Date: Sun, 20 May 2018 16:57:25 +0200 From: Niclas Zeising <zeising@freebsd.org> To: freebsd-x11@freebsd.org Subject: Re: ssh -X remote does not work due to problem with xauth Message-ID: <015d3f50-d264-aba4-9110-898856028f15@freebsd.org> In-Reply-To: <20180510200957.GA21218@sh4-5.1blu.de> References: <20180510182928.GA3747@c720-r314251> <20180510192510.GA38033@elch.exwg.net> <20180510194701.GB38033@elch.exwg.net> <466cd23b-344a-8d8a-d936-3ac38edff4a8@daemonic.se> <20180510200957.GA21218@sh4-5.1blu.de>
next in thread | previous in thread | raw e-mail | index | archive | help
On 05/10/18 22:09, Matthias Apitz wrote: > El d=C3=ADa Thursday, May 10, 2018 a las 09:57:50PM +0200, Niclas Zeisi= ng escribi=C3=B3: >=20 >> On 05/10/18 21:47, Christoph Moench-Tegeder wrote: >>> ## Christoph Moench-Tegeder (cmt@burggraben.net): >>> >>>> I haven't yet checked what causes these differing defaults. >>> >>> Well, now that I thought about it: most Linux distributions build the= ir >>> X server with "--enable-xcsecurity" in the configure flags. FreeBSD >>> does not set that flag, as far as I can see. Next question: why? >>> >> >> Hi! >> It could be because of backwards compatibility, or, because at least I >> wasn't really aware of that flag. Is it for xserver or some other pac= kage? >> If you have time, please try it out and see what happens. Usually you= can >> add it to CONFIGURE_ARGS=3D in the ports makefile and recompile the po= rt. I'm >> occupied elsewhere currently, but if I remember I'll look into it as w= ell. >> Regards >=20 > I did a quick check by running 'make configure' in ports/x11-servers/xo= rg-server > and --enable-xcsecurity is not used; I will recompile it with enabled > and report back. >=20 This should be fixed as of r470462. https://svnweb.freebsd.org/changeset/ports/470462 Regards --=20 Niclas Zeising
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?015d3f50-d264-aba4-9110-898856028f15>