Date: Wed, 24 Oct 2007 08:15:36 GMT From: Nate Eldredge <neldredge@ucsd.edu> To: freebsd-gnats-submit@FreeBSD.org Subject: kern/117443: System hang with ataidle Message-ID: <200710240815.l9O8Fa0o098227@www.freebsd.org> Resent-Message-ID: <200710240820.l9O8K1Cb030116@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 117443
>Category: kern
>Synopsis: System hang with ataidle
>Confidential: no
>Severity: non-critical
>Priority: medium
>Responsible: freebsd-bugs
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Wed Oct 24 08:20:01 UTC 2007
>Closed-Date:
>Last-Modified:
>Originator: Nate Eldredge
>Release: 6.2-RELEASE-p7
>Organization:
>Environment:
FreeBSD vulcan.lan 6.2-RELEASE-p7 FreeBSD 6.2-RELEASE-p7 #18: Tue Oct 23 13:50:19 PDT 2007 root@:/usr/obj/usr/src/sys/VULCAN amd64
>Description:
When I use ataidle to put a disk in standby or sleep mode (ataidle -s or -o), trying to access it again hangs the system. I might expect it to hang briefly while the drive spins back up, but it never recovers. Even numlock on the console doesn't work anymore.
ataidle -i doesn't cause a problem. On the other hand it also doesn't seem to spin the disk down.
This is possibly related to kern/117421 since it's a similar symptom on the same hardware.
Output of dmesg in verbose mode:
cam: using minimum scsi_delay (100ms)
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-RELEASE-p7 #13: Mon Oct 22 23:36:32 PDT 2007
nate@vulcan.lan:/usr/obj/usr/src/sys/VULCAN
Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff80734000.
Preloaded elf obj module "/boot/kernel/snd_ich.ko" at 0xffffffff80734198.
Preloaded elf obj module "/boot/kernel/sound.ko" at 0xffffffff80734740.
Calibrating clock(s) ... i8254 clock: 1192963 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 1790360410 Hz
CPU: AMD Opteron(tm) Processor 244 (1790.36-MHz K8-class CPU)
Origin = "AuthenticAMD" Id = 0xf5a Stepping = 10
Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
AMD Features=0xe0500800<SYSCALL,NX,MMX+,LM,3DNow+,3DNow>
L1 2MB data TLB: 8 entries, fully associative
L1 2MB instruction TLB: 8 entries, fully associative
L1 4KB data TLB: 32 entries, fully associative
L1 4KB instruction TLB: 32 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L2 2MB unified TLB: 0 entries, disabled/not present
L2 4KB data TLB: 512 entries, 4-way associative
L2 4KB instruction TLB: 512 entries, 4-way associative
L2 unified cache: 1024 kbytes, 64 bytes/line, 1 lines/tag, 16-way associative
real memory = 1073676288 (1023 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000831000 - 0x000000003e1a7fff, 1033334784 bytes (252279 pages)
avail memory = 1027506176 (979 MB)
mem: <memory>
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
io: <I/O>
nfslock: pseudo-device
cpu0 on motherboard
pci_open(1): mode 1 addr port (0x0cf8) is 0x80010014
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=74541022)
pcib0: <Host to PCI bridge> pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pci0: physical bus=0
found-> vendor=0x1022, dev=0x7454, revid=0x14
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type 3, range 32, base f0000000, size 27, enabled
found-> vendor=0x1022, dev=0x7455, revid=0x14
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0220, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x7460, revid=0x07
bus=0, slot=6, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0117, statreg=0x0230, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x06 (1500 ns), maxlat=0x04 (1000 ns)
found-> vendor=0x1022, dev=0x7468, revid=0x05
bus=0, slot=7, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x000f, statreg=0x0220, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x7469, revid=0x03
bus=0, slot=7, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 0000ffa0, size 4, enabled
found-> vendor=0x1022, dev=0x746a, revid=0x02
bus=0, slot=7, func=2
class=0c-05-00, hdrtype=0x00, mfdev=0
cmdreg=0x0001, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=10
map[10]: type 4, range 32, base 0000c480, size 5, enabled
found-> vendor=0x1022, dev=0x746b, revid=0x05
bus=0, slot=7, func=3
class=06-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x746d, revid=0x03
bus=0, slot=7, func=5
class=04-01-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=9
map[10]: type 4, range 32, base 0000c800, size 8, enabled
map[14]: type 4, range 32, base 0000cc00, size 6, enabled
found-> vendor=0x1022, dev=0x1100, revid=0x00
bus=0, slot=24, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1101, revid=0x00
bus=0, slot=24, func=1
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1102, revid=0x00
bus=0, slot=24, func=2
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1103, revid=0x00
bus=0, slot=24, func=3
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
agp0: <AMD 8151 AGP graphics tunnel> mem 0xf0000000-0xf7ffffff at device 0.0 on pci0
agp0: 1 Miscellaneous Control unit(s) found.
agp0: Aperture Base[0]: 0x00000078
agp0: Reserved 0x8000000 bytes for rid 0x10 type 3 at 0xf0000000
agp0: allocating GATT for aperture of size 128M
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0x7000-0x9fff
pcib1: memory decode 0xff300000-0xff3fffff
pcib1: prefetched decode 0xceb00000-0xeeafffff
pci1: <PCI bus> on pcib1
pci1: physical bus=1
found-> vendor=0x1002, dev=0x5960, revid=0x01
bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0107, statreg=0x02b0, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 3, range 32, base e0000000, size 27, enabled
pcib1: (null) requested memory range 0xe0000000-0xe7ffffff: good
map[14]: type 4, range 32, base 00009000, size 8, enabled
pcib1: (null) requested I/O range 0x9000-0x90ff: in range
map[18]: type 1, range 32, base ff3f0000, size 16, enabled
pcib1: (null) requested memory range 0xff3f0000-0xff3fffff: good
found-> vendor=0x1002, dev=0x5940, revid=0x01
bus=1, slot=0, func=1
class=03-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02b0, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 3, range 32, base d8000000, size 27, enabled
pcib1: (null) requested memory range 0xd8000000-0xdfffffff: good
map[14]: type 1, range 32, base ff3e0000, size 16, enabled
pcib1: (null) requested memory range 0xff3e0000-0xff3effff: good
pci1: <display, VGA> at device 0.0 (no driver attached)
pci1: <display> at device 0.1 (no driver attached)
pcib2: <PCI-PCI bridge> at device 6.0 on pci0
pcib2: secondary bus 2
pcib2: subordinate bus 2
pcib2: I/O decode 0xa000-0xbfff
pcib2: memory decode 0xff400000-0xff5fffff
pcib2: prefetched decode 0xfff00000-0xfffff
pci2: <PCI bus> on pcib2
pci2: physical bus=2
found-> vendor=0x1022, dev=0x7464, revid=0x0b
bus=2, slot=0, func=0
class=0c-03-10, hdrtype=0x00, mfdev=1
cmdreg=0x0117, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns)
intpin=d, irq=10
map[10]: type 1, range 32, base ff5fd000, size 12, enabled
pcib2: (null) requested memory range 0xff5fd000-0xff5fdfff: good
found-> vendor=0x1022, dev=0x7464, revid=0x0b
bus=2, slot=0, func=1
class=0c-03-10, hdrtype=0x00, mfdev=0
cmdreg=0x0117, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns)
intpin=d, irq=10
map[10]: type 1, range 32, base ff5fe000, size 12, enabled
pcib2: (null) requested memory range 0xff5fe000-0xff5fefff: good
found-> vendor=0x8086, dev=0x1076, revid=0x00
bus=2, slot=3, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0117, statreg=0x0230, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
powerspec 2 supports D0 D3 current D0
map[10]: type 1, range 32, base ff5c0000, size 17, enabled
pcib2: (null) requested memory range 0xff5c0000-0xff5dffff: good
map[14]: type 1, range 32, base ff5a0000, size 17, enabled
pcib2: (null) requested memory range 0xff5a0000-0xff5bffff: good
map[18]: type 4, range 32, base 0000a880, size 6, enabled
pcib2: (null) requested I/O range 0xa880-0xa8bf: in range
found-> vendor=0x1095, dev=0x3114, revid=0x02
bus=2, slot=5, func=0
class=01-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0107, statreg=0x02b0, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 0000bc00, size 3, enabled
pcib2: (null) requested I/O range 0xbc00-0xbc07: in range
map[14]: type 4, range 32, base 0000b880, size 2, enabled
pcib2: (null) requested I/O range 0xb880-0xb883: in range
map[18]: type 4, range 32, base 0000b800, size 3, enabled
pcib2: (null) requested I/O range 0xb800-0xb807: in range
map[1c]: type 4, range 32, base 0000b480, size 2, enabled
pcib2: (null) requested I/O range 0xb480-0xb483: in range
map[20]: type 4, range 32, base 0000b400, size 4, enabled
pcib2: (null) requested I/O range 0xb400-0xb40f: in range
map[24]: type 1, range 32, base ff5ffc00, size 10, enabled
pcib2: (null) requested memory range 0xff5ffc00-0xff5fffff: good
found-> vendor=0x1106, dev=0x3044, revid=0x80
bus=2, slot=10, func=0
class=0c-00-10, hdrtype=0x00, mfdev=0
cmdreg=0x0117, statreg=0x0210, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x20 (8000 ns)
intpin=a, irq=9
powerspec 2 supports D0 D2 D3 current D0
map[10]: type 1, range 32, base ff5ff000, size 11, enabled
pcib2: (null) requested memory range 0xff5ff000-0xff5ff7ff: good
map[14]: type 4, range 32, base 0000ac00, size 7, enabled
pcib2: (null) requested I/O range 0xac00-0xac7f: in range
found-> vendor=0x1106, dev=0x3038, revid=0x61
bus=2, slot=11, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0117, statreg=0x0210, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=9
powerspec 2 supports D0 D1 D2 D3 current D0
map[20]: type 4, range 32, base 0000b000, size 5, enabled
pcib2: (null) requested I/O range 0xb000-0xb01f: in range
found-> vendor=0x1106, dev=0x3038, revid=0x61
bus=2, slot=11, func=1
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0117, statreg=0x0210, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=5
powerspec 2 supports D0 D1 D2 D3 current D0
map[20]: type 4, range 32, base 0000b080, size 5, enabled
pcib2: (null) requested I/O range 0xb080-0xb09f: in range
found-> vendor=0x1106, dev=0x3104, revid=0x63
bus=2, slot=11, func=2
class=0c-03-20, hdrtype=0x00, mfdev=1
cmdreg=0x0117, statreg=0x0210, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base ff5ff800, size 8, enabled
pcib2: (null) requested memory range 0xff5ff800-0xff5ff8ff: good
ohci0: <OHCI (generic) USB controller> mem 0xff5fd000-0xff5fdfff irq 10 at device 0.0 on pci2
ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xff5fd000
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1: <OHCI (generic) USB controller> mem 0xff5fe000-0xff5fefff irq 10 at device 0.1 on pci2
ohci1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xff5fe000
ohci1: [GIANT-LOCKED]
usb1: OHCI version 1.0, legacy support
usb1: SMM does not respond, resetting
usb1: <OHCI (generic) USB controller> on ohci1
usb1: USB revision 1.0
uhub1: AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
em0: <Intel(R) PRO/1000 Network Connection Version - 6.2.9> port 0xa880-0xa8bf mem 0xff5c0000-0xff5dffff,0xff5a0000-0xff5bffff irq 5 at device 3.0 on pci2
em0: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xff5c0000
em0: Reserved 0x40 bytes for rid 0x18 type 4 at 0xa880
em0: bpf attached
em0: Ethernet address: 00:e0:81:31:ae:1d
em0: [MPSAFE]
atapci0: <SiI 3114 SATA150 controller> port 0xbc00-0xbc07,0xb880-0xb883,0xb800-0xb807,0xb480-0xb483,0xb400-0xb40f mem 0xff5ffc00-0xff5fffff irq 10 at device 5.0 on pci2
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xb400
atapci0: [MPSAFE]
atapci0: Reserved 0x400 bytes for rid 0x24 type 3 at 0xff5ffc00
ata2: <ATA channel 0> on atapci0
ata2: SATA connect ready time=30ms
ata2: sata_connect devices=0x1<ATA_MASTER>
ata2: [MPSAFE]
ata3: <ATA channel 1> on atapci0
ata3: SATA connect ready time=20ms
ata3: sata_connect devices=0x1<ATA_MASTER>
ata3: [MPSAFE]
ata4: <ATA channel 2> on atapci0
ata4: SATA connect status=00000000
ata4: [MPSAFE]
ata5: <ATA channel 3> on atapci0
ata5: SATA connect status=00000000
ata5: [MPSAFE]
fwohci0: <VIA Fire II (VT6306)> port 0xac00-0xac7f mem 0xff5ff000-0xff5ff7ff irq 9 at device 10.0 on pci2
fwohci0: Reserved 0x800 bytes for rid 0x10 type 3 at 0xff5ff000
fwohci0: [MPSAFE]
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:e0:81:00:00:30:79:00
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
pci2: <serial bus, USB> at device 11.0 (no driver attached)
pci2: <serial bus, USB> at device 11.1 (no driver attached)
ehci0: <VIA VT6202 USB 2.0 controller> mem 0xff5ff800-0xff5ff8ff irq 10 at device 11.2 on pci2
ehci0: Reserved 0x100 bytes for rid 0x10 type 3 at 0xff5ff800
ehci0: [GIANT-LOCKED]
ehci0: Dropped interrupts workaround enabled
usb2: EHCI version 1.0
usb2: wrong number of companions (2 != 0)
usb2: <VIA VT6202 USB 2.0 controller> on ehci0
usb2: USB revision 2.0
uhub2: VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 4 ports with 4 removable, self powered
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <AMD 8111 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 7.1 on pci0
atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0xffa0
ata0: <ATA channel 0> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci1: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=01
ata0: stat0=0x10 err=0x01 lsb=0x14 msb=0xeb
ata0: stat1=0x01 err=0x04 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=10 stat1=01 devices=0x4<ATAPI_MASTER>
ata0: [MPSAFE]
ata1: <ATA channel 1> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci1: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=60 ostat1=70
ata1: stat0=0x20 err=0x20 lsb=0x20 msb=0x20
ata1: stat1=0x30 err=0x30 lsb=0x30 msb=0x30
ata1: reset tp2 stat0=20 stat1=30 devices=0x0
ata1: [MPSAFE]
pci0: <serial bus, SMBus> at device 7.2 (no driver attached)
pci0: <bridge> at device 7.3 (no driver attached)
pcm0: <AMD-8111> port 0xc800-0xc8ff,0xcc00-0xcc3f irq 9 at device 7.5 on pci0
pcm0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xc800
pcm0: Reserved 0x40 bytes for rid 0x14 type 4 at 0xcc00
pcm0: [MPSAFE]
pcm0: <Avance Logic ALC655 AC97 Codec (id = 0x414c4760)>
pcm0: Codec features 5 bit master volume, no 3D Stereo Enhancement
pcm0: Primary codec extended features reserved 1, center DAC, surround DAC, LFE DAC, reserved 5
pcm0: ac97 codec dac ready count: 0
pcm0: sndbuf_setmap 3dadf000, 4000; 0xffffffffa55e7000 -> 3dadf000
pcm0: sndbuf_setmap 3dadb000, 4000; 0xffffffffa55eb000 -> 3dadb000
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROMs> at iomem 0xc0000-0xccfff,0xcd000-0xd17ff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
psm0: current command byte:0065
psm0: failed to reset the aux device.
fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0
ppc0: cannot reserve I/O port range
ppc0: <Parallel port> failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: irq maps: 0 0 0 0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0 0 0 0
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sio2: not probed (disabled)
sio3: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
isa_probe_children: probing PnP devices
uhub3: vendor 0x0557 product 0x7000, class 9/0, rev 1.10/1.00, addr 2
uhub3: 4 ports with 4 removable, self powered
ukbd0: vendor 0x1241 USB Keyboard, rev 1.10/2.80, addr 3, iclass 3/1
kbd: new array size 4
kbd1 at ukbd0
kbd1: ukbd0, generic (0), config:0x0, flags:0x1d0000
uhid0: vendor 0x1241 USB Keyboard, rev 1.10/2.80, addr 3, iclass 3/1
ums0: Cypress Sem PS2/USB Browser Combo Mouse, rev 1.00/0.00, addr 4, iclass 3/1
ums0: 5 buttons and Z dir.
Device configuration finished.
linprocfs registered
procfs registered
Timecounter "TSC" frequency 1790360410 Hz quality 800
Timecounters tick every 1.000 msec
Linux ELF exec handler installed
DUMMYNET with IPv6 initialized (040826)
lo0: bpf attached
ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding disabled, default to deny, logging unlimited
em0: Link is up 100 Mbps Full Duplex
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA66 cable=40 wire
acd0: setting PIO4 on 8111 chip
acd0: setting UDMA66 on 8111 chip
acd0: <DVDRW IDE 16X/VER A07J> DVDR drive at ata0 as master
acd0: read 172KB/s (8251KB/s) write 8269KB/s (8251KB/s), 2048KB buffer, UDMA66
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet
acd0: Writes: CDR, CDRW, DVDR, test write, burnproof
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
(probe0:ata0:0:0:0): error 22
(probe0:ata0:0:0:0): Unretryable Error
ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ad4: 239372MB <Maxtor 6B250S0 BANC1E00> at ata2-master SATA150
ad4: 490234752 sectors [486344C/16H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad4
ata3-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ad6: 476940MB <MAXTOR STM3500630AS 3.AAE> at ata3-master SATA150
ad6: 976773168 sectors [969021C/16H/63S] 16 sectors/interrupt 1 depth queue
pcm0: measured ac97 link rate at 48175 Hz, will use 48000 Hz
(probe7:ata0:0:0:0): error 6
(probe7:ata0:0:0:0): Unretryable Error
GEOM: new disk ad6
(probe7:ata0:0:0:0): error 22
(probe7:ata0:0:0:0): Unretryable Error
(probe0:sbp0:0:0:0): error 22
(probe0:sbp0:0:0:0): Unretryable Error
(probe1:sbp0:0:1:0): error 22
(probe1:sbp0:0:1:0): Unretryable Error
(probe2:sbp0:0:2:0): error 22
(probe2:sbp0:0:2:0): Unretryable Error
(probe3:sbp0:0:3:0): error 22
(probe3:sbp0:0:3:0): Unretryable Error
(probe4:sbp0:0:4:0): error 22
(probe4:sbp0:0:4:0): Unretryable Error
(probe5:sbp0:0:5:0): error 22
(probe5:sbp0:0:5:0): Unretryable Error
(probe6:sbp0:0:6:0): error 22
(probe6:sbp0:0:6:0): Unretryable Error
pass0 at ata0 bus 0 target 0 lun 0
pass0: <DVDRW IDE 16X A07J> Removable CD-ROM SCSI-0 device
pass0: 66.000MB/s transfers
(cd0:ata0:0:0:0): error 6
(cd0:ata0:0:0:0): Unretryable Error
cd0 at ata0 bus 0 target 0 lun 0
cd0: <DVDRW IDE 16X A07J> Removable CD-ROM SCSI-0 device
cd0: 66.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
GEOM: new disk cd0
(cd0:ata0:0:0:0): error 6
(cd0:ata0:0:0:0): Unretryable Error
(cd0:ata0:0:0:0): error 6
(cd0:ata0:0:0:0): Unretryable Error
(cd0:ata0:0:0:0): error 6
(cd0:ata0:0:0:0): Unretryable Error
Trying to mount root from ufs:/dev/ad6s2a
start_init: trying /sbin/init
em0: Link is Down
tun0: bpf attached
em0: Link is up 100 Mbps Full Duplex
em0: link state changed to UP
Output of pciconf -l:
agp0@pci0:0:0: class=0x060000 card=0x74541022 chip=0x74541022 rev=0x14 hdr=0x00
pcib1@pci0:1:0: class=0x060400 card=0x00000000 chip=0x74551022 rev=0x14 hdr=0x01
pcib2@pci0:6:0: class=0x060400 card=0x000000c0 chip=0x74601022 rev=0x07 hdr=0x01
isab0@pci0:7:0: class=0x060100 card=0x74681022 chip=0x74681022 rev=0x05 hdr=0x00
atapci1@pci0:7:1: class=0x01018a card=0x74691022 chip=0x74691022 rev=0x03 hdr=0x00
none0@pci0:7:2: class=0x0c0500 card=0x746a1022 chip=0x746a1022 rev=0x02 hdr=0x00
none1@pci0:7:3: class=0x068000 card=0x746b1022 chip=0x746b1022 rev=0x05 hdr=0x00
pcm0@pci0:7:5: class=0x040100 card=0x746d10f1 chip=0x746d1022 rev=0x03 hdr=0x00
hostb0@pci0:24:0: class=0x060000 card=0x00000000 chip=0x11001022 rev=0x00 hdr=0x00
hostb1@pci0:24:1: class=0x060000 card=0x00000000 chip=0x11011022 rev=0x00 hdr=0x00
hostb2@pci0:24:2: class=0x060000 card=0x00000000 chip=0x11021022 rev=0x00 hdr=0x00
hostb3@pci0:24:3: class=0x060000 card=0x00000000 chip=0x11031022 rev=0x00 hdr=0x00
drm0@pci1:0:0: class=0x030000 card=0x01401092 chip=0x59601002 rev=0x01 hdr=0x00
none2@pci1:0:1: class=0x038000 card=0x01411092 chip=0x59401002 rev=0x01 hdr=0x00
ohci0@pci2:0:0: class=0x0c0310 card=0x74641022 chip=0x74641022 rev=0x0b hdr=0x00
ohci1@pci2:0:1: class=0x0c0310 card=0x74641022 chip=0x74641022 rev=0x0b hdr=0x00
em0@pci2:3:0: class=0x020000 card=0x11768086 chip=0x10768086 rev=0x00 hdr=0x00
atapci0@pci2:5:0: class=0x018000 card=0x31141095 chip=0x31141095 rev=0x02 hdr=0x00
fwohci0@pci2:10:0: class=0x0c0010 card=0x304410f1 chip=0x30441106 rev=0x80 hdr=0x00
none3@pci2:11:0: class=0x0c0300 card=0x30381106 chip=0x30381106 rev=0x61 hdr=0x00
none4@pci2:11:1: class=0x0c0300 card=0x30381106 chip=0x30381106 rev=0x61 hdr=0x00
ehci0@pci2:11:2: class=0x0c0320 card=0x31041106 chip=0x31041106 rev=0x63 hdr=0x00
>How-To-Repeat:
portupgrade -N ataidle
ataidle -s 2 0
dd if=/dev/ad4 of=/dev/null count=1
>Fix:
Nope.
>Release-Note:
>Audit-Trail:
>Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200710240815.l9O8Fa0o098227>