Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 19 Apr 2000 23:18:46 +0200 (CEST)
From:      patrik@astrom.net
To:        freebsd-questions@freebsd.org
Subject:   PANIC: ffs_clusteralloc: map mismatch
Message-ID:  <Pine.BSF.4.10.10004192317260.62317-100000@styx.astrom.net>

next in thread | raw e-mail | index | archive | help
Hi!.

Im trying to install 4.0-RELEASE from a CD I created from a ISO image
downloaded from ftp.freebsd.org. When Im done with the installation and
have formated the disk and the installatin program is about to begin
copying the files to disk then I get some kind of a trap saying.

PANIC: ffs_clusteralloc: map mismatch

I then tried to install 3.4-Relase also from a CD created from an ISO
image downloaded from ftp.freebsd.org and everything works with that
version.

But I really want to run FBSD 4.0 on this box so I moved the disk to
another mashine and did the installation there and everything when ok.
When I moved the disk over to the box I want to run it on and booted it
I got the following error message.

ad0: UDMA ICRC WRITE ERROR blk# 309311 retrying
ad0: UDMA ICRC WRITE ERROR blk# 309311 retrying
ad0: UDMA ICRC WRITE ERROR blk# 309311 retrying
ad0: UDMA ICRC WRITE ERROR blk# 309311ata0-master: WARNING: WAIT_READY
active=AT
A_ACTIVE_ATA
 falling back to PIO mode

Does this error message mean that there is somekind of a UDMA problem
on this box, or could i be something simple as a bad Cable ?.

Can anyone give me a clue whats wrong ?.

Im including all of the boot messages from this box.

Most gratefull for any hints or suggestions.

Regards Patrik Astrom, Stockholm Sweden.


Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
        The Regents of the University of California. All rights reserved.
FreeBSD 4.0-RELEASE #0: Mon Mar 20 22:50:22 GMT 2000
    root@monster.cdrom.com:/usr/src/sys/compile/GENERIC
Timecounter "i8254"  frequency 1193182 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (416.53-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x660  Stepping = 0

Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PA
T,PSE36,MMX,FXSR>
real memory  = 134205440 (131060K bytes)
avail memory = 126238720 (123280K bytes)
Preloaded elf kernel "kernel" at 0xc03c0000.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <NVidia Riva TNT graphics accelerator> at 0.0 irq 11
isab0: <Intel 82371AB PCI to ISA bridge> at device 4.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xd800-0xd80f at device 4.1
on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <Intel 82371AB/EB (PIIX4) USB controller> at 4.2 irq 9
chip1: <Intel 82371AB Power management controller> port 0xe800-0xe80f at
device 
4.3 on pci0
fxp0: <Intel EtherExpress Pro 10/100B Ethernet> port 0xd000-0xd01f mem
0xdf80000
0-0xdf8fffff,0xe2000000-0xe2000fff irq 9 at device 9.0 on pci0
fxp0: Ethernet address 00:a0:c9:ca:68:4e
fxp0: supplying EUI64: 00:a0:c9:ff:fe:ca:68:4e
ahc0: <Adaptec 2940 Ultra SCSI adapter> port 0xb800-0xb8ff mem
0xdf000000-0xdf00
0fff irq 10 at device 10.0 on pci0
ahc0: aic7880 Single Channel A, SCSI Id=7, 16/255 SCBs
isa0: unexpected tag 14
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <keyboard controller (i8042)> at port 0x60-0x6f on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0

sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppi0: <Parallel I/O> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
plip0: <PLIP network interface> on ppbus0
unknown0: <Audio> at port 0x220-0x22f,0x330-0x331,0x388-0x38b irq 5 drq
1,5 on i
sa0
unknown1: <Game> at port 0x200-0x207 on isa0
unknown2: <WaveTable> at port 0x620-0x623 on isa0
ad0: 6197MB <IBM-DHEA-36481> [12592/16/63] at ata0-master using UDMA33
acd0: CDROM <Pioneer CD-ROM ATAPI Model DR-A04S 0105> at ata1-master using
PIO4
Waiting 15 seconds for SCSI devices to settle
Mounting root from ufs:/dev/ad0s1a
cd0 at ahc0 bus 0 target 6 lun 0
cd0: <SONY CD-RW  CRX140S 1.0e> Removable CD-ROM SCSI-4 device 
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
plip0: <PLIP network interface> on ppbus0
unknown0: <Audio> at port 0x220-0x22f,0x330-0x331,0x388-0x38b irq 5 drq
1,5 on i
sa0
unknown1: <Game> at port 0x200-0x207 on isa0
unknown2: <WaveTable> at port 0x620-0x623 on isa0
ad0: 6197MB <IBM-DHEA-36481> [12592/16/63] at ata0-master using UDMA33
acd0: CDROM <Pioneer CD-ROM ATAPI Model DR-A04S 0105> at ata1-master using
PIO4
Waiting 15 seconds for SCSI devices to settle
Mounting root from ufs:/dev/ad0s1a
cd0 at ahc0 bus 0 target 6 lun 0
cd0: <SONY CD-RW  CRX140S 1.0e> Removable CD-ROM SCSI-4 device 
cd0: 10.000MB/s transfers (10.000MHz, offset 15)
cd0: Attempt to query device size failed: NOT READY, Medium not present
ad0: UDMA ICRC WRITE ERROR blk# 309311 retrying
ad0: UDMA ICRC WRITE ERROR blk# 309311 retrying
ad0: UDMA ICRC WRITE ERROR blk# 309311 retrying
ad0: UDMA ICRC WRITE ERROR blk# 309311ata0-master: WARNING: WAIT_READY
active=AT
A_ACTIVE_ATA
 falling back to PIO mode
fxp0: starting DAD for fe80:0001::02a0:c9ff:feca:684e
fxp0: DAD complete for fe80:0001::02a0:c9ff:feca:684e - no duplicates
found




To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.10.10004192317260.62317-100000>