Skip site navigation (1)Skip section navigation (2)
Date:      Sat, 11 Mar 2006 14:56:06 +0100
From:      "V. T. Mueller" <freebsd-amd64@datafarm.de>
To:        Ken Gunderson <kgunders@teamcool.net>
Cc:        freebsd-amd64@freebsd.org
Subject:   Re: major pita w/LSI Tyan TA26 combo
Message-ID:  <4412D6F6.1050805@datafarm.de>
In-Reply-To: <20060306103138.47e23f8d.kgunders@teamcool.net>
References:  <20060303133844.451cb4f7.kgunders@teamcool.net>	<200603031343.10334.fcash@ocis.net>	<E8B9BFA8-AEF9-4820-8817-523ACAC53B18@khera.org>	<200603060807.32455.fcash@ocis.net> <440C6490.3060602@datafarm.de> <20060306103138.47e23f8d.kgunders@teamcool.net>

next in thread | previous in thread | raw e-mail | index | archive | help

Hello Ken,

Ken Gunderson schrieb:
> On Mon, 06 Mar 2006 17:34:24 +0100
> "V. T. Mueller" <freebsd-amd64@datafarm.de> wrote:
>>We used to have problems with adapters running at 66MHz or more 
>>using risercards in a number of Tyan S2707. Those risercards came 
>>from Chenbro, along with the cases. By replacing them with Tyan 
>>risercards (which became available a few months *after* the boards) 
>>those problems vanished.
>>
>>And now comes the interesting part: Months later, problems began to 
>>reoccur. In the end we found out that the power supplies were of 
>>somewhat low quality. Replacing the power supply helped in every 
>>system that was affected.
> 
> Could you please provide more details about the low quality units, e.g.
> make and model?

Sorry for the delay. Here is the data of one of those PSUs:

EMACS/zippy Model: P2U-6300P (V)
Ser. No.: T33406403
http://www.zippy.com.tw/P_product_detail.asp?lv_rfnbr=2&pp_rfnbr=1074&pcp_rfnbr=2&pp_name=&pcp_name=2U%20Single&pcpw_rfnbr=2&pp_code=P2U-6300P

We had a bunch of them replaced with newer versions. I can't tell 
you from which serial number onwards the problems went away but I 
was told that all models with "black labelled fan" cause problems 
and all with "blue labelled fan" work flawlessly. So the latter 
might be somewhat revision 2 ...

Cheers,
vt




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4412D6F6.1050805>