Date: Wed, 18 Oct 2000 18:48:37 +0500 From: "Pete Young" <peteyng@home.com> To: "Chris Dempsey" <chrisdempsey@yahoo.com> Cc: "freebsd-questions@FreeBSD.ORG" <freebsd-questions@FreeBSD.ORG>, "xpert@xfree86.org" <xpert@xfree86.org> Subject: Re: GeForce 2 Message-ID: <20001019022713.VVED19212.mail2.rdc3.on.home.com@asus>
next in thread | raw e-mail | index | archive | help
On Wed, 18 Oct 2000 18:39:40 -0700 (PDT), Chris Dempsey wrote: >--- Pete Young <peteyng@home.com> wrote: >> On Wed, 18 Oct 2000 17:27:43 -0700 (PDT), Chris >> Dempsey wrote: >> >> >Pete, >> > >> >What type of GeForce2 chipset are you using? The >> MX >> >chipset or the GTS chipset? If using the GTS, you >> >didn't get a kernel driver not found error? >> > >> >Chris Dempsey >> >> I have an Elsa Gladiac with a GeForce 2 GTS and had >> no errors. Did you >> get the error with "XFree86 -configure" or "startx"? >> I am running >> Stable and Installworld was last done Oct 5. I >> cvsupped ports Oct 10 >> and built XFree86-4 at that time. >> >That is really bizzare. According to NVidia it >should not even be working. I noticed also that you >said you are using XFree86 4.1. Aren't they only at >4.0.1 right now? I have tried several different ways >of doing it, using FreeBSD-4.1.1-Stable and the xc-all >source, both from yesterday. When I do it normally, >it complains about not finding a kernel driver. When >I changed the #include vbe.h in the nv_include.h file >it craps out saying >(II) Loading >/usr/X11R6/lib/modules/drivers/nvidia_drv.o >(II) Module nvidia: vendor="NVIDIA Corporation" > compiled for 4.0.1, module version = 1.0.5 >(II) Loading /usr/X11R6/lib/modules/drivers/mga_drv.o >(II) Module mga: vendor="The XFree86 Project" > compiled for 4.0.1c, module version = 1.0.0 >(II) Loading >/usr/X11R6/lib/modules/drivers/glint_drv.o >(II) Module glint: vendor="The XFree86 Project" > compiled for 4.0.1c, module version = 1.0.0 >(II) Loading /usr/X11R6/lib/modules/drivers/nv_drv.o >Duplicate symbol RivaEnterLeave in >/usr/X11R6/lib/modules/drivers/nv_drv.o >Also defined in >/usr/X11R6/lib/modules/drivers/nvidia_drv.o >Fatal server error: >Module load failure > >I am using the ASUS V7700, a GTS-based card, so >nothing >should be different. I've cc'd this to both xpert@ >xfree86.org and freebsd-questions@freebsd.org. > Here is the pertinent part of my log XFree86 Version 4.0.1 / X Window System (protocol Version 11, revision 0, vendor release 6400) Release Date: 1 July 2000 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (see http://www.XFree86.Org/FAQ) Operating System: FreeBSD 4.1.1-STABLE i386 [ELF] Module Loader present (==) Log file: "/var/log/XFree86.0.log", Time: Wed Oct 18 22:06:34 2000 (==) Using config file: "/etc/X11/XF86Config" Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (??) unknown. (==) ServerLayout "Simple Layout" (**) |-->Screen "Screen 1" (0) (**) | |-->Monitor "My Monitor" (**) | |-->Device "Card0" (**) |-->Input Device "Mouse1" (**) |-->Input Device "Keyboard1" (WW) Option "XkbCompat" requires an string value (**) XKB: rules: "xfree86" (**) XKB: model: "pc104" (**) XKB: layout: "us" (**) FontPath set to "/usr/X11R6/lib/X11/fonts/local/,/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/ X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11 R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/f onts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/" (**) RgbPath set to "/usr/X11R6/lib/X11/rgb" (==) ModulePath set to "/usr/X11R6/lib/modules" (--) Using syscons driver with X support (version 2.0) (--) using VT number 9 (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor="The XFree86 Project" compiled for 4.0.1, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor="The XFree86 Project" compiled for 4.0.1, module version = 0.1.0 (II) Loading /usr/X11R6/lib/modules/libscanpci.a (II) Module scanpci: vendor="The XFree86 Project" compiled for 4.0.1, module version = 0.1.0 (II) Unloading /usr/X11R6/lib/modules/libscanpci.a (--) PCI:*(1:0:0) NVidia GeForce2 GTS rev 163, Mem @ 0xd6000000/24, 0xd8000000/27 (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a (II) Module dbe: vendor="The XFree86 Project" compiled for 4.0.1, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a (II) Module extmod: vendor="The XFree86 Project" compiled for 4.0.1, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a (II) Module type1: vendor="The XFree86 Project" compiled for 4.0.1, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a (II) Module freetype: vendor="The XFree86 Project" compiled for 4.0.1, module version = 1.1.7 (II) Loading /usr/X11R6/lib/modules/drivers/nv_drv.o (II) Module nv: vendor="The XFree86 Project" compiled for 4.0.1, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o (II) Module mouse: vendor="The XFree86 Project" compiled for 4.0.1, module version = 1.0.0 (II) NV: driver for NVIDIA chipsets: RIVA128, RIVATNT, RIVATNT2, RIVATNT2 (Ultra), RIVATNT2 (Vanta), RIVATNT2 M64, RIVATNT2 (Integrated), GeForce 256, GeForce DDR, Quadro, GeForce2 GTS, GeForce2 GTS (rev 1), GeForce2 ultra, Quadro 2 Pro, GeForce2 MX, GeForce2 MX DDR, Quadro 2 MXR (--) Assigning device section with no busID to primary device (--) Chipset GeForce2 GTS found (--) NV(0): Chipset: "GeForce2 GTS" (**) NV(0): Depth 16, (--) framebuffer bpp 16 (==) NV(0): RGB weight 565 (==) NV(0): Default visual is TrueColor (II) Loading /usr/X11R6/lib/modules/libvgahw.a (II) Module vgahw: vendor="The XFree86 Project" compiled for 4.0.1, module version = 0.1.0 (==) NV(0): Using HW cursor (--) NV(0): Linear framebuffer at 0xD8000000 (--) NV(0): MMIO registers at 0xD6000000 (==) NV(0): Write-combining range (0xd6710000,0x10000) was already clear (==) NV(0): Write-combining range (0xd6600000,0x1000) was already clear (==) NV(0): Write-combining range (0xd6680000,0x1000) was already clear (==) NV(0): Write-combining range (0xd6100000,0x1000) was already clear (==) NV(0): Write-combining range (0xd6002000,0x2000) was already clear (==) NV(0): Write-combining range (0xd6400000,0x2000) was already clear (==) NV(0): Write-combining range (0xd6101000,0x1000) was already clear (==) NV(0): Write-combining range (0xd6009000,0x1000) was already clear (==) NV(0): Write-combining range (0xd6000000,0x1000) was already clear (==) NV(0): Write-combining range (0xd6800000,0x10000) was already clear (==) NV(0): Write-combining range (0xd6601000,0x1000) was already clear (==) NV(0): Write-combining range (0xd6681000,0x1000) was already clear (==) NV(0): Write-combining range (0xd60c0000,0x1000) was already clear (--) NV(0): VideoRAM: 32768 kBytes (II) Loading /usr/X11R6/lib/modules/libddc.a (II) Module ddc: vendor="The XFree86 Project" compiled for 4.0.1, module version = 1.0.0 (==) NV(0): Write-combining range (0xa0000,0x10000) was already clear (II) Loading /usr/X11R6/lib/modules/libi2c.a (II) Module i2c: vendor="The XFree86 Project" compiled for 4.0.1, module version = 1.2.0 (II) NV(0): I2C bus "DDC" initialized. (II) NV(0): I2C device "DDC:ddc2" registered. (II) NV(0): I2C device "DDC:ddc2" removed. (II) NV(0): I2C Monitor info: 0x0 (II) NV(0): end of I2C Monitor info (--) NV(0): No DDC signal (II) NV(0): DDC Monitor info: 0x0 (II) NV(0): end of DDC Monitor info (==) NV(0): Write-combining range (0xa0000,0x10000) was already clear (==) NV(0): Using gamma correction (1.0, 1.0, 1.0) (II) NV(0): My Monitor: Using hsync range of 31.50- 48.50 kHz (II) NV(0): My Monitor: Using vrefresh range of 50.00- 70.00 Hz (II) NV(0): Clock range: 12.00 to 350.00 MHz (WW) NV(0): Mode "640x350" deleted (vrefresh out of range) (WW) NV(0): Mode "640x400" deleted (vrefresh out of range) (WW) NV(0): Mode "720x400" deleted (vrefresh out of range) (WW) NV(0): Mode "640x480" deleted (vrefresh out of range) (WW) NV(0): Mode "640x480" deleted (vrefresh out of range) (WW) NV(0): Mode "640x480" deleted (vrefresh out of range) (WW) NV(0): Mode "800x600" deleted (vrefresh out of range) (WW) NV(0): Mode "800x600" deleted (vrefresh out of range) (WW) NV(0): Mode "800x600" deleted (hsync out of range) (WW) NV(0): Mode "1024x768" deleted (vrefresh out of range) (WW) NV(0): Mode "1024x768" deleted (hsync out of range) (WW) NV(0): Mode "1024x768" deleted (hsync out of range) (WW) NV(0): Mode "1024x768" deleted (hsync out of range) (WW) NV(0): Mode "1152x864" deleted (hsync out of range) (WW) NV(0): Mode "1280x960" deleted (hsync out of range) (WW) NV(0): Mode "1280x960" deleted (hsync out of range) (WW) NV(0): Mode "1280x1024" deleted (hsync out of range) (WW) NV(0): Mode "1280x1024" deleted (hsync out of range) (WW) NV(0): Mode "1280x1024" deleted (hsync out of range) (WW) NV(0): Mode "1600x1200" deleted (hsync out of range) (WW) NV(0): Mode "1600x1200" deleted (hsync out of range) (WW) NV(0): Mode "1600x1200" deleted (hsync out of range) (WW) NV(0): Mode "1600x1200" deleted (hsync out of range) (WW) NV(0): Mode "1600x1200" deleted (hsync out of range) (WW) NV(0): Mode "1792x1344" deleted (hsync out of range) (WW) NV(0): Mode "1792x1344" deleted (hsync out of range) (WW) NV(0): Mode "1856x1392" deleted (hsync out of range) (WW) NV(0): Mode "1856x1392" deleted (hsync out of range) (WW) NV(0): Mode "1920x1440" deleted (hsync out of range) (WW) NV(0): Mode "1920x1440" deleted (hsync out of range) (WW) NV(0): Mode "1280x1024" deleted (no mode of this name) (--) NV(0): Virtual size is 1024x768 (pitch 1024) (**) NV(0): Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz (**) NV(0): Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz (**) NV(0): Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz (==) NV(0): DPI set to (75, 75) (II) Loading /usr/X11R6/lib/modules/libcfb16.a (II) Module cfb16: vendor="The XFree86 Project" compiled for 4.0.1, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/libcfb.a (II) Module cfb: vendor="The XFree86 Project" compiled for 4.0.1, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/libmfb.a (II) Module mfb: vendor="The XFree86 Project" compiled for 4.0.1, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/libxaa.a (II) Module xaa: vendor="The XFree86 Project" compiled for 4.0.1, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/libramdac.a (II) Module ramdac: vendor="The XFree86 Project" compiled for 4.0.1, module version = 0.1.0 (==) NV(0): Write-combining range (0xd6000000,0x1000000) was already clear (==) NV(0): Write-combining range (0xd8000000,0x2000000) (==) NV(0): Write-combining range (0xa0000,0x10000) was already clear (II) NV(0): Using XFree86 Acceleration Architecture (XAA) Screen to screen bit blits Solid filled rectangles 8x8 mono pattern filled rectangles Indirect CPU to Screen color expansion Solid Lines Offscreen Pixmaps Setting up tile and stipple cache: 32 128x128 slots 32 256x256 slots 16 512x512 slots (==) NV(0): Backing store disabled (==) NV(0): Silken mouse enabled Here are the specs on the files I replaced before compiling the port. -rw-r--r-- 1 root wheel - 58290 Sep 13 11:47 xf86PciInfo.h -rw-r--r-- 1 root wheel - 51657 Oct 6 08:31 nv_driver.c -rw-r--r-- 1 root wheel - 1331 Oct 6 08:31 nv_include.h -rw-r--r-- 1 root wheel - 4072 Aug 3 08:24 nv_local.h -rw-r--r-- 1 root wheel - 5592 Oct 9 16:26 nv_type.h -rw-r--r-- 1 root wheel - 23146 Aug 11 02:14 nv_xaa.c -rw-r--r-- 1 root wheel - 30730 Aug 11 01:04 riva_tbl.h To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20001019022713.VVED19212.mail2.rdc3.on.home.com>