From owner-freebsd-questions@FreeBSD.ORG Sun Jan 8 23:22:39 2012 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 82932106566B for ; Sun, 8 Jan 2012 23:22:39 +0000 (UTC) (envelope-from vince@unsane.co.uk) Received: from unsane.co.uk (unsane-pt.tunnel.tserv5.lon1.ipv6.he.net [IPv6:2001:470:1f08:110::2]) by mx1.freebsd.org (Postfix) with ESMTP id 72B2B8FC18 for ; Sun, 8 Jan 2012 23:22:38 +0000 (UTC) Received: from pippin.unsane.co.uk (pippin.unsane.co.uk [10.10.10.20]) (authenticated bits=0) by unsane.co.uk (8.14.4/8.14.4) with ESMTP id q08NMagI038772 (version=TLSv1/SSLv3 cipher=DHE-RSA-CAMELLIA256-SHA bits=256 verify=NO) for ; Sun, 8 Jan 2012 23:22:36 GMT (envelope-from vince@unsane.co.uk) Message-ID: <4F0A253C.9050205@unsane.co.uk> Date: Sun, 08 Jan 2012 23:22:36 +0000 From: Vincent Hoffman User-Agent: Mozilla/5.0 (Macintosh; Intel Mac OS X 10.6; rv:8.0) Gecko/20111105 Thunderbird/8.0 MIME-Version: 1.0 To: freebsd-questions@freebsd.org References: <1325995909.53760.11.camel@btw.pki2.com> In-Reply-To: <1325995909.53760.11.camel@btw.pki2.com> X-Enigmail-Version: 1.3.4 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Subject: Re: RELENG_9 and mps driver (LSI 9211-8i) X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 08 Jan 2012 23:22:39 -0000 On 08/01/2012 04:11, Dennis Glatting wrote: > I have three LSI 9211-8i boards in my system: two flashed to T and one > R. The Ts appear to work fine but the operating system doesn't see the > RAID1 volume on R, but neither did RELENG_8. > > I am writing to ask how well R is supported, if at all. Or, since this > my first case of using R under LSI+FreeBSD, perhaps there is common > mistakes I may be making -- the array is stable. I dont have one handy to test but the manpage says in the BUGS section BUGS This driver is still in development, it has only been tested on the amd64 architecture and has some known shortcomings: o No IR (Integrated RAID) support. o No userland utility support (e.g. mptutil(8).) o Sometimes the driver gets into a state where devices arrive and depart multiple times, without user intervention. o The error recovery code isn't complete. This along with this thread http://forums.freebsd.org/archive/index.php/t-4505.html Indicates the R isnt fully supported, from what i can gather its fine as JBOD so you can use zfs or one of the geom software RAIDs though. Vince > The boards (mps1 is the board with the RAID1 array): > > mps0: port 0xde00-0xdeff mem > 0xfd9fc000-0xfd9fffff,0xfd980000-0xfd9bffff irq 19 at device 0.0 on pci1 > mps0: Firmware: 12.00.00.00 > mps0: IOCCapabilities: > 1285c > mps1: port 0x9e00-0x9eff mem > 0xfdefc000-0xfdefffff,0xfde80000-0xfdebffff irq 19 at device 0.0 on pci5 > mps1: Firmware: 12.00.00.00 > mps1: IOCCapabilities: > 185c > mps2: port 0x8e00-0x8eff mem > 0xfdcfc000-0xfdcfffff,0xfdc80000-0xfdcbffff irq 16 at device 0.0 on pci6 > mps2: Firmware: 12.00.00.00 > mps2: IOCCapabilities: > 1285c > > > > bd3# uname -a > FreeBSD bd3 9.0-STABLE FreeBSD 9.0-STABLE #0: Sat Jan 7 16:09:10 PST > 2012 root@bd3:/sys/amd64/compile/BULLDOZER amd64 > > (i.e., the OS was csup against RELENG_9 and build today). > > > Other data: > > > bd3# dmesg > Copyright (c) 1992-2012 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights > reserved. > FreeBSD is a registered trademark of The FreeBSD Foundation. > FreeBSD 9.0-STABLE #0: Sat Jan 7 16:09:10 PST 2012 > root@bd3:/sys/amd64/compile/BULLDOZER amd64 > CPU: AMD FX(tm)-8150 Eight-Core Processor (4017.99-MHz > K8-class CPU) > Origin = "AuthenticAMD" Id = 0x600f12 Family = 15 Model = 1 > Stepping = 2 > > Features=0x178bfbff MOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> > > Features2=0x1698220b XSAVE,AVX> > AMD Features=0x2e500800 > AMD > Features2=0x1c9bfff BS,XOP,SKINIT,WDT,LWP,FMA4,NodeId,Topology,,> > TSC: P-state invariant, performance statistics > real memory = 17179869184 (16384 MB) > avail memory = 16508002304 (15743 MB) > Event timer "LAPIC" quality 400 > ACPI APIC Table: > FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs > FreeBSD/SMP: 1 package(s) x 8 core(s) > cpu0 (BSP): APIC ID: 0 > cpu1 (AP): APIC ID: 1 > cpu2 (AP): APIC ID: 2 > cpu3 (AP): APIC ID: 3 > cpu4 (AP): APIC ID: 4 > cpu5 (AP): APIC ID: 5 > cpu6 (AP): APIC ID: 6 > cpu7 (AP): APIC ID: 7 > ioapic0: Changing APIC ID to 8 > ioapic0 irqs 0-23 on motherboard > kbd1 at kbdmux0 > acpi0: on motherboard > acpi0: Power Button (fixed) > acpi0: reservation of 0, a0000 (3) failed > acpi0: reservation of 100000, cfca0000 (3) failed > Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 > acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 > cpu0: on acpi0 > cpu1: on acpi0 > cpu2: on acpi0 > cpu3: on acpi0 > cpu4: on acpi0 > cpu5: on acpi0 > cpu6: on acpi0 > cpu7: on acpi0 > acpi_button0: on acpi0 > pcib0: port 0xcf8-0xcff on acpi0 > pci0: on pcib0 > pci0: at device 0.2 (no driver attached) > pcib1: irq 19 at device 3.0 on pci0 > pci1: on pcib1 > mps0: port 0xde00-0xdeff mem > 0xfd9fc000-0xfd9fffff,0xfd980000-0xfd > 9bffff irq 19 at device 0.0 on pci1 > mps0: Firmware: 12.00.00.00 > mps0: IOCCapabilities: > 1285c tReplay,HostDisc> > pcib2: irq 16 at device 4.0 on pci0 > pci2: on pcib2 > em0: port 0xcf00-0xcf1f mem > 0xfd7c0 > 000-0xfd7dffff,0xfd700000-0xfd77ffff,0xfd7fc000-0xfd7fffff irq 16 at > device 0.0 > on pci2 > em0: Using MSIX interrupts with 3 vectors > em0: Ethernet address: 00:1b:21:c6:d2:a0 > pcib3: irq 17 at device 9.0 on pci0 > pci3: on pcib3 > xhci0: mem 0xfd5f8000-0xfd5fffff irq > 17 at d > evice 0.0 on pci3 > xhci0: 64 byte context size. > usbus0 on xhci0 > pcib4: irq 18 at device 10.0 on pci0 > pci4: on pcib4 > ahci0: port > 0xaf00-0xaf07,0xae00-0xae03, > 0xad00-0xad07,0xac00-0xac03,0xab00-0xab0f mem 0xfcbff000-0xfcbff1ff irq > 18 at de > vice 0.0 on pci4 > ahci0: AHCI v1.00 with 2 6Gbps ports, Port Multiplier supported with FBS > ahcich0: at channel 0 on ahci0 > ahcich1: at channel 1 on ahci0 > pcib5: irq 19 at device 11.0 on pci0 > pci5: on pcib5 > mps1: port 0x9e00-0x9eff mem > 0xfdefc000-0xfdefffff,0xfde80000-0xfd > ebffff irq 19 at device 0.0 on pci5 > mps1: Firmware: 12.00.00.00 > mps1: IOCCapabilities: > 185c > pcib6: irq 16 at device 12.0 on pci0 > pci6: on pcib6 > mps2: port 0x8e00-0x8eff mem > 0xfdcfc000-0xfdcfffff,0xfdc80000-0xfd > cbffff irq 16 at device 0.0 on pci6 > mps2: Firmware: 12.00.00.00 > mps2: IOCCapabilities: > 1285c tReplay,HostDisc> > pcib7: irq 17 at device 13.0 on pci0 > pci7: on pcib7 > vgapci0: port 0xee00-0xeeff mem > 0xd0000000-0xdfffffff,0 > xfdac0000-0xfdadffff irq 17 at device 0.0 on pci7 > hdac0: mem > 0xfdafc000-0xfdaffff > f irq 18 at device 0.1 on pci7 > ahci1: port > 0xff00-0xff07,0xfe00-0xfe03,0xfd00 > -0xfd07,0xfc00-0xfc03,0xfb00-0xfb0f mem 0xfdfff000-0xfdfff3ff irq 19 at > device 1 > 7.0 on pci0 > ahci1: AHCI v1.20 with 4 6Gbps ports, Port Multiplier supported > ahcich2: at channel 0 on ahci1 > ahcich3: at channel 1 on ahci1 > ahcich4: at channel 2 on ahci1 > ahcich5: at channel 3 on ahci1 > ohci0: mem 0xfdffe000-0xfdffefff irq 18 > at devic > e 18.0 on pci0 > usbus1: on ohci0 > ehci0: mem 0xfdffd000-0xfdffd0ff irq > 17 at d > evice 18.2 on pci0 > usbus2: EHCI version 1.0 > usbus2: on ehci0 > ohci1: mem 0xfdffc000-0xfdffcfff irq 18 > at devic > e 19.0 on pci0 > usbus3: on ohci1 > ehci1: mem 0xfdffb000-0xfdffb0ff irq > 17 at d > evice 19.2 on pci0 > usbus4: EHCI version 1.0 > usbus4: on ehci1 > pci0: at device 20.0 (no driver attached) > atapci0: port > 0x1f0-0x1f7,0x3f6,0x170-0x177, > 0x376,0xfa00-0xfa0f at device 20.1 on pci0 > ata0: at channel 0 on atapci0 > ata1: at channel 1 on atapci0 > isab0: at device 20.3 on pci0 > isa0: on isab0 > pcib8: at device 20.4 on pci0 > pci8: on pcib8 > ohci2: mem 0xfdffa000-0xfdffafff irq 18 > at devic > e 20.5 on pci0 > usbus5: on ohci2 > pcib9: at device 21.0 on pci0 > pci9: on pcib9 > re0: port > 0x6e00-0x6ef > f mem 0xfd0ff000-0xfd0fffff,0xfd0f8000-0xfd0fbfff irq 17 at device 0.0 > on pci9 > re0: Using 1 MSI-X message > re0: Chip rev. 0x2c800000 > re0: MAC rev. 0x00000000 > miibus0: on re0 > rgephy0: PHY 1 on > miibus0 > rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, > 100baseTX-FDX > , 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, > 1000baseT-FDX- > master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow > re0: Ethernet address: 50:e5:49:45:55:8e > pcib10: at device 21.1 on pci0 > pci10: on pcib10 > xhci1: mem 0xfcff8000-0xfcffffff irq > 17 at d > evice 0.0 on pci10 > xhci1: 64 byte context size. > usbus6 on xhci1 > pcib11: at device 21.2 on pci0 > pci11: on pcib11 > ahci2: port > 0x3f00-0x3f07,0x3e00-0x3e03, > 0x3d00-0x3d07,0x3c00-0x3c03,0x3b00-0x3b0f mem 0xfcdff000-0xfcdff1ff irq > 17 at de > vice 0.0 on pci11 > ahci2: AHCI v1.00 with 2 6Gbps ports, Port Multiplier supported with FBS > ahcich6: at channel 0 on ahci2 > ahcich7: at channel 1 on ahci2 > ohci3: mem 0xfdff9000-0xfdff9fff irq 18 > at devic > e 22.0 on pci0 > usbus7: on ohci3 > ehci2: mem 0xfdff8000-0xfdff80ff irq > 17 at d > evice 22.2 on pci0 > usbus8: EHCI version 1.0 > usbus8: on ehci2 > attimer0: port 0x40-0x43 on acpi0 > Timecounter "i8254" frequency 1193182 Hz quality 0 > Event timer "i8254" frequency 1193182 Hz quality 100 > hpet0: iomem 0xfed00000-0xfed003ff irq 0,8 > on acpi0 > Timecounter "HPET" frequency 14318180 Hz quality 950 > atrtc0: port 0x70-0x73 on acpi0 > Event timer "RTC" frequency 32768 Hz quality 0 > orm0: at iomem > 0xc0000-0xcffff,0xd5000-0xdafff,0xdb000-0xdbfff > on isa0 > sc0: at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on > isa0 > atkbdc0: at port 0x60,0x64 on isa0 > atkbd0: irq 1 on atkbdc0 > kbd0 at atkbd0 > atkbd0: [GIANT-LOCKED] > ppc0: cannot reserve I/O port range > hwpstate0: on cpu0 > Timecounters tick every 1.000 msec > hdac0: HDA Codec #0: ATI R6xx HDMI > pcm0: at cad 0 nid 1 on hdac0 > usbus0: 5.0Gbps Super Speed USB v3.0 > usbus1: 12Mbps Full Speed USB v1.0 > usbus2: 480Mbps High Speed USB v2.0 > usbus3: 12Mbps Full Speed USB v1.0 > usbus4: 480Mbps High Speed USB v2.0 > usbus5: 12Mbps Full Speed USB v1.0 > usbus6: 5.0Gbps Super Speed USB v3.0 > usbus7: 12Mbps Full Speed USB v1.0 > usbus8: 480Mbps High Speed USB v2.0 > ugen0.1: <0x1b6f> at usbus0 > uhub0: <0x1b6f XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on > usbus0 > ugen1.1: at usbus1 > uhub1: on usbus1 > ugen2.1: at usbus2 > uhub2: on usbus2 > ugen3.1: at usbus3 > uhub3: on usbus3 > ugen4.1: at usbus4 > uhub4: on usbus4 > ugen5.1: at usbus5 > uhub5: on usbus5 > ugen6.1: <0x1b6f> at usbus6 > uhub6: <0x1b6f XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on > usbus6 > ugen7.1: at usbus7 > uhub7: on usbus7 > ugen8.1: at usbus8 > uhub8: on usbus8 > uhub5: 2 ports with 2 removable, self powered > uhub7: 4 ports with 4 removable, self powered > uhub1: 5 ports with 5 removable, self powered > uhub3: 5 ports with 5 removable, self powered > uhub0: 4 ports with 4 removable, self powered > uhub6: 4 ports with 4 removable, self powered > uhub8: 4 ports with 4 removable, self powered > uhub2: 5 ports with 5 removable, self powered > uhub4: 5 ports with 5 removable, self powered > ugen1.2: at usbus1 > ukbd0: > on usbus1 > kbd2 at ukbd0 > uhid0: > on usbus1 > ada0 at ahcich2 bus 0 scbus5 target 0 lun 0 > ada0: ATA-8 SATA 3.x device > ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) > ada0: Command Queueing enabled > ada0: 85857MB (175836528 512 byte sectors: 16H 63S/T 16383C) > ada0: Previously was known as ad8 > ada1 at ahcich3 bus 0 scbus6 target 0 lun 0 > ada1: ATA-8 SATA 2.x device > ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) > ada1: Command Queueing enabled > ada1: 57241MB (117231408 512 byte sectors: 16H 63S/T 16383C) > ada1: Previously was known as ad10 > ada2 at ahcich4 bus 0 scbus7 target 0 lun 0 > ada2: ATA-8 SATA 2.x device > ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) > ada2: Command Queueing enabled > ada2: 953869MB (1953525168 512 byte sectors: 16H 63S/T 16383C) > ada2: Previously was known as ad12 > da7 at mps0 bus 0 scbus0 target 7 lun 0 > da7: Fixed Direct Access SCSI-6 device > da7: 300.000MB/s transfers > da7: Command Queueing enabled > da7: 2384658MB (4883781168 512 byte sectors: 255H 63S/T 304001C) > da3 at mps0 bus 0 scbus0 target 3 lun 0 > da3: Fixed Direct Access SCSI-6 device > da3: 300.000MB/s transfers > da3: Command Queueing enabled > da3: 2384658MB (4883781168 512 byte sectors: 255H 63S/T 304001C) > da0 at mps0 bus 0 scbus0 target 0 lun 0 > da0: Fixed Direct Access SCSI-6 device > da0: 300.000MB/s transfers > da0: Command Queueing enabled > da0: 2384658MB (4883781168 512 byte sectors: 255H 63S/T 304001C) > da9 at mps2 bus 0 scbus4 target 1 lun 0 > da9: Fixed Direct Access SCSI-6 device > da9: 300.000MB/s transfers > da9: Command Queueing enabled > da9: 2384658MB (4883781168 512 byte sectors: 255H 63S/T 304001C) > da10 at mps2 bus 0 scbus4 target 2 lun 0 > da10: Fixed Direct Access SCSI-6 device > da10: 300.000MB/s transfers > da10: Command Queueing enabled > da10: 2384658MB (4883781168 512 byte sectors: 255H 63S/T 304001C) > da8 at mps2 bus 0 scbus4 target 0 lun 0 > da8: Fixed Direct Access SCSI-6 device > da8: 300.000MB/s transfers > da8: Command Queueing enabled > da8: 2384658MB (4883781168 512 byte sectors: 255H 63S/T 304001C) > da11 at mps2 bus 0 scbus4 target 3 lun 0 > da11: Fixed Direct Access SCSI-6 device > da11: 300.000MB/s transfers > da11: Command Queueing enabled > da11: 2384658MB (4883781168 512 byte sectors: 255H 63S/T 304001C) > da6 at mps0 bus 0 scbus0 target 6 lun 0 > da6: Fixed Direct Access SCSI-6 device > da6: 300.000MB/s transfers > da6: Command Queueing enabled > da6: 2384658MB (4883781168 512 byte sectors: 255H 63S/T 304001C) > da4 at mps0 bus 0 scbus0 target 4 lun 0 > da4: Fixed Direct Access SCSI-6 device > da4: 300.000MB/s transfers > da4: Command Queueing enabled > da4: 2384658MB (4883781168 512 byte sectors: 255H 63S/T 304001C) > da5 at mps0 bus 0 scbus0 target 5 lun 0 > da5: Fixed Direct Access SCSI-6 device > da5: 300.000MB/s transfers > da5: Command Queueing enabled > da5: 2384658MB (4883781168 512 byte sectors: 255H 63S/T 304001C) > da1 at mps0 bus 0 scbus0 target 1 lun 0 > da1: Fixed Direct Access SCSI-6 device > da1: 300.000MB/s transfers > da1: Command Queueing enabled > da1: 2384658MB (4883781168 512 byte sectors: 255H 63S/T 304001C) > da2 at mps0 bus 0 scbus0 target 2 lun 0 > da2: Fixed Direct Access SCSI-6 device > da2: 300.000MB/s transfers > da2: Command Queueing enabled > da2: 2384658MB (4883781168 512 byte sectors: 255H 63S/T 304001C) > SMP: AP CPU #1 Launched! > SMP: AP CPU #4 Launched! > SMP: AP CPU #6 Launched! > SMP: AP CPU #5 Launched! > SMP: AP CPU #2 Launched! > SMP: AP CPU #7 Launched! > SMP: AP CPU #3 Launched! > Timecounter "TSC-low" frequency 15695275 Hz quality 1000 > Trying to mount root from ufs:/dev/gpt/disk0 [rw]... > ZFS filesystem version 5 > ZFS storage pool version 28 > > > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org"