Date: Wed, 11 Aug 1999 17:17:09 -0600 (MDT) From: "Kenneth D. Merry" <ken@kdm.org> To: stevec@delanet.com (Stephen C. Comoletti) Cc: freebsd-scsi@FreeBSD.ORG Subject: Re: Adaptec 2944uw on 3.2r Message-ID: <199908112317.RAA50307@panzer.kdm.org> In-Reply-To: <37B20364.A20AF9C5@delanet.com> from "Stephen C. Comoletti" at "Aug 11, 1999 07:12:36 pm"
next in thread | previous in thread | raw e-mail | index | archive | help
Stephen C. Comoletti wrote... > I'm having trouble with 3.2r detecting the adaptec aha-2944uw > differential controllers... Has anyone used this controller on 3.2? only > posts I saw were on 4.0 current.. My hardware is a DEC 300i+ with a > Qlogic 1040b on the mb (with the boot drive), and the adaptec 2944uw for > an external metastor raid array which has a symbios differential raid > controller and 4 18gig seagate hvd drives. The card is detected by win98 > (had to install it on an ide to update the bios on the host)..so I know > the card is not bad. And from the adaptec bios util I can see the > drives. I have ahc0 enabled in the kernel..However I'm not very familiar > with running multiple scsi controllers in the same pc. Any other options > I need to enable in the kernel for this or is it a matter of using 4.0 > current? > > Thanks and please cc: me as I'm not on the list... Can you try a newer FreeBSD-stable snapshot? There was a fix that went into the tree in late May, after 3.2 went out, that might fix your problem. There are up-to-date snapshots here: ftp://current.FreeBSD.ORG/pub/FreeBSD/snapshots/i386 You can probably just download the boot disk and see if it detects your 2944. If it does, I'd suggest installing a snapshot instead of 3.2. Ken -- Kenneth Merry ken@kdm.org To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-scsi" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199908112317.RAA50307>