5 iicbus6: on iicbb3 addr 0xff iic6: on iicbus6 iic7: on iicbus7 iicbus8: on iicbb4 addr 0xff iic8: on iicbus8 iic9: on iicbus9 iicbus10: on iicbb5 addr 0xff iic10: on iicbus10 iic11: on iicbus11 iicbus12: on iicbb6 addr 0xff iic12: on iicbus12 iic13: on iicbus13 iicbus14: on iicbb7 addr 0xff iic14: on iicbus14 iic15: on iicbus15 info: [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). info: [drm] Driver supports precise vblank timestamp query. info: [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp on drmn0: taking over the fictitious range 0xd0000000-0xe0000000 info: [drm] GMBUS timed out, falling back to bit banging on pin 7 [gmbus bus dpd] info: [drm] Initialized i915 1.6.0 20080730 --nextPart1597443.HtXXEyHsWF-- From owner-freebsd-x11@FreeBSD.ORG Tue May 21 20:44:13 2013 Return-Path: Delivered-To: freebsd-x11@freebsd.org Received: from mx1.freebsd.org (mx1.FreeBSD.org [8.8.178.115]) by hub.freebsd.org (Postfix) with ESMTP id 2BB94B34; Tue, 21 May 2013 20:44:13 +0000 (UTC) (envelope-from kob6558@gmail.com) Received: from mail-oa0-f49.google.com (mail-oa0-f49.google.com [209.85.219.49]) by mx1.freebsd.org (Postfix) with ESMTP id E2F19D00; Tue, 21 May 2013 20:44:12 +0000 (UTC) Received: by mail-oa0-f49.google.com with SMTP id k14so1460761oag.22 for ; Tue, 21 May 2013 13:44:12 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20120113; h=mime-version:sender:in-reply-to:references:date :x-google-sender-auth:message-id:subject:from:to:cc:content-type; bh=ZGHTalokEccS4aZIDQ991Z9f/6AlutFEqGVF6LnzkEM=; b=sW1Px4uHV7oneIjMR6oklMZmKAbZbPdWRVBJgRCqd4rqli0MofytFWQ301t1BPYTAi 1dka6diZqgIFudvF/tfym5USJuq86LhtPE+2COZIUakXr8ZP0K7/wK7+cf6+wtnJNnXZ PextXvRkMgQJKX3WiF3aBb1k/GtPboQbo5MzVE0uoWVD99+xXkT4HunKTv3sbzEOajp5 ZKhu/jZDoNGWelRv9p9zT2+H+Jbh6Be3K9bIyB3AogBellSCd0vMAABk6YIu2mgbxIP8 Qs5Wpjf2sxZTRM1U5aDSvmNTL9FBbXzkStt5EMM/3ExlgRm1IVs9Fv+k1h1JUeG2Scvt z65Q== MIME-Version: 1.0 X-Received: by 10.60.59.74 with SMTP id x10mr2642837oeq.48.1369169052309; Tue, 21 May 2013 13:44:12 -0700 (PDT) Sender: kob6558@gmail.com Received: by 10.76.182.76 with HTTP; Tue, 21 May 2013 13:44:12 -0700 (PDT) In-Reply-To: <1601171.hWXcdG7J9D@notebook.alkar.net> References: <1601171.hWXcdG7J9D@notebook.alkar.net> Date: Tue, 21 May 2013 13:44:12 -0700 X-Google-Sender-Auth: kcY9FPQSMrTheq1vL-ID6bNaGKU Message-ID: Subject: Re: FreeBSD-head hang when shutdown by ACPI with Intel GPU and new Xorg and SandyBridge From: Kevin Oberman To: Artyom Mirgorodskiy Content-Type: text/plain; charset=UTF-8 X-Content-Filtered-By: Mailman/MimeDel 2.1.14 Cc: "freebsd-x11@freebsd.org" , FreeBSD Current X-BeenThere: freebsd-x11@freebsd.org X-Mailman-Version: 2.1.14 Precedence: list List-Id: X11 on FreeBSD -- maintaining and support List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 21 May 2013 20:44:13 -0000 On Tue, May 21, 2013 at 12:50 PM, Artyom Mirgorodskiy < artyom.mirgorodsky@gmail.com> wrote: > Hi > More than a month I can not shutdown FreeBSD on my laptop correctly when > running Xorg with Intel GPU. However reboot work correctly. Shutdown work > fine if I choose Vesa driver in xorg.conf. So I can run with intel, then > edit xorg.conf, kill Xorg server and shutdown correctly. If I shut down > immediately after loading Xorg - everything is fine too. > Without the text console is difficult to provide any information :( Why > would still not recover mode when kill Xorg? > > PS > I try to disable RC6 states -without any changes. > FreeBSD shutdown correctly before January. > I am seeing similar issues on my Sandybridge running Xorg with KMS, but I see it on 9-Stable. The main difference between shutdown and reboot is that shutdown goes through the rc.d files and issues a 'stop' for each. reboot simply kills running processes, first by sending SIGTERM and then sending SIGKILL to those that still live. So something is failing to die and that "something" is probably X. The system still responds to ICMP ECHOREQUEST (i.e. ping), but I can't fire up an ssh session. As the KMS code does not switch the display mode back, once X with KMS starts, you can't get a console back. Since the system is deadlocked in this state, I suspect something bad is happening in the KMS code that leaves the system hung. I may try to run a firewire console. Never tried it, but it should work. From owner-freebsd-x11@FreeBSD.ORG Wed May 22 13:04:54 2013 Return-Path: Delivered-To: x11@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by hub.freebsd.org (Postfix) with ESMTP id C4007D5B for ; Wed, 22 May 2013 13:04:54 +0000 (UTC) (envelope-from portscout@portscout.freebsd.org) Received: from null.zi0r.com (null.zi0r.com [71.245.171.204]) by mx1.freebsd.org (Postfix) with ESMTP id 8E882E7D for ; Wed, 22 May 2013 13:04:54 +0000 (UTC) Received: from null.zi0r.com (localhost [127.0.0.1]) by null.zi0r.com (8.14.5/8.14.5) with ESMTP id r4MD4m3s092871 for ; Wed, 22 May 2013 09:04:48 -0400 (EDT) (envelope-from portscout@null.zi0r.com) Received: (from portscout@localhost) by null.zi0r.com (8.14.5/8.14.5/Submit) id r4MD4moQ092643; Wed, 22 May 2013 09:04:48 -0400 (EDT) (envelope-from portscout) Message-Id: <201305221304.r4MD4moQ092643@null.zi0r.com> MIME-Version: 1.0 Content-Disposition: inline Content-Transfer-Encoding: 8bit Content-Type: text/plain Date: Wed, 22 May 2013 09:04:48 -0400 From: portscout@portscout.freebsd.org To: x11@freebsd.org Subject: FreeBSD ports you maintain which are out of date X-Mailer: portscout/0.8.1 X-BeenThere: freebsd-x11@freebsd.org X-Mailman-Version: 2.1.14 Precedence: list List-Id: X11 on FreeBSD -- maintaining and support List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 22 May 2013 13:04:54 -0000 Dear port maintainer, The portscout new distfile checker has detected that one or more of your ports appears to be out of date. Please take the opportunity to check each of the ports listed below, and if possible and appropriate, submit/commit an update. If any ports have already been updated, you can safely ignore the entry. You will not be e-mailed again for any of the port/version combinations below. Full details can be found at the following URL: http://portscout.freebsd.org/x11@freebsd.org.html Port | Current version | New version ------------------------------------------------+-----------------+------------ graphics/dri | 7.6.1 | 9.1.3 ------------------------------------------------+-----------------+------------ graphics/libGL | 7.6.1 | 9.1.3 ------------------------------------------------+-----------------+------------ graphics/libGLU | 7.6.1 | 9.1.3 ------------------------------------------------+-----------------+------------ graphics/libGLw | 7.6.1 | 9.1.3 ------------------------------------------------+-----------------+------------ x11-drivers/xf86-video-intel | 2.7.1 | 2.21.7 ------------------------------------------------+-----------------+------------ If any of the above results are invalid, please check the following page for details on how to improve portscout's detection and selection of distfiles on a per-port basis: http://portscout.freebsd.org/info/portscout-portconfig.txt If wish to stop receiving portscout reminders, please contact portscout@portscout.freebsd.org Thanks. From owner-freebsd-x11@FreeBSD.ORG Thu May 23 13:27:26 2013 Return-Path: Delivered-To: freebsd-x11@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by hub.freebsd.org (Postfix) with ESMTP id D4A7F837 for ; Thu, 23 May 2013 13:27:26 +0000 (UTC) (envelope-from f0andrey@gmail.com) Received: from mail-oa0-f47.google.com (mail-oa0-f47.google.com [209.85.219.47]) by mx1.freebsd.org (Postfix) with ESMTP id A8D3CF8 for ; Thu, 23 May 2013 13:27:26 +0000 (UTC) Received: by mail-oa0-f47.google.com with SMTP id m1so4430317oag.34 for ; Thu, 23 May 2013 06:27:20 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20120113; h=mime-version:date:message-id:subject:from:to:content-type; bh=6LGI193GaNNjP9F+urJIiR7bPedzTdv33Jh5L0/u6f4=; b=znPfBeSV0yo6nq48h8GNdomYqmVQme6HcKY6dZ5uUU83/Y/3DYmCpMYn4Vyl58blUj Ei+xSgNm28ODiqVOzavH5uC7+Z09/Krq5cb17ONy4pa7y4zOj4iP/7vNCgiohB5dD1WI +15Zljey1uc6MSbB6vEFzG03YdebZglblABrLsBpeqUsw79ptPgmxG2s5Ugga8XPpCxL FSwXeJTFuGJ074bY30rkbjHIM/vC/ylRVepIDnIOo9B3Y60H29cuKhfJfeYlzMyOyx3P qw5QeaUffydow44LQtnKns59RczwQwxFmq6P++Z38x0YsQFl6QZEozn8thKTTzaDvMQT 7PtQ== MIME-Version: 1.0 X-Received: by 10.182.237.77 with SMTP id va13mr8356333obc.65.1369315640573; Thu, 23 May 2013 06:27:20 -0700 (PDT) Received: by 10.76.133.234 with HTTP; Thu, 23 May 2013 06:27:20 -0700 (PDT) Date: Thu, 23 May 2013 17:27:20 +0400 Message-ID: Subject: Re: [CFT] xorg 7.7 From: Andrey Fesenko To: freebsd-x11@freebsd.org Content-Type: text/plain; charset=UTF-8 X-BeenThere: freebsd-x11@freebsd.org X-Mailman-Version: 2.1.14 Precedence: list List-Id: X11 on FreeBSD -- maintaining and support List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 23 May 2013 13:27:26 -0000 > A patch against the ports tree is also available, and can be obtained > from http://people.freebsd.org/~zeising/xorg-7.7.diff . > Apply this using either svn patch /path/to/xorg-7.7.diff patching OK build error checking if cc supports -Werror... yes checking if cc supports -Werror=attributes... yes checking whether make supports nested variables... yes checking for XINPUT... yes checking for XI2... yes checking for XI21... no configure: error: Package requirements (xi >= 1.4.99.1 inputproto >= 2.0.99.1) were not met: Package dependency requirement 'xi >= 1.4.99.1' could not be satisfied. Package 'xi' has version '1.4.5', required version is '>= 1.4.99.1' Package dependency requirement 'inputproto >= 2.0.99.1' could not be satisfied. Package 'inputproto' has version '2.0.2', required version is '>= 2.0.99.1' Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. Alternatively, you may set the environment variables XI21_CFLAGS and XI21_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details. ===> Script "configure" failed unexpectedly. Please report the problem to x11@FreeBSD.org [maintainer] and attach the "/usr/ports/x11/xinput/work/xinput-1.6.0/config.log" including the output of the failure of your make command. Also, it might be a good idea to provide an overview of all packages installed on your system (e.g. a /usr/local/sbin/pkg info -g -Ea). *** [do-configure] Error code 1 Stop in /usr/ports/x11/xinput. *** [run-depends] Error code 1 Stop in /usr/ports/x11/xorg-apps. *** [install] Error code 1 Stop in /usr/ports/x11/xorg-apps. *** [run-depends] Error code 1 Stop in /usr/ports/x11/xorg. # uname -a FreeBSD x220.local 10.0-CURRENT FreeBSD 10.0-CURRENT #0 r249991: Sun Apr 28 01:47:26 MSK 2013 andrey@x220.local:/usr/obj/usr/src/sys/W_BOOK amd64 root@x220:/usr/ports/x11/xorg # grep XORG /etc/make.conf WITH_NEW_XORG=true From owner-freebsd-x11@FreeBSD.ORG Fri May 24 12:55:16 2013 Return-Path: Delivered-To: x11@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by hub.freebsd.org (Postfix) with ESMTP id 7C9BFB46 for ; Fri, 24 May 2013 12:55:16 +0000 (UTC) (envelope-from portscout@portscout.freebsd.org) Received: from null.zi0r.com (null.zi0r.com [71.245.171.204]) by mx1.freebsd.org (Postfix) with ESMTP id 454AAC1A for ; Fri, 24 May 2013 12:55:16 +0000 (UTC) Received: from null.zi0r.com (localhost [127.0.0.1]) by null.zi0r.com (8.14.5/8.14.5) with ESMTP id r4OCtAKh066992 for ; Fri, 24 May 2013 08:55:10 -0400 (EDT) (envelope-from portscout@null.zi0r.com) Received: (from portscout@localhost) by null.zi0r.com (8.14.5/8.14.5/Submit) id r4OCtApP066816; Fri, 24 May 2013 08:55:10 -0400 (EDT) (envelope-from portscout) Message-Id: <201305241255.r4OCtApP066816@null.zi0r.com> MIME-Version: 1.0 Content-Disposition: inline Content-Transfer-Encoding: 8bit Content-Type: text/plain Date: Fri, 24 May 2013 08:55:10 -0400 From: portscout@portscout.freebsd.org To: x11@freebsd.org Subject: FreeBSD ports you maintain which are out of date X-Mailer: portscout/0.8.1 X-BeenThere: freebsd-x11@freebsd.org X-Mailman-Version: 2.1.14 Precedence: list List-Id: X11 on FreeBSD -- maintaining and support List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 24 May 2013 12:55:16 -0000 Dear port maintainer, The portscout new distfile checker has detected that one or more of your ports appears to be out of date. Please take the opportunity to check each of the ports listed below, and if possible and appropriate, submit/commit an update. If any ports have already been updated, you can safely ignore the entry. You will not be e-mailed again for any of the port/version combinations below. Full details can be found at the following URL: http://portscout.freebsd.org/x11@freebsd.org.html Port | Current version | New version ------------------------------------------------+-----------------+------------ x11-drivers/xf86-video-openchrome | 0.2.904 | 0.3.3 ------------------------------------------------+-----------------+------------ If any of the above results are invalid, please check the following page for details on how to improve portscout's detection and selection of distfiles on a per-port basis: http://portscout.freebsd.org/info/portscout-portconfig.txt If wish to stop receiving portscout reminders, please contact portscout@portscout.freebsd.org Thanks. From owner-freebsd-x11@FreeBSD.ORG Sat May 25 12:47:20 2013 Return-Path: Delivered-To: x11@freebsd.org Received: from mx1.freebsd.org (mx1.FreeBSD.org [8.8.178.115]) by hub.freebsd.org (Postfix) with ESMTP id B436498D for ; Sat, 25 May 2013 12:47:20 +0000 (UTC) (envelope-from portscout@portscout.freebsd.org) Received: from null.zi0r.com (null.zi0r.com [71.245.171.204]) by mx1.freebsd.org (Postfix) with ESMTP id 7D38390 for ; Sat, 25 May 2013 12:47:20 +0000 (UTC) Received: from null.zi0r.com (localhost [127.0.0.1]) by null.zi0r.com (8.14.5/8.14.5) with ESMTP id r4PClJWT025187 for ; Sat, 25 May 2013 08:47:19 -0400 (EDT) (envelope-from portscout@null.zi0r.com) Received: (from portscout@localhost) by null.zi0r.com (8.14.5/8.14.5/Submit) id r4PClJVb024945; Sat, 25 May 2013 08:47:19 -0400 (EDT) (envelope-from portscout) Message-Id: <201305251247.r4PClJVb024945@null.zi0r.com> MIME-Version: 1.0 Content-Disposition: inline Content-Transfer-Encoding: 8bit Content-Type: text/plain Date: Sat, 25 May 2013 08:47:19 -0400 From: portscout@portscout.freebsd.org To: x11@freebsd.org Subject: FreeBSD ports you maintain which are out of date X-Mailer: portscout/0.8.1 X-BeenThere: freebsd-x11@freebsd.org X-Mailman-Version: 2.1.14 Precedence: list List-Id: X11 on FreeBSD -- maintaining and support List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 25 May 2013 12:47:20 -0000 Dear port maintainer, The portscout new distfile checker has detected that one or more of your ports appears to be out of date. Please take the opportunity to check each of the ports listed below, and if possible and appropriate, submit/commit an update. If any ports have already been updated, you can safely ignore the entry. You will not be e-mailed again for any of the port/version combinations below. Full details can be found at the following URL: http://portscout.freebsd.org/x11@freebsd.org.html Port | Current version | New version ------------------------------------------------+-----------------+------------ x11/libX11 | 1.4.4 | 1.5.99.902 ------------------------------------------------+-----------------+------------ x11/libXau | 1.0.6 | 1.0.8 ------------------------------------------------+-----------------+------------ If any of the above results are invalid, please check the following page for details on how to improve portscout's detection and selection of distfiles on a per-port basis: http://portscout.freebsd.org/info/portscout-portconfig.txt If wish to stop receiving portscout reminders, please contact portscout@portscout.freebsd.org Thanks. From owner-freebsd-x11@FreeBSD.ORG Sat May 25 14:41:51 2013 Return-Path: Delivered-To: x11@freeBSD.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by hub.freebsd.org (Postfix) with ESMTP id 64A769D; Sat, 25 May 2013 14:41:51 +0000 (UTC) (envelope-from zeising@freebsd.org) Received: from mail.lysator.liu.se (mail.lysator.liu.se [IPv6:2001:6b0:17:f0a0::3]) by mx1.freebsd.org (Postfix) with ESMTP id CC553380; Sat, 25 May 2013 14:41:47 +0000 (UTC) Received: from mail.lysator.liu.se (localhost [127.0.0.1]) by mail.lysator.liu.se (Postfix) with ESMTP id DFDA040004; Sat, 25 May 2013 16:41:44 +0200 (CEST) Received: by mail.lysator.liu.se (Postfix, from userid 1004) id D5AF140011; Sat, 25 May 2013 16:41:44 +0200 (CEST) X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on bernadotte.lysator.liu.se X-Spam-Level: X-Spam-Status: No, score=0.0 required=5.0 tests=AWL autolearn=disabled version=3.3.1 X-Spam-Score: 0.0 Received: from mx.daemonic.se (h-45-105.a163.priv.bahnhof.se [94.254.45.105]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (No client certificate requested) by mail.lysator.liu.se (Postfix) with ESMTPSA id 8C2C240004; Sat, 25 May 2013 16:41:44 +0200 (CEST) Received: from mailscanner.daemonic.se (mailscanner.daemonic.se [IPv6:2001:470:dca9:0:1::6]) by mx.daemonic.se (Postfix) with ESMTPS id 3bHnG01FS3z8hVm; Sat, 25 May 2013 16:41:44 +0200 (CEST) X-Virus-Scanned: amavisd-new at daemonic.se Received: from mx.daemonic.se ([10.1.0.3]) (using TLS with cipher CAMELLIA256-SHA) by mailscanner.daemonic.se (mailscanner.daemonic.se [10.1.0.6]) (amavisd-new, port 10025) with ESMTPS id tyPsHfL4UowQ; Sat, 25 May 2013 16:41:39 +0200 (CEST) Received: from mail.daemonic.se (mail.daemonic.se [10.1.0.4]) by mx.daemonic.se (Postfix) with ESMTPS id 3bHnFn2fbPz8hVn; Sat, 25 May 2013 16:41:33 +0200 (CEST) Received: from vivi.daemonic.se (vivi.daemonic.se [10.32.0.4]) by mail.daemonic.se (Postfix) with ESMTPSA id 3bHnFn1vV7z9Ctq; Sat, 25 May 2013 16:41:33 +0200 (CEST) Message-ID: <51A0CD8B.7040905@freebsd.org> Date: Sat, 25 May 2013 16:41:15 +0200 From: Niclas Zeising User-Agent: Mutt/1.5.21 MIME-Version: 1.0 To: ports@freebsd.org, x11@freeBSD.org Subject: [HEADS UP] xorg mega-update committed! (was: svn commit: r319055 ...) References: <201305251437.r4PEb3mF061983@svn.freebsd.org> In-Reply-To: <201305251437.r4PEb3mF061983@svn.freebsd.org> X-Enigmail-Version: 1.5.1 Content-Type: multipart/signed; micalg=pgp-sha512; protocol="application/pgp-signature"; boundary="----enig2JUOSPWLOHVQJAEDSWVOK" X-Virus-Scanned: ClamAV using ClamSMTP X-BeenThere: freebsd-x11@freebsd.org X-Mailman-Version: 2.1.14 Precedence: list List-Id: X11 on FreeBSD -- maintaining and support List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 25 May 2013 14:41:51 -0000 This is an OpenPGP/MIME signed message (RFC 4880 and 3156) ------enig2JUOSPWLOHVQJAEDSWVOK Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: quoted-printable HEADS UP! On 05/25/13 16:37, Niclas Zeising wrote: > Author: zeising > Date: Sat May 25 14:37:02 2013 > New Revision: 319055 > URL: http://svnweb.freebsd.org/changeset/ports/319055 >=20 > Log: > The FreeBSD x11 team proudly presents > an zeising, kwm, miwi, bapt, eadler production: > =20 > Xorg 7.7 > =20 > Starring: > xserver 1.12.4 (new xorg only) > Mesa 8.0.4, including libGL, libGLU and dri (new xorg only) > libX11 1.5.0 > libxcb 1.9 > libdrm 2.4.42 (new xorg only) > freeglut 2.8.1 > Also starring: > Updates to drivers and other libraries and utilities > =20 > Additional notes: > Change pkgconf to be a build dependency. > Add a new USE_XORG, xcb, to depend on libxcb and update all ports to = use > this. > Trim makefile headers. > Take maintanership of x11/xcb-proto, ok'd by ashish. > If you are running WITH_NEW_XORG=3D, you need to rebuild all installe= d > drivers, see UPDATING for more information. > Various fixes to make ports compile. > =20 > PR: ports/177942 > Exp-run by: miwi > Approved by: portmgr (miwi) > =20 > Thanks to all who helped testing! I'm around to help out if there is any fallout, just mail me or ping me on IRC. Regards! --=20 Niclas Zeising ------enig2JUOSPWLOHVQJAEDSWVOK Content-Type: application/pgp-signature; name="signature.asc" Content-Description: OpenPGP digital signature Content-Disposition: attachment; filename="signature.asc" -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.19 (FreeBSD) iQIcBAEBCgAGBQJRoM2dAAoJELuNS1e7i1VRD4AP/3LUZ5qlYDT5SD2ktb5oQDED XQtScZWC/mo7zJRHG55/uC1SvmPJzqHmItVmbszc9dmLmo/Fzn5HHaaBTtNVZOsr Ov0CTDHc8eMBQcAWaS8qc4K1ZuE9FiXypsj2ZvdWk/eNIsHh/oIkQSgbnsaxBQwt WdLG/tzrrD2Nzy4LJOBgMnPOE4t/fX0JAGQJkmgR81F7xzoTffId/sneqWnZBgXX zyGos3qzp53oVYTi36TgD1QvN8zxwRugvKwZN5m58x5Vib7P/0YBOO15BVnV7Yd2 m6amyBLdjU3oADBOVLwTCLU7MAQ0BtnqduxXVBSx+a/qgSiuqQqGNzzAN0IOeQ+2 rYTGuoMfSc7e/BzdZAHNOom0/2jhJxhcd22jTTs7CC7VHLW6VI1cbH5TkAX9sLP+ ffCVhLDsG7IU2I1G9GL81k+l+FyCNINVad/9vdh+BLENmKPaTRGmgYr3E8+uiT3y i6nWQPPMUNooUN9Fs0XJOAbI4c1XXx4Gw3EFY150KX9xOyTaFHcZ6JWqZfPJhlno WwRKwb4+mJpbvhndfhf4hsgv/EVAv+GQimmOgry7HKiCtXrpUa/kZASxNeP/+3TQ 5CEkw5LqeOk5k/yBZ+ELNKbv1eAphpheurYLfUPuAc7KkcHpzIt9VUl0kr0ZIU4M DnwRE9H8NBQLepDKdPxy =EZbb -----END PGP SIGNATURE----- ------enig2JUOSPWLOHVQJAEDSWVOK-- From owner-freebsd-x11@FreeBSD.ORG Sat May 25 14:53:57 2013 Return-Path: Delivered-To: freebsd-x11@smarthost.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.FreeBSD.org [8.8.178.115]) by hub.freebsd.org (Postfix) with ESMTP id 161312C1; Sat, 25 May 2013 14:53:57 +0000 (UTC) (envelope-from zeising@FreeBSD.org) Received: from freefall.freebsd.org (freefall.freebsd.org [IPv6:2001:1900:2254:206c::16:87]) by mx1.freebsd.org (Postfix) with ESMTP id E12CC3FD; Sat, 25 May 2013 14:53:56 +0000 (UTC) Received: from freefall.freebsd.org (localhost [127.0.0.1]) by freefall.freebsd.org (8.14.7/8.14.7) with ESMTP id r4PErunN081825; Sat, 25 May 2013 14:53:56 GMT (envelope-from zeising@freefall.freebsd.org) Received: (from zeising@localhost) by freefall.freebsd.org (8.14.7/8.14.7/Submit) id r4PEruJZ081824; Sat, 25 May 2013 14:53:56 GMT (envelope-from zeising) Date: Sat, 25 May 2013 14:53:56 GMT Message-Id: <201305251453.r4PEruJZ081824@freefall.freebsd.org> To: hiren@FreeBSD.org, zeising@FreeBSD.org, freebsd-x11@FreeBSD.org From: zeising@FreeBSD.org Subject: Re: ports/177843: port x11/xcb-proto port broken on arm X-BeenThere: freebsd-x11@freebsd.org X-Mailman-Version: 2.1.14 Precedence: list List-Id: X11 on FreeBSD -- maintaining and support List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 25 May 2013 14:53:57 -0000 Synopsis: port x11/xcb-proto port broken on arm State-Changed-From-To: open->feedback State-Changed-By: zeising State-Changed-When: Sat May 25 14:53:28 UTC 2013 State-Changed-Why: Port updated, waiting for feedback on the situation. http://www.freebsd.org/cgi/query-pr.cgi?pr=177843 From owner-freebsd-x11@FreeBSD.ORG Sat May 25 15:00:02 2013 Return-Path: Delivered-To: freebsd-x11@smarthost.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.FreeBSD.org [8.8.178.115]) by hub.freebsd.org (Postfix) with ESMTP id C140D41B for ; Sat, 25 May 2013 15:00:02 +0000 (UTC) (envelope-from gnats@FreeBSD.org) Received: from freefall.freebsd.org (freefall.freebsd.org [IPv6:2001:1900:2254:206c::16:87]) by mx1.freebsd.org (Postfix) with ESMTP id 9A65A5F8 for ; Sat, 25 May 2013 15:00:02 +0000 (UTC) Received: from freefall.freebsd.org (localhost [127.0.0.1]) by freefall.freebsd.org (8.14.7/8.14.7) with ESMTP id r4PF02XT082245 for ; Sat, 25 May 2013 15:00:02 GMT (envelope-from gnats@freefall.freebsd.org) Received: (from gnats@localhost) by freefall.freebsd.org (8.14.7/8.14.7/Submit) id r4PF024o082244; Sat, 25 May 2013 15:00:02 GMT (envelope-from gnats) Date: Sat, 25 May 2013 15:00:02 GMT Message-Id: <201305251500.r4PF024o082244@freefall.freebsd.org> To: freebsd-x11@FreeBSD.org Cc: From: Niclas Zeising Subject: Re: ports/177843: port x11/xcb-proto port broken on arm X-BeenThere: freebsd-x11@freebsd.org X-Mailman-Version: 2.1.14 Precedence: list Reply-To: Niclas Zeising List-Id: X11 on FreeBSD -- maintaining and support List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 25 May 2013 15:00:02 -0000 The following reply was made to PR ports/177843; it has been noted by GNATS. From: Niclas Zeising To: bug-followup@FreeBSD.org, hiren@FreeBSD.org Cc: Subject: Re: ports/177843: port x11/xcb-proto port broken on arm Date: Sat, 25 May 2013 16:52:50 +0200 xcb-proto was updated as part of the xorg mega-commit in r319055, can you check if this issue is solved with that commit? Regards! -- Niclas Zeising From owner-freebsd-x11@FreeBSD.ORG Sat May 25 17:00:15 2013 Return-Path: Delivered-To: freebsd-x11@smarthost.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.FreeBSD.org [8.8.178.115]) by hub.freebsd.org (Postfix) with ESMTP id 8D26B239; Sat, 25 May 2013 17:00:15 +0000 (UTC) (envelope-from edwin@FreeBSD.org) Received: from freefall.freebsd.org (freefall.freebsd.org [IPv6:2001:1900:2254:206c::16:87]) by mx1.freebsd.org (Postfix) with ESMTP id 686859FF; Sat, 25 May 2013 17:00:15 +0000 (UTC) Received: from freefall.freebsd.org (localhost [127.0.0.1]) by freefall.freebsd.org (8.14.7/8.14.7) with ESMTP id r4PH0FQb008098; Sat, 25 May 2013 17:00:15 GMT (envelope-from edwin@freefall.freebsd.org) Received: (from edwin@localhost) by freefall.freebsd.org (8.14.7/8.14.7/Submit) id r4PH0FtU008097; Sat, 25 May 2013 17:00:15 GMT (envelope-from edwin) Date: Sat, 25 May 2013 17:00:15 GMT Message-Id: <201305251700.r4PH0FtU008097@freefall.freebsd.org> To: edwin@FreeBSD.org, freebsd-ports-bugs@FreeBSD.org, freebsd-x11@FreeBSD.org From: edwin@FreeBSD.org Subject: Re: ports/178977: x11-drivers/xf86-video-intel: Assertion failed: (TheLoop->getLoopPreheader() X-BeenThere: freebsd-x11@freebsd.org X-Mailman-Version: 2.1.14 Precedence: list List-Id: X11 on FreeBSD -- maintaining and support List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 25 May 2013 17:00:15 -0000 Synopsis: x11-drivers/xf86-video-intel: Assertion failed: (TheLoop->getLoopPreheader() Responsible-Changed-From-To: freebsd-ports-bugs->freebsd-x11 Responsible-Changed-By: edwin Responsible-Changed-When: Sat May 25 17:00:15 UTC 2013 Responsible-Changed-Why: Over to maintainer (via the GNATS Auto Assign Tool) http://www.freebsd.org/cgi/query-pr.cgi?pr=178977 From owner-freebsd-x11@FreeBSD.ORG Sat May 25 17:20:03 2013 Return-Path: Delivered-To: freebsd-x11@smarthost.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.FreeBSD.org [8.8.178.115]) by hub.freebsd.org (Postfix) with ESMTP id 75C2FB26 for ; Sat, 25 May 2013 17:20:03 +0000 (UTC) (envelope-from gnats@FreeBSD.org) Received: from freefall.freebsd.org (freefall.freebsd.org [IPv6:2001:1900:2254:206c::16:87]) by mx1.freebsd.org (Postfix) with ESMTP id 4E0D8B21 for ; Sat, 25 May 2013 17:20:03 +0000 (UTC) Received: from freefall.freebsd.org (localhost [127.0.0.1]) by freefall.freebsd.org (8.14.7/8.14.7) with ESMTP id r4PHK3mv011317 for ; Sat, 25 May 2013 17:20:03 GMT (envelope-from gnats@freefall.freebsd.org) Received: (from gnats@localhost) by freefall.freebsd.org (8.14.7/8.14.7/Submit) id r4PHK3w9011316; Sat, 25 May 2013 17:20:03 GMT (envelope-from gnats) Date: Sat, 25 May 2013 17:20:03 GMT Message-Id: <201305251720.r4PHK3w9011316@freefall.freebsd.org> To: freebsd-x11@FreeBSD.org Cc: From: Niclas Zeising Subject: Re: ports/178977: x11-drivers/xf86-video-intel: Assertion failed: (TheLoop->getLoopPreheader() X-BeenThere: freebsd-x11@freebsd.org X-Mailman-Version: 2.1.14 Precedence: list Reply-To: Niclas Zeising List-Id: X11 on FreeBSD -- maintaining and support List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 25 May 2013 17:20:03 -0000 The following reply was made to PR ports/178977; it has been noted by GNATS. From: Niclas Zeising To: bug-followup@FreeBSD.org, ohartman@zedat.fu-berlin.de Cc: dim@freebsd.org Subject: Re: ports/178977: x11-drivers/xf86-video-intel: Assertion failed: (TheLoop->getLoopPreheader() Date: Sat, 25 May 2013 19:14:59 +0200 This is a problem with clang, rather than xorg. Can you please provide clang --version? Regards! -- Niclas Zeising From owner-freebsd-x11@FreeBSD.ORG Sat May 25 17:30:01 2013 Return-Path: Delivered-To: freebsd-x11@smarthost.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by hub.freebsd.org (Postfix) with ESMTP id 430E3D22 for ; Sat, 25 May 2013 17:30:01 +0000 (UTC) (envelope-from gnats@FreeBSD.org) Received: from freefall.freebsd.org (freefall.freebsd.org [IPv6:2001:1900:2254:206c::16:87]) by mx1.freebsd.org (Postfix) with ESMTP id 35D7EB68 for ; Sat, 25 May 2013 17:30:01 +0000 (UTC) Received: from freefall.freebsd.org (localhost [127.0.0.1]) by freefall.freebsd.org (8.14.7/8.14.7) with ESMTP id r4PHU0eR013446 for ; Sat, 25 May 2013 17:30:00 GMT (envelope-from gnats@freefall.freebsd.org) Received: (from gnats@localhost) by freefall.freebsd.org (8.14.7/8.14.7/Submit) id r4PHU0hi013445; Sat, 25 May 2013 17:30:00 GMT (envelope-from gnats) Date: Sat, 25 May 2013 17:30:00 GMT Message-Id: <201305251730.r4PHU0hi013445@freefall.freebsd.org> To: freebsd-x11@FreeBSD.org Cc: From: Niclas Zeising Subject: Re: ports/178977: x11-drivers/xf86-video-intel: Assertion failed: (TheLoop->getLoopPreheader() X-BeenThere: freebsd-x11@freebsd.org X-Mailman-Version: 2.1.14 Precedence: list Reply-To: Niclas Zeising List-Id: X11 on FreeBSD -- maintaining and support List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 25 May 2013 17:30:01 -0000 The following reply was made to PR ports/178977; it has been noted by GNATS. From: Niclas Zeising To: bug-followup@FreeBSD.org, ohartman@zedat.fu-berlin.de Cc: dim@freebsd.org Subject: Re: ports/178977: x11-drivers/xf86-video-intel: Assertion failed: (TheLoop->getLoopPreheader() Date: Sat, 25 May 2013 19:22:37 +0200 I need to learn to read the PR more properly... The clang version was in there. However, can you try compiling without any special CFLAGS, I believe you've manually put -O3 in there? Just to get more data points. Also, attached the mentioned files (in the transcript) to the PR, if at all possible. Regards! -- Niclas Zeising From owner-freebsd-x11@FreeBSD.ORG Sat May 25 18:20:01 2013 Return-Path: Delivered-To: freebsd-x11@smarthost.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by hub.freebsd.org (Postfix) with ESMTP id 91A71994 for ; Sat, 25 May 2013 18:20:01 +0000 (UTC) (envelope-from gnats@FreeBSD.org) Received: from freefall.freebsd.org (freefall.freebsd.org [IPv6:2001:1900:2254:206c::16:87]) by mx1.freebsd.org (Postfix) with ESMTP id 83AAFE1A for ; Sat, 25 May 2013 18:20:01 +0000 (UTC) Received: from freefall.freebsd.org (localhost [127.0.0.1]) by freefall.freebsd.org (8.14.7/8.14.7) with ESMTP id r4PIK1mD023168 for ; Sat, 25 May 2013 18:20:01 GMT (envelope-from gnats@freefall.freebsd.org) Received: (from gnats@localhost) by freefall.freebsd.org (8.14.7/8.14.7/Submit) id r4PIK11G023167; Sat, 25 May 2013 18:20:01 GMT (envelope-from gnats) Date: Sat, 25 May 2013 18:20:01 GMT Message-Id: <201305251820.r4PIK11G023167@freefall.freebsd.org> To: freebsd-x11@FreeBSD.org Cc: From: Dimitry Andric Subject: Re: ports/178977: x11-drivers/xf86-video-intel: Assertion failed: (TheLoop-> getLoopPreheader() X-BeenThere: freebsd-x11@freebsd.org X-Mailman-Version: 2.1.14 Precedence: list Reply-To: Dimitry Andric List-Id: X11 on FreeBSD -- maintaining and support List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 25 May 2013 18:20:01 -0000 The following reply was made to PR ports/178977; it has been noted by GNATS. From: Dimitry Andric To: bug-followup@FreeBSD.org, ohartman@zedat.fu-berlin.de Cc: Subject: Re: ports/178977: x11-drivers/xf86-video-intel: Assertion failed: (TheLoop->getLoopPreheader() Date: Sat, 25 May 2013 20:17:17 +0200 This looks like , a bug in the vectorizer (which is enabled by default at -O3). Can you please post the /tmp/sna_accel-cXtZCu.c and /tmp/sna_accel-cXtZCu.sh files it has dropped? If you are feeling adventurous, apply the following patch to contrib/llvm: = and rebuild clang: cd /usr/src/lib/clang/libllvmvectorize && make cd /usr/src/usr.bin/clang/clang && make && sudo make install From owner-freebsd-x11@FreeBSD.ORG Sat May 25 18:30:01 2013 Return-Path: Delivered-To: freebsd-x11@smarthost.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by hub.freebsd.org (Postfix) with ESMTP id 81973CB0 for ; Sat, 25 May 2013 18:30:01 +0000 (UTC) (envelope-from gnats@FreeBSD.org) Received: from freefall.freebsd.org (freefall.freebsd.org [IPv6:2001:1900:2254:206c::16:87]) by mx1.freebsd.org (Postfix) with ESMTP id 73C75E8B for ; Sat, 25 May 2013 18:30:01 +0000 (UTC) Received: from freefall.freebsd.org (localhost [127.0.0.1]) by freefall.freebsd.org (8.14.7/8.14.7) with ESMTP id r4PIU1Ig025288 for ; Sat, 25 May 2013 18:30:01 GMT (envelope-from gnats@freefall.freebsd.org) Received: (from gnats@localhost) by freefall.freebsd.org (8.14.7/8.14.7/Submit) id r4PIU1N2025287; Sat, 25 May 2013 18:30:01 GMT (envelope-from gnats) Date: Sat, 25 May 2013 18:30:01 GMT Message-Id: <201305251830.r4PIU1N2025287@freefall.freebsd.org> To: freebsd-x11@FreeBSD.org Cc: From: "O. Hartmann" Subject: Re: ports/178977: x11-drivers/xf86-video-intel: Assertion failed: (TheLoop->getLoopPreheader() X-BeenThere: freebsd-x11@freebsd.org X-Mailman-Version: 2.1.14 Precedence: list Reply-To: "O. Hartmann" List-Id: X11 on FreeBSD -- maintaining and support List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 25 May 2013 18:30:01 -0000 The following reply was made to PR ports/178977; it has been noted by GNATS. From: "O. Hartmann" To: Niclas Zeising Cc: bug-followup@FreeBSD.org, dim@freebsd.org Subject: Re: ports/178977: x11-drivers/xf86-video-intel: Assertion failed: (TheLoop->getLoopPreheader() Date: Sat, 25 May 2013 20:20:40 +0200 --=-YwWxH+cNxKu+83vYM2w/ Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable On Sat, 2013-05-25 at 19:14 +0200, Niclas Zeising wrote: > This is a problem with clang, rather than xorg. Can you please provide > clang --version? > Regards! Here it is: FreeBSD clang version 3.3 (trunk 178860) 20130405 Target: x86_64-unknown-freebsd10.0 Thread model: posix --=-YwWxH+cNxKu+83vYM2w/ Content-Type: application/pgp-signature; name="signature.asc" Content-Description: This is a digitally signed message part -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.13 (FreeBSD) iQEcBAABAgAGBQJRoQD4AAoJEOgBcD7A/5N8NO8IANFrXauAV0Lrf2tAgHLzJCSz nr2mN3lu44qd0zInPA5IIdd723Y18xA971vGVcqJwWpeYMKNM4EWmjmBsL+/TUEm QD8oDQiPJl76dvAg3xdWAGTkqjE508nxhNWhY7WXxuKW3QRbza3sIyOzl9vbMN/V kYwAf9np9Ut0m2jAiWrctU1Z5jn+pncLDc2CA22eW4lGHQQTz7fs4Yj2Kbq9f0WN ZHvmIV2KR0maLmwF9cri458mVkAnmjjQfnzW9z1n4IfYFYGHWRZxnjae/vRTP6P4 IuR8LJoCcL2XKPJsUGPZGDN9MzU7IkCPxAYm3Gp6iH64XAgUU+kzxgPxXW4rEaY= =Mhab -----END PGP SIGNATURE----- --=-YwWxH+cNxKu+83vYM2w/-- From owner-freebsd-x11@FreeBSD.ORG Sat May 25 19:00:02 2013 Return-Path: Delivered-To: freebsd-x11@smarthost.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.FreeBSD.org [8.8.178.115]) by hub.freebsd.org (Postfix) with ESMTP id CE425872 for ; Sat, 25 May 2013 19:00:02 +0000 (UTC) (envelope-from gnats@FreeBSD.org) Received: from freefall.freebsd.org (freefall.freebsd.org [IPv6:2001:1900:2254:206c::16:87]) by mx1.freebsd.org (Postfix) with ESMTP id B1B9DFF5 for ; Sat, 25 May 2013 19:00:02 +0000 (UTC) Received: from freefall.freebsd.org (localhost [127.0.0.1]) by freefall.freebsd.org (8.14.7/8.14.7) with ESMTP id r4PJ02xg030766 for ; Sat, 25 May 2013 19:00:02 GMT (envelope-from gnats@freefall.freebsd.org) Received: (from gnats@localhost) by freefall.freebsd.org (8.14.7/8.14.7/Submit) id r4PJ0282030765; Sat, 25 May 2013 19:00:02 GMT (envelope-from gnats) Date: Sat, 25 May 2013 19:00:02 GMT Message-Id: <201305251900.r4PJ0282030765@freefall.freebsd.org> To: freebsd-x11@FreeBSD.org Cc: From: "O. Hartmann" Subject: Re: ports/178977: x11-drivers/xf86-video-intel: Assertion failed: (TheLoop->getLoopPreheader() X-BeenThere: freebsd-x11@freebsd.org X-Mailman-Version: 2.1.14 Precedence: list Reply-To: "O. Hartmann" List-Id: X11 on FreeBSD -- maintaining and support List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 25 May 2013 19:00:03 -0000 The following reply was made to PR ports/178977; it has been noted by GNATS. From: "O. Hartmann" To: Dimitry Andric Cc: bug-followup@FreeBSD.org Subject: Re: ports/178977: x11-drivers/xf86-video-intel: Assertion failed: (TheLoop->getLoopPreheader() Date: Sat, 25 May 2013 20:55:27 +0200 --=-7W07MXWtnrgrMbGxjNwR Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable The Email has been "intercepted" by the filter at bugmaster@freebsd.org, I guess due to the attachments. On Sat, 2013-05-25 at 20:17 +0200, Dimitry Andric wrote: > This looks like , a bug in > the vectorizer (which is enabled by default at -O3). Can you please > post the /tmp/sna_accel-cXtZCu.c and /tmp/sna_accel-cXtZCu.sh files it > has dropped? >=20 > If you are feeling adventurous, apply the following patch to > contrib/llvm: >=20 > >=20 > and rebuild clang: >=20 > cd /usr/src/lib/clang/libllvmvectorize && make > cd /usr/src/usr.bin/clang/clang && make && sudo make install On Sat, 2013-05-25 at 20:17 +0200, Dimitry Andric wrote: > This looks like , a bug in > the vectorizer (which is enabled by default at -O3). Can you please > post the /tmp/sna_accel-cXtZCu.c and /tmp/sna_accel-cXtZCu.sh files it > has dropped? Attached, as requested ... But it is this time:=20 sna_accel-y67zua.c and sna_accel-y67zua.sh due to another run. >=20 > If you are feeling adventurous, apply the following patch to > contrib/llvm: Since I bother you having -O3 enabled for compiling ports, although its considered "dangerous" I have no choice, havn't I? ;-) >=20 > >=20 > and rebuild clang: >=20 > cd /usr/src/lib/clang/libllvmvectorize && make > cd /usr/src/usr.bin/clang/clang && make && sudo make install With the patch applied, x11-drivers/xf86-video-intel builds, but I can not say whether it works, since I have no X11 on an Intel iGPU. Thanks, the issue should be closed due to my -O3 compiling. Or marked fixed with the provided patch? Greetings, Oliver --=-7W07MXWtnrgrMbGxjNwR Content-Type: application/pgp-signature; name="signature.asc" Content-Description: This is a digitally signed message part -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.13 (FreeBSD) iQEcBAABAgAGBQJRoQkfAAoJEOgBcD7A/5N85kYH/Rw1SV3p9KmzbGAqCCdlaSKI 3WEklsaWprE/cuyjTdpQk1DPupuONIdq4rUJUUTWJ8VYOkK8Jle0Oi1pGZPDRA8l 11+mUEZFS0i2uZqrYkV5NO20zpV1tzNBesahRIz8/ul5NmuBmBRxGN/Wkm8WjJiT HWzAhRmO27H8w9JEcbI+Iq4g2nzF8B320yTXQ0ZZQgoQfmEDK/Q6xN59FUNotV0h AZM74sgSdG8Rva43FMQ5KtOy112FnsqD1BR93vA+slLZvmlgbUlXztk2wmQlUATw Bxh1gDXiQYfFOcu5kCDNLujUpmaMaOIH4haxgXpLEC4auHZqwgPStiQTKfwnkm4= =c6xy -----END PGP SIGNATURE----- --=-7W07MXWtnrgrMbGxjNwR-- From owner-freebsd-x11@FreeBSD.ORG Sat May 25 19:00:03 2013 Return-Path: Delivered-To: freebsd-x11@smarthost.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.FreeBSD.org [8.8.178.115]) by hub.freebsd.org (Postfix) with ESMTP id C628A873 for ; Sat, 25 May 2013 19:00:03 +0000 (UTC) (envelope-from gnats@FreeBSD.org) Received: from freefall.freebsd.org (freefall.freebsd.org [IPv6:2001:1900:2254:206c::16:87]) by mx1.freebsd.org (Postfix) with ESMTP id B8A2EFF7 for ; Sat, 25 May 2013 19:00:03 +0000 (UTC) Received: from freefall.freebsd.org (localhost [127.0.0.1]) by freefall.freebsd.org (8.14.7/8.14.7) with ESMTP id r4PJ03F2030772 for ; Sat, 25 May 2013 19:00:03 GMT (envelope-from gnats@freefall.freebsd.org) Received: (from gnats@localhost) by freefall.freebsd.org (8.14.7/8.14.7/Submit) id r4PJ03S6030771; Sat, 25 May 2013 19:00:03 GMT (envelope-from gnats) Date: Sat, 25 May 2013 19:00:03 GMT Message-Id: <201305251900.r4PJ03S6030771@freefall.freebsd.org> To: freebsd-x11@FreeBSD.org Cc: From: "O. Hartmann" Subject: Re: ports/178977: x11-drivers/xf86-video-intel: Assertion failed: (TheLoop->getLoopPreheader() X-BeenThere: freebsd-x11@freebsd.org X-Mailman-Version: 2.1.14 Precedence: list Reply-To: "O. Hartmann" List-Id: X11 on FreeBSD -- maintaining and support List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 25 May 2013 19:00:03 -0000 The following reply was made to PR ports/178977; it has been noted by GNATS. From: "O. Hartmann" To: Niclas Zeising Cc: bug-followup@FreeBSD.org, dim@freebsd.org Subject: Re: ports/178977: x11-drivers/xf86-video-intel: Assertion failed: (TheLoop->getLoopPreheader() Date: Sat, 25 May 2013 20:52:55 +0200 --=-xYMuHimFAvSUKGxX6mxW Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable On Sat, 2013-05-25 at 19:22 +0200, Niclas Zeising wrote: > I need to learn to read the PR more properly... The clang version was > in there. However, can you try compiling without any special CFLAGS, I > believe you've manually put -O3 in there? Just to get more data points. > Also, attached the mentioned files (in the transcript) to the PR, if at > all possible. > Regards! Hello Niclas, sorry, my fault. I compile with -O3 and as Dimitry already stated, it is indeed the fault of this -O3 option. I should read the error message more carefully, since there was already a hint that it could be the -O3 optimization :-( Oliver --=-xYMuHimFAvSUKGxX6mxW Content-Type: application/pgp-signature; name="signature.asc" Content-Description: This is a digitally signed message part -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.13 (FreeBSD) iQEcBAABAgAGBQJRoQiHAAoJEOgBcD7A/5N8Am4H/3tHjzseMp+fqKO5Np7qkckZ vbzOYuGGhRxyIkkG6QtXbHg/4pp9LUzGjJzlxg9Z5h6ZogWTt9Y/pMqn0mq+93q9 rKqVIxfc6A0pwFETFnHccDUB8IaRgAnZvzu9GnUVrA+6TZKeo5GZCHdPVfUskYF/ PbFXafn7g/IwHgEaL9WTmguSP8TuQ2EJWY0b5WcSZCsNY11KcCqRuxBshOkvuA7s wckbpzUrEZI0V1eiLvMI7LRpZHWzAw/378ts0PpGHARO1+wJg8UIgq5WlQ/BQASf RlA1Sex0PxC1s+fsxxTjHGn5NpdHmXKsPKvReMLgoKQw77txkCoG5VeUfDzxO9k= =iTrd -----END PGP SIGNATURE----- --=-xYMuHimFAvSUKGxX6mxW-- From owner-freebsd-x11@FreeBSD.ORG Sat May 25 19:10:01 2013 Return-Path: Delivered-To: freebsd-x11@smarthost.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.FreeBSD.org [8.8.178.115]) by hub.freebsd.org (Postfix) with ESMTP id 9B511A35 for ; Sat, 25 May 2013 19:10:01 +0000 (UTC) (envelope-from gnats@FreeBSD.org) Received: from freefall.freebsd.org (freefall.freebsd.org [IPv6:2001:1900:2254:206c::16:87]) by mx1.freebsd.org (Postfix) with ESMTP id 8C90CD4 for ; Sat, 25 May 2013 19:10:01 +0000 (UTC) Received: from freefall.freebsd.org (localhost [127.0.0.1]) by freefall.freebsd.org (8.14.7/8.14.7) with ESMTP id r4PJA1We032702 for ; Sat, 25 May 2013 19:10:01 GMT (envelope-from gnats@freefall.freebsd.org) Received: (from gnats@localhost) by freefall.freebsd.org (8.14.7/8.14.7/Submit) id r4PJA1nL032701; Sat, 25 May 2013 19:10:01 GMT (envelope-from gnats) Date: Sat, 25 May 2013 19:10:01 GMT Message-Id: <201305251910.r4PJA1nL032701@freefall.freebsd.org> To: freebsd-x11@FreeBSD.org Cc: From: Dimitry Andric Subject: Re: ports/178977: x11-drivers/xf86-video-intel: Assertion failed: (TheLoop-> getLoopPreheader() X-BeenThere: freebsd-x11@freebsd.org X-Mailman-Version: 2.1.14 Precedence: list Reply-To: Dimitry Andric List-Id: X11 on FreeBSD -- maintaining and support List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 25 May 2013 19:10:01 -0000 The following reply was made to PR ports/178977; it has been noted by GNATS. From: Dimitry Andric To: "O. Hartmann" Cc: bug-followup@FreeBSD.org Subject: Re: ports/178977: x11-drivers/xf86-video-intel: Assertion failed: (TheLoop->getLoopPreheader() Date: Sat, 25 May 2013 21:00:58 +0200 On May 25, 2013, at 20:44, "O. Hartmann" = wrote: > On Sat, 2013-05-25 at 20:17 +0200, Dimitry Andric wrote: >> This looks like , a bug = in >> the vectorizer (which is enabled by default at -O3). ... >> = >>=20 >> and rebuild clang: >>=20 >> cd /usr/src/lib/clang/libllvmvectorize && make >> cd /usr/src/usr.bin/clang/clang && make && sudo make install >=20 > With the patch applied, x11-drivers/xf86-video-intel builds, but I can > not say whether it works, since I have no X11 on an Intel iGPU. >=20 > Thanks, the issue should be closed due to my -O3 compiling. Or marked > fixed with the provided patch? I will import the fix for clang from upstream. I also think it will go into the 3.3 branch, but better to fix the issue now, before too many people encounter it... From owner-freebsd-x11@FreeBSD.ORG Sat May 25 19:42:01 2013 Return-Path: Delivered-To: freebsd-x11@smarthost.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by hub.freebsd.org (Postfix) with ESMTP id 0EABB140; Sat, 25 May 2013 19:42:01 +0000 (UTC) (envelope-from zeising@FreeBSD.org) Received: from freefall.freebsd.org (freefall.freebsd.org [IPv6:2001:1900:2254:206c::16:87]) by mx1.freebsd.org (Postfix) with ESMTP id D9F571DB; Sat, 25 May 2013 19:42:00 +0000 (UTC) Received: from freefall.freebsd.org (localhost [127.0.0.1]) by freefall.freebsd.org (8.14.7/8.14.7) with ESMTP id r4PJg0Do040177; Sat, 25 May 2013 19:42:00 GMT (envelope-from zeising@freefall.freebsd.org) Received: (from zeising@localhost) by freefall.freebsd.org (8.14.7/8.14.7/Submit) id r4PJg0oZ040176; Sat, 25 May 2013 19:42:00 GMT (envelope-from zeising) Date: Sat, 25 May 2013 19:42:00 GMT Message-Id: <201305251942.r4PJg0oZ040176@freefall.freebsd.org> To: ohartman@zedat.fu-berlin.de, zeising@FreeBSD.org, freebsd-x11@FreeBSD.org From: zeising@FreeBSD.org Subject: Re: ports/178977: x11-drivers/xf86-video-intel: Assertion failed: (TheLoop->getLoopPreheader() X-BeenThere: freebsd-x11@freebsd.org X-Mailman-Version: 2.1.14 Precedence: list List-Id: X11 on FreeBSD -- maintaining and support List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 25 May 2013 19:42:01 -0000 Synopsis: x11-drivers/xf86-video-intel: Assertion failed: (TheLoop->getLoopPreheader() State-Changed-From-To: open->closed State-Changed-By: zeising State-Changed-When: Sat May 25 19:42:00 UTC 2013 State-Changed-Why: This is an issue with clang on current when compiling with the nondefault setting -O3. It has been reported upstream to clang/llvm developers. Closing this PR. http://www.freebsd.org/cgi/query-pr.cgi?pr=178977 From owner-freebsd-x11@FreeBSD.ORG Sat May 25 20:18:56 2013 Return-Path: Delivered-To: freebsd-x11@smarthost.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.FreeBSD.org [8.8.178.115]) by hub.freebsd.org (Postfix) with ESMTP id 8A9FEF13; Sat, 25 May 2013 20:18:56 +0000 (UTC) (envelope-from az@FreeBSD.org) Received: from freefall.freebsd.org (freefall.freebsd.org [IPv6:2001:1900:2254:206c::16:87]) by mx1.freebsd.org (Postfix) with ESMTP id 64E323D9; Sat, 25 May 2013 20:18:56 +0000 (UTC) Received: from freefall.freebsd.org (localhost [127.0.0.1]) by freefall.freebsd.org (8.14.7/8.14.7) with ESMTP id r4PKIu30046588; Sat, 25 May 2013 20:18:56 GMT (envelope-from az@freefall.freebsd.org) Received: (from az@localhost) by freefall.freebsd.org (8.14.7/8.14.7/Submit) id r4PKItYM046587; Sat, 25 May 2013 20:18:55 GMT (envelope-from az) Date: Sat, 25 May 2013 20:18:55 GMT Message-Id: <201305252018.r4PKItYM046587@freefall.freebsd.org> To: dcarmich@dcarmichael.net, az@FreeBSD.org, freebsd-x11@FreeBSD.org From: az@FreeBSD.org Subject: Re: ports/177068: I have updated x11-drivers/xf86-input-vmmouse to 13.0.0 X-BeenThere: freebsd-x11@freebsd.org X-Mailman-Version: 2.1.14 Precedence: list List-Id: X11 on FreeBSD -- maintaining and support List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 25 May 2013 20:18:56 -0000 Synopsis: I have updated x11-drivers/xf86-input-vmmouse to 13.0.0 State-Changed-From-To: open->closed State-Changed-By: az State-Changed-When: Sat May 25 20:18:55 UTC 2013 State-Changed-Why: Updated by ports/177942 in r319055 http://www.freebsd.org/cgi/query-pr.cgi?pr=177068