Skip site navigation (1)Skip section navigation (2)
Date:      29 Oct 2007 01:22:08 +0100
From:      "Arno J. Klaassen" <arno@heho.snv.jussieu.fr>
To:        Rod Person <rodperson@verizon.net>
Cc:        current@freebsd.org
Subject:   Re: 2nd nfe interface not showing up on Tyan S2895
Message-ID:  <wpabq2n51r.fsf@heho.snv.jussieu.fr>
In-Reply-To: <20071028200538.2181ba87@atomizer.opensourcebeef.net>
References:  <wppryzxfg2.fsf@heho.snv.jussieu.fr> <20071028200538.2181ba87@atomizer.opensourcebeef.net>

next in thread | previous in thread | raw e-mail | index | archive | help
Rod Person <rodperson@verizon.net> writes:

> On Sun, 28 Oct 2007 19:27:25 +0100
> "Arno J. Klaassen" <arno@heho.snv.jussieu.fr> wrote:
> 
> > 
> >  - more serious, this board is supposed to have two of them
> >    (enabled in BIOS as 'Slave Device') but only one of them
> >    shows up at boot (and in pciconf -vl)
> 
>  
> > Does anyone have a hint how to get that second interface at least
> > to show up? Thanx in advance and feel free to contact me for
> > more detailed info.
> > 
> 
> I have an S2895 with the dual Gigabit nics. I've been running CURRENT
> since Feb 2006 and never had a problem getting both nics to show up as
> long as the 2nd is enabled in the BIOS. The only problems I've had is
> with the Firewire support, which worked for a moment then cause all
> kinds of problems. Are you sure that the 2nd nic is good?

No : I just bought the board a couple of days ago and did not
try anything else than fbsd on it.

That said, I looked again at the Block Diagram in the manual and
wonder whether they mean "second physical CPU"? I just
have one Opteron 285 installed for now (ordered a second one).
Do you have physically two CPUs installed? 

I have both interfaces enabled in the BIOS (and playing with the
"MAC Bridge" setting does not help (but I do not understand what
that setting is supposed to do...)

Thanx for your help

Regards, Arno

 
> 
> -- 
> Rod
> 
> http://roddierod.homeunix.net:8080
> _______________________________________________
> freebsd-current@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-current
> To unsubscribe, send any mail to "freebsd-current-unsubscribe@freebsd.org"

-- 

  Arno J. Klaassen

  SCITO S.A.
  8 rue des Haies
  F-75020 Paris, France
  http://scito.com



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?wpabq2n51r.fsf>