Date: Sun, 14 Oct 2001 10:47:00 -0700 From: Jeramey Crawford <flyn@antihe.ro> To: freebsd-questions@freebsd.org Subject: Troubles with cdrtools on FreeBSD 4.4 Message-ID: <20011014104700.D15420@antihe.ro>
next in thread | raw e-mail | index | archive | help
Hello, I'm having some troubles getting my SCSI CD-RW drive to work on FreeBSD 4.4-RELEASE and I was hoping someone might know how to shoot my trouble. I can mount CD-ROM filesystems alright, but cdrecord just spits out an error message. Various diagnostic output is included below. The system I am running is a dual PIII Iwill DBL100 mainboard with an onboard Adaptec aic7890 SCSI controller. Thanks in advance for any help. Jeramey -- cdrecord output -- zander# cdrecord -scanbus Cdrecord 1.10 (i386-unknown-freebsd4.4) Copyright (C) 1995-2001 Jörg Schilling cdrecord: Operation not permitted. Error opening /dev/pass0 Cam error 'cam_real_open_device: couldn't open passthr. Cannot open SCSI driver. cdrecord: For possible targets try 'cdrecord -scanbus'. Make sure you are root. -- dmesg output -- Copyright (c) 1992-2001 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.4-RELEASE #0: Sun Oct 14 09:24:39 PDT 2001 flyn@zander.antihe.ro:/usr/src/sys/compile/ZANDER Timecounter "i8254" frequency 1193182 Hz CPU: Pentium III/Pentium III Xeon/Celeron (551.25-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x673 Stepping = 3 Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> real memory = 402587648 (393152K bytes) config> di sn0 config> di lnc0 config> di ie0 config> di fe0 config> di ed0 config> di cs0 config> di bt0 No such device: bt0 Invalid command or syntax. Type `?' for help. config> di aic0 No such device: aic0 Invalid command or syntax. Type `?' for help. config> di aha0 No such device: aha0 Invalid command or syntax. Type `?' for help. config> di adv0 No such device: adv0 Invalid command or syntax. Type `?' for help. config> q avail memory = 387653632 (378568K bytes) Programming 24 pins in IOAPIC #0 IOAPIC #0 intpin 2 -> irq 0 IOAPIC #0 intpin 17 -> irq 11 IOAPIC #0 intpin 18 -> irq 3 IOAPIC #0 intpin 19 -> irq 12 FreeBSD/SMP: Multiprocessor motherboard cpu0 (BSP): apic id: 0, version: 0x00040011, at 0xfee00000 cpu1 (AP): apic id: 1, version: 0x00040011, at 0xfee00000 io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec00000 Preloaded elf kernel "kernel" at 0xc0402000. Preloaded userconfig_script "/boot/kernel.conf" at 0xc040209c. Pentium Pro MTRR support enabled md0: Malloc disk Using $PIR table, 7 entries at 0xc00fd800 npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 ATA33 controller> port 0xf000-0xf00f at device 7.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xd000-0xd01f irq 12 at device 7.2 on pci0 usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered Timecounter "PIIX" frequency 3579545 Hz chip1: <Intel 82371AB Power management controller> port 0x5000-0x500f at device 7.3 on pci0 pci0: <3Dfx Voodoo 3 graphics accelerator> at 15.0 dc0: <82c169 PNIC 10/100BaseTX> port 0xd800-0xd8ff mem 0xe1001000-0xe10010ff irq 11 at device 16.0 on pci0 dc0: Ethernet address: 00:a0:cc:5d:00:55 miibus0: <MII bus> on dc0 ukphy0: <Generic IEEE 802.3u media interface> on miibus0 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto pci0: <unknown card> (vendor=0x1274, dev=0x5880) at 18.0 irq 3 ahc0: <Adaptec aic7890/91 Ultra2 SCSI adapter> port 0xe000-0xe0ff mem 0xe1000000-0xe1000fff irq 12 at device 20.0 on pci0 aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/255 SCBs orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xef000-0xeffff on isa0 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: configured irq 3 not in bitmap of probed irqs 0 ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/16 bytes threshold plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 APIC_IO: Testing 8254 interrupt delivery APIC_IO: routing 8254 via IOAPIC #0 intpin 2 SMP: AP CPU #1 Launched! ad2: 39083MB <Maxtor 34098H4> [79408/16/63] at ata1-master UDMA33 Waiting 15 seconds for SCSI devices to settle Mounting root from ufs:/dev/ad2s1a cd0 at ahc0 bus 0 target 2 lun 0 cd0: <YAMAHA CRW8424S 1.0g> Removable CD-ROM SCSI-2 device cd0: 20.000MB/s transfers (20.000MHz, offset 15) cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed cd9660: RockRidge Extension -- Kernel configuration (/usr/src/sys/i386/conf/ZANDER) -- machine i386 cpu I586_CPU cpu I686_CPU ident ZANDER maxusers 32 #makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols options MATH_EMULATE #Support for x87 emulation options INET #InterNETworking options INET6 #IPv6 communications protocols options FFS #Berkeley Fast Filesystem options FFS_ROOT #FFS usable as root device [keep this!] options SOFTUPDATES #Enable FFS soft updates support options MFS #Memory Filesystem options MD_ROOT #MD is a potential root device options NFS #Network Filesystem options NFS_ROOT #NFS usable as root device, NFS required options MSDOSFS #MSDOS Filesystem options CD9660 #ISO 9660 Filesystem options CD9660_ROOT #CD-ROM usable as root, CD9660 required options PROCFS #Process filesystem options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=15000 #Delay (in ms) before probing SCSI options UCONSOLE #Allow users to grab the console options USERCONFIG #boot -c editor options VISUAL_USERCONFIG #visual boot -c editor options KTRACE #ktrace(1) support options SYSVSHM #SYSV-style shared memory options SYSVMSG #SYSV-style message queues options SYSVSEM #SYSV-style semaphores options P1003_1B #Posix P1003_1B real-time extensions options _KPOSIX_PRIORITY_SCHEDULING options ICMP_BANDLIM #Rate limit bad replies options KBD_INSTALL_CDEV # install a CDEV entry in /dev # To make an SMP kernel, the next two are needed options SMP # Symmetric MultiProcessor Kernel options APIC_IO # Symmetric (APIC) I/O device isa device eisa device pci # Floppy drives device fdc0 at isa? port IO_FD1 irq 6 drq 2 device fd0 at fdc0 drive 0 device fd1 at fdc0 drive 1 # ATA and ATAPI devices device ata0 at isa? port IO_WD1 irq 14 device ata1 at isa? port IO_WD2 irq 15 device ata device atadisk # ATA disk drives device atapicd # ATAPI CDROM drives device atapifd # ATAPI floppy drives device atapist # ATAPI tape drives options ATA_STATIC_ID #Static device numbering # SCSI Controllers device ahc # AHA2940 and onboard AIC7xxx devices # SCSI peripherals device scbus # SCSI bus (required) device da # Direct Access (disks) device sa # Sequential Access (tape etc) device cd # CD device pass # Passthrough device (direct SCSI access) # atkbdc0 controls both the keyboard and the PS/2 mouse device atkbdc0 at isa? port IO_KBD device atkbd0 at atkbdc? irq 1 flags 0x1 device psm0 at atkbdc? irq 12 device vga0 at isa? # splash screen/screen saver pseudo-device splash # syscons is the default console driver, resembling an SCO console device sc0 at isa? flags 0x100 # Floating point support - do not disable. device npx0 at nexus? port IO_NPX irq 13 # Power management support (see LINT for more options) device apm0 at nexus? disable flags 0x20 # Advanced Power Management # Serial (COM) ports device sio0 at isa? port IO_COM1 flags 0x10 irq 4 device sio1 at isa? port IO_COM2 irq 3 device sio2 at isa? disable port IO_COM3 irq 5 device sio3 at isa? disable port IO_COM4 irq 9 # Parallel port device ppc0 at isa? irq 7 device ppbus # Parallel port bus (required) device lpt # Printer device plip # TCP/IP over parallel device ppi # Parallel port interface device #device vpo # Requires scbus and da # PCI Ethernet NICs. device de # DEC/Intel DC21x4x (``Tulip'') device txp # 3Com 3cR990 (``Typhoon'') device vx # 3Com 3c590, 3c595 (``Vortex'') # PCI Ethernet NICs that use the common MII bus controller code. # NOTE: Be sure to keep the 'device miibus' line in order to use these NICs! device miibus # MII bus support device dc # DEC/Intel 21143 and various workalikes device fxp # Intel EtherExpress PRO/100B (82557, 82558) device pcn # AMD Am79C97x PCI 10/100 NICs device rl # RealTek 8129/8139 device sf # Adaptec AIC-6915 (``Starfire'') device sis # Silicon Integrated Systems SiS 900/SiS 7016 device ste # Sundance ST201 (D-Link DFE-550TX) device tl # Texas Instruments ThunderLAN device tx # SMC EtherPower II (83c170 ``EPIC'') device vr # VIA Rhine, Rhine II device wb # Winbond W89C840F device wx # Intel Gigabit Ethernet Card (``Wiseman'') device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'') # ISA Ethernet NICs. device ed0 at isa? port 0x280 irq 10 iomem 0xd8000 device ex device ep device fe0 at isa? port 0x300 device xe device awi device wi device an # The probe order of these is presently determined by i386/isa/isa_compat.c. device ie0 at isa? port 0x300 irq 10 iomem 0xd0000 #device le0 at isa? port 0x300 irq 5 iomem 0xd0000 device lnc0 at isa? port 0x280 irq 10 drq 0 device cs0 at isa? port 0x300 device sn0 at isa? port 0x300 irq 10 # Pseudo devices - the number indicates how many units to allocate. pseudo-device loop # Network loopback pseudo-device ether # Ethernet support pseudo-device sl 1 # Kernel SLIP pseudo-device ppp 1 # Kernel PPP pseudo-device tun # Packet tunnel. pseudo-device pty # Pseudo-ttys (telnet etc) pseudo-device md # Memory "disks" pseudo-device gif # IPv6 and IPv4 tunneling pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation) pseudo-device bpf #Berkeley packet filter # USB support device uhci # UHCI PCI->USB interface device ohci # OHCI PCI->USB interface device usb # USB Bus (required) device ugen # Generic device uhid # "Human Interface Devices" device ukbd # Keyboard device ulpt # Printer device umass # Disks/Mass storage - Requires scbus and da device ums # Mouse device uscanner # Scanners To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20011014104700.D15420>