sn 0x00000000) at 0x2f8 irq 3 drq -1 flags = 0x0 id 11 sio0 at 0x3f8-0x3ff irq 4 on isa sio0: type 16550A sio1 not found at 0x2f8 sio2: disabled, not probed. sio3: disabled, not probed. #output from: dmesg | grep PnP Probing for PnP devices: PnP: override config for CSN 1 LDN 0 vend_id 0x56119008 #output from dmesg|grep CSN CSN 1 Vendor ID: BDP1156 [0x56119008] Serial 0x00000000 PnP: override config for CSN 1 LDN 0 vend_id 0x56119008 #structure from sio.c static struct siopnp_ids {=20 u_long vend_id; char *id_str; } siopnp_ids[] =3D { { 0x8113b04e, "Supra1381"}, { 0x9012b04e, "Supra1290"}, { 0x11007256, "USR0011"}, { 0x56119008, "BDP1156"}, /* Smart One 56FW */ /* { 0x56119008, "Smart One 56FW"}, <---I've tried this*/ { 0 } }; # My computer BIOS setting COM1 =3D 0x3f8, irq 4 COM2 =3D DISABLED #my boot: command:=20 pnp 1 0 enable os irq0 4 drq0 0 port0 0x3f8 #output from pnpinfo Checking for Plug-n-Play devices... Card assigned CSN #1 Vendor ID BDP1156 (0x56119008), Serial Number 0x00000000 Device Description: Smart One 56FW =20 PnP Version 1.0, Vendor Version 0 Logical Device ID: BDP1156 0x56119008 #0 Device supports I/O Range Check TAG Start DF Good Configuration I/O Range 0x2f8 .. 0x2f8, alignment 0x8, len 0x8 [16-bit addr] TAG Start DF Good Configuration I/O Range 0x2e8 .. 0x2e8, alignment 0x8, len 0x8 [16-bit addr] TAG Start DF Good Configuration I/O Range 0x3f8 .. 0x3f8, alignment 0x8, len 0x8 [16-bit addr] TAG Start DF Good Configuration I/O Range 0x3e8 .. 0x3e8, alignment 0x8, len 0x8 [16-bit addr] TAG Start DF Acceptable Configuration I/O Range 0x100 .. 0x3e0, alignment 0x8, len 0x8 [16-bit addr] TAG End DF I/O Range 0x400 .. 0x7f0, alignment 0x10, len 0x10 [16-bit addr] I/O Range 0x800 .. 0xbf0, alignment 0x10, len 0x10 [16-bit addr] I/O Range 0xc00 .. 0xfe0, alignment 0x20, len 0x10 [16-bit addr] I/O Range 0x1100 .. 0x13f0, alignment 0x10, len 0x10 [16-bit addr] I/O Range 0x1400 .. 0x17f0, alignment 0x10, len 0x10 [16-bit addr] I/O Range 0x1800 .. 0x1be0, alignment 0x20, len 0x20 [16-bit addr] I/O Range 0x1c20 .. 0x1fe0, alignment 0x20, len 0x20 [16-bit addr] IRQ: 3 4 5 7 9 10 11 12 15 IRQ: High true level sensitive End Tag Successfully got 22 resources, 1 logical fdevs -- card select # 0x0001 CSN BDP1156 (0x56119008), Serial Number 0x00000000 Logical device #0 IO: 0x03f8 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 IRQ 4 0 DMA 0 0 IO range check 0x00 activate 0x01 =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3DEND=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D Please help me, i don't want to use my 14400 modem, which works. :{ Thanks, Michael ------=_NextPart_000_0004_01BE2F43.EC158460 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable

This is my second mailing of the = same=20 information, I hope someone can help me.

Dear freebsd-questions:
I've = read the FAQ=20 3.22 regarding PnP modems. I have a "Best Data" =
56kFlex=20 modem. I've created a custom kernel, modified the sio.c file =
and ran=20 the pnp command from the "boot:" prompt. I've configured = ppp to=20
use device cuaa1. I'm still not able to get this modem to work = with=20 freebsd.
PLEASE HELP ME! I've included output from my = configuration=20 files.

Please let me know what I'm missing, = thanks very=20 much.

=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3Dstart=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
#output=20 from: grep sio /usr/src/sys/i386/conf/CELINE

device sio0 at isa? port=20 "IO_COM1" tty irq 4 vector siointr
device sio1 at = isa? port=20 "IO_COM2" tty irq 3 vector siointr
device sio2 at = isa?=20 disable port "IO_COM3" tty irq 5 vector = siointr
device sio3=20 at isa? disable port "IO_COM4" tty irq 9 vector=20 siointr

#output from: dmesg|grep sio
=
sio4: probe=20 failed
sio4 (siopnp <Smart One 56FW> sn 0x00000000) at 0x2f8 = irq 3 drq=20 -1 flags 0x0 id 11
sio0 at 0x3f8-0x3ff irq 4 on isa
sio0: type=20 16550A
sio1 not found at 0x2f8
sio2: disabled, not = probed.
sio3:=20 disabled, not probed.

#output from: dmesg | grep = PnP

Probing for PnP devices:
PnP: = override config=20 for CSN 1 LDN 0 vend_id 0x56119008

#output from dmesg|grep = CSN

CSN 1 Vendor ID: BDP1156 = [0x56119008] Serial=20 0x00000000
PnP: override config for CSN 1 LDN 0 vend_id=20 0x56119008

#structure from sio.c

static struct siopnp_ids {=20
        u_long=20 vend_id;
        char = *id_str;
}=20 siopnp_ids[] =3D {
        { = 0x8113b04e,=20 "Supra1381"},
        {=20 0x9012b04e,=20 "Supra1290"},
        {=20 0x11007256, = "USR0011"},
       =20 { 0x56119008, "BDP1156"}, /* Smart One 56FW = */
/*   {=20 0x56119008, "Smart One 56FW"}, <---I've tried=20 this*/
        { 0=20 }
};

# My computer BIOS = setting

COM1 =3D 0x3f8, irq 4
COM2 =3D=20 DISABLED

#my boot: command:

pnp 1 0 enable os irq0 4 drq0 0 = port0=20 0x3f8

#output from pnpinfo

Checking for Plug-n-Play = devices...

Card assigned CSN #1
Vendor ID = BDP1156=20 (0x56119008), Serial Number 0x00000000
Device Description: Smart One=20 56FW
PnP Version 1.0, Vendor Version=20 0

Logical Device ID: BDP1156 = 0x56119008 #0
=20 Device supports I/O Range Check
TAG Start DF
Good=20 Configuration
    I/O Range 0x2f8 .. 0x2f8, alignment = 0x8, len=20 0x8
[16-bit addr]
TAG Start DF
Good=20 Configuration
    I/O Range 0x2e8 .. 0x2e8, alignment = 0x8, len=20 0x8
[16-bit addr]
TAG Start DF
Good=20 Configuration
    I/O Range 0x3f8 .. 0x3f8, alignment = 0x8, len=20 0x8
[16-bit addr]
TAG Start DF
Good=20 Configuration
    I/O Range 0x3e8 .. 0x3e8, alignment = 0x8, len=20 0x8
[16-bit addr]
TAG Start DF
Acceptable=20 Configuration
    I/O Range 0x100 .. 0x3e0, alignment = 0x8, len=20 0x8
[16-bit addr]
TAG End DF
    I/O Range = 0x400 ..=20 0x7f0, alignment 0x10, len 0x10
[16-bit addr]
    = I/O=20 Range 0x800 .. 0xbf0, alignment 0x10, len 0x10
[16-bit=20 addr]
    I/O Range 0xc00 .. 0xfe0, alignment 0x20, = len=20 0x10
[16-bit addr]
    I/O Range 0x1100 .. 0x13f0, = alignment 0x10, len 0x10
[16-bit addr]
    I/O = Range=20 0x1400 .. 0x17f0, alignment 0x10, len 0x10
[16-bit=20 addr]
    I/O Range 0x1800 .. 0x1be0, alignment 0x20, = len=20 0x20
[16-bit addr]
    I/O Range 0x1c20 .. 0x1fe0, = alignment 0x20, len 0x20
[16-bit addr]
    IRQ: 3 = 4 5 7 9=20 10 11 12 15 IRQ: High true level sensitive
End Tag

Successfully got 22 resources, 1 = logical=20 fdevs
-- card select # 0x0001

CSN BDP1156 (0x56119008), Serial = Number=20 0x00000000

Logical device #0
IO: = 0x03f8 0x0000=20 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
IRQ 4 0
DMA 0 0
IO = range=20 check 0x00 activate 0x01

=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3DEND=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D

Please help me, i don't want to use = my 14400=20 modem, which works. :{

Thanks,
Michael

------=_NextPart_000_0004_01BE2F43.EC158460-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message