Skip site navigation (1)Skip section navigation (2)
Date:      Sun, 28 Sep 2003 13:51:00 -0400
From:      "nw1" <network101@covad.net>
To:        <freebsd-reply@akruijff.dds.nl>, <freebsd-questions@freebsd.org>
Subject:    Re: FreeBSD 4.8-P10 --Mouse doesn't move in the console or XFree86--
Message-ID:  <02e101c385e9$141328e0$0300a8c0@install>
References:  <020f01c385b5$668dce10$0300a8c0@install> <20030928174406.GB16713@dds.nl>

next in thread | previous in thread | raw e-mail | index | archive | help
Alex: please see the update/corrections to this post at
http://69.3.136.141/freebsd/usb_mouse.txt

----- Original Message ----- 
From: "Alex de Kruijff" <freebsd@akruijff.dds.nl>
To: "nw1" <network101@covad.net>
Cc: <freebsd-questions@freebsd.org>
Sent: Sunday, September 28, 2003 1:44 PM
Subject: Re: FreeBSD 4.8-P10 --Mouse doesn't move in the console or XFree86--


> On Sun, Sep 28, 2003 at 07:41:04AM -0400, nw1 wrote:
> > Neither mouse will work in the console or in XFree86.
> >
> > Gigabyte GA-6BXDS = main board
> > BIOS= AWARD (2A69KG01) ver. 4.51PG
> >
> > In the PCI/ISA section of the BIOS, a USB setting of: "Assign IRQ For USB: Enabled"
(is
> > set)
> > There is also a "USB Keyboard Support" setting within the BIOS's  "INTERGRATED
> > PEROPHERALS" section; I have tried this setting to both "Enabled and Disabled".
> >
> > There aren't any other USB settings in this BIOS.
> >
> > We are using these devices that are known working devices.
> > Mouse-1 is: Logitech | model: M-BD58 | optical corded wheel
> > Mouse-2 is: Logitech | model: M-RM67A | Optical cordless wheel
> >
> > Our Kernel:
> > # USB support
> > device          uhci            # UHCI PCI->USB interface
> > device          usb             # USB Bus (required)
> > device          ums             # Mouse
> > pseudo-device   ether           # Ethernet support
> >
> > Our /etc/rc.conf:
> > # grep -i mouse /etc/rc.conf
> > moused_enable="YES"
> > moused_port="/dev/ums0"
> > # grep -i usb /etc/rc.conf
> > usbd_enable="YES"
> >
> > Our /dev:
> > ls -l /dev | grep -i ums
> > crw-rw----   1 root   operator  111,   0 Sep 27 13:16 ums0
> >
> > dmesg reports:
> > # dmesg | grep -i usb
> > uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xa000-0xa01f irq 10 at device
7.2
> > on pci0
> > usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
> > usb0: USB revision 1.0
> > ums0: Logitech USB Mouse, rev 1.10/6.10, addr 2, iclass 3/1
> >
> > Upon booting into the OS, using the above BIOS, and other settings --with either of
the
> > above devices; the mouse is seen on screen, but it refuse to respond while moving the
> > hand-held device.  Should we unplug one mouse (from either usb port) to test the other
> > mouse, we receive the following on-screen message(s), respectively of the motherboards
USB
> > port we were using:
> >
> > uhub0: device problem, disabling port 2
> > uhub0: device problem, disabling port 1
> >
> > When we plug the devices back in to either of the motherboards mouse ports, there's no
> > indication at all, from the OS, that a USB device was attached.
> >
> > Reminder: these devices are in perfect working order.
>
> It seems to be in order. As i see it thare are two posibilties. 1) Your
> mouse isn't supported or 2) There is a (new) bug in the system.
>
> Did it work on previous version of FreeBSD?
>
> -- 
> Alex
>
> Articles based on solutions that I use:
> http://www.kruijff.org/alex/index.php?dir=docs/FreeBSD/
> _______________________________________________
> freebsd-questions@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org"
>



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?02e101c385e9$141328e0$0300a8c0>