Date: Tue, 16 Feb 1999 17:25:23 -0800 (PST) From: Matthew Jacob <mjacob@nas.nasa.gov> To: freebsd-scsi@freebsd.org Subject: Simple 2944 not handled? Message-ID: <Pine.LNX.4.02.9902161714140.25247-100000@remler.nas.nasa.gov>
next in thread | raw e-mail | index | archive | help
I'm having a heckuva a time with the the Adaptec driver- this is with kernels from 3.0 to today. The hardware is a SuperMicro P6DLH- or some such- single 300Mhz Pentium 2, two PCI busses, etc...I've had 1 through 4 Adaptec 2944 cards (differential 2940AU variants) installed in this box. What happens, whether there's something attached to the cards or not, is that during probetime commands time out. I can't figure out what and where and why, so here's a boot verbose transcript and maybe someone else can figure out what's up.... I was going to go back and try and do some large filesystem testing, but if I can't get mass storage going, that's a problem (I *could* round up some more Qlogic differential cards, but I wanted to avoid questions over why I'm not using a 'mainstream' HBA...) The case below has an adaptec unit attached- but the same errors occur even if nothing else is attached. The adaptec unit is seen fine from the BIOS control page. I don't remember whether I've tried alternate drivers and OS's on this particular machine. -matt Copyright (c) 1992-1999 FreeBSD Inc. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 4.0-CURRENT #1: Tue Feb 16 16:00:37 PST 1999 mjacob@ds3.nas.nasa.gov:/usr/src/sys/compile/DS1 Calibrating clock(s) ... TSC clock: 334128285 Hz, i8254 clock: 1193316 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz CLK_USE_TSC_CALIBRATION not specified - using old calibration method CPU: Pentium II/Xeon/Celeron (686-class CPU) Origin = "GenuineIntel" Id = 0x650 Stepping=0 Features=0x183fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,<b24>> real memory = 536870912 (524288K bytes) Physical memory chunk(s): 0x00001000 - 0x0009efff, 647168 bytes (158 pages) 0x002f1000 - 0x1ffebfff, 533704704 bytes (130299 pages) avail memory = 520339456 (508144K bytes) Programming 24 pins in IOAPIC #0 SMP: CPU0 apic_initialize(): lint0: 0x00000700 lint1: 0x00010400 TPR: 0x00000010 SVR: 0x000001ff FreeBSD/SMP: Multiprocessor motherboard cpu0 (BSP): apic id: 0, version: 0x00040011, at 0xfee00000 io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec00000 Found BIOS32 Service Directory header at 0xf00fdb60 Entry = 0xfdb70 (0xf00fdb70) Rev = 0 Len = 1 PCI BIOS entry at 0xdb91 DMI header at 0xf00f6970 Version 0.0 Table at 0xf6a53, 33 entries, 1019 bytes Other BIOS signatures found: ACPI: 00000000 $PnP: 000f7950 Preloaded elf kernel "kernel.new" at 0xf02e1000. ccd0-3: Concatenated disk drivers Math emulator present SMP: CPU0 bsp_apic_configure(): lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000010 SVR: 0x000001ff pci_open(1): mode 1 addr port (0x0cf8) is 0x80003b40 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71808086) Probing for devices on PCI bus 0: found-> vendor=0x8086, dev=0x7180, revid=0x03 class=06-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[0]: type 3, range 32, base f8000000, size 26 chip0: <Host to PCI bridge (vendor=8086 device=7180)> rev 0x03 on pci0.0.0 found-> vendor=0x8086, dev=0x7181, revid=0x03 class=06-04-00, hdrtype=0x01, mfdev=0 subordinatebus=1 secondarybus=1 chip1: <PCI to PCI bridge (vendor=8086 device=7181)> rev 0x03 on pci0.1.0 found-> vendor=0x8086, dev=0x7110, revid=0x01 class=06-01-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 chip2: <Intel 82371AB PCI to ISA bridge> rev 0x01 on pci0.7.0 found-> vendor=0x8086, dev=0x7111, revid=0x01 class=01-01-80, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[0]: type 4, range 32, base 0000ffa0, size 4 ide_pci0: <Intel PIIX4 Bus-master IDE controller> rev 0x01 on pci0.7.1 intel_piix_status: primary master/slave sample = 3, master/slave recovery = 1 intel_piix_status: primary master fastDMAonly disabled, pre/post enabled, intel_piix_status: IORDY sampling enabled, intel_piix_status: fast PIO enabled intel_piix_status: primary master/slave sample = 3, master/slave recovery = 1 intel_piix_status: primary slave fastDMAonly disabled, pre/post disabled, intel_piix_status: IORDY sampling disabled, intel_piix_status: fast PIO disabled ide_pci: busmaster 0 status: 24 from port: 0000ffa2 ide_pci: ide0:0 has been configured for DMA by BIOS intel_piix_status: secondary master/slave sample = 5, master/slave recovery = 4 intel_piix_status: secondary master fastDMAonly disabled, pre/post disabled, intel_piix_status: IORDY sampling disabled, intel_piix_status: fast PIO disabled intel_piix_status: secondary master/slave sample = 5, master/slave recovery = 4 intel_piix_status: secondary slave fastDMAonly disabled, pre/post disabled, intel_piix_status: IORDY sampling disabled, intel_piix_status: fast PIO disabled ide_pci: busmaster 1 status: 04 from port: 0000ffaa Freeing (NOT implemented) redirected ISA irq 0. found-> vendor=0x8086, dev=0x7112, revid=0x01 class=0c-03-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=d, irq=2 map[0]: type 4, range 32, base 0000ef80, size 5 found-> vendor=0x8086, dev=0x7113, revid=0x01 class=06-80-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 chip3: <Intel 82371AB Power management controller> rev 0x01 on pci0.7.3 found-> vendor=0x8086, dev=0x0960, revid=0x03 class=06-04-00, hdrtype=0x01, mfdev=1 subordinatebus=2 secondarybus=2 chip4: <PCI to PCI bridge (vendor=8086 device=0960)> rev 0x03 on pci0.13.0 Freeing (NOT implemented) redirected ISA irq 9. found-> vendor=0x8086, dev=0x1960, revid=0x03 class=05-80-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 intpin=a, irq=17 map[0]: type 3, range 32, base febff000, size 12 Freeing (NOT implemented) redirected ISA irq 5. found-> vendor=0x120f, dev=0x0001, revid=0x00 class=02-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=16 map[0]: type 1, range 32, base ffafe000, size 12 Freeing (NOT implemented) redirected ISA irq 9. found-> vendor=0x1011, dev=0x0009, revid=0x22 class=02-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=17 map[0]: type 4, range 32, base 0000e880, size 7 map[1]: type 1, range 32, base ffafdf80, size 7 de0: <Digital 21140A Fast Ethernet> rev 0x22 int a irq 17 on pci0.16.0 de0: 21140A [10-100Mb/s] pass 2.2 de0: address 00:40:05:43:08:cb bpf: de0 attached Freeing (NOT implemented) redirected ISA irq 11. found-> vendor=0x9004, dev=0x8478, revid=0x01 class=01-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=18 map[0]: type 4, range 32, base 0000ec00, size 8 map[1]: type 1, range 32, base ffaff000, size 12 ahc0: <Adaptec 2944 Ultra SCSI adapter> rev 0x01 int a irq 18 on pci0.18.0 ahc0: io_port 0xec00 vaddr 0 ahc0: Reading SEEPROM...done. ahc0: Low byte termination Enabled ahc0: High byte termination Enabled ahc0: aic7880 Wide Channel A, SCSI Id=7, 16/255 SCBs ahc0: Downloading Sequencer Program... 413 instructions downloaded Probing for devices on PCI bus 1: Probing for devices on PCI bus 2: Freeing (NOT implemented) redirected ISA irq 5. found-> vendor=0x120f, dev=0x0001, revid=0x00 class=02-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=16 map[0]: type 1, range 32, base ff9ff000, size 12 Initializing PnP override table Probing for PnP devices: Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 No Plug-n-Play devices were found Probing for devices on the ISA bus: atkbd: the current kbd controller command byte 0065 atkbd: keyboard ID 0x41ab (2) kbdc: RESET_KBD return code:00fa kbdc: RESET_KBD status:00aa sc0 on isa sc0: fb0 kbd0 sc0: VGA color <16 virtual consoles, flags=0x0> atkbdc0 at 0x60-0x6f on motherboard atkbd0 irq 1 on isa kbd0: atkbd0, AT 101/102 (2), config:0x10000, flags:0x3d0000 psm0: current command byte:0065 kbdc: TEST_AUX_PORT status:0000 kbdc: RESET_AUX return code:00fa kbdc: RESET_AUX status:00aa kbdc: RESET_AUX ID:0000 psm: status 00 02 64 psm: status 10 03 3c psm: status 10 03 3c psm: status 10 03 3c psm: status 10 00 64 psm: data 08 00 00 psm: data 08 00 00 psm: status 00 02 64 psm0 irq 12 on isa psm0: model Generic PS/2 mouse, device ID 0, 3 buttons psm0: config:00000000, flags:00000000, packet size:3 psm0: syncmask:c0, syncbits:00 sio0: irq maps: 0x1 0x11 0x1 0x1 sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa sio0: type 16550A sio1: irq maps: 0x1 0x9 0x1 0x1 sio1 at 0x2f8-0x2ff irq 3 on isa sio1: type 16550A fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa fdc0: FIFO enabled, 8 bytes threshold fd0: 1.44MB 3.5in wdc0 at 0x1f0-0x1f7 irq 14 on isa wdc0: unit 0 (wd0): <WDC AC33200L> wd0: 3098MB (6346368 sectors), 6296 cyls, 16 heads, 63 S/T, 512 B/S wd0: ATA INQUIRE valid = 0007, dmamword = 0407, apio = 0003, udma = 0407 wdc1 not found at 0x170 vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3b0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xf00b8000 size:32k gran:32k, buf:0x0 size:0k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff npx0 on motherboard npx0: INT 16 interface apm0: disabled, not probed. imasks: bio c8004040, tty c300101a, net c6020000 SMP: enabled INTs: 1, 3, 4, 6, 12, 14, 17, 18, apic_imen: 0x00f9afa5 BIOS Geometries: 0:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors 1:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors 2:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors 3:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors 4:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors 5:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors 6:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors 7:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors 0 accounted for Device configuration finished. APIC_IO: Testing 8254 interrupt delivery APIC_IO: routing 8254 via pin 2 bpf: tun0 attached bpf: lo0 attached de0 XXX: driver didn't set ifq_maxlen lo0 XXX: driver didn't set ifq_maxlen Waiting 2 seconds for SCSI devices to settle (noperiph:ahc0:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted. de0: enabling Full Duplex 100baseTX port (probe0:ahc0:0:0:0): SCB 0x0 - timed out while idle, LASTPHASE == 0x1, SEQADDR == 0x18c (probe0:ahc0:0:0:0): Queuing a BDR SCB (probe0:ahc0:0:0:0): SCB 0x0 - timed out while idle, LASTPHASE == 0x1, SEQADDR == 0x18c (probe0:ahc0:0:0:0): no longer in timeout, status = 34b ahc0: Issued Channel A Bus Reset. 15 SCBs aborted (probe1:ahc0:0:1:0): SCB 0x0 - timed out while idle, LASTPHASE == 0x1, SEQADDR == 0x18c (probe1:ahc0:0:1:0): Queuing a BDR SCB (probe1:ahc0:0:1:0): SCB 0x0 - timed out while idle, LASTPHASE == 0x1, SEQADDR == 0x18c (probe1:ahc0:0:1:0): no longer in timeout, status = 34b ahc0: Issued Channel A Bus Reset. 15 SCBs aborted ahc0: Selection Timeout on A:2. 1 SCBs aborted (probe3:ahc0:0:3:0): SCB 0x1 - timed out while idle, LASTPHASE == 0x1, SEQADDR == 0x18c (probe3:ahc0:0:3:0): Queuing a BDR SCB (probe3:ahc0:0:3:0): SCB 0x1 - timed out while idle, LASTPHASE == 0x1, SEQADDR == 0x18c (probe3:ahc0:0:3:0): no longer in timeout, status = 34b ahc0: Issued Channel A Bus Reset. 14 SCBs aborted (probe4:ahc0:0:4:0): SCB 0x1 - timed out while idle, LASTPHASE == 0x1, SEQADDR == 0x18c (probe4:ahc0:0:4:0): Queuing a BDR SCB (probe4:ahc0:0:4:0): SCB 0x1 - timed out while idle, LASTPHASE == 0x1, SEQADDR == 0x18c (probe4:ahc0:0:4:0): no longer in timeout, status = 34b ahc0: Issued Channel A Bus Reset. 14 SCBs aborted (probe5:ahc0:0:5:0): SCB 0x1 - timed out while idle, LASTPHASE == 0x1, SEQADDR == 0x18c (probe5:ahc0:0:5:0): Queuing a BDR SCB (probe5:ahc0:0:5:0): SCB 0x1 - timed out while idle, LASTPHASE == 0x1, SEQADDR == 0x18c (probe5:ahc0:0:5:0): no longer in timeout, status = 34b ahc0: Issued Channel A Bus Reset. 14 SCBs aborted (probe6:ahc0:0:6:0): SCB 0x1 - timed out while idle, LASTPHASE == 0x1, SEQADDR == 0x18c (probe6:ahc0:0:6:0): Queuing a BDR SCB (probe6:ahc0:0:6:0): SCB 0x1 - timed out while idle, LASTPHASE == 0x1, SEQADDR == 0x18c (probe6:ahc0:0:6:0): no longer in timeout, status = 34b ahc0: Issued Channel A Bus Reset. 14 SCBs aborted (probe7:ahc0:0:8:0): SCB 0x1 - timed out while idle, LASTPHASE == 0x1, SEQADDR == 0x18c (probe7:ahc0:0:8:0): Queuing a BDR SCB (probe7:ahc0:0:8:0): SCB 0x1 - timed out while idle, LASTPHASE == 0x1, SEQADDR == 0x18c (probe7:ahc0:0:8:0): no longer in timeout, status = 34b ahc0: Issued Channel A Bus Reset. 14 SCBs aborted (probe8:ahc0:0:9:0): SCB 0x1 - timed out while idle, LASTPHASE == 0x1, SEQADDR == 0x18c (probe8:ahc0:0:9:0): Queuing a BDR SCB (probe8:ahc0:0:9:0): SCB 0x1 - timed out while idle, LASTPHASE == 0x1, SEQADDR == 0x18c (probe8:ahc0:0:9:0): no longer in timeout, status = 34b ahc0: Issued Channel A Bus Reset. 14 SCBs aborted (probe9:ahc0:0:10:0): SCB 0x1 - timed out while idle, LASTPHASE == 0x1, SEQADDR == 0x18c (probe9:ahc0:0:10:0): Queuing a BDR SCB (probe9:ahc0:0:10:0): SCB 0x1 - timed out while idle, LASTPHASE == 0x1, SEQADDR == 0x18c (probe9:ahc0:0:10:0): no longer in timeout, status = 34b ahc0: Issued Channel A Bus Reset. 14 SCBs aborted (probe10:ahc0:0:11:0): SCB 0x1 - timed out while idle, LASTPHASE == 0x1, SEQADDR == 0x18c (probe10:ahc0:0:11:0): Queuing a BDR SCB (probe10:ahc0:0:11:0): SCB 0x1 - timed out while idle, LASTPHASE == 0x1, SEQADDR == 0x18c (probe10:ahc0:0:11:0): no longer in timeout, status = 34b ahc0: Issued Channel A Bus Reset. 14 SCBs aborted ahc0: Selection Timeout on A:12. 1 SCBs aborted ahc0: Selection Timeout on A:13. 1 SCBs aborted (probe13:ahc0:0:14:0): SCB 0x3 - timed out while idle, LASTPHASE == 0x1, SEQADDR == 0x18c (probe13:ahc0:0:14:0): Queuing a BDR SCB (probe13:ahc0:0:14:0): SCB 0x3 - timed out while idle, LASTPHASE == 0x1, SEQADDR == 0x18c (probe13:ahc0:0:14:0): no longer in timeout, status = 34b ahc0: Issued Channel A Bus Reset. 12 SCBs aborted (probe14:ahc0:0:15:0): SCB 0x3 - timed out while idle, LASTPHASE == 0x1, SEQADDR == 0x18c (probe14:ahc0:0:15:0): Queuing a BDR SCB (probe14:ahc0:0:15:0): SCB 0x3 - timed out while idle, LASTPHASE == 0x1, SEQADDR == 0x18c (probe14:ahc0:0:15:0): no longer in timeout, status = 34b ahc0: Issued Channel A Bus Reset. 12 SCBs aborted (probe0:ahc0:0:0:0): SCB 0x3 - timed out while idle, LASTPHASE == 0x1, SEQADDR == 0x18c (probe0:ahc0:0:0:0): Queuing a BDR SCB (probe0:ahc0:0:0:0): SCB 0x3 - timed out while idle, LASTPHASE == 0x1, SEQADDR == 0x18c (probe0:ahc0:0:0:0): no longer in timeout, status = 34b ahc0: Issued Channel A Bus Reset. 12 SCBs aborted ahc0: Selection Timeout on A:1. 1 SCBs aborted (probe3:ahc0:0:3:0): SCB 0xe - timed out while idle, LASTPHASE == 0x1, SEQADDR == 0x18c (probe3:ahc0:0:3:0): Queuing a BDR SCB (probe3:ahc0:0:3:0): SCB 0xe - timed out while idle, LASTPHASE == 0x1, SEQADDR == 0x18c (probe3:ahc0:0:3:0): no longer in timeout, status = 34b ahc0: Issued Channel A Bus Reset. 11 SCBs aborted (probe4:ahc0:0:4:0): SCB 0xe - timed out while idle, LASTPHASE == 0x1, SEQADDR == 0x18c (probe4:ahc0:0:4:0): Queuing a BDR SCB (probe4:ahc0:0:4:0): SCB 0xe - timed out while idle, LASTPHASE == 0x1, SEQADDR == 0x18c (probe4:ahc0:0:4:0): no longer in timeout, status = 34b ahc0: Issued Channel A Bus Reset. 11 SCBs aborted (probe5:ahc0:0:5:0): SCB 0xe - timed out while idle, LASTPHASE == 0x1, SEQADDR == 0x18c (probe5:ahc0:0:5:0): Queuing a BDR SCB (probe5:ahc0:0:5:0): SCB 0xe - timed out while idle, LASTPHASE == 0x1, SEQADDR == 0x18c (probe5:ahc0:0:5:0): no longer in timeout, status = 34b ahc0: Issued Channel A Bus Reset. 11 SCBs aborted (probe6:ahc0:0:6:0): SCB 0xe - timed out while idle, LASTPHASE == 0x1, SEQADDR == 0x18c (probe6:ahc0:0:6:0): Queuing a BDR SCB (probe6:ahc0:0:6:0): SCB 0xe - timed out while idle, LASTPHASE == 0x1, SEQADDR == 0x18c (probe6:ahc0:0:6:0): no longer in timeout, status = 34b ahc0: Issued Channel A Bus Reset. 11 SCBs aborted ahc0: Selection Timeout on A:8. 1 SCBs aborted ahc0: Selection Timeout on A:9. 1 SCBs aborted (probe9:ahc0:0:10:0): SCB 0xc - timed out while idle, LASTPHASE == 0x1, SEQADDR == 0x18c (probe9:ahc0:0:10:0): Queuing a BDR SCB (probe9:ahc0:0:10:0): SCB 0xc - timed out while idle, LASTPHASE == 0x1, SEQADDR == 0x18c (probe9:ahc0:0:10:0): no longer in timeout, status = 34b ahc0: Issued Channel A Bus Reset. 9 SCBs aborted (probe10:ahc0:0:11:0): SCB 0xc - timed out while idle, LASTPHASE == 0x1, SEQADDR == 0x18c (probe10:ahc0:0:11:0): Queuing a BDR SCB (probe10:ahc0:0:11:0): SCB 0xc - timed out while idle, LASTPHASE == 0x1, SEQADDR == 0x18c (probe10:ahc0:0:11:0): no longer in timeout, status = 34b ahc0: Issued Channel A Bus Reset. 9 SCBs aborted (probe13:ahc0:0:14:0): SCB 0xc - timed out while idle, LASTPHASE == 0x1, SEQADDR == 0x18c (probe13:ahc0:0:14:0): Queuing a BDR SCB (probe13:ahc0:0:14:0): SCB 0xc - timed out while idle, LASTPHASE == 0x1, SEQADDR == 0x18c (probe13:ahc0:0:14:0): no longer in timeout, status = 34b ahc0: Issued Channel A Bus Reset. 9 SCBs aborted (probe14:ahc0:0:15:0): SCB 0xc - timed out while idle, LASTPHASE == 0x1, SEQADDR == 0x18c (probe14:ahc0:0:15:0): Queuing a BDR SCB (probe14:ahc0:0:15:0): SCB 0xc - timed out while idle, LASTPHASE == 0x1, SEQADDR == 0x18c (probe14:ahc0:0:15:0): no longer in timeout, status = 34b ahc0: Issued Channel A Bus Reset. 9 SCBs aborted (probe0:ahc0:0:0:0): SCB 0xc - timed out while idle, LASTPHASE == 0x1, SEQADDR == 0x18c (probe0:ahc0:0:0:0): Queuing a BDR SCB (probe0:ahc0:0:0:0): SCB 0xc - timed out while idle, LASTPHASE == 0x1, SEQADDR == 0x18c (probe0:ahc0:0:0:0): no longer in timeout, status = 34b ahc0: Issued Channel A Bus Reset. 9 SCBs aborted (probe3:ahc0:0:3:0): SCB 0xc - timed out while idle, LASTPHASE == 0x1, SEQADDR == 0x18c (probe3:ahc0:0:3:0): Queuing a BDR SCB (probe3:ahc0:0:3:0): SCB 0xc - timed out while idle, LASTPHASE == 0x1, SEQADDR == 0x18c (probe3:ahc0:0:3:0): no longer in timeout, status = 34b ahc0: Issued Channel A Bus Reset. 9 SCBs aborted (probe4:ahc0:0:4:0): SCB 0xc - timed out while idle, LASTPHASE == 0x1, SEQADDR == 0x18c (probe4:ahc0:0:4:0): Queuing a BDR SCB (probe4:ahc0:0:4:0): SCB 0xc - timed out while idle, LASTPHASE == 0x1, SEQADDR == 0x18c (probe4:ahc0:0:4:0): no longer in timeout, status = 34b ahc0: Issued Channel A Bus Reset. 9 SCBs aborted (probe5:ahc0:0:5:0): SCB 0xc - timed out while idle, LASTPHASE == 0x1, SEQADDR == 0x18c (probe5:ahc0:0:5:0): Queuing a BDR SCB (probe5:ahc0:0:5:0): SCB 0xc - timed out while idle, LASTPHASE == 0x1, SEQADDR == 0x18c (probe5:ahc0:0:5:0): no longer in timeout, status = 34b ahc0: Issued Channel A Bus Reset. 9 SCBs aborted (probe6:ahc0:0:6:0): SCB 0xc - timed out while idle, LASTPHASE == 0x1, SEQADDR == 0x18c (probe6:ahc0:0:6:0): Queuing a BDR SCB (probe6:ahc0:0:6:0): SCB 0xc - timed out while idle, LASTPHASE == 0x1, SEQADDR == 0x18c (probe6:ahc0:0:6:0): no longer in timeout, status = 34b ahc0: Issued Channel A Bus Reset. 9 SCBs aborted ahc0: Selection Timeout on A:10. 1 SCBs aborted ahc0: Selection Timeout on A:11. 1 SCBs aborted (probe13:ahc0:0:14:0): SCB 0x5 - timed out while idle, LASTPHASE == 0x1, SEQADDR == 0x18c (probe13:ahc0:0:14:0): Queuing a BDR SCB (probe13:ahc0:0:14:0): SCB 0x5 - timed out while idle, LASTPHASE == 0x1, SEQADDR == 0x18c (probe13:ahc0:0:14:0): no longer in timeout, status = 34b ahc0: Issued Channel A Bus Reset. 7 SCBs aborted (probe14:ahc0:0:15:0): SCB 0x5 - timed out while idle, LASTPHASE == 0x1, SEQADDR == 0x18c (probe14:ahc0:0:15:0): Queuing a BDR SCB (probe14:ahc0:0:15:0): SCB 0x5 - timed out while idle, LASTPHASE == 0x1, SEQADDR == 0x18c (probe14:ahc0:0:15:0): no longer in timeout, status = 34b ahc0: Issued Channel A Bus Reset. 7 SCBs aborted (probe0:ahc0:0:0:0): SCB 0x5 - timed out while idle, LASTPHASE == 0x1, SEQADDR == 0x18c (probe0:ahc0:0:0:0): Queuing a BDR SCB (probe0:ahc0:0:0:0): SCB 0x5 - timed out while idle, LASTPHASE == 0x1, SEQADDR == 0x18c (probe0:ahc0:0:0:0): no longer in timeout, status = 34b ahc0: Issued Channel A Bus Reset. 7 SCBs aborted (probe3:ahc0:0:3:0): SCB 0x5 - timed out while idle, LASTPHASE == 0x1, SEQADDR == 0x18c (probe3:ahc0:0:3:0): Queuing a BDR SCB (probe3:ahc0:0:3:0): SCB 0x5 - timed out while idle, LASTPHASE == 0x1, SEQADDR == 0x18c (probe3:ahc0:0:3:0): no longer in timeout, status = 34b ahc0: Issued Channel A Bus Reset. 7 SCBs aborted ahc0: Selection Timeout on A:4. 1 SCBs aborted (probe5:ahc0:0:5:0): SCB 0x6 - timed out while idle, LASTPHASE == 0x1, SEQADDR == 0x18c (probe5:ahc0:0:5:0): Queuing a BDR SCB (probe5:ahc0:0:5:0): SCB 0x6 - timed out while idle, LASTPHASE == 0x1, SEQADDR == 0x18c (probe5:ahc0:0:5:0): no longer in timeout, status = 34b ahc0: Issued Channel A Bus Reset. 6 SCBs aborted ahc0: Selection Timeout on A:6. 1 SCBs aborted (probe13:ahc0:0:14:0): SCB 0xb - timed out while idle, LASTPHASE == 0x1, SEQADDR == 0x18c (probe13:ahc0:0:14:0): Queuing a BDR SCB (probe13:ahc0:0:14:0): SCB 0xb - timed out while idle, LASTPHASE == 0x1, SEQADDR == 0x18c (probe13:ahc0:0:14:0): no longer in timeout, status = 34b ahc0: Issued Channel A Bus Reset. 5 SCBs aborted ahc0: Selection Timeout on A:15. 1 SCBs aborted (probe0:ahc0:0:0:0): SCB 0x7 - timed out while idle, LASTPHASE == 0x1, SEQADDR == 0x18c (probe0:ahc0:0:0:0): Queuing a BDR SCB (probe0:ahc0:0:0:0): SCB 0x7 - timed out while idle, LASTPHASE == 0x1, SEQADDR == 0x18c (probe0:ahc0:0:0:0): no longer in timeout, status = 34b ahc0: Issued Channel A Bus Reset. 4 SCBs aborted (probe3:ahc0:0:3:0): SCB 0x7 - timed out while idle, LASTPHASE == 0x1, SEQADDR == 0x18c (probe3:ahc0:0:3:0): Queuing a BDR SCB (probe3:ahc0:0:3:0): SCB 0x7 - timed out while idle, LASTPHASE == 0x1, SEQADDR == 0x18c (probe3:ahc0:0:3:0): no longer in timeout, status = 34b ahc0: Issued Channel A Bus Reset. 3 SCBs aborted ahc0: Selection Timeout on A:5. 1 SCBs aborted (probe13:ahc0:0:14:0): SCB 0x9 - timed out while idle, LASTPHASE == 0x1, SEQADDR == 0x18c (probe13:ahc0:0:14:0): Queuing a BDR SCB (probe13:ahc0:0:14:0): SCB 0x9 - timed out while idle, LASTPHASE == 0x1, SEQADDR == 0x18c (probe13:ahc0:0:14:0): no longer in timeout, status = 34b ahc0: Issued Channel A Bus Reset. 1 SCBs aborted Considering MFS root f/s. No MFS image available as root f/s. Considering FFS root f/s. changing root device to wd0s1a wd0s1: type 0xa5, start 63, end = 16515071, size 16515009 : OK To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-scsi" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.LNX.4.02.9902161714140.25247-100000>