From owner-freebsd-chat Wed Apr 11 14:42:33 2001 Delivered-To: freebsd-chat@freebsd.org Received: from mail.zuhause.org (zuhause.org [205.215.217.178]) by hub.freebsd.org (Postfix) with ESMTP id A205C37B422 for ; Wed, 11 Apr 2001 14:42:31 -0700 (PDT) (envelope-from bruce@zuhause.org) Received: by mail.zuhause.org (Postfix, from userid 1001) id DE6DF7C64; Wed, 11 Apr 2001 16:42:30 -0500 (CDT) From: Bruce Albrecht MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Message-ID: <15060.53190.561343.339737@celery.zuhause.org> Date: Wed, 11 Apr 2001 16:42:30 -0500 (CDT) To: freebsd-chat@freebsd.org Subject: Linux and network cards X-Mailer: VM 6.75 under 21.1 (patch 12) "Channel Islands" XEmacs Lucid Sender: owner-freebsd-chat@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org I was considering sending this to -advocacy or -hardware, but I think this is a better place. In the 4/9/01 issue of Infoworld (http://208.185.149.153/webx?13@137.mBrzaLPgcDU^0@.ee751c7), Nicholas Petreley writes about his problems with Linux and network cards. He could have save himself some exasperation if he knew the rule "hubs are always half-duplex, switches can be either", but that's not my real subject. I don't have any 3Com or Intel NICs, but Petreley claims that he was unable to use his 3C905B cards with his hubs, period, and was only able to use the Intel EEPro 100 NICs after running some diagnostic program to switch them to half-duplex. I know that with FreeBSD, I can configure the card to be either half-duplex, full-duplex or autosense, so one of the following is true: A) These cards are brain-dead, and FreeBSD can't configure them either. B) Linux is brain-dead and can't configure this with ifconfig or whatever their equivalent command. C) Nicholas Petreley doesn't know what he's doing, and should leave system administration to professionals. In the expanded online version, Petreley does talk about setting an option to turn off full-duplex on the cards when setting it up, so it could be either a Linux driver or NIC firmware problem instead of a ID10T problem. Has anyone seen this sort of problem on FreeBSD with either of these network cards? To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-chat" in the body of the message