Date: Sat, 07 Oct 2006 18:49:02 +0900 (JST) From: Jacques Garrigue <garrigue@math.nagoya-u.ac.jp> To: freebsd-acpi@freebsd.org Subject: Sony Vaio VGN-TX92S Message-ID: <20061007.184902.07645150.garrigue@math.nagoya-u.ac.jp>
next in thread | raw e-mail | index | archive | help
Hi, I've just installed FreeBSD 6.2-BETA2 on a Vaio VGN-TX92S, which is a Centrino laptop with a Core Solo U1400, ICH7 chipset. After a bit of fiddling, I can use most features: * Xorg in 1368x768 mode (nothing to do) * integrated ethernet (just had to add the board ID to if_fxp.c) * wireless (download and compile wpi-freebsd.tgz) * HDA audio (download and compile hdac driver, as snd_hda didn't compile) * USB, pccard, bluetooth (nothing to do) So I should be happy, but I have two problems. The most usual one is that it doesn't resume after suspend: acpiconf -s3 does go to sleep, but it hangs on resume. I don't know if there is an easy solution, but I would take any hint. The more unusual one is that it gets rather hot. After a few minutes, the fan starts, and never stops. The temperature reading quickly goes to 58C, and stays there, but may go to 65C under load (the machine feels actually hot.) I even got some hang-ups that look like overheat. Under windows it gets hot at times, but not that easily. Note that cpufreq seems to work: when idle, the frequency goes down to 100MHz. In case it helps, here are the results of pciconf -lv, and dmesg after a verbose boot. Cheers, Jacques Garrigue % pciconf -lv hostb0@pci0:0:0: class=0x060000 card=0x8207104d chip=0x27a08086 rev=0x03 hdr=0x00 vendor = 'Intel Corporation' class = bridge subclass = HOST-PCI none0@pci0:2:0: class=0x030000 card=0x8207104d chip=0x27a28086 rev=0x03 hdr=0x00 vendor = 'Intel Corporation' class = display subclass = VGA none1@pci0:2:1: class=0x038000 card=0x8207104d chip=0x27a68086 rev=0x03 hdr=0x00 vendor = 'Intel Corporation' class = display pcm0@pci0:27:0: class=0x040300 card=0x8207104d chip=0x27d88086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801G (ICH7 Family) High Definition Audio' class = multimedia pcib1@pci0:28:0: class=0x060400 card=0x00000040 chip=0x27d08086 rev=0x02 hdr=0x01 vendor = 'Intel Corporation' device = '82801G (ICH7 Family) PCI Express Root Port' class = bridge subclass = PCI-PCI uhci0@pci0:29:0: class=0x0c0300 card=0x8207104d chip=0x27c88086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801G (ICH7 Family) USB Universal Host Controller' class = serial bus subclass = USB uhci1@pci0:29:1: class=0x0c0300 card=0x8207104d chip=0x27c98086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801G (ICH7 Family) USB Universal Host Controller' class = serial bus subclass = USB uhci2@pci0:29:2: class=0x0c0300 card=0x8207104d chip=0x27ca8086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801G (ICH7 Family) USB Universal Host Controller' class = serial bus subclass = USB uhci3@pci0:29:3: class=0x0c0300 card=0x8207104d chip=0x27cb8086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801G (ICH7 Family) USB Universal Host Controller' class = serial bus subclass = USB ehci0@pci0:29:7: class=0x0c0320 card=0x8207104d chip=0x27cc8086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801G (ICH7 Family) USB 2.0 Enhanced Host Controller' class = serial bus subclass = USB pcib2@pci0:30:0: class=0x060401 card=0x00000050 chip=0x24488086 rev=0xe2 hdr=0x01 vendor = 'Intel Corporation' device = '82801BAM/CAM/DBM (ICH2-M/3-M/4-M) Hub Interface to PCI Bridge' class = bridge subclass = PCI-PCI isab0@pci0:31:0: class=0x060100 card=0x8207104d chip=0x27b98086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801GBM (ICH7-M) LPC Interface Controller' class = bridge subclass = PCI-ISA atapci0@pci0:31:1: class=0x01018a card=0x8207104d chip=0x27df8086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801G (ICH7 Family) Ultra ATA Storage Controller' class = mass storage subclass = ATA none2@pci0:31:3: class=0x0c0500 card=0x8207104d chip=0x27da8086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801G (ICH7 Family) SMBus Controller' class = serial bus subclass = SMBus wpi0@pci2:0:0: class=0x028000 card=0x10538086 chip=0x42228086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' class = network cbb0@pci6:4:0: class=0x060700 card=0x8207104d chip=0x8039104c rev=0x00 hdr=0x02 vendor = 'Texas Instruments (TI)' class = bridge subclass = PCI-CardBus fwohci0@pci6:4:1: class=0x0c0010 card=0x8207104d chip=0x803a104c rev=0x00 hdr=0x00 vendor = 'Texas Instruments (TI)' class = serial bus subclass = FireWire none3@pci6:4:2: class=0x018000 card=0x8207104d chip=0x803b104c rev=0x00 hdr=0x00 vendor = 'Texas Instruments (TI)' class = mass storage fxp0@pci6:8:0: class=0x020000 card=0x8207104d chip=0x10938086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' class = network subclass = ethernet dmesg: Copyright (c) 1992-2006 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 6.2-BETA2 #0: Thu Oct 5 09:05:35 JST 2006 root@:/usr/src/sys/i386/compile/MARIE Preloaded elf kernel "/boot/kernel/kernel" at 0xc083c000. Preloaded elf module "/boot/kernel/umodem.ko" at 0xc083c228. Preloaded elf module "/boot/kernel/ucom.ko" at 0xc083c2d4. Preloaded elf module "/boot/kernel/acpi_video.ko" at 0xc083c380. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc083c430. Preloaded elf module "/boot/kernel/acpi_sony.ko" at 0xc083c4dc. Preloaded elf module "/boot/kernel/firmware.ko" at 0xc083c58c. Preloaded elf module "/boot/kernel/hdac.ko" at 0xc083c63c. Preloaded elf module "/boot/kernel/sound.ko" at 0xc083c6e8. Preloaded elf module "/boot/kernel/cpufreq.ko" at 0xc083c794. Preloaded elf module "/boot/kernel/ng_ubt.ko" at 0xc083c840. Preloaded elf module "/boot/kernel/netgraph.ko" at 0xc083c8ec. MP Configuration Table version 1.4 found at 0xc009fd71 Table 'FACP' at 0x1f692dec Table 'APIC' at 0x1f692e70 MADT: Found table at 0x1f692e70 APIC: Using the MADT enumerator. MADT: Found CPU APIC ID 0 ACPI ID 0: enabled MADT: Found CPU APIC ID 1 ACPI ID 1: disabled ACPI APIC Table: <Sony N3> Calibrating clock(s) ... i8254 clock: 1193190 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 1197012303 Hz CPU: Genuine Intel(R) CPU U1400 @ 1.20GHz (1197.01-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x6e8 Stepping = 8 Features=0xafe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE> Features2=0xc1a9<SSE3,MON,VMX,EST,TM2,<b14>,<b15>> AMD Features=0x100000<NX> real memory = 526909440 (502 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000000c25000 - 0x000000001ed66fff, 504635392 bytes (123202 pages) avail memory = 506208256 (482 MB) bios32: Found BIOS32 Service Directory header at 0xc00f63f0 bios32: Entry = 0xfd5b0 (c00fd5b0) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xfd5b0+0x273 pnpbios: Found PnP BIOS data at 0xc00f6450 pnpbios: Entry = f0000:8605 Rev = 1.0 Other BIOS signatures found: APIC: CPU 0 has ACPI ID 0 MADT: Found IO APIC ID 1, Interrupt 0 at 0xfec00000 ioapic0: Routing external 8259A's -> intpin 0 ioapic0: intpin 0 -> ExtINT (edge, high) ioapic0: intpin 1 -> ISA IRQ 1 (edge, high) ioapic0: intpin 2 -> ISA IRQ 2 (edge, high) ioapic0: intpin 3 -> ISA IRQ 3 (edge, high) ioapic0: intpin 4 -> ISA IRQ 4 (edge, high) ioapic0: intpin 5 -> ISA IRQ 5 (edge, high) ioapic0: intpin 6 -> ISA IRQ 6 (edge, high) ioapic0: intpin 7 -> ISA IRQ 7 (edge, high) ioapic0: intpin 8 -> ISA IRQ 8 (edge, high) ioapic0: intpin 9 -> ISA IRQ 9 (edge, high) ioapic0: intpin 10 -> ISA IRQ 10 (edge, high) ioapic0: intpin 11 -> ISA IRQ 11 (edge, high) ioapic0: intpin 12 -> ISA IRQ 12 (edge, high) ioapic0: intpin 13 -> ISA IRQ 13 (edge, high) ioapic0: intpin 14 -> ISA IRQ 14 (edge, high) ioapic0: intpin 15 -> ISA IRQ 15 (edge, high) ioapic0: intpin 16 -> PCI IRQ 16 (level, low) ioapic0: intpin 17 -> PCI IRQ 17 (level, low) ioapic0: intpin 18 -> PCI IRQ 18 (level, low) ioapic0: intpin 19 -> PCI IRQ 19 (level, low) ioapic0: intpin 20 -> PCI IRQ 20 (level, low) ioapic0: intpin 21 -> PCI IRQ 21 (level, low) ioapic0: intpin 22 -> PCI IRQ 22 (level, low) ioapic0: intpin 23 -> PCI IRQ 23 (level, low) MADT: Interrupt override: source 0, irq 2 ioapic0: Routing IRQ 0 -> intpin 2 ioapic0: intpin 2 trigger: edge ioapic0: intpin 2 polarity: high MADT: Interrupt override: source 9, irq 9 ioapic0: intpin 9 trigger: level ioapic0: intpin 9 polarity: high lapic0: Routing NMI -> LINT1 lapic0: LINT1 trigger: edge lapic0: LINT1 polarity: high MADT: Ignoring local NMI routed to ACPI CPU 1 ioapic0 <Version 2.0> irqs 0-23 on motherboard cpu0 BSP: ID: 0x00000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000 io: <I/O> random: <entropy source, Software, Yarrow> kbd: new array size 4 kbd1 at kbdmux0 mem: <memory> Pentium Pro MTRR support enabled null: <null device, zero device> npx0: INT 16 interface acpi0: <Sony> on motherboard ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48 acpi0: [MPSAFE] pci_open(1): mode 1 addr port (0x0cf8) is 0x8000f920 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=27a08086) pcibios: BIOS version 2.10 Found $PIR table, 20 entries at 0xc00fde80 PCI-Only Interrupts: none Location Bus Device Pin Link IRQs embedded 0 0 A 0x60 10 embedded 0 0 B 0x61 10 embedded 0 0 C 0x62 10 embedded 0 0 D 0x63 10 embedded 0 7 A 0x60 10 embedded 0 1 A 0x60 10 embedded 0 1 B 0x61 10 slot 6 1 0 A 0x60 10 slot 6 1 0 B 0x61 10 slot 6 1 0 C 0x62 10 slot 6 1 0 D 0x63 10 embedded 0 2 A 0x60 10 embedded 0 2 B 0x61 10 embedded 0 27 A 0x63 10 embedded 0 28 A 0x60 10 embedded 0 28 B 0x61 10 embedded 0 28 C 0x62 10 embedded 0 28 D 0x63 10 slot 7 2 0 A 0x60 10 slot 7 2 0 B 0x61 10 slot 7 2 0 C 0x62 10 slot 7 2 0 D 0x63 10 slot 8 255 0 A 0x61 10 slot 8 255 0 B 0x62 10 slot 8 255 0 C 0x63 10 slot 8 255 0 D 0x60 10 slot 9 255 0 A 0x62 10 slot 9 255 0 B 0x63 10 slot 9 255 0 C 0x60 10 slot 9 255 0 D 0x61 10 slot 10 255 0 A 0x63 10 slot 10 255 0 B 0x60 10 slot 10 255 0 C 0x61 10 slot 10 255 0 D 0x62 10 slot 11 255 0 A 0x60 10 slot 11 255 0 B 0x61 10 slot 11 255 0 C 0x62 10 slot 11 255 0 D 0x63 10 slot 12 255 0 A 0x61 10 slot 12 255 0 B 0x62 10 slot 12 255 0 C 0x63 10 slot 12 255 0 D 0x60 10 embedded 0 29 A 0x61 10 embedded 0 29 B 0x63 10 embedded 0 29 C 0x69 10 embedded 0 29 D 0x6b 10 embedded 0 30 A 0x6a 10 embedded 0 30 B 0x68 10 slot 1 6 4 A 0x68 10 slot 1 6 4 B 0x69 10 slot 1 6 4 C 0x6a 10 slot 1 6 4 D 0x6b 10 embedded 6 5 A 0x62 10 embedded 6 5 C 0x68 10 embedded 6 5 D 0x6b 10 embedded 6 8 A 0x68 10 slot 2 6 11 A 0x61 10 slot 2 6 11 B 0x62 10 embedded 0 31 B 0x6a 10 acpi_bus_number: root bus has no _BBN, assuming 0 acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR AcpiOsDerivePciId: bus 6 dev 4 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR AcpiOsDerivePciId: bus 0 dev 31 func 0 acpi0: wakeup code va 0xcd37a000 pa 0x9e000 acpi_bus_number: root bus has no _BBN, assuming 0 acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR AcpiOsDerivePciId: bus 0 dev 0 func 0 ACPI timer: 0/3 0/3 0/3 0/3 0/3 0/3 0/3 0/3 0/3 0/3 -> 0 Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 acpi_ec0: <Embedded Controller: GPE 0x17> port 0x62,0x66 on acpi0 pci_link0: Links after initial probe: Index IRQ Rtd Ref IRQs 0 10 N 0 10 pci_link0: Links after initial validation: Index IRQ Rtd Ref IRQs 0 10 N 0 10 pci_link0: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 10 pci_link1: Links after initial probe: Index IRQ Rtd Ref IRQs 0 10 N 0 10 pci_link1: Links after initial validation: Index IRQ Rtd Ref IRQs 0 10 N 0 10 pci_link1: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 10 pci_link2: Links after initial probe: Index IRQ Rtd Ref IRQs 0 255 N 0 10 pci_link2: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 10 pci_link2: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 10 pci_link3: Links after initial probe: Index IRQ Rtd Ref IRQs 0 10 N 0 10 pci_link3: Links after initial validation: Index IRQ Rtd Ref IRQs 0 10 N 0 10 pci_link3: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 10 pci_link4: Links after initial probe: Index IRQ Rtd Ref IRQs 0 10 N 0 10 pci_link4: Links after initial validation: Index IRQ Rtd Ref IRQs 0 10 N 0 10 pci_link4: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 10 pci_link5: Links after initial probe: Index IRQ Rtd Ref IRQs 0 10 N 0 10 pci_link5: Links after initial validation: Index IRQ Rtd Ref IRQs 0 10 N 0 10 pci_link5: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 10 pci_link6: Links after initial probe: Index IRQ Rtd Ref IRQs 0 10 N 0 10 pci_link6: Links after initial validation: Index IRQ Rtd Ref IRQs 0 10 N 0 10 pci_link6: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 10 pci_link7: Links after initial probe: Index IRQ Rtd Ref IRQs 0 10 N 0 10 pci_link7: Links after initial validation: Index IRQ Rtd Ref IRQs 0 10 N 0 10 pci_link7: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 10 cpu0: <ACPI CPU> on acpi0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 p4tcc0: <CPU Frequency Thermal Control> on cpu0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: physical bus=0 found-> vendor=0x8086, dev=0x27a0, revid=0x03 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x2090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x27a2, revid=0x03 bus=0, slot=2, func=0 class=03-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 MSI supports 1 message map[10]: type 1, range 32, base d4100000, size 19, enabled map[14]: type 4, range 32, base 00001800, size 3, enabled map[18]: type 3, range 32, base c0000000, size 28, enabled map[1c]: type 1, range 32, base d4200000, size 18, enabled pcib0: matched entry for 0.2.INTA pcib0: slot 2 INTA hardwired to IRQ 16 found-> vendor=0x8086, dev=0x27a6, revid=0x03 bus=0, slot=2, func=1 class=03-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 map[10]: type 1, range 32, base d4180000, size 19, enabled found-> vendor=0x8086, dev=0x27d8, revid=0x02 bus=0, slot=27, func=0 class=04-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type 1, range 64, base d4240000, size 14, enabled pcib0: matched entry for 0.27.INTA pcib0: slot 27 INTA hardwired to IRQ 19 found-> vendor=0x8086, dev=0x27d0, revid=0x02 bus=0, slot=28, func=0 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 pcib0: matched entry for 0.28.INTA pcib0: slot 28 INTA hardwired to IRQ 16 found-> vendor=0x8086, dev=0x27c8, revid=0x02 bus=0, slot=29, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 map[20]: type 4, range 32, base 00001820, size 5, enabled pcib0: matched entry for 0.29.INTA pcib0: slot 29 INTA hardwired to IRQ 17 found-> vendor=0x8086, dev=0x27c9, revid=0x02 bus=0, slot=29, func=1 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=10 map[20]: type 4, range 32, base 00001840, size 5, enabled pcib0: matched entry for 0.29.INTB pcib0: slot 29 INTB hardwired to IRQ 19 found-> vendor=0x8086, dev=0x27ca, revid=0x02 bus=0, slot=29, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=10 map[20]: type 4, range 32, base 00001860, size 5, enabled pcib0: matched entry for 0.29.INTC pcib0: slot 29 INTC hardwired to IRQ 21 found-> vendor=0x8086, dev=0x27cb, revid=0x02 bus=0, slot=29, func=3 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 map[20]: type 4, range 32, base 00001880, size 5, enabled pcib0: matched entry for 0.29.INTA pcib0: slot 29 INTA hardwired to IRQ 17 found-> vendor=0x8086, dev=0x27cc, revid=0x02 bus=0, slot=29, func=7 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=10 powerspec 2 supports D0 D3 current D0 map[10]: type 1, range 32, base d4444000, size 10, enabled pcib0: matched entry for 0.29.INTD pcib0: slot 29 INTD hardwired to IRQ 23 found-> vendor=0x8086, dev=0x2448, revid=0xe2 bus=0, slot=30, func=0 class=06-04-01, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x27b9, revid=0x02 bus=0, slot=31, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x27df, revid=0x02 bus=0, slot=31, func=1 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=255 map[20]: type 4, range 32, base 00001810, size 4, enabled found-> vendor=0x8086, dev=0x27da, revid=0x02 bus=0, slot=31, func=3 class=0c-05-00, hdrtype=0x00, mfdev=0 cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[20]: type 4, range 32, base 000018a0, size 5, enabled pci0: <display, VGA> at device 2.0 (no driver attached) pci0: <display> at device 2.1 (no driver attached) pcm0: <Intel 82801G High Definition Audio Controller> mem 0xd4240000-0xd4243fff irq 19 at device 27.0 on pci0 init 0xc32ee280 pcm0: sndbuf_setmap 1cc000, 1000; 0xc32f8000 -> 1cc000 pcm0: Reserved 0x4000 bytes for rid 0x10 type 3 at 0xd4240000 ioapic0: routing intpin 19 (PCI IRQ 19) to vector 49 pcm0: [MPSAFE] pcm0: Output Streams: 4, Input Streams: 4, Bidirectional Streams: 0 pcm0: CORB Size: 256, RIRB Size: 256 pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 pcib1: secondary bus 2 pcib1: subordinate bus 5 pcib1: I/O decode 0x2000-0x2fff pcib1: memory decode 0xd2000000-0xd3ffffff pcib1: prefetched decode 0xd0000000-0xd1ffffff pci2: <ACPI PCI bus> on pcib1 pci2: physical bus=2 found-> vendor=0x8086, dev=0x4222, revid=0x02 bus=2, slot=0, func=0 class=02-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type 1, range 32, base d2000000, size 12, enabled pcib1: (null) requested memory range 0xd2000000-0xd2000fff: good pcib1: matched entry for 2.0.INTA pcib1: slot 0 INTA hardwired to IRQ 16 pci2: <network> at device 0.0 (no driver attached) uhci0: <UHCI (generic) USB controller> port 0x1820-0x183f irq 17 at device 29.0 on pci0 uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1820 ioapic0: routing intpin 17 (PCI IRQ 17) to vector 50 uhci0: [GIANT-LOCKED] usb0: <UHCI (generic) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <UHCI (generic) USB controller> port 0x1840-0x185f irq 19 at device 29.1 on pci0 uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1840 uhci1: [GIANT-LOCKED] usb1: <UHCI (generic) USB controller> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <UHCI (generic) USB controller> port 0x1860-0x187f irq 21 at device 29.2 on pci0 uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1860 ioapic0: routing intpin 21 (PCI IRQ 21) to vector 51 uhci2: [GIANT-LOCKED] usb2: <UHCI (generic) USB controller> on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhci3: <UHCI (generic) USB controller> port 0x1880-0x189f irq 17 at device 29.3 on pci0 uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1880 uhci3: [GIANT-LOCKED] usb3: <UHCI (generic) USB controller> on uhci3 usb3: USB revision 1.0 uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xd4444000-0xd44443ff irq 23 at device 29.7 on pci0 ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xd4444000 ioapic0: routing intpin 23 (PCI IRQ 23) to vector 52 ehci0: [GIANT-LOCKED] usb4: EHCI version 1.0 usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 usb4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0 usb4: USB revision 2.0 uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub4: 8 ports with 8 removable, self powered pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pcib2: secondary bus 6 pcib2: subordinate bus 7 pcib2: I/O decode 0x3000-0x3fff pcib2: memory decode 0xd4000000-0xd40fffff pcib2: prefetched decode 0xfff00000-0xfffff pcib2: Subtractively decoded bridge. pci6: <ACPI PCI bus> on pcib2 pci6: physical bus=6 found-> vendor=0x104c, dev=0x8039, revid=0x00 bus=6, slot=4, func=0 class=06-07-00, hdrtype=0x02, mfdev=1 cmdreg=0x0007, statreg=0x0210, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x40 (16000 ns), maxlat=0x03 (750 ns) intpin=a, irq=255 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base 00000000, size 12, enabled found-> vendor=0x104c, dev=0x803a, revid=0x00 bus=6, slot=4, func=1 class=0c-00-10, hdrtype=0x00, mfdev=1 cmdreg=0x0016, statreg=0x0210, cachelnsz=16 (dwords) lattimer=0x20 (960 ns), mingnt=0x03 (750 ns), maxlat=0x04 (1000 ns) intpin=b, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base d4006000, size 11, enabled pcib2: (null) requested memory range 0xd4006000-0xd40067ff: good map[14]: type 1, range 32, base d4000000, size 14, enabled pcib2: (null) requested memory range 0xd4000000-0xd4003fff: good pcib2: matched entry for 6.4.INTB pcib2: slot 4 INTB hardwired to IRQ 21 found-> vendor=0x104c, dev=0x803b, revid=0x00 bus=6, slot=4, func=2 class=01-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0210, cachelnsz=16 (dwords) lattimer=0x39 (1710 ns), mingnt=0x07 (1750 ns), maxlat=0x04 (1000 ns) intpin=c, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base d4004000, size 12, enabled pcib2: (null) requested memory range 0xd4004000-0xd4004fff: good pcib2: matched entry for 6.4.INTC pcib2: slot 4 INTC hardwired to IRQ 22 found-> vendor=0x8086, dev=0x1093, revid=0x02 bus=6, slot=8, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0017, statreg=0x0290, cachelnsz=16 (dwords) lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns) intpin=a, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base d4005000, size 12, enabled pcib2: (null) requested memory range 0xd4005000-0xd4005fff: good map[14]: type 4, range 32, base 00003000, size 6, enabled pcib2: (null) requested I/O range 0x3000-0x303f: in range pcib2: matched entry for 6.8.INTA pcib2: slot 8 INTA hardwired to IRQ 20 cbb0: <PCI-CardBus Bridge> at device 4.0 on pci6 pcib2: cbb0 requested memory range 0xd4000000-0xd40fffff: good cbb0: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0xd4007000 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 pcib2: matched entry for 6.4.INTA pcib2: slot 4 INTA hardwired to IRQ 20 ioapic0: routing intpin 20 (PCI IRQ 20) to vector 53 cbb0: [MPSAFE] cbb0: PCI Configuration space: 0x00: 0x8039104c 0x02100007 0x06070000 0x00824010 0x10: 0xd4007000 0x020000a0 0x40070706 0xfffff000 0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 0x30: 0x00000000 0xfffffffc 0x00000000 0x07400114 0x40: 0x8207104d 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x08449060 0x84d30019 0x000f0000 0x01a21b22 0x90: 0x606400c0 0x00000000 0x00000000 0x00000000 0xa0: 0xfe120001 0x00c00000 0x00000000 0x00000000 0xb0: 0x08000000 0x00000000 0x00000000 0x00000000 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0x39022113 0x10019727 0x00000000 0x00000000 fwohci0: vendor=104c, dev=803a fwohci0: vendor=104c, dev=803a fwohci0: <1394 Open Host Controller Interface> mem 0xd4006000-0xd40067ff,0xd4000000-0xd4003fff irq 21 at device 4.1 on pci6 fwohci0: Reserved 0x800 bytes for rid 0x10 type 3 at 0xd4006000 fwohci0: [MPSAFE] fwohci0: OHCI version 1.10 (ROM=1) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 08:00:46:03:02:27:29:c9 fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 fwohci0: Initiate bus reset fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) pci6: <mass storage> at device 4.2 (no driver attached) fxp0: <Intel Pro/100 VM Network Connection> port 0x3000-0x303f mem 0xd4005000-0xd4005fff irq 20 at device 8.0 on pci6 fxp0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xd4005000 fxp0: using memory space register mapping fxp0: PCI IDs: 8086 1093 104d 8207 0002 fxp0: Dynamic Standby mode is enabled miibus0: <MII bus> on fxp0 inphy0: <i82562EM 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp0: bpf attached fxp0: Ethernet address: 00:13:a9:40:b8:92 fxp0: [MPSAFE] isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH7 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1810-0x181f at device 31.1 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x1810 ata0: <ATA channel 0> on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=50 ostat1=50 ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata0: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb ata0: reset tp2 stat0=50 stat1=00 devices=0x9<ATAPI_SLAVE,ATA_MASTER> ioapic0: routing intpin 14 (ISA IRQ 14) to vector 54 ata0: [MPSAFE] ata1: <ATA channel 1> on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=00 ostat0=ff ostat1=ff ioapic0: routing intpin 15 (ISA IRQ 15) to vector 55 ata1: [MPSAFE] pci0: <serial bus, SMBus> at device 31.3 (no driver attached) acpi_tz0: <Thermal Zone> on acpi0 acpi_tz1: <Thermal Zone> on acpi0 acpi_tz2: <Thermal Zone> on acpi0 acpi_sony0: <Sony notebook controller> on acpi0 acpi_sony0: PID 0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 ioapic0: routing intpin 1 (ISA IRQ 1) to vector 56 atkbd0: [GIANT-LOCKED] psm0: unable to allocate IRQ psmcpnp0: <PS/2 mouse port> irq 12 on acpi0 psm0: current command byte:0047 psm0: <PS/2 Mouse> irq 12 on atkbdc0 ioapic0: routing intpin 12 (ISA IRQ 12) to vector 57 psm0: [GIANT-LOCKED] psm0: model GlidePoint, device ID 0-00, 2 buttons psm0: config:00000000, flags:00000008, packet size:3 psm0: syncmask:c0, syncbits:00 battery0: <ACPI Control Method Battery> on acpi0 acpi_acad0: <AC Adapter> on acpi0 ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it pnp_identify: Trying Read_Port at 203 pnp_identify: Trying Read_Port at 243 pnp_identify: Trying Read_Port at 283 pnp_identify: Trying Read_Port at 2c3 pnp_identify: Trying Read_Port at 303 pnp_identify: Trying Read_Port at 343 pnp_identify: Trying Read_Port at 383 pnp_identify: Trying Read_Port at 3c3 PNP Identify complete isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices pmtimer0 on isa0 orm0: <ISA Option ROMs> at iomem 0xc0000-0xcffff,0xdc000-0xdffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd1, terminal emulator: sc (syscons terminal) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0 fe0: not probed (disabled) ie0: not probed (disabled) lnc0: not probed (disabled) ppc0 failed to probe at irq 7 on isa0 sio0: not probed (disabled) sio1: not probed (disabled) sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vt0: not probed (disabled) isa_probe_children: probing PnP devices ubt0: ALPS UGX, rev 2.00/19.15, addr 2 ubt0: ALPS UGX, rev 2.00/19.15, addr 2 ubt0: Interface 0 endpoints: interrupt=0x81, bulk-in=0x82, bulk-out=0x2 ubt0: Interface 1 (alt.config 5) endpoints: isoc-in=0x83, isoc-out=0x3; wMaxPacketSize=49; nframes=6, buffer size=294 ugen0: vendor 0x054c product 0x01bb, rev 2.00/1.28, addr 3 Device configuration finished. procfs registered lapic: Divisor 2, Frequency 66500344 hz Timecounter "TSC" frequency 1197012303 Hz quality 800 Timecounters tick every 1.000 msec lo0: bpf attached ata0-slave: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire battery0: battery initialization start ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire ad0: setting PIO4 on ICH7 chip ad0: setting UDMA100 on ICH7 chip ad0: 57231MB <TOSHIBA MK6006GAH BZ002A> at ata0-master UDMA100 ad0: 117210240 sectors [116280C/16H/63S] 16 sectors/interrupt 1 depth queue GEOM: new disk ad0 acpi_acad0: acline initialization start battery0: battery initialization done, tried 1 times acpi_acad0: On Line acpi_acad0: acline initialization done, tried 1 times ad0: Intel check1 failed ad0: Adaptec check1 failed ad0: LSI (v3) check1 failed ad0: LSI (v2) check1 failed ad0: FreeBSD check1 failed acd0: setting PIO4 on ICH7 chip acd0: setting UDMA33 on ICH7 chip acd0: <UJDA775 DVD/CDRW/1.50> CDRW drive at ata0 as slave acd0: read 4134KB/s (4134KB/s) write 4134KB/s (4134KB/s), 2048KB buffer, UDMA33 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet acd0: Writes: CDR, CDRW, test write, burnproof acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc pcm0: Vendor info: 10ec0262 10ec 262 1 0 1 pcm0: Vendor info: 14f12bfa 14f1 2bfa 0 0 2 pcm0: <audio> at device 0:1 (no driver attached) pcm0: <modem> at device 1:2 (no driver attached) pcm0: PW 0 pcm0: start: 2 endnode: 37 pcm0: node 2 type 0 cap 11 pcm0: Config 2f1c00 pcm0: Cap 11 sf e0560 st 1 pcm0: Set 0:2 10 pcm0: sorbo_conf_output: codec: 0 node: 2 pcm0: node 3 type 0 cap 11 pcm0: Config 3f1c00 pcm0: Cap 11 sf e0560 st 1 pcm0: Set 0:3 10 pcm0: sorbo_conf_output: codec: 0 node: 3 pcm0: node 4 type f cap f00000 pcm0: node 5 type f cap f00000 pcm0: node 6 type 0 cap 211 pcm0: Config 6f1c00 pcm0: Cap 211 sf 1e0560 st 1 pcm0: Set 0:6 10 pcm0: sorbo_conf_output: codec: 0 node: 6 pcm0: node 7 type 1 cap 10011b pcm0: node 8 type 1 cap 10011b pcm0: node 9 type 1 cap 10011b pcm0: node 10 type 1 cap 100391 pcm0: node 11 type 2 cap 20010b pcm0: node 12 type 2 cap 20010f pcm0: node 13 type 2 cap 20010f pcm0: node 14 type 2 cap 20010e pcm0: node 15 type f cap f00000 pcm0: node 16 type f cap f00000 pcm0: node 17 type f cap f00000 pcm0: node 18 type f cap f00000 pcm0: node 19 type f cap f00000 pcm0: node 20 type 4 cap 40018f pcm0: nid 20 entries 2 list d0c cur 0 ctr 65 cap 3e s 0 pcm0: AMP ni 20 rc 80 pcm0: node 21 type 4 cap 40018f pcm0: nid 21 entries 2 list d0c cur 1 ctr 65 cap 3e s 0 pcm0: AMP ni 21 rc 80 pcm0: node 22 type 4 cap 40010c pcm0: nid 22 entries 1 list e cur 0 ctr 45 cap 10 s 0 pcm0: AMP ni 22 rc 80 pcm0: node 23 type f cap f00000 pcm0: node 24 type 4 cap 40018f pcm0: nid 24 entries 2 list d0c cur 0 ctr 65 cap 173e s 0 pcm0: AMP ni 24 rc 80 pcm0: node 25 type 4 cap 40018f pcm0: nid 25 entries 2 list d0c cur 0 ctr 65 cap 173e s 0 pcm0: AMP ni 25 rc 80 pcm0: node 26 type 4 cap 40018f pcm0: nid 26 entries 2 list d0c cur 0 ctr 65 cap 173e s 0 pcm0: AMP ni 26 rc 80 pcm0: node 27 type 4 cap 40018f pcm0: nid 27 entries 2 list d0c cur 0 ctr 65 cap 173e s 0 pcm0: AMP ni 27 rc 80 pcm0: node 28 type 4 cap 400001 pcm0: nid 28 entries 0 list 0 cur 0 ctr 45 cap 20 s 0 pcm0: AMP ni 28 rc 0 pcm0: node 29 type 4 cap 400000 pcm0: nid 29 entries 0 list 0 cur 0 ctr 45 cap 20 s 0 pcm0: AMP ni 29 rc 0 pcm0: node 30 type 4 cap 400380 pcm0: nid 30 entries 1 list 6 cur 0 ctr 45 cap 10 s 0 pcm0: AMP ni 30 rc 0 pcm0: node 31 type 4 cap 400280 pcm0: nid 31 entries 0 list 0 cur 0 ctr 45 cap 20 s 0 pcm0: AMP ni 31 rc 0 pcm0: node 32 type f cap f00040 pcm0: node 33 type 6 cap 600080 pcm0: node 34 type 2 cap 20010f pcm0: node 35 type 2 cap 20010f pcm0: node 36 type 2 cap 20010f ATA PseudoRAID loaded Trying to mount root from ufs:/dev/ad0s3a start_init: trying /sbin/init Linux ELF exec handler installed wlan: <802.11 Link Layer> pci0: driver added found-> vendor=0x8086, dev=0x27a2, revid=0x03 bus=0, slot=2, func=0 class=03-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=16 powerspec 2 supports D0 D3 current D0 MSI supports 1 message pci0:2:0: reprobing on driver added found-> vendor=0x8086, dev=0x27a6, revid=0x03 bus=0, slot=2, func=1 class=03-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 pci0:2:1: reprobing on driver added found-> vendor=0x8086, dev=0x27da, revid=0x02 bus=0, slot=31, func=3 class=0c-05-00, hdrtype=0x00, mfdev=0 cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) pci0:31:3: reprobing on driver added pci2: driver added found-> vendor=0x8086, dev=0x4222, revid=0x02 bus=2, slot=0, func=0 class=02-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=16 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit pci2:0:0: reprobing on driver added wpi0: <Intel(R) PRO/Wireless 3945ABG> mem 0xd2000000-0xd2000fff irq 16 at device 0.0 on pci2 wpi0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xd2000000 bus_dmamem_alloc failed to align memory properly.bus_dmamem_alloc failed to align memory properly.bus_dmamem_alloc failed to align memory properly.bus_dmamem_alloc failed to align memory properly.bus_dmamem_alloc failed to align memory properly.bus_dmamem_alloc failed to align memory properly.bus_dmamem_alloc failed to align memory properly.channel 1 pwr1 0x0062 pwr2 0x0061 channel 2 pwr1 0x005f pwr2 0x0062 channel 3 pwr1 0x0080 pwr2 0x007f channel 4 pwr1 0x007e pwr2 0x0080 channel 5 pwr1 0x0000 pwr2 0x0000 channel 6 pwr1 0x007a pwr2 0x007b channel 7 pwr1 0x007a pwr2 0x007b channel 8 pwr1 0x0075 pwr2 0x0078 channel 9 pwr1 0x0077 pwr2 0x0075 channel 10 pwr1 0x0000 pwr2 0x0000 channel 11 pwr1 0x0001 pwr2 0x0001 channel 12 pwr1 0x0001 pwr2 0x0001 channel 13 pwr1 0x0001 pwr2 0x0001 channel 14 pwr1 0x0001 pwr2 0x0001 wpi0: bpf attached wpi0: Ethernet address: 00:18:de:09:7a:ad wpi0: bpf attached wpi0: bpf attached ioapic0: routing intpin 16 (PCI IRQ 16) to vector 58 wpi0: [MPSAFE] wpi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps wpi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps pci6: driver added found-> vendor=0x104c, dev=0x803b, revid=0x00 bus=6, slot=4, func=2 class=01-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0210, cachelnsz=16 (dwords) lattimer=0x39 (1710 ns), mingnt=0x07 (1750 ns), maxlat=0x04 (1000 ns) intpin=c, irq=22 powerspec 2 supports D0 D1 D2 D3 current D0 pci6:4:2: reprobing on driver added setting h/w config 1200 microcode alive notification version 10d00 alive 1 temperature -178 scan finished config chan 11 flags 8005 cck f ofdm 15 config chan 11 flags 8015 wpi0: link state changed to UP
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20061007.184902.07645150.garrigue>