Skip site navigation (1)Skip section navigation (2)
Date:      Sun, 03 Apr 2005 14:33:05 -0700
From:      sam sirlin <swsirlin@earthlink.net>
To:        freebsd-stable@freebsd.org
Subject:   acd0: FAILURE - MODE_SENSE_BIG timed out 
Message-ID:  <42506111.5030505@earthlink.net>

next in thread | raw e-mail | index | archive | help
I've been getting these timeouts for some time on boot,  but up till now 
when they appear they just slow the boot down. After cvsup on 4/2, I now 
sometimes get a couple of new messages which hang up the boot process:
...
acd0: FAILURE - MODE_SENSE_BIG timed out
acd0: FAILURE - ATAPI_Identity ...
acd0: timeout state=0 unexpected
(hangs here till  hard reboot)

Are there some tweaks to parameters to prevent this?

Sam Sirlin

I 'm running

FreeBSD celeborn.my.domain 5.4-PRERELEASE FreeBSD 5.4-PRERELEASE #0: Sat 
Apr  2 17:48:39 PST 2005     
sam@celeborn.my.domain:/usr/obj/usr/src/sys/CELEBORN  amd64

Here's an  example of what used to happen, even with 5.4 up till 4/2:

Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.3-STABLE #0: Sun Nov 21 10:58:56 PST 2004
    sam@celeborn.my.domain:/usr/obj/usr/src/sys/CELEBORN
ACPI APIC Table: <A M I  OEMAPIC >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) 64 Processor 3200+ (2002.57-MHz K8-class CPU)
  Origin = "AuthenticAMD"  Id = 0xf48  Stepping = 8
  
Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MM
X,FXSR,SSE,SSE2>
  AMD Features=0xe0500800<SYSCALL,NX,MMX+,LM,3DNow+,3DNow>
real memory  = 1072889856 (1023 MB)
avail memory = 1024090112 (976 MB)
ioapic0: Changing APIC ID to 1
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0 <Version 0.3> irqs 0-23 on motherboard
acpi0: <A M I OEMRSDT> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
fwohci0: <VIA Fire II (VT6306)> port 0xcc00-0xcc7f mem 
0xf7900000-0xf79007ff irq 16 at device 7.0 on pc
i0
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:e0:18:00:00:62:29:1b
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:e0:18:62:29:1b
fwe0: Ethernet address: 02:e0:18:62:29:1b
fwe0: if_start running deferred for Giant
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
skc0: <3Com 3C940 Gigabit Ethernet> port 0xdc00-0xdcff mem 
0xf7c00000-0xf7c03fff irq 17 at device 10.0
on pci0
skc0: 3Com Gigabit LOM (3C940)
sk0: <Marvell Semiconductor, Inc. Yukon> on skc0
sk0: Ethernet address: 00:0e:a6:74:6a:02
miibus0: <MII bus> on sk0
e1000phy0: <Marvell 88E1000 Gigabit PHY> on miibus0
e1000phy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 
1000baseTX-FDX, auto
pcm0: <Creative EMU10K1> port 0xec00-0xec1f irq 17 at device 12.0 on pci0
pcm0: <eMicro EM28028 AC97 Codec>
atapci0: <VIA 6420 SATA150 controller> port 
0xc800-0xc8ff,0xd000-0xd00f,0xd400-0xd403,0xd800-0xd807,0xe
000-0xe003,0xe400-0xe407 irq 20 at device 15.0 on pci0
ata2: channel #0 on atapci0
ata3: channel #1 on atapci0
atapci1: <VIA 8237 UDMA133 controller> port 
0xfc00-0xfc0f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device
 15.1 on pci0
ata0: channel #0 on atapci1
ata1: channel #1 on atapci1
uhci0: <VIA 83C572 USB controller> port 0xb400-0xb41f irq 21 at device 
16.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xb800-0xb81f irq 21 at device 
16.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <VIA 83C572 USB controller> port 0xc000-0xc01f irq 21 at device 
16.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <VIA 83C572 USB controller> on uhci2
usb2: USB revision 1.0
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <VIA 83C572 USB controller> port 0xc400-0xc41f irq 21 at device 
16.3 on pci0
uhci3: [GIANT-LOCKED]
usb3: <VIA 83C572 USB controller> on uhci3
usb3: USB revision 1.0
uhub3: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 16.4 (no driver attached)
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
fdc0: <floppy drive controller (FDE)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 
on acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 flags 0x10 on 
acpi0
sio0: type 16550A
sio1: configured irq 4 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 on acpi0
sio1: type 16550A
orm0: <ISA Option ROM> at iomem 0xc0000-0xcefff on isa0
ppc0: cannot reserve I/O port range
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 2002574586 Hz quality 800
Timecounters tick every 0.976 msec
ad0: 114473MB <WDC WD1200JB-00DUA0/65.13G65> [232581/16/63] at 
ata0-master UDMA100
ad1: 114473MB <WDC WD1200JB-00FUA0/15.05R15> [232581/16/63] at 
ata0-slave UDMA100
acd0: FAILURE - MODE_SENSE_BIG timed out
acd0: FAILURE - MODE_SENSE_BIG timed out
acd0: FAILURE - MODE_SENSE_BIG timed out
acd0: FAILURE - MODE_SENSE_BIG timed out
acd0: FAILURE - MODE_SENSE_BIG timed out
acd0: CDROM <TDK DVDRW420N/1.39> at ata1-master UDMA33
acd0: FAILURE - TEST_UNIT_READY timed out
acd0: FAILURE - PREVENT_ALLOW timed out
acd0: FAILURE - TEST_UNIT_READY timed out
acd0: FAILURE - TEST_UNIT_READY timed out
acd0: FAILURE - PREVENT_ALLOW timed out
acd0: FAILURE - TEST_UNIT_READY timed out
acd0: FAILURE - PREVENT_ALLOW timed out
acd0: FAILURE - TEST_UNIT_READY timed out
acd0: FAILURE - TEST_UNIT_READY timed out
acd0: FAILURE - PREVENT_ALLOW timed out
acd0: FAILURE - TEST_UNIT_READY timed out
acd0: FAILURE - PREVENT_ALLOW timed out
acd0: FAILURE - TEST_UNIT_READY timed out
acd0: FAILURE - TEST_UNIT_READY timed out
acd0: FAILURE - PREVENT_ALLOW timed out
Mounting root from ufs:/dev/ad0s3a



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?42506111.5030505>