Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 28 Jan 2004 07:36:35 -0800
From:      "Anthony Discolo" <avdiscolo@hotmail.com>
To:        abozan01@ccsf.edu
Cc:        freebsd-questions@freebsd.org
Subject:   Re: FreeBSD 5.1 support for Dell Integrated audio?
Message-ID:  <Sea2-F39IiC08B4wQyk0002e504@hotmail.com>

next in thread | raw e-mail | index | archive | help
I have tried snd_ich_load="YES" in my \boot\loader.conf, but still no sound.

I've included my config file and dmesg output below.  Thanks.

#
# GENERIC -- Generic kernel configuration file for FreeBSD/i386
#
# For more information on this file, please read the handbook section on
# Kernel Configuration Files:
#
#    
http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html
#
# The handbook is also available locally in /usr/share/doc/handbook
# if you've installed the doc distribution, otherwise always see the
# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
# latest information.
#
# An exhaustive list of options and more detailed explanations of the
# device lines is also present in the ../../conf/NOTES and NOTES files.
# If you are in doubt as to the purpose or necessity of a line, check first
# in NOTES.
#
# $FreeBSD: src/sys/i386/conf/GENERIC,v 1.384.2.2 2003/05/31 15:18:41 scottl 
Exp $

machine         i386
#cpu            I486_CPU
#cpu            I586_CPU
cpu             I686_CPU
ident           ADISCOLO4

#To statically compile in device wiring instead of /boot/device.hints
#hints          "GENERIC.hints"         #Default places to look for devices.

#makeoptions    DEBUG=-g                #Build kernel with gdb(1) debug 
symbols

options         SCHED_4BSD              #4BSD scheduler
options         INET                    #InterNETworking
options         INET6                   #IPv6 communications protocols
options         FFS                     #Berkeley Fast Filesystem
options         SOFTUPDATES             #Enable FFS soft updates support
options         UFS_ACL                 #Support for access control lists
options         UFS_DIRHASH             #Improve performance on big 
directories
options         MD_ROOT                 #MD is a potential root device
options         NFSCLIENT               #Network Filesystem Client
options         NFSSERVER               #Network Filesystem Server
options         NFS_ROOT                #NFS usable as root device, requires 
NFSCLIENT
options         MSDOSFS                 #MSDOS Filesystem
options         CD9660                  #ISO 9660 Filesystem
options         PROCFS                  #Process filesystem (requires 
PSEUDOFS)
options         PSEUDOFS                #Pseudo-filesystem framework
options         COMPAT_43               #Compatible with BSD 4.3 [KEEP 
THIS!]
options         COMPAT_FREEBSD4         #Compatible with FreeBSD4
options         SCSI_DELAY=15000        #Delay (in ms) before probing SCSI
options         KTRACE                  #ktrace(1) support
options         SYSVSHM                 #SYSV-style shared memory
options         SYSVMSG                 #SYSV-style message queues
options         SYSVSEM                 #SYSV-style semaphores
options         _KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B real-time 
extensions
options         KBD_INSTALL_CDEV        # install a CDEV entry in /dev
options         AHC_REG_PRETTY_PRINT    # Print register bitfields in debug
                                        # output.  Adds ~128k to driver.
options         AHD_REG_PRETTY_PRINT    # Print register bitfields in debug
                                        # output.  Adds ~215k to driver.

# SMB support
options         NETSMB                  # SMB/CIFS requester
options         NETSMBCRYPTO            # encrypted password support for SMB
options         LIBMCHAIN               # mbuf management library
options         LIBICONV
options         SMBFS

# Debugging for use in -current
#options        DDB                     #Enable the kernel debugger
#options        INVARIANTS              #Enable calls of extra sanity 
checking
options         INVARIANT_SUPPORT       #Extra sanity checks of internal 
structures, required by INVARIANTS
#options        WITNESS                 #Enable checks to detect deadlocks 
and cycles
#options        WITNESS_SKIPSPIN        #Don't run witness on spinlocks for 
speed

# To make an SMP kernel, the next two are needed
#options        SMP                     # Symmetric MultiProcessor Kernel
#options        APIC_IO                 # Symmetric (APIC) I/O

device          isa
device          eisa
device          pci

# Floppy drives
device          fdc

# ATA and ATAPI devices
device          ata
device          atadisk                 # ATA disk drives
device          atapicd                 # ATAPI CDROM drives
device          atapifd                 # ATAPI floppy drives
device          atapist                 # ATAPI tape drives
options         ATA_STATIC_ID           #Static device numbering

# SCSI Controllers
#device         ahb             # EISA AHA1742 family
#device         ahc             # AHA2940 and onboard AIC7xxx devices
#device         ahd             # AHA39320/29320 and onboard AIC79xx devices
#device         amd             # AMD 53C974 (Tekram DC-390(T))
#device         isp             # Qlogic family
#device         mpt             # LSI-Logic MPT-Fusion
#device         ncr             # NCR/Symbios Logic
#device         sym             # NCR/Symbios Logic (newer chipsets + those 
of `ncr')
#device         trm             # Tekram DC395U/UW/F DC315U adapters

#device         adv             # Advansys SCSI adapters
#device         adw             # Advansys wide SCSI adapters
#device         aha             # Adaptec 154x SCSI adapters
#device         aic             # Adaptec 15[012]x SCSI adapters, 
AIC-6[23]60.
#device         bt              # Buslogic/Mylex MultiMaster SCSI adapters

#device         ncv             # NCR 53C500
#device         nsp             # Workbit Ninja SCSI-3
#device         stg             # TMC 18C30/18C50

# RAID controllers interfaced to the SCSI subsystem
#device         asr             # DPT SmartRAID V, VI and Adaptec SCSI RAID
#device         ciss            # Compaq Smart RAID 5*
#device         dpt             # DPT Smartcache III, IV - See NOTES for 
options!
#device         iir             # Intel Integrated RAID
#device         mly             # Mylex AcceleRAID/eXtremeRAID

# SCSI peripherals
#device         scbus           # SCSI bus (required)
#device         ch              # SCSI media changers
#device         da              # Direct Access (disks)
#device         sa              # Sequential Access (tape etc)
#device         cd              # CD
#device         pass            # Passthrough device (direct SCSI access)
#device         ses             # SCSI Environmental Services (and SAF-TE)

# RAID controllers
#device         aac             # Adaptec FSA RAID
#device         aacp            # SCSI passthrough for aac (requires CAM)
#device         amr             # AMI MegaRAID
#device         ida             # Compaq Smart RAID
#device         ips             # IBM (Adaptec) ServeRAID
#device         mlx             # Mylex DAC960 family
#device         pst             # Promise Supertrak SX6000
#device         twe             # 3ware ATA RAID

# atkbdc0 controls both the keyboard and the PS/2 mouse
device          atkbdc          # AT keyboard controller
device          atkbd           # AT keyboard
device          psm             # PS/2 mouse

device          vga             # VGA video card driver

device          splash          # Splash screen and screen saver support

# syscons is the default console driver, resembling an SCO console
device          sc

# Enable this for the pcvt (VT220 compatible) console driver
#device         vt
#options        XSERVER                 # support for X server on a vt 
console
#options        FAT_CURSOR              # start with block cursor

device          agp             # support several AGP chipsets

# Floating point support - do not disable.
device          npx

# Power management support (see NOTES for more options)
#device         apm
# Add suspend/resume support for the i8254.
device          pmtimer

# PCCARD (PCMCIA) support
# Pcmcia and cardbus bridge support
#device         cbb                     # cardbus (yenta) bridge
#device         pcic                    # ExCA ISA and PCI bridges
#device         pccard                  # PC Card (16-bit) bus
#device         cardbus                 # CardBus (32-bit) bus

# Serial (COM) ports
device          sio             # 8250, 16[45]50 based serial ports

# Parallel port
device          ppc
device          ppbus           # Parallel port bus (required)
device          lpt             # Printer
device          plip            # TCP/IP over parallel
device          ppi             # Parallel port interface device
#device         vpo             # Requires scbus and da


# PCI Ethernet NICs.
#device         de              # DEC/Intel DC21x4x (``Tulip'')
device          em              # Intel PRO/1000 adapter Gigabit Ethernet 
Card
#device         txp             # 3Com 3cR990 (``Typhoon'')
#device         vx              # 3Com 3c590, 3c595 (``Vortex'')

# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
#device         miibus          # MII bus support
#device         dc              # DEC/Intel 21143 and various workalikes
#device         fxp             # Intel EtherExpress PRO/100B (82557, 82558)
#device         pcn             # AMD Am79C97x PCI 10/100 (precedence over 
'lnc')
#device         rl              # RealTek 8129/8139
#device         sf              # Adaptec AIC-6915 (``Starfire'')
#device         sis             # Silicon Integrated Systems SiS 900/SiS 
7016
#device         sk              # SysKonnect SK-984x and SK-982x gigabit 
ethernet
#device         ste             # Sundance ST201 (D-Link DFE-550TX)
#device         ti              # Alteon Networks Tigon I/II gigabit 
ethernet
#device         tl              # Texas Instruments ThunderLAN
#device         tx              # SMC EtherPower II (83c170 ``EPIC'')
#device         vr              # VIA Rhine, Rhine II
#device         wb              # Winbond W89C840F
#device         xl              # 3Com 3c90x (``Boomerang'', ``Cyclone'')
#device         bge             # Broadcom BCM570xx Gigabit Ethernet

# ISA Ethernet NICs.  pccard nics included.
#device         cs              # Crystal Semiconductor CS89x0 NIC
# 'device ed' requires 'device miibus'
#device         ed              # NE[12]000, SMC Ultra, 3c503, DS8390 cards
#device         ex              # Intel EtherExpress Pro/10 and Pro/10+
#device         ep              # Etherlink III based cards
#device         fe              # Fujitsu MB8696x based cards
#device         ie              # EtherExpress 8/16, 3C507, StarLAN 10 etc.
#device         lnc             # NE2100, NE32-VL Lance Ethernet cards
#device         sn              # SMC's 9000 series of ethernet chips
#device         xe              # Xircom pccard ethernet

# ISA devices that use the old ISA shims
#device         le

# Wireless NIC cards
#device         wlan            # 802.11 support
#device         an              # Aironet 4500/4800 802.11 wireless NICs.
#device         awi             # BayStack 660 and others
#device         wi              # WaveLAN/Intersil/Symbol 802.11 wireless 
NICs.
#device         wl              # Older non 802.11 Wavelan wireless NIC.

# Pseudo devices - the number indicates how many units to allocate.
device          random          # Entropy device
device          loop            # Network loopback
device          ether           # Ethernet support
device          sl              # Kernel SLIP
device          ppp             # Kernel PPP
device          tun             # Packet tunnel.
device          pty             # Pseudo-ttys (telnet etc)
device          md              # Memory "disks"
device          gif             # IPv6 and IPv4 tunneling
device          faith           # IPv6-to-IPv4 relaying (translation)

# The `bpf' device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
device          bpf             # Berkeley packet filter

# USB support
device          uhci            # UHCI PCI->USB interface
device          ohci            # OHCI PCI->USB interface
device          usb             # USB Bus (required)
#device         udbp            # USB Double Bulk Pipe devices
device          ugen            # Generic
device          uhid            # "Human Interface Devices"
device          ukbd            # Keyboard
#device         ulpt            # Printer
#device         umass           # Disks/Mass storage - Requires scbus and da
device          ums             # Mouse
#device         urio            # Diamond Rio 500 MP3 player
#device         uscanner        # Scanners
# USB Ethernet, requires mii
#device         aue             # ADMtek USB ethernet
#device         axe             # ASIX Electronics USB ethernet
#device         cue             # CATC USB ethernet
#device         kue             # Kawasaki LSI USB ethernet

# FireWire support
device          firewire        # FireWire bus code
#device         sbp             # SCSI over FireWire (Requires scbus and da)
#device         fwe             # Ethernet over FireWire (non-standard!)

# Sound card support
device          pcm             # PCM audio


opyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.1-RELEASE #2: Wed Jan 28 07:16:29 PST 2004
    avd@adiscolo4.xyzzy.com:/usr/src/sys/i386/compile/ADISCOLO4
Preloaded elf kernel "/boot/kernel/kernel" at 0xc050a000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc050a294.
Timecounter "i8254"  frequency 1193182 Hz
Timecounter "TSC"  frequency 2593507176 Hz
CPU: Intel(R) Pentium(R) 4 CPU 2.60GHz (2593.51-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf29  Stepping = 9
  
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Hyperthreading: 2 logical CPUs
real memory  = 536281088 (511 MB)
avail memory = 515387392 (491 MB)
netsmb_dev: loaded
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <DELL   GX270  > on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 9 entries at 0xc00feae0
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI-fast"  frequency 3579545 Hz
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_cpu0: <CPU> port 0x530-0x537 on acpi0
acpi_cpu1: <CPU> port 0x530-0x537 on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82865 host to AGP bridge> mem 0xe8000000-0xefffffff at device 
0.0 on pci0
pcib1: <PCIBIOS PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xff80-0xff9f irq 11 
at device 29.0 on pci0
usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xff60-0xff7f irq 10 
at device 29.1 on pci0
usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xff40-0xff5f irq 9 
at device 29.2 on pci0
usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port 0xff20-0xff3f irq 11 
at device 29.3 on pci0
usb3: <Intel 82801EB (ICH5) USB controller USB-D> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 29.7 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib2
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.5.31> port 
0xdf40-0xdf7f mem 0xfcfe0000-0xfcffffff irq 9 at device 12.0 on pci2
em0:  Speed:100 Mbps  Duplex:Half
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH5 UDMA100 controller> port 
0xffa0-0xffaf,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 mem 
0xfebffc00-0xfebfffff irq 9 at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
atapci1: <Intel ICH5 SATA150 controller> port 
0xfea0-0xfeaf,0xfe30-0xfe33,0xfe20-0xfe27,0xfe10-0xfe13,0xfe00-0xfe07 irq 9 
at device 31.2 on pci0
ata2: at 0xfe00 on atapci1
ata3: at 0xfe20 on atapci1
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pci0: <multimedia, audio> at device 31.5 (no driver attached)
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 
0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
ppc0 port 0x778-0x77f,0x378-0x37f irq 7 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
orm0: <Option ROMs> at iomem 
0xdd800-0xdffff,0xd1000-0xdd7ff,0xcf800-0xd0fff,0xc0000-0xcf7ff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
ad0: 76293MB <IC35L090AVV207-0> [155009/16/63] at ata0-master UDMA100
acd0: DVD-ROM <HL-DT-STDVD-ROM GDR8162B> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s1a


----Original Message Follows----
From: Adam Bozanich <abozan01@ccsf.edu>
To: Anthony Discolo <avdiscolo@hotmail.com>
CC: freebsd-questions@freebsd.org
Subject: Re: FreeBSD 5.1 support for Dell Integrated audio?
Date: Tue, 27 Jan 2004 19:54:57 -0800 (PST)


On Tue, 27 Jan 2004, Anthony Discolo wrote:

 > I have a new Dell Optiplex GX270 and I can't seem to get integrated audio
 > ("Integrated Sound Blaster Compatible AC97") to work.  I've tried
 > configuring the pcm and sbc drivers with no luck.
 >
 > Any help would be greatly appreciated.
 >
 > Thanks,
 > Anthony

Try adding

snd_ich_load="YES"

to /boot/loader.conf

-Adam

_________________________________________________________________
High-speed users—be more efficient online with the new MSN Premium Internet 
Software. http://join.msn.com/?pgmarket=en-us&page=byoa/prem&ST=1



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Sea2-F39IiC08B4wQyk0002e504>