From owner-freebsd-scsi@FreeBSD.ORG Tue May 4 19:21:19 2010 Return-Path: Delivered-To: freebsd-scsi@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [69.147.83.52]) by hub.freebsd.org (Postfix) with ESMTP id EF594106566C for ; Tue, 4 May 2010 19:21:19 +0000 (UTC) (envelope-from peo@intersonic.se) Received: from neonpark.inter-sonic.com (neonpark.inter-sonic.com [212.247.8.98]) by mx1.freebsd.org (Postfix) with ESMTP id 68CA98FC24 for ; Tue, 4 May 2010 19:21:18 +0000 (UTC) X-Virus-Scanned: amavisd-new at BSDLabs AB Received: from mailrouter.bsdlabs.com ([127.0.0.1]) by mailrouter.bsdlabs.com (mailrouter.bsdlabs.com [127.0.0.1]) (amavisd-new, port 10024) with ESMTP id H7PZQqAMmpOz; Tue, 4 May 2010 21:01:37 +0200 (CEST) Message-ID: <4BE06F10.5080904@intersonic.se> Date: Tue, 04 May 2010 21:01:36 +0200 From: Per olof Ljungmark Organization: Intersonic AB User-Agent: Thunderbird 2.0.0.23 (X11/20091212) MIME-Version: 1.0 To: Scott Long References: <201005041800.o44I08d4017511@freefall.freebsd.org> In-Reply-To: X-Enigmail-Version: 0.95.7 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Cc: freebsd-scsi@freebsd.org Subject: Re: kern/146287: [ciss] ciss(4) cannot see more than one SmartArray controller X-BeenThere: freebsd-scsi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: SCSI subsystem List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 04 May 2010 19:21:20 -0000 Scott Long wrote: > If you can install and boot to the first controller, please run "pciconf -lv" and send me the output. I looks like the linux driver might have a wildcard entry for these controllers, but I want to make sure that I have all of the information before I do something similar for FreeBSD. > > Thanks, > Scott > Yes, there is zero problem with the first, the 6i: pciconf -lv hostb0@pci0:0:0:0: class=0x060000 card=0x32000e11 chip=0x35908086 rev=0x0c hdr=0x00 vendor = 'Intel Corporation' device = 'E7520 Server Memory Controller Hub' class = bridge subclass = HOST-PCI pcib1@pci0:0:2:0: class=0x060400 card=0x00000000 chip=0x35958086 rev=0x0c hdr=0x01 vendor = 'Intel Corporation' device = 'E752x Memory Controller Hub PCIe Port A0' class = bridge subclass = PCI-PCI pcib4@pci0:0:6:0: class=0x060400 card=0x00000000 chip=0x35998086 rev=0x0c hdr=0x01 vendor = 'Intel Corporation' device = 'E752x Memory Controller Hub PCIe Port C0' class = bridge subclass = PCI-PCI uhci0@pci0:0:29:0: class=0x0c0300 card=0x32010e11 chip=0x24d28086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801EB/ER (ICH5/ICH5R) USB UHCI Controller *1' class = serial bus subclass = USB uhci1@pci0:0:29:1: class=0x0c0300 card=0x32010e11 chip=0x24d48086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801EB/ER (ICH5/ICH5R) USB UHCI Controller *2' class = serial bus subclass = USB uhci2@pci0:0:29:2: class=0x0c0300 card=0x32010e11 chip=0x24d78086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801EB/ER (ICH5/ICH5R) USB UHCI Controller *3' class = serial bus subclass = USB uhci3@pci0:0:29:3: class=0x0c0300 card=0x32010e11 chip=0x24de8086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801EB/ER (ICH5/ICH5R) USB UHCI Controller *4' class = serial bus subclass = USB ehci0@pci0:0:29:7: class=0x0c0320 card=0x32010e11 chip=0x24dd8086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801EB/ER (ICH5/ICH5R) USB 2.0 EHCI Controller' class = serial bus subclass = USB pcib8@pci0:0:30:0: class=0x060400 card=0x00000000 chip=0x244e8086 rev=0xc2 hdr=0x01 vendor = 'Intel Corporation' device = '82801 Family (ICH2/3/4/5/6/7/8/9,63xxESB) Hub Interface to PCI Bridge' class = bridge subclass = PCI-PCI isab0@pci0:0:31:0: class=0x060100 card=0x00000000 chip=0x24d08086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801EB/ER (ICH5/ICH5R) LPC Interface Bridge' class = bridge subclass = PCI-ISA atapci0@pci0:0:31:1: class=0x01018a card=0x32010e11 chip=0x24db8086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801EB/ER (ICH5/ICH5R) EIDE Controller' class = mass storage subclass = ATA pcib2@pci0:2:0:0: class=0x060400 card=0x00000000 chip=0x03298086 rev=0x09 hdr=0x01 vendor = 'Intel Corporation' device = 'PCI Express-to-PCI Express Bridge A (6700PXH)' class = bridge subclass = PCI-PCI pcib3@pci0:2:0:2: class=0x060400 card=0x00000000 chip=0x032a8086 rev=0x09 hdr=0x01 vendor = 'Intel Corporation' device = 'PCI Express-to-PCI Express Bridge B (6700PXH)' class = bridge subclass = PCI-PCI bge0@pci0:3:1:0: class=0x020000 card=0x00d00e11 chip=0x164814e4 rev=0x10 hdr=0x00 vendor = 'Broadcom Corporation' device = 'NetXtreme Dual Gigabit Adapter (BCM5704)' class = network subclass = ethernet bge1@pci0:3:1:1: class=0x020000 card=0x00d00e11 chip=0x164814e4 rev=0x10 hdr=0x00 vendor = 'Broadcom Corporation' device = 'NetXtreme Dual Gigabit Adapter (BCM5704)' class = network subclass = ethernet ciss0@pci0:4:3:0: class=0x010400 card=0x40910e11 chip=0x00460e11 rev=0x01 hdr=0x00 vendor = 'Compaq Computer Corp (Now owned by Hewlett-Packard)' device = 'Smart Array 64xx/6i Controller' class = mass storage subclass = RAID pcib5@pci0:5:0:0: class=0x060400 card=0x00000000 chip=0x03298086 rev=0x09 hdr=0x01 vendor = 'Intel Corporation' device = 'PCI Express-to-PCI Express Bridge A (6700PXH)' class = bridge subclass = PCI-PCI pcib7@pci0:5:0:2: class=0x060400 card=0x00000000 chip=0x032a8086 rev=0x09 hdr=0x01 vendor = 'Intel Corporation' device = 'PCI Express-to-PCI Express Bridge B (6700PXH)' class = bridge subclass = PCI-PCI pcib6@pci0:6:2:0: class=0x060400 card=0x00000000 chip=0x01a71014 rev=0x02 hdr=0x01 vendor = 'International Business Machines Corp.' device = 'PCI-X Bridge R1.1 (IBM 133)' class = bridge subclass = PCI-PCI vgapci0@pci0:1:3:0: class=0x030000 card=0x001e0e11 chip=0x47521002 rev=0x27 hdr=0x00 vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' device = 'ATI On-Board VGA for HP Proliant 350 G3 (Rage XL PCI)' class = display subclass = VGA none0@pci0:1:4:0: class=0x088000 card=0xb2060e11 chip=0xb2030e11 rev=0x01 hdr=0x00 vendor = 'Compaq Computer Corp (Now owned by Hewlett-Packard)' device = 'Integrated Lights Out Processor (iLo)' class = base peripheral none1@pci0:1:4:2: class=0x088000 card=0xb2060e11 chip=0xb2040e11 rev=0x01 hdr=0x00 vendor = 'Compaq Computer Corp (Now owned by Hewlett-Packard)' device = 'Integrated Lights Out Processor (iLo)' class = base peripheral > On May 4, 2010, at 12:00 PM, Per olof Ljungmark wrote: > >> The following reply was made to PR kern/146287; it has been noted by GNATS. >> >> From: Per olof Ljungmark >> To: bug-followup@FreeBSD.org, peo@intersonic.se >> Cc: seanbru@yahoo-inc.com >> Subject: Re: kern/146287: [ciss] ciss(4) cannot see more than one SmartArray >> controller >> Date: Tue, 04 May 2010 19:56:19 +0200 >> >> Copyright (c) 1992-2009 The FreeBSD Project. >> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 >> The Regents of the University of California. All rights reserved. >> FreeBSD is a registered trademark of The FreeBSD Foundation. >> FreeBSD 8.0-RELEASE-p2 #0: Tue May 4 00:23:37 CEST 2010 >> peo@lowell.i.inter-sonic.com:/usr/obj/usr/src/sys/GENERIC >> Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff80e1a000. >> Timecounter "i8254" frequency 1193182 Hz quality 0 >> Calibrating TSC clock ... TSC clock: 3400136791 Hz >> CPU: Intel(R) Xeon(TM) CPU 3.40GHz (3400.14-MHz K8-class CPU) >> Origin = "GenuineIntel" Id = 0xf41 Stepping = 1 >> >> Features=0xbfebfbff >> Features2=0x649d >> AMD Features=0x20000800 >> TSC: P-state invariant >> real memory = 12884901888 (12288 MB) >> Physical memory chunk(s): >> 0x0000000000001000 - 0x000000000009bfff, 634880 bytes (155 pages) >> 0x0000000000e51000 - 0x00000000dfff2fff, 3743031296 bytes (913826 pages) >> 0x0000000100000000 - 0x00000003049d6fff, 8667361280 bytes (2116055 pages) >> avail memory = 12349284352 (11777 MB) >> ACPI APIC Table: >> INTR: Adding local APIC 6 as a target >> FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs >> FreeBSD/SMP: 2 package(s) x 1 core(s) x 2 HTT threads >> cpu0 (BSP): APIC ID: 0 >> cpu1 (AP/HT): APIC ID: 1 >> cpu2 (AP): APIC ID: 6 >> cpu3 (AP/HT): APIC ID: 7 >> APIC: CPU 0 has ACPI ID 0 >> APIC: CPU 1 has ACPI ID 1 >> APIC: CPU 2 has ACPI ID 6 >> APIC: CPU 3 has ACPI ID 7 >> ULE: setup cpu 0 >> ULE: setup cpu 1 >> ULE: setup cpu 2 >> ULE: setup cpu 3 >> ACPI: RSDP 0xf4f00 00024 (v2 HP ) >> ACPI: XSDT 0xdfff3300 0004C (v1 HP P51 00000002 �\^D 0000162E) >> ACPI: FACP 0xdfff3380 000F4 (v3 HP P51 00000002 �\^D 0000162E) >> ACPI Warning: Invalid length for Pm1aControlBlock: 32, using default 16 >> 20090521 tbfadt-707 >> ACPI: DSDT 0xdfff3480 02DAB (v1 HP DSDT 00000001 INTL 20030228) >> ACPI: FACS 0xdfff3100 00040 >> ACPI: SPCR 0xdfff3140 00050 (v1 HP SPCRRBSU 00000001 �\^D 0000162E) >> ACPI: MCFG 0xdfff31c0 0003C (v1 HP ProLiant 00000001 00000000) >> ACPI: APIC 0xdfff3200 000C2 (v1 HP 00000083 00000002 00000000) >> ACPI: SSDT 0xdfff8000 004C9 (v1 HP SSDTP 00000001 INTL 20030228) >> MADT: Found IO APIC ID 8, Interrupt 0 at 0xfec00000 >> ioapic0: Routing external 8259A's -> intpin 0 >> MADT: Found IO APIC ID 9, Interrupt 24 at 0xfec80000 >> MADT: Found IO APIC ID 10, Interrupt 48 at 0xfec80400 >> MADT: Found IO APIC ID 11, Interrupt 72 at 0xfec84000 >> MADT: Found IO APIC ID 12, Interrupt 96 at 0xfec84400 >> MADT: Interrupt override: source 0, irq 2 >> ioapic0: Routing IRQ 0 -> intpin 2 >> MADT: Interrupt override: source 9, irq 9 >> ioapic0: intpin 9 trigger: level >> lapic: Routing NMI -> LINT1 >> lapic: LINT1 trigger: edge >> lapic: LINT1 polarity: high >> ioapic0 irqs 0-23 on motherboard >> ioapic1 irqs 24-47 on motherboard >> ioapic2 irqs 48-71 on motherboard >> ioapic3 irqs 72-95 on motherboard >> ioapic4 irqs 96-119 on motherboard >> cpu0 BSP: >> ID: 0x00000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff >> lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff >> timer: 0x000100ef therm: 0x00010000 err: 0x000100f0 pcm: 0x00010400 >> wlan: <802.11 Link Layer> >> null: >> random: >> nfslock: pseudo-device >> kbd: new array size 4 >> kbd1 at kbdmux0 >> mem: >> io: >> hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2 >> acpi0: on motherboard >> PCIe: Memory Mapped configuration base @ 0xe0000000 >> ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48 >> acpi0: [MPSAFE] >> acpi0: [ITHREAD] >> acpi0: Power Button (fixed) >> acpi0: wakeup code va 0xffffff8000025000 pa 0x4000 >> acpi_bus_number: root bus has no _BBN, assuming 0 >> AcpiOsDerivePciId: \\_SB_.PCI0.CFG0.MEM0 -> bus 0 dev 0 func 0 >> acpi_bus_number: root bus has no _BBN, assuming 0 >> AcpiOsDerivePciId: \\_SB_.PCI0.PTC0.PCXC.SHP0 -> bus 5 dev 0 func 0 >> acpi_bus_number: root bus has no _BBN, assuming 0 >> AcpiOsDerivePciId: \\_SB_.PCI0.IBRG.ICH5 -> bus 0 dev 31 func 0 >> ACPI timer: 0/397 0/5 0/5 0/5 0/6 0/5 0/5 0/6 0/5 0/4 -> 0 >> Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 >> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x908-0x90b on acpi0 >> pci_link0: Index IRQ Rtd Ref IRQs >> Initial Probe 0 5 N 0 5 7 10 11 >> Validation 0 5 N 0 5 7 10 11 >> After Disable 0 255 N 0 5 7 10 11 >> pci_link1: Index IRQ Rtd Ref IRQs >> Initial Probe 0 7 N 0 5 7 10 11 >> Validation 0 7 N 0 5 7 10 11 >> After Disable 0 255 N 0 5 7 10 11 >> pci_link2: Index IRQ Rtd Ref IRQs >> Initial Probe 0 7 N 0 5 7 10 11 >> Validation 0 7 N 0 5 7 10 11 >> After Disable 0 255 N 0 5 7 10 11 >> pci_link3: Index IRQ Rtd Ref IRQs >> Initial Probe 0 5 N 0 5 7 10 11 >> Validation 0 5 N 0 5 7 10 11 >> After Disable 0 255 N 0 5 7 10 11 >> pci_link4: Index IRQ Rtd Ref IRQs >> Initial Probe 0 255 N 0 5 7 10 11 >> Validation 0 255 N 0 5 7 10 11 >> After Disable 0 255 N 0 5 7 10 11 >> pci_link5: Index IRQ Rtd Ref IRQs >> Initial Probe 0 5 N 0 5 7 10 11 >> Validation 0 5 N 0 5 7 10 11 >> After Disable 0 255 N 0 5 7 10 11 >> pci_link6: Index IRQ Rtd Ref IRQs >> Initial Probe 0 5 N 0 5 7 10 11 >> Validation 0 5 N 0 5 7 10 11 >> After Disable 0 255 N 0 5 7 10 11 >> pci_link7: Index IRQ Rtd Ref IRQs >> Initial Probe 0 5 N 0 5 7 10 11 >> Validation 0 5 N 0 5 7 10 11 >> After Disable 0 255 N 0 5 7 10 11 >> pcib0: on acpi0 >> pci0: on pcib0 >> pci0: domain=0, physical bus=0 >> found-> vendor=0x8086, dev=0x3590, revid=0x0c >> domain=0, bus=0, slot=0, func=0 >> class=06-00-00, hdrtype=0x00, mfdev=1 >> cmdreg=0x0146, statreg=0x0090, cachelnsz=0 (dwords) >> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) >> found-> vendor=0x8086, dev=0x3595, revid=0x0c >> domain=0, bus=0, slot=2, func=0 >> class=06-04-00, hdrtype=0x01, mfdev=0 >> cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords) >> lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns) >> intpin=a, irq=255 >> powerspec 2 supports D0 D3 current D0 >> MSI supports 2 messages >> found-> vendor=0x8086, dev=0x3599, revid=0x0c >> domain=0, bus=0, slot=6, func=0 >> class=06-04-00, hdrtype=0x01, mfdev=0 >> cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords) >> lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns) >> intpin=a, irq=255 >> powerspec 2 supports D0 D3 current D0 >> MSI supports 2 messages >> found-> vendor=0x8086, dev=0x24d2, revid=0x02 >> domain=0, bus=0, slot=29, func=0 >> class=0c-03-00, hdrtype=0x00, mfdev=1 >> cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) >> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) >> intpin=a, irq=5 >> map[20]: type I/O Port, range 32, base 0x3000, size 5, enabled >> pcib0: matched entry for 0.29.INTA >> pcib0: slot 29 INTA hardwired to IRQ 16 >> found-> vendor=0x8086, dev=0x24d4, revid=0x02 >> domain=0, bus=0, slot=29, func=1 >> class=0c-03-00, hdrtype=0x00, mfdev=0 >> cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) >> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) >> intpin=b, irq=5 >> map[20]: type I/O Port, range 32, base 0x3020, size 5, enabled >> pcib0: matched entry for 0.29.INTB >> pcib0: slot 29 INTB hardwired to IRQ 19 >> found-> vendor=0x8086, dev=0x24d7, revid=0x02 >> domain=0, bus=0, slot=29, func=2 >> class=0c-03-00, hdrtype=0x00, mfdev=0 >> cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) >> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) >> intpin=c, irq=7 >> map[20]: type I/O Port, range 32, base 0x3040, size 5, enabled >> pcib0: matched entry for 0.29.INTC >> pcib0: slot 29 INTC hardwired to IRQ 18 >> found-> vendor=0x8086, dev=0x24de, revid=0x02 >> domain=0, bus=0, slot=29, func=3 >> class=0c-03-00, hdrtype=0x00, mfdev=0 >> cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) >> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) >> intpin=a, irq=5 >> map[20]: type I/O Port, range 32, base 0x3060, size 5, enabled >> pcib0: matched entry for 0.29.INTA >> pcib0: slot 29 INTA hardwired to IRQ 16 >> found-> vendor=0x8086, dev=0x24dd, revid=0x02 >> domain=0, bus=0, slot=29, func=7 >> class=0c-03-20, hdrtype=0x00, mfdev=0 >> cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords) >> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) >> intpin=d, irq=5 >> powerspec 2 supports D0 D3 current D0 >> map[10]: type Memory, range 32, base 0xfbef0000, size 10, enabled >> pcib0: matched entry for 0.29.INTD >> pcib0: slot 29 INTD hardwired to IRQ 23 >> found-> vendor=0x8086, dev=0x244e, revid=0xc2 >> domain=0, bus=0, slot=30, func=0 >> class=06-04-00, hdrtype=0x01, mfdev=0 >> cmdreg=0x0147, statreg=0x0080, cachelnsz=0 (dwords) >> lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns) >> found-> vendor=0x8086, dev=0x24d0, revid=0x02 >> domain=0, bus=0, slot=31, func=0 >> class=06-01-00, hdrtype=0x00, mfdev=1 >> cmdreg=0x014f, statreg=0x0280, cachelnsz=0 (dwords) >> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) >> found-> vendor=0x8086, dev=0x24db, revid=0x02 >> domain=0, bus=0, slot=31, func=1 >> class=01-01-8a, hdrtype=0x00, mfdev=0 >> cmdreg=0x0005, statreg=0x0288, cachelnsz=0 (dwords) >> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) >> intpin=a, irq=255 >> map[20]: type I/O Port, range 32, base 0x500, size 4, enabled >> map[24]: type Memory, range 32, base 0, size 10, memory disabled >> pcib1: at device 2.0 on pci0 >> pcib1: domain 0 >> pcib1: secondary bus 2 >> pcib1: subordinate bus 4 >> pcib1: I/O decode 0x4000-0x4fff >> pcib1: memory decode 0xfdd00000-0xfdefffff >> pcib1: no prefetched decode >> pci2: on pcib1 >> pci2: domain=0, physical bus=2 >> found-> vendor=0x8086, dev=0x0329, revid=0x09 >> domain=0, bus=2, slot=0, func=0 >> class=06-04-00, hdrtype=0x01, mfdev=1 >> cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords) >> lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns) >> powerspec 2 supports D0 D3 current D0 >> MSI supports 1 message, 64 bit >> found-> vendor=0x8086, dev=0x032a, revid=0x09 >> domain=0, bus=2, slot=0, func=2 >> class=06-04-00, hdrtype=0x01, mfdev=1 >> cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords) >> lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns) >> powerspec 2 supports D0 D3 current D0 >> MSI supports 1 message, 64 bit >> pcib2: at device 0.0 on pci2 >> pcib2: domain 0 >> pcib2: secondary bus 3 >> pcib2: subordinate bus 3 >> pcib2: I/O decode 0xf000-0xfff >> pcib2: memory decode 0xfdd00000-0xfddfffff >> pcib2: no prefetched decode >> pci3: on pcib2 >> pci3: domain=0, physical bus=3 >> found-> vendor=0x14e4, dev=0x1648, revid=0x10 >> domain=0, bus=3, slot=1, func=0 >> class=02-00-00, hdrtype=0x00, mfdev=1 >> cmdreg=0x0156, statreg=0x02b0, cachelnsz=16 (dwords) >> lattimer=0x40 (1920 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns) >> intpin=a, irq=7 >> powerspec 2 supports D0 D3 current D0 >> MSI supports 8 messages, 64 bit >> map[10]: type Memory, range 64, base 0xfddf0000, size 16, enabled >> pcib2: requested memory range 0xfddf0000-0xfddfffff: good >> pcib1: requested memory range 0xfddf0000-0xfddfffff: good >> pcib2: matched entry for 3.1.INTA >> pcib2: slot 1 INTA hardwired to IRQ 25 >> found-> vendor=0x14e4, dev=0x1648, revid=0x10 >> domain=0, bus=3, slot=1, func=1 >> class=02-00-00, hdrtype=0x00, mfdev=1 >> cmdreg=0x0156, statreg=0x02b0, cachelnsz=16 (dwords) >> lattimer=0x40 (1920 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns) >> intpin=b, irq=7 >> powerspec 2 supports D0 D3 current D0 >> MSI supports 8 messages, 64 bit >> map[10]: type Memory, range 64, base 0xfdde0000, size 16, enabled >> pcib2: requested memory range 0xfdde0000-0xfddeffff: good >> pcib1: requested memory range 0xfdde0000-0xfddeffff: good >> pcib2: matched entry for 3.1.INTB >> pcib2: slot 1 INTB hardwired to IRQ 26 >> pci0:3:1:0: bad VPD cksum, remain 19 >> bge0: mem >> 0xfddf0000-0xfddfffff irq 25 at device 1.0 on pci3 >> bge0: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xfddf0000 >> bge0: CHIP ID 0x21000000; ASIC REV 0x02; CHIP REV 0x21; PCI-X >> miibus0: on bge0 >> brgphy0: PHY 1 on miibus0 >> brgphy0: OUI 0x000818, model 0x0019, rev. 0 >> brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, >> 1000baseT-FDX, auto >> bge0: bpf attached >> bge0: Ethernet address: 00:12:79:d1:2e:2d >> ioapic1: routing intpin 1 (PCI IRQ 25) to lapic 0 vector 49 >> bge0: [MPSAFE] >> bge0: [ITHREAD] >> pci0:3:1:1: bad VPD cksum, remain 19 >> bge1: mem >> 0xfdde0000-0xfddeffff irq 26 at device 1.1 on pci3 >> bge1: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xfdde0000 >> bge1: CHIP ID 0x21000000; ASIC REV 0x02; CHIP REV 0x21; PCI-X >> miibus1: on bge1 >> brgphy1: PHY 1 on miibus1 >> brgphy1: OUI 0x000818, model 0x0019, rev. 0 >> brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, >> 1000baseT-FDX, auto >> bge1: bpf attached >> bge1: Ethernet address: 00:12:79:d1:2e:2c >> ioapic1: routing intpin 2 (PCI IRQ 26) to lapic 0 vector 50 >> bge1: [MPSAFE] >> bge1: [ITHREAD] >> pcib3: at device 0.2 on pci2 >> pcib3: domain 0 >> pcib3: secondary bus 4 >> pcib3: subordinate bus 4 >> pcib3: I/O decode 0x4000-0x4fff >> pcib3: memory decode 0xfde00000-0xfdefffff >> pcib3: no prefetched decode >> pci4: on pcib3 >> pci4: domain=0, physical bus=4 >> found-> vendor=0x0e11, dev=0x0046, revid=0x01 >> domain=0, bus=4, slot=3, func=0 >> class=01-04-00, hdrtype=0x00, mfdev=0 >> cmdreg=0x0157, statreg=0x0230, cachelnsz=16 (dwords) >> lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) >> intpin=a, irq=5 >> powerspec 2 supports D0 D1 D3 current D0 >> map[10]: type Memory, range 64, base 0xfdef0000, size 13, enabled >> pcib3: requested memory range 0xfdef0000-0xfdef1fff: good >> pcib1: requested memory range 0xfdef0000-0xfdef1fff: good >> map[18]: type I/O Port, range 32, base 0x4000, size 8, enabled >> pcib3: requested I/O range 0x4000-0x40ff: in range >> pcib1: requested I/O range 0x4000-0x40ff: in range >> map[1c]: type Memory, range 64, base 0xfde80000, size 18, enabled >> pcib3: requested memory range 0xfde80000-0xfdebffff: good >> pcib1: requested memory range 0xfde80000-0xfdebffff: good >> pcib3: matched entry for 4.3.INTA >> pcib3: slot 3 INTA hardwired to IRQ 51 >> ciss0: port 0x4000-0x40ff mem >> 0xfdef0000-0xfdef1fff,0xfde80000-0xfdebffff irq 51 at device 3.0 on pci4 >> ciss0: Reserved 0x2000 bytes for rid 0x10 type 3 at 0xfdef0000 >> ciss0: PERFORMANT Transport >> ciss0: got 0 MSI messages] >> ioapic2: routing intpin 3 (PCI IRQ 51) to lapic 0 vector 51 >> ciss0: [MPSAFE] >> ciss0: [ITHREAD] >> ciss0: using 256 of 1024 available commands >> ciss0: firmware 2.84 >> ciss0: 2 SCSI channels >> ciss0: signature 'CISS' >> ciss0: valence 1 >> ciss0: supported I/O methods 0x80000006 >> ciss0: active I/O method 0x5 >> ciss0: 4G page base 0x00000000 >> ciss0: interrupt coalesce delay 0us >> ciss0: interrupt coalesce count 16 >> ciss0: max outstanding commands 1024 >> ciss0: bus types 0x4 >> ciss0: server name '' >> ciss0: heartbeat 0x5c >> ciss0: 6 physical devices >> ciss0: 1 logical drive >> ciss0: logical drive (b0t0): RAID 1, 139776MB online >> pcib4: at device 6.0 on pci0 >> pcib4: domain 0 >> pcib4: secondary bus 5 >> pcib4: subordinate bus 12 >> pcib4: I/O decode 0x5000-0x5fff >> pcib4: memory decode 0xfdf00000-0xfdffffff >> pcib4: no prefetched decode >> pci5: on pcib4 >> pci5: domain=0, physical bus=5 >> found-> vendor=0x8086, dev=0x0329, revid=0x09 >> domain=0, bus=5, slot=0, func=0 >> class=06-04-00, hdrtype=0x01, mfdev=1 >> cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords) >> lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns) >> powerspec 2 supports D0 D3 current D0 >> MSI supports 1 message, 64 bit >> found-> vendor=0x8086, dev=0x032a, revid=0x09 >> domain=0, bus=5, slot=0, func=2 >> class=06-04-00, hdrtype=0x01, mfdev=1 >> cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords) >> lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns) >> powerspec 2 supports D0 D3 current D0 >> MSI supports 1 message, 64 bit >> pcib5: at device 0.0 on pci5 >> pcib5: domain 0 >> pcib5: secondary bus 6 >> pcib5: subordinate bus 9 >> pcib5: I/O decode 0x5000-0x5fff >> pcib5: memory decode 0xfdf00000-0xfdffffff >> pcib5: no prefetched decode >> pci6: on pcib5 >> pci6: domain=0, physical bus=6 >> found-> vendor=0x1014, dev=0x01a7, revid=0x02 >> domain=0, bus=6, slot=2, func=0 >> class=06-04-00, hdrtype=0x01, mfdev=0 >> cmdreg=0x0147, statreg=0x0230, cachelnsz=16 (dwords) >> lattimer=0x40 (1920 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns) >> powerspec 2 supports D0 D3 current D0 >> pcib6: at device 2.0 on pci6 >> pcib6: domain 0 >> pcib6: secondary bus 7 >> pcib6: subordinate bus 7 >> pcib6: I/O decode 0x5000-0x5fff >> pcib6: memory decode 0xfdf00000-0xfdffffff >> pcib6: no prefetched decode >> device_attach: pcib6 attach returned 6 >> pcib7: at device 0.2 on pci5 >> pcib7: domain 0 >> pcib7: secondary bus 10 >> pcib7: subordinate bus 12 >> pcib7: I/O decode 0xf000-0xfff >> pcib7: no prefetched decode >> pci10: on pcib7 >> pci10: domain=0, physical bus=10 >> uhci0: port 0x3000-0x301f >> irq 16 at device 29.0 on pci0 >> uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x3000 >> ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 0 vector 52 >> uhci0: [MPSAFE] >> uhci0: [ITHREAD] >> uhci0: LegSup = 0x003b >> usbus0: on uhci0 >> uhci1: port 0x3020-0x303f >> irq 19 at device 29.1 on pci0 >> uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0x3020 >> ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 0 vector 53 >> uhci1: [MPSAFE] >> uhci1: [ITHREAD] >> uhci1: LegSup = 0x0010 >> usbus1: on uhci1 >> uhci2: port 0x3040-0x305f >> irq 18 at device 29.2 on pci0 >> uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0x3040 >> ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 0 vector 54 >> uhci2: [MPSAFE] >> uhci2: [ITHREAD] >> uhci2: LegSup = 0x0010 >> usbus2: on uhci2 >> uhci3: port 0x3060-0x307f >> irq 16 at device 29.3 on pci0 >> uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0x3060 >> uhci3: [MPSAFE] >> uhci3: [ITHREAD] >> uhci3: LegSup = 0x0010 >> usbus3: on uhci3 >> ehci0: mem >> 0xfbef0000-0xfbef03ff irq 23 at device 29.7 on pci0 >> ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xfbef0000 >> ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 0 vector 55 >> ehci0: [MPSAFE] >> ehci0: [ITHREAD] >> usbus4: EHCI version 1.0 >> usbus4: on ehci0 >> pcib8: at device 30.0 on pci0 >> pcib8: domain 0 >> pcib8: secondary bus 1 >> pcib8: subordinate bus 1 >> pcib8: I/O decode 0x1000-0x2fff >> pcib8: memory decode 0xfbf00000-0xfcffffff >> pcib8: no prefetched decode >> pcib8: Subtractively decoded bridge. >> pci1: on pcib8 >> pci1: domain=0, physical bus=1 >> found-> vendor=0x1002, dev=0x4752, revid=0x27 >> domain=0, bus=1, slot=3, func=0 >> class=03-00-00, hdrtype=0x00, mfdev=0 >> cmdreg=0x0087, statreg=0x0290, cachelnsz=16 (dwords) >> lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) >> powerspec 2 supports D0 D1 D2 D3 current D0 >> map[10]: type Memory, range 32, base 0xfc000000, size 24, enabled >> pcib8: requested memory range 0xfc000000-0xfcffffff: good >> map[14]: type I/O Port, range 32, base 0x2000, size 8, enabled >> pcib8: requested I/O range 0x2000-0x20ff: in range >> map[18]: type Memory, range 32, base 0xfbff0000, size 12, enabled >> pcib8: requested memory range 0xfbff0000-0xfbff0fff: good >> found-> vendor=0x0e11, dev=0xb203, revid=0x01 >> domain=0, bus=1, slot=4, func=0 >> class=08-80-00, hdrtype=0x00, mfdev=1 >> cmdreg=0x0103, statreg=0x0290, cachelnsz=0 (dwords) >> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) >> intpin=a, irq=5 >> powerspec 2 supports D0 D3 current D0 >> map[10]: type I/O Port, range 32, base 0x1800, size 8, enabled >> pcib8: requested I/O range 0x1800-0x18ff: in range >> map[14]: type Memory, range 32, base 0xfbfe0000, size 9, enabled >> pcib8: requested memory range 0xfbfe0000-0xfbfe01ff: good >> pcib8: matched entry for 1.4.INTA >> pcib8: slot 4 INTA hardwired to IRQ 21 >> found-> vendor=0x0e11, dev=0xb204, revid=0x01 >> domain=0, bus=1, slot=4, func=2 >> class=08-80-00, hdrtype=0x00, mfdev=1 >> cmdreg=0x0197, statreg=0x0290, cachelnsz=16 (dwords) >> lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) >> intpin=b, irq=5 >> powerspec 2 supports D0 D3 current D0 >> map[10]: type I/O Port, range 32, base 0x2400, size 8, enabled >> pcib8: requested I/O range 0x2400-0x24ff: in range >> map[14]: type Memory, range 32, base 0xfbfd0000, size 11, enabled >> pcib8: requested memory range 0xfbfd0000-0xfbfd07ff: good >> map[18]: type Memory, range 32, base 0xfbfc0000, size 13, enabled >> pcib8: requested memory range 0xfbfc0000-0xfbfc1fff: good >> map[1c]: type Memory, range 32, base 0xfbf00000, size 19, enabled >> pcib8: requested memory range 0xfbf00000-0xfbf7ffff: good >> pcib8: matched entry for 1.4.INTB >> pcib8: slot 4 INTB hardwired to IRQ 22 >> vgapci0: port 0x2000-0x20ff mem >> 0xfc000000-0xfcffffff,0xfbff0000-0xfbff0fff at device 3.0 on pci1 >> pci1: at device 4.0 (no driver attached) >> pci1: at device 4.2 (no driver attached) >> isab0: at device 31.0 on pci0 >> isa0: on isab0 >> atapci0: port >> 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x500-0x50f at device 31.1 on pci0 >> atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x500 >> ata0: on atapci0 >> atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 >> atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 >> ata0: reset tp1 mask=03 ostat0=50 ostat1=00 >> ata0: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb >> ata0: stat1=0x00 err=0x00 lsb=0x00 msb=0x00 >> ata0: reset tp2 stat0=00 stat1=00 devices=0x10000 >> ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 0 vector 56 >> ata0: [MPSAFE] >> ata0: [ITHREAD] >> ata1: on atapci0 >> atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 >> atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 >> ata1: reset tp1 mask=03 ostat0=00 ostat1=00 >> ata1: stat0=0x01 err=0x01 lsb=0x01 msb=0x01 >> ata1: stat1=0x01 err=0x01 lsb=0x01 msb=0x01 >> ata1: reset tp2 stat0=01 stat1=01 devices=0x0 >> ioapic0: routing intpin 15 (ISA IRQ 15) to lapic 0 vector 57 >> ata1: [MPSAFE] >> ata1: [ITHREAD] >> acpi_tz0: on acpi0 >> atkbdc0: port 0x60,0x64 irq 1 on acpi0 >> atkbd0: irq 1 on atkbdc0 >> atkbd: the current kbd controller command byte 0065 >> atkbd: keyboard ID 0x41ab (2) >> kbd0 at atkbd0 >> kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 >> ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 58 >> atkbd0: [GIANT-LOCKED] >> atkbd0: [ITHREAD] >> psm0: unable to allocate IRQ >> psmcpnp0: irq 12 on acpi0 >> psm0: current command byte:0065 >> psm0: irq 12 on atkbdc0 >> ioapic0: routing intpin 12 (ISA IRQ 12) to lapic 0 vector 59 >> psm0: [GIANT-LOCKED] >> psm0: [ITHREAD] >> psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons >> psm0: config:00000000, flags:00000008, packet size:3 >> psm0: syncmask:c0, syncbits:00 >> uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 >> ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 0 vector 60 >> uart0: [FILTER] >> uart0: fast interrupt >> fdc0: port 0x3f2-0x3f5 irq 6 drq 2 on acpi0 >> fdc0: ic_type 90 part_id 73 >> ioapic0: routing intpin 6 (ISA IRQ 6) to lapic 0 vector 61 >> fdc0: [FILTER] >> fd0: <1440-KB 3.5" drive> on fdc0 drive 0 >> cpu0: on acpi0 >> ACPI: SSDT 0xdfff9000 002DA (v1 HP SSDT0 00000001 INTL 20030228) >> cpu0: switching to generic Cx mode >> acpi_perf0: on cpu0 >> p4tcc0: on cpu0 >> cpu1: on acpi0 >> ACPI: SSDT 0xdfff9300 002DA (v1 HP SSDT1 00000001 INTL 20030228) >> est1: on cpu1 >> est: CPU supports Enhanced Speedstep, but is not recognized. >> est: cpu_vendor GenuineIntel, msr 112d0000112d >> device_attach: est1 attach returned 6 >> p4tcc1: on cpu1 >> cpu2: on acpi0 >> ACPI: SSDT 0xdfff9600 002DA (v1 HP SSDT2 00000001 INTL 20030228) >> est2: on cpu2 >> est: CPU supports Enhanced Speedstep, but is not recognized. >> est: cpu_vendor GenuineIntel, msr 112d0000112d >> device_attach: est2 attach returned 6 >> p4tcc2: on cpu2 >> cpu3: on acpi0 >> ACPI: SSDT 0xdfff9900 002DF (v1 HP SSDT3 00000001 INTL 20030228) >> est3: on cpu3 >> est: CPU supports Enhanced Speedstep, but is not recognized. >> est: cpu_vendor GenuineIntel, msr 112d0000112d >> device_attach: est3 attach returned 6 >> p4tcc3: on cpu3 >> ahc_isa_probe 0: ioport 0xc00 alloc failed >> ex_isa_identify() >> isa_probe_children: disabling PnP devices >> atkbdc: atkbdc0 already exists; skipping it >> fdc: fdc0 already exists; skipping it >> sc: sc0 already exists; skipping it >> uart: uart0 already exists; skipping it >> isa_probe_children: probing non-PnP devices >> orm0: at iomem >> 0xc0000-0xc7fff,0xc8000-0xcbfff,0xee000-0xeffff on isa0 >> sc0: at flags 0x100 on isa0 >> sc0: VGA <16 virtual consoles, flags=0x300> >> sc0: fb0, kbd1, terminal emulator: scteken (teken terminal) >> vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 >> atrtc0: at port 0x70 irq 8 on isa0 >> atrtc0: registered as a time-of-day clock (resolution 1000000us) >> ppc0: cannot reserve I/O port range >> ppc0: failed to probe at irq 7 on isa0 >> uart1: at port 0x2f8-0x2ff >> irq 3 on isa0 >> ioapic0: routing intpin 3 (ISA IRQ 3) to lapic 0 vector 62 >> uart1: [FILTER] >> uart1: fast interrupt >> isa_probe_children: probing PnP devices >> Device configuration finished. >> Reducing kern.maxvnodes 763673 -> 100000 >> procfs registered >> lapic: Divisor 2, Frequency 100004020 hz >> Timecounter "TSC" frequency 3400136791 Hz quality -100 >> Timecounters tick every 1.000 msec >> lo0: bpf attached >> hptrr: no controller detected. >> ata0: Identifying devices: 00010000 >> ata0: New devices: 00010000 >> fdc0: output ready timeout >> fdc0: output ready timeout >> fdc0: output ready timeout >> fdc0: output ready timeout >> fdc0: output ready timeout >> fdc0: output ready timeout >> fdc0: output ready timeout >> usbus0: 12Mbps Full Speed USB v1.0 >> usbus1: 12Mbps Full Speed USB v1.0 >> usbus2: 12Mbps Full Speed USB v1.0 >> usbus3: 12Mbps Full Speed USB v1.0 >> usbus4: 480Mbps High Speed USB v2.0 >> ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire >> acd0: setting PIO4 on ICH5 chip >> acd0: setting UDMA33 on ICH5 chip >> ugen0.1: at usbus0 >> uhub0: on usbus0 >> ugen1.1: at usbus1 >> uhub1: on usbus1 >> ugen2.1: at usbus2 >> uhub2: on usbus2 >> ugen3.1: at usbus3 >> uhub3: on usbus3 >> ugen4.1: at usbus4 >> uhub4: on usbus4 >> acd0: CDRW drive at ata0 as master >> acd0: read 4134KB/s (4134KB/s) write 4134KB/s (4134KB/s), 2048KB buffer, >> UDMA33 >> acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet >> acd0: Writes: CDR, CDRW, test write, burnproof >> acd0: Audio: play, 256 volume levels >> acd0: Mechanism: ejectable tray, unlocked >> acd0: Medium: no/blank disc >> ata1: Identifying devices: 00000000 >> ata1: New devices: 00000000 >> uhub0: 2 ports with 2 removable, self powered >> uhub1: 2 ports with 2 removable, self powered >> uhub2: 2 ports with 2 removable, self powered >> uhub3: 2 ports with 2 removable, self powered >> fdc0: output ready timeout >> fdc0: input ready timeout >> fdc0: input ready timeout >> fdc0: output ready timeout >> fdc0: input ready timeout >> fdc0: input ready timeout >> fdc0: output ready timeout >> fdc0: input ready timeout >> fdc0: input ready timeout >> fdc0: output ready timeout >> fdc0: input ready timeout >> fdc0: input ready timeout >> da0 at ciss0 bus 0 target 0 lun 0 >> da0: Fixed Direct Access SCSI-4 device >> da0: 135.168MB/s transfers >> da0: Command Queueing enabled >> da0: 140002MB (286726080 512 byte sectors: 255H 32S/T 35138C) >> pass0 at ciss0 bus 0 target 0 lun 0 >> pass0: Fixed Direct Access SCSI-4 device >> pass0: 135.168MB/s transfers >> pass0: Command Queueing enabled >> pass1 at ciss0 bus 33 target 0 lun 0 >> pass1: Fixed Uninstalled SCSI-3 device >> pass1: Serial Number 3KT5ABMQ000077052PVP >> pass1: 135.168MB/s transfers >> pass1: Command Queueing enabled >> pass2 at ciss0 bus 33 target 1 lun 0 >> pass2: Fixed Uninstalled SCSI-3 device >> pass2: Serial Number 3KT65G0300009740UG3C >> pass2: 135.168MB/s transfers >> pass2: Command Queueing enabled >> pass3 at ciss0 bus 33 target 2 lun 0 >> pass3: Fixed Uninstalled SCSI-3 device >> pass3: Serial Number 3KT65G7800009740W27L >> pass3: 135.168MB/s transfers >> pass3: Command Queueing enabled >> pass4 at ciss0 bus 33 target 3 lun 0 >> pass4: Fixed Uninstalled SCSI-3 device >> pass4: Serial Number 3KT2W9ZB00007616NLEN >> pass4: 135.168MB/s transfers >> pass4: Command Queueing enabled >> pass5 at ciss0 bus 33 target 4 lun 0 >> pass5: Fixed Uninstalled SCSI-3 device >> pass5: Serial Number 3KT18LBP0000754281N7 >> pass5: 135.168MB/s transfers >> pass5: Command Queueing enabled >> pass6 at ciss0 bus 33 target 7 lun 0 >> pass6: Fixed Processor SCSI-2 device >> pass6: 135.168MB/s transfers >> ATA PseudoRAID loaded >> SMP: AP CPU #1 Launched! >> cpu1 AP: >> ID: 0x01000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff >> lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff >> timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400 >> SMP: AP CPU #2 Launched! >> cpu2 AP: >> ID: 0x06000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff >> lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff >> timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400 >> SMP: AP CPU #3 Launched! >> cpu3 AP: >> ID: 0x07000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff >> lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff >> timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400 >> ioapic0: routing intpin 3 (ISA IRQ 3) to lapic 6 vector 48 >> ioapic0: routing intpin 6 (ISA IRQ 6) to lapic 6 vector 49 >> ioapic0: routing intpin 12 (ISA IRQ 12) to lapic 6 vector 50 >> ioapic0: routing intpin 15 (ISA IRQ 15) to lapic 6 vector 51 >> ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 6 vector 52 >> ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 6 vector 53 >> ioapic1: routing intpin 2 (PCI IRQ 26) to lapic 6 vector 54 >> uhub4: 8 ports with 8 removable, self powered >> ugen2.2: at usbus2 >> ukbd0: >> on usbus2 >> kbd2 at ukbd0 >> kbd2: ukbd0, generic (0), config:0x0, flags:0x3d0000 >> ums0: >> on usbus2 >> ums0: 5 buttons and [XYZ] coordinates ID=1 >> GEOM: new disk da0 >> Trying to mount root from ufs:/dev/da0s1a >> ct_to_ts([2010-05-04 17:49:30]) = 1272995370.000000000 >> start_init: trying /sbin/init >> bge0: >> bge0: link state changed to UP >> link UP >> >> _______________________________________________ >> freebsd-scsi@freebsd.org mailing list >> http://lists.freebsd.org/mailman/listinfo/freebsd-scsi >> To unsubscribe, send any mail to "freebsd-scsi-unsubscribe@freebsd.org" >