Date: Tue, 30 Jul 2002 11:17:51 +1000 From: Jacob Rhoden <jrhoden@unimelb.edu.au> To: freebsd-questions@FreeBSD.org Subject: Re: sound card on intel motherboard - details Message-ID: <5.1.1.6.0.20020730111255.00b6b838@wheresmymailserver.com>
next in thread | raw e-mail | index | archive | help
Hi, Here is all the information which I could find. Any ideas you guys might have as how to get the sound card to work would be much appreciated! Thanks. (Please note I have read through instructions in handbook and searched google for info on this and so on . . .) The motherboard is an intel D845EPT2, specs are at: http://www.intel.com/design/motherbd/pt2/index.htm?iid=ipp_browse+motherbd_d845ept2&; Sound card is reported on web site to be: Audio subsystem for AC '97 processing using the Analog Devices AD1981A codec featuring SoundMAX Cadenza /dev/sndstat says the sound is not configured: smyrna# cat /dev/sndstat cat: /dev/sndstat: Device not configured This is the dmesg when I enable all sound devices in the kernel (have tried all different options from LINT that I could find). I have snipped what I think is probably not useful. I don't know about the rest. FreeBSD 4.6-STABLE #1: Thu Jul 25 17:51:09 EST 2002 CPU: Pentium 4 (1599.96-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf12 Stepping = 2 Features=0x3febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUS H,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,<b28>,ACC> real memory = 536084480 (523520K bytes) avail memory = 516771840 (504660K bytes) Preloaded elf kernel "kernel" at 0xc04b6000. md0: Malloc disk Using $PIR table, 10 entries at 0xc00f4670 npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Intel 82845 Host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 pcib1: <Intel 82845 PCI-PCI (AGP) bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <Matrox MGA G400 AGP graphics accelerator> at 0.0 irq 11 uhci0: <UHCI (generic) USB controller> port 0xe800-0xe81f irq 11 at device 29.0 on pci0 uhci0: (New UHCI DeviceId=0x24c28086) <snip usb stuff> pci0: <USB controller> at 29.7 irq 10 pcib2: <Intel 82801BA/BAM (ICH2) Hub to PCI bridge> at device 30.0 on pci0 pci2: <PCI bus> on pcib2 ed0: <NE2000 PCI Ethernet (RealTek 8029)> port 0xdc00-0xdc1f irq 9 at device 2.0 on pci2 ed0: address 00:50:ba:f2:33:79, type NE2000 (16 bit) fxp0: <Intel Pro/100 Ethernet> port 0xd880-0xd8bf mem 0xfeaff000-0xfeafffff irq 11 at device 8.0 on pci2 fxp0: Ethernet address 00:03:47:2a:2f:61 inphy0: <i82562ET 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto isab0: <PCI to ISA bridge (vendor=8086 device=24c0)> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Generic PCI ATA controller> port 0xffa0-0xffaf,0-0x3,0-0x7,0-0x3,0-0x7 at device 31.1 on p ci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 pci0: <unknown card> (vendor=0x8086, dev=0x24c3) at 31.3 irq 11 pci0: <unknown card> (vendor=0x8086, dev=0x24c5) at 31.5 irq 11 orm0: <Option ROM> at iomem 0xc0000-0xc8fff on isa0 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model IntelliMouse Explorer, device ID 4 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0: configured irq 4 not in bitmap of probed irqs 0 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: configured irq 3 not in bitmap of probed irqs 0 sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 sb_reset_dsp failed sb_reset_dsp failed awe0 at port 0x620 on isa0 AWE32: not detected awe0: driver is using old-style compatability shims Checking for GUS Plug-n-Play ... No Plug-n-Play devices were found oops I didnt find gus unknown: <PNP0000> can't assign resources unknown: <PNP0501> can't assign resources unknown: <PNP0501> can't assign resources unknown: <PNP0700> can't assign resources unknown: <PNP0400> can't assign resources unknown: <PNP0c02> can't assign resources unknown: <PNP0303> can't assign resources unknown: <PNP0f13> can't assign resources IP packet filtering initialized, divert disabled, rule-based forwarding enabled, default to accept, unlimited logging ad0: 76319MB <ST380021A> [155061/16/63] at ata0-master BIOSDMA acd0: CD-RW <CD-RW 24X10X40> at ata0-slave PIO4 acd1: MODE_SENSE_BIG command timeout - resetting ata1: resetting devices .. done <snip cd stuff> acd1: MODE_SENSE_BIG command timeout - resetting ata1: resetting devices .. done acd1: CDROM <SONY CD-ROM CDU523 1> at ata1-master PIO4 Mounting root from ufs:/dev/ad0s2a _______________________________________________________ Jacob Rhoden Phone: +61 3 9844 6102 ITS Division Email: jrhoden@unimelb.edu.au Melbourne University Mobile: +61 403 788 386 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?5.1.1.6.0.20020730111255.00b6b838>