Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 28 Aug 1995 18:11:14 -0700
From:      jmacd@uclink.berkeley.edu (Joshua Peck Macdonald)
To:        freebsd-questions@freefall.FreeBSD.org
Subject:   Gateway/Zoltrix 14.4 problem
Message-ID:  <199508290111.SAA14607@uclink.berkeley.edu>

next in thread | raw e-mail | index | archive | help

I have a problem with a friends computer.  The system is running
the 950726 2.1 snapshot.  It is a Gateway 2000 P5-60 running
AMI 1.00.10AF2T bios.  Both DOS/Windows and OS/2 recognize and
operate the Zoltrix 14.4 internal modem just fine.  It is jumpered
for COM1, but we have tried it on COM2 also.  The on-board COM1
has been disabled.  When FreeBSD boots, we get

sio0 not found at 0x3f8
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A

The address of the card is right, according to DOS.  I have included
the kernel config file below.  If anyone can help, it would be
appreciated.

#
# GENERIC -- Generic machine with WD/AHx/NCR/BTx family disks
#
#       $Id: GENERIC,v 1.46 1995/06/11 19:31:11 rgrimes Exp $
#

machine         "i386"
cpu             "I386_CPU"
cpu             "I486_CPU"
cpu             "I586_CPU"
ident           BELOVED
maxusers        10

options         MATH_EMULATE            #Support for x87 emulation
options         INET                    #InterNETworking
options         FFS                     #Berkeley Fast Filesystem
#options                NFS                     #Network Filesystem
options         MSDOSFS                 #MSDOS Filesystem
#options                "CD9660"                #ISO 9660 Filesystem
options         PROCFS                  #Process filesystem
options         "COMPAT_43"             #Compatible with BSD 4.3
#options                "SCSI_DELAY=15"         #Be pessimistic about Joe SCSI d
evice
options         BOUNCE_BUFFERS          #include support for DMA bounce buffers
options         UCONSOLE                #Allow users to grab the console

options         COMPAT_LINUX
options         SYSVSHM
options         SYSVSEM
options         SYSVMSG

config          kernel  root on wd0

controller      isa0
controller      pci0

controller      fdc0    at isa? port "IO_FD1" bio irq 6 drq 2 vector fdintr
disk            fd0     at fdc0 drive 0
#disk           fd1     at fdc0 drive 1
#tape           ft0     at fdc0 drive 2

controller      wdc0    at isa? port "IO_WD1" bio irq 14 vector wdintr
disk            wd0     at wdc0 drive 0
#disk           wd1     at wdc0 drive 1

#controller     wdc1    at isa? port "IO_WD2" bio irq 15 vector wdintr
#disk           wd2     at wdc1 drive 0
#disk           wd3     at wdc1 drive 1

#controller     ncr0
#controller     ahc0

#controller     bt0     at isa? port "IO_BT0" bio irq ? vector btintr
#controller     uha0    at isa? port "IO_UHA0" bio irq ? drq 5 vector uhaintr
#controller     ahc1    at isa? bio irq ? vector ahcintr
#controller     ahb0    at isa? bio irq ? vector ahbintr
#controller     aha0    at isa? port "IO_AHA0" bio irq ? drq 5 vector ahaintr
#controller     aic0    at isa? port 0x340 bio irq 11 vector aicintr
#controller     nca0    at isa? port 0x1f88 bio irq 10 vector ncaintr
#controller     nca1    at isa? port 0x350 bio irq 5 vector ncaintr
#controller     sea0    at isa? bio irq 5 iomem 0xc8000 iosiz 0x2000 vector seai
ntr

device          psm0    at isa? port "IO_KBD" conflicts tty irq 12 vector psmint
r

#controller     scbus0

#device         sd0
#device         st0

#device         cd0     #Only need one of these, the code dynamically grows

#device         wt0     at isa? port 0x300 bio irq 5 drq 1 vector wtintr
#device         mcd0    at isa? port 0x300 bio irq 10 vector mcdintr
#device         mcd1    at isa? port 0x340 bio irq 11 vector mcdintr

#controller     matcd0  at isa? port ? bio

#device         scd0    at isa? port 0x230 bio

# syscons is the default console driver, resembling an SCO console
device          sc0     at isa? port "IO_KBD" tty irq 1 vector scintr
# Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver
#device         vt0     at isa? port "IO_KBD" tty irq 1 vector pcrint
#options                "PCVT_FREEBSD=210"      # pcvt running on FreeBSD 2.1
#options                XSERVER                 # include code for XFree86

device          npx0    at isa? port "IO_NPX" irq 13 vector npxintr

device          sio0    at isa? port "IO_COM1" tty irq 4 vector siointr
device          sio1    at isa? port "IO_COM2" tty irq 3 vector siointr
#device         sio2    at isa? port "IO_COM3" tty irq 5 vector siointr
#device         sio3    at isa? port "IO_COM4" tty irq 9 vector siointr

device          lpt0    at isa? port? tty irq 7 vector lptintr
#device         lpt1    at isa? port? tty
#device         lpt2    at isa? port? tty

# Order is important here due to intrusive probes, do *not* alphabetize
# this list of network interfaces until the probes have been fixed.
# Right now it appears that the ie0 must be probed before ep0. See
# revision 1.20 of this file.
#device de0
#device ed0 at isa? port 0x280 net irq  5 iomem 0xd8000 vector edintr
#device ed1 at isa? port 0x300 net irq  5 iomem 0xd8000 vector edintr
#device ie0 at isa? port 0x360 net irq  7 iomem 0xd0000 vector ieintr
#device ep0 at isa? port 0x300 net irq 10 vector epintr
#device ix0 at isa? port 0x300 net irq 10 iomem 0xd0000 iosiz 32768 vector ixint
r
#device le0 at isa? port 0x300 net irq 5 iomem 0xd0000 vector le_intr
#device lnc0 at isa? port 0x280 net irq 10 drq 0 vector lncintr
#device lnc1 at isa? port 0x300 net irq 10 drq 0 vector lncintr
#device ze0 at isa? port 0x300 net irq 5 iomem 0xd8000 vector zeintr
#device zp0 at isa? port 0x300 net irq 10 iomem 0xd8000 vector zpintr

pseudo-device   loop
pseudo-device   ether
pseudo-device   log
pseudo-device   sl      1
# ijppp uses tun instead of ppp device
#pseudo-device  ppp     1
pseudo-device   tun     1
pseudo-device   pty     16
pseudo-device   gzip            # Exec gzipped a.out's



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199508290111.SAA14607>