Date: Mon, 17 Dec 2012 09:52:32 +1000 From: Gary Newcombe <gary.newcombe@gmail.com> To: freebsd-questions@freebsd.org Subject: mfiutil stating battery not present after installing battery Message-ID: <20121217095232.9aa8ca5dd663f364cc3ba5c9@gmail.com>
next in thread | raw e-mail | index | archive | help
I have a ServeRAID M5014 SAS/SATA Controller in a server and have just
put an M5000 Series Battery directly onto the card.
I was just expecting the battery to charge and be able to see it, but
no joy after a few days and a restart. As far as I am aware, the
battery should just be detected. What am I missing here?
The server is 8.3-RELEASE and I get:
# mfiutil show adapter
mfi0 Adapter:
Product Name: ServeRAID M5014 SAS/SATA Controller
Serial Number: SV93301447
Firmware: 12.0.1-0097
RAID Levels: JBOD, RAID0, RAID1, RAID5, RAID10, RAID50
Battery Backup: not present
NVRAM: 32K
Onboard Memory: 256M
Minimum Stripe: 8k
Maximum Stripe: 1M
# mfiutil show battery
mfi0: No battery present
# dmesg | grep mfi
mfi0: <LSI MegaSAS Gen2> port 0x1000-0x10ff mem 0x97940000-0x97943fff,0x97900000-0x9793ffff irq 16 at device 0.0 on pci1
mfi0: Megaraid SAS driver Ver 3.00
mfi0: 21863 (408970429s/0x0020/info) - Shutdown command received from host
mfi0: 21864 (boot + 3s/0x0020/info) - Firmware initialization started (PCI ID 0079/1000/03c7/1014)
mfi0: 21865 (boot + 3s/0x0020/info) - Firmware version 2.0.33-0901
mfi0: 21866 (boot + 65s/0x0008/WARN) - Battery Not Present
mfi0: 21867 (boot + 65s/0x0020/info) - Board Revision
mfi0: 21868 (boot + 83s/0x0002/info) - Inserted: PD 08(e0xff/s8)
mfi0: 21869 (boot + 83s/0x0002/info) - Inserted: PD 08(e0xff/s8) Info: enclPd=ffff, scsiType=0, portMap=00, sasAddr=5000cca00a66b335,0000000000000000
mfi0: 21870 (boot + 83s/0x0002/info) - PD 08(e0xff/s8) FRU is 42D0628
mfi0: 21871 (boot + 83s/0x0002/info) - Inserted: PD 09(e0xff/s9)
mfi0: 21872 (boot + 83s/0x0002/info) - Inserted: PD 09(e0xff/s9) Info: enclPd=ffff, scsiType=0, portMap=02, sasAddr=5000cca00a6993b1,0000000000000000
mfi0: 21873 (boot + 83s/0x0002/info) - PD 09(e0xff/s9) FRU is 42D0628
mfi0: 21874 (boot + 83s/0x0002/info) - Inserted: PD 0a(e0xff/s10)
mfi0: 21875 (boot + 83s/0x0002/info) - Inserted: PD 0a(e0xff/s10) Info: enclPd=ffff, scsiType=0, portMap=01, sasAddr=5000cca00a645a65,0000000000000000
mfi0: 21876 (boot + 83s/0x0002/info) - PD 0a(e0xff/s10) FRU is 42D0628
mfi0: 21877 (boot + 84s/0x0008/WARN) - BBU disabled; changing WB virtual disks to WT
mfi0: [ITHREAD]
mfi0: 21878 (408970578s/0x0020/info) - Time established as 12/16/12 10:56:18; (145 seconds since power on)
mfid0: <MFI Logical Disk> on mfi0
mfid0: 570296MB (1167966208 sectors) RAID volume '' is optimal
Has anyone seen this sort of behaviour before or have any pointers?
Thanks,
Gary.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20121217095232.9aa8ca5dd663f364cc3ba5c9>