From owner-freebsd-stable Fri Nov 24 8: 5:39 2000 Delivered-To: freebsd-stable@freebsd.org Received: from mail2.bna.bellsouth.net (mail2.bna.bellsouth.net [205.152.150.14]) by hub.freebsd.org (Postfix) with ESMTP id 438F537B4CF for ; Fri, 24 Nov 2000 08:05:28 -0800 (PST) Received: from planetwe.com (adsl-63-164-15.bna.bellsouth.net [208.63.164.15]) by mail2.bna.bellsouth.net (3.3.5alt/0.75.2) with ESMTP id LAA21255 for ; Fri, 24 Nov 2000 11:05:26 -0500 (EST) Message-ID: <3A1E91B6.3040807@planetwe.com> Date: Fri, 24 Nov 2000 10:05:10 -0600 From: Drew Sanford User-Agent: Mozilla/5.0 (X11; U; Linux 2.2.12 i386; en-US; m18) Gecko/20001107 Netscape6/6.0 X-Accept-Language: en MIME-Version: 1.0 To: stable@freebsd.org Subject: Update - 4.2 install hangs while booting Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG I have had a chance to play with 4.2 now, having gotten it installed, and narrowed down some of the hardware problems that it could be. Here's a system rundown: Asus A7V rev 1.02; Duron 800 SBLive NetGear FA 310Tx 45 GB ATA100 IBM Deskstar as Master on Primary ATA100 32x ATAPI cd rom drive as Slave on Primary UDM33/66 When I boot the system with the Parallel port enabled in the bios, regardless of the specified IRQ or IO port in bios, I get this: ppc0: at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold ppbus0: IEEE1284 device found /NIBBLE/ECP Probing for PnP devices on ppbus0: ppbus0: MLC, PCL, PML lpt0: on ppbus0 lpt0: Interupt-driven port ppi0: on ppbus0 and here the system will hang, for at least 25 minutes. Beyond that I figured it was usless to wait and see if anything would happen, and I lost pateince besides. Here's the dmesg output for the same system, same kernel, but with the parallel port disabled in the bios: lauasanf@colossus(~)$ dmesg Copyright (c) 1992-2000 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.2-RELEASE #3: Thu Nov 23 20:51:12 CST 2000 lauasanf@colossus.cotharyus.net:/usr/src/sys/compile/Colossus Timecounter "i8254" frequency 1193182 Hz Timecounter "TSC" frequency 807193223 Hz CPU: AMD Athlon(tm) Processor (807.19-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x630 Stepping = 0 Features=0x183f9ff AMD Features=0xc0440000<,AMIE,DSP,3DNow!> real memory = 268353536 (262064K bytes) avail memory = 257773568 (251732K bytes) Preloaded elf kernel "kernel" at 0xc037c000. Pentium Pro MTRR support enabled md0: Malloc disk npx0: on motherboard npx0: INT 16 interface pcib0: on motherboard pci0: on pcib0 pcib2: at device 1.0 on pci0 pci1: on pcib2 pci1: at 0.0 irq 11 isab0: at device 4.0 on pci0 isa0: on isab0 atapci0: port 0xd800-0xd80f at device 4.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 uhci0: port 0xd400-0xd41f irq 5 at device 4.2 on pci0 usb0: on uhci0 usb0: USB revision 1.0 uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: port 0xd000-0xd01f irq 5 at device 4.3 on pci0 usb1: on uhci1 usb1: USB revision 1.0 uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhub2: ALCOR Generic USB Hub, class 9/0, rev 1.10/1.00, addr 2 uhub2: 4 ports with 4 removable, self powered dc0: <82c169 PNIC 10/100BaseTX> port 0xa400-0xa4ff mem 0xe0000000-0xe00000ff irq 7 at device 10.0 on pci0 dc0: Ethernet address: 00:a0:cc:40:93:80 miibus0: on dc0 ukphy0: on miibus0 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto pcm0: port 0xa000-0xa01f irq 10 at device 11.0 on pci0 atapci1: port 0x8000-0x803f,0x8400-0x8403,0x8800-0x8807,0x9000-0x9003,0x9400-0x9407 mem 0xdf800000-0xdf81ffff irq 10 at device 17.0 on pci0 ata2: at 0x9400 on atapci1 pcib1: on motherboard pci2: on pcib1 atkbdc0: at port 0x60,0x64 on isa0 atkbd0: flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0 vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0: parallel port not found. ata1-slave: ata_command: timeout waiting for intr ata1-slave: identify failed ata1-master: ata_command: timeout waiting for intr ata1-master: identify failed ad4: 43979MB [89355/16/63] at ata2-master UDMA100 acd0: CDROM at ata0-slave using PIO4 Mounting root from ufs:/dev/ad4s1a Despite the ata errors, everything appears to work fine (including the SBLive!). The system is blazing fast (of course the system this is replacing was a dual 233MMX) and appears to be rock solid thus far. A make -j10 buildworld from X while running a make install on the nedit and xmms ports didn't phase it. The config for the kernel is included below. If anyone can come up with any reasons for the problem with the parallel port, and a solution that doesn't call for disabling the ATA100 controler I'll give it a shot. machine i386 #cpu I586_CPU cpu I686_CPU ident Colossus maxusers 32 #makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols options INET #InterNETworking options INET6 #IPv6 communications protocols options FFS #Berkeley Fast Filesystem options FFS_ROOT #FFS usable as root device [keep this!] options SOFTUPDATES #Enable FFS soft updates support options NFS #Network Filesystem options CD9660 #ISO 9660 Filesystem options CD9660_ROOT #CD-ROM usable as root, CD9660 required options PROCFS #Process filesystem options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!] options UCONSOLE #Allow users to grab the console options USERCONFIG #boot -c editor options VISUAL_USERCONFIG #visual boot -c editor options KTRACE #ktrace(1) support options SYSVSHM #SYSV-style shared memory options SYSVMSG #SYSV-style message queues options SYSVSEM #SYSV-style semaphores options P1003_1B #Posix P1003_1B real-time extensions options _KPOSIX_PRIORITY_SCHEDULING options ICMP_BANDLIM #Rate limit bad replies options KBD_INSTALL_CDEV # install a CDEV entry in /dev # To make an SMP kernel, the next two are needed #options SMP # Symmetric MultiProcessor Kernel #options APIC_IO # Symmetric (APIC) I/O device isa device eisa device pci # ATA and ATAPI devices device ata0 at isa? port IO_WD1 irq 14 device ata1 at isa? port IO_WD2 irq 15 device ata device atadisk # ATA disk drives device atapicd # ATAPI CDROM drives options ATA_STATIC_ID #Static device numbering #options ATA_ENABLE_ATAPI_DMA #Enable DMA on ATAPI devices # SCSI devices needed for USB storage support device scbus # SCSI bus (required) device da # Direct Access (disks) # atkbdc0 controls both the keyboard and the PS/2 mouse device atkbdc0 at isa? port IO_KBD device atkbd0 at atkbdc? irq 1 flags 0x1 device psm0 at atkbdc? irq 12 device vga0 at isa? # splash screen/screen saver pseudo-device splash # syscons is the default console driver, resembling an SCO console device sc0 at isa? flags 0x100 # Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver #device vt0 at isa? #options XSERVER # support for X server on a vt console #options FAT_CURSOR # start with block cursor # If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines #options PCVT_SCANSET=2 # IBM keyboards are non-std # Floating point support - do not disable. device npx0 at nexus? port IO_NPX irq 13 # Serial (COM) ports device sio0 at isa? port IO_COM1 flags 0x10 irq 4 device sio1 at isa? port IO_COM2 irq 3 device sio2 at isa? disable port IO_COM3 irq 5 device sio3 at isa? disable port IO_COM4 irq 9 # Parallel port device ppc0 at isa? irq 7 device ppbus # Parallel port bus (required) device lpt # Printer device ppi # Parallel port interface device #device vpo # Requires scbus and da # PCI Ethernet NICs. device de # DEC/Intel DC21x4x (``Tulip'') # PCI Ethernet NICs that use the common MII bus controller code. # NOTE: Be sure to keep the 'device miibus' line in order to use these NICs! device miibus # MII bus support device dc # DEC/Intel 21143 and various workalikes # Pseudo devices - the number indicates how many units to allocated. pseudo-device loop # Network loopback pseudo-device ether # Ethernet support pseudo-device tun # Packet tunnel. pseudo-device pty # Pseudo-ttys (telnet etc) pseudo-device md # Memory "disks" pseudo-device gif 4 # IPv6 and IPv4 tunneling pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation) # The `bpf' pseudo-device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! pseudo-device bpf #Berkeley packet filter # SB Live support device pcm # USB support device uhci # UHCI PCI->USB interface device ohci # OHCI PCI->USB interface device usb # USB Bus (required) device ugen # Generic device uhid # "Human Interface Devices" device ukbd # Keyboard device ulpt # Printer device umass # Disks/Mass storage - Requires scbus and da device ums # Mouse device uscanner # Scanners # USB Ethernet, requires mii device aue # ADMtek USB ethernet device cue # CATC USB ethernet device kue # Kawasaki LSI USB ethernet To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message