Date: Wed, 20 Mar 2002 09:05:30 -0500 From: Bob Bomar <bulldog@fxp.org> To: questions@freebsd.org Subject: startx fails Message-ID: <20020320140530.GA63882@peitho.fxp.org>
next in thread | raw e-mail | index | archive | help
--1yeeQ81UyVL57Vl7 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline I am trying to get X up and running on my 4.4 Release box. When I run startx, the X server starts, but all it does is show lines that wave across the screen. Attached is the output of startx. I would also like to know where the log files are for X. -- |------------------------------------| | Bob Bomar | | bulldog@fxp.org | | http://fly.homeunix.org/~bob | |====================================| | FreeBSD: The Power to Serve | | http://www.FreeBSD.org | |------------------------------------| --1yeeQ81UyVL57Vl7 Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="startx.script" Script started on Wed Mar 20 08:04:34 2002 fly# startx XFree86 Version 3.3.6 / X Window System (protocol Version 11, revision 0, vendor release 6300) Release Date: xx November 2000 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (see http://www.XFree86.Org/FAQ) Operating System: FreeBSD 4.4-RELEASE i386 [ELF] Configured drivers: SVGA: server for SVGA graphics adaptors (Patchlevel 1): NV1, STG2000, RIVA 128, RIVA TNT, RIVA TNT2, RIVA ULTRA TNT2, RIVA VANTA, RIVA ULTRA VANTA, RIVA INTEGRATED, GeForce 256, GeForce DDR, Quadro, GeForce2 GTS, GeForce2 GTS (rev1), GeForce2 Ultra, Quadro 2 Pro, GeForce2 MX, GeForce2 MX DDR, Quadro 2 MXR, ET4000, ET4000W32, ET4000W32i, ET4000W32i_rev_b, ET4000W32i_rev_c, ET4000W32p, ET4000W32p_rev_a, ET4000W32p_rev_b, ET4000W32p_rev_c, ET4000W32p_rev_d, ET6000, ET6100, et3000, pvga1, wd90c00, wd90c10, wd90c30, wd90c24, wd90c31, wd90c33, gvga, r128, ati, sis86c201, sis86c202, sis86c205, sis86c215, sis86c225, sis5597, sis5598, sis6326, sis530, sis620, sis300, sis630, sis540, tvga8200lx, tvga8800cs, tvga8900b, tvga8900c, tvga8900cl, tvga8900d, tvga9000, tvga9000i, tvga9100b, tvga9200cxr, tgui9400cxi, tgui9420, tgui9420dgi, tgui9430dgi, tgui9440agi, cyber9320, tgui9660, tgui9680, tgui9682, tgui9685, cyber9382, cyber9385, cyber9388, cyber9397, cyber9520, cyber9525, 3dimage975, 3dimage985, cyber9397dvd, blade3d, cyberblade, clgd5420, clgd5422, clgd5424, clgd5426, clgd5428, clgd5429, clgd5430, clgd5434, clgd5436, clgd5446, clgd5480, clgd5462, clgd5464, clgd5465, clgd6205, clgd6215, clgd6225, clgd6235, clgd7541, clgd7542, clgd7543, clgd7548, clgd7555, clgd7556, ncr77c22, ncr77c22e, cpq_avga, mga2064w, mga1064sg, mga2164w, mga2164w AGP, mgag200, mgag100, mgag400, oti067, oti077, oti087, oti037c, al2101, ali2228, ali2301, ali2302, ali2308, ali2401, cl6410, cl6412, cl6420, cl6440, video7, ark1000vl, ark1000pv, ark2000pv, ark2000mt, mx, realtek, AP6422, AT24, AT3D, s3_savage, s3_virge, s3_svga, NM2070, NM2090, NM2093, NM2097, NM2160, NM2200, ct65520, ct65525, ct65530, ct65535, ct65540, ct65545, ct65546, ct65548, ct65550, ct65554, ct65555, ct68554, ct69000, ct64200, ct64300, mediagx, V1000, V2100, V2200, p9100, spc8110, i740, i740_pci, i810, i810-dc100, i810e, Voodoo Banshee, Voodoo3, smi, generic Using syscons driver with X support (version 2.0) (using VT number 9) XF86Config: /etc/XF86Config (**) stands for supplied, (--) stands for probed/default values (**) XKB: disabled (**) XKB: keymap: "xfree86(us)" (overrides other XKB settings) (**) Mouse: type: PS/2, device: /dev/sysmouse, buttons: 3 (**) SVGA: Graphics device ID: "Matrox" (**) SVGA: Monitor ID: "Impression" (--) SVGA: Mode "1024x768" needs hsync freq of 70.24 kHz. Deleted. (--) SVGA: Mode "1152x864" needs hsync freq of 70.88 kHz. Deleted. (--) SVGA: Mode "1280x1024" needs hsync freq of 74.59 kHz. Deleted. (--) SVGA: Mode "1600x1200" needs hsync freq of 75.00 kHz. Deleted. (--) SVGA: Mode "1152x864" needs hsync freq of 76.01 kHz. Deleted. (--) SVGA: Mode "1280x1024" needs hsync freq of 78.86 kHz. Deleted. (--) SVGA: Mode "1024x768" needs hsync freq of 80.21 kHz. Deleted. (--) SVGA: Mode "1280x1024" needs hsync freq of 81.13 kHz. Deleted. (--) SVGA: Mode "1600x1200" needs hsync freq of 87.50 kHz. Deleted. (--) SVGA: Mode "1152x864" needs hsync freq of 89.62 kHz. Deleted. (--) SVGA: Mode "1280x1024" needs hsync freq of 91.15 kHz. Deleted. (--) SVGA: Mode "1600x1200" needs hsync freq of 93.75 kHz. Deleted. (--) SVGA: Mode "1600x1200" needs hsync freq of 105.77 kHz. Deleted. (--) SVGA: Mode "1280x1024" needs hsync freq of 107.16 kHz. Deleted. (--) SVGA: Mode "1800X1440" needs hsync freq of 96.15 kHz. Deleted. (--) SVGA: Mode "1800X1440" needs hsync freq of 104.52 kHz. Deleted. (**) FontPath set to "/usr/X11R6/lib/X11/fonts/local/,/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/" (--) SVGA: PCI: Matrox MGA G400 AGP rev 130, Memory @ 0xe8000000, 0xe4000000 (--) SVGA: Linear framebuffer at 0xE8000000 (--) SVGA: MMIO registers at 0xE4000000 (--) SVGA: Video BIOS info block at 0x000c79c0 (--) SVGA: Video BIOS info block not detected! (--) SVGA: detected an SDRAM card (--) SVGA: chipset: mgag400 (**) SVGA: videoram: 16384k (**) SVGA: Option "dac_8_bit" (**) SVGA: Using 8 bits per color component (**) SVGA: Using 8 bpp, Depth 8, Color weight: 888 (--) SVGA: Maximum allowed dot-clock: 300.000 MHz (**) SVGA: Mode "1024x768": mode clock = 85.000 (**) SVGA: Mode "800x600": mode clock = 69.650 (**) SVGA: Mode "640x480": mode clock = 45.800 (--) SVGA: Virtual resolution set to 1024x768 (--) SVGA: Generic SpeedUps selected (Flags=0x30) (--) SVGA: Using hardware cursor (--) SVGA: PLL reference freq: 27.050 MHz (--) SVGA: Read OPTION 0x400a1160 (--) SVGA: Using XAA (XFree86 Acceleration Architecture) (--) SVGA: XAA: Solid filled rectangles (--) SVGA: XAA: Screen-to-screen copy (--) SVGA: XAA: 8x8 color expand pattern fill (--) SVGA: XAA: CPU to screen color expansion (TE/NonTE imagetext, TE/NonTE polytext) (--) SVGA: XAA: Using 8 128x128 areas for pixmap caching (--) SVGA: XAA: Caching tiles and stipples (--) SVGA: XAA: General lines and segments (--) SVGA: XAA: Dashed lines and segments ^Cxinit: No such file or directory (errno 2): unexpected signal 2 waiting for X server to shut down login: fatal IO error 32 (Broken pipe) or KillClient on X server ":0.0" X connection to :0.0 broken (explicit kill or server shutdown). xterm: fatal IO error 32 (Broken pipe) or KillClient on X server ":0.0" xterm: fatal IO error 32 (Broken pipe) or KillClient on X server ":0.0" . fly# exit exit Script done on Wed Mar 20 08:04:46 2002 --1yeeQ81UyVL57Vl7-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20020320140530.GA63882>