From owner-freebsd-questions Thu Dec 2 12:55:54 1999 Delivered-To: freebsd-questions@freebsd.org Received: from garcon.qtm.net (qtm.net [206.53.233.50]) by hub.freebsd.org (Postfix) with ESMTP id DC6B714EC7 for ; Thu, 2 Dec 1999 12:55:48 -0800 (PST) (envelope-from jay@qtm.net) Received: from ENFORCER (enforcer.qtm.net [216.163.32.5]) by garcon.qtm.net (8.9.1/8.9.1) with SMTP id PAA25494 for ; Thu, 2 Dec 1999 15:55:52 -0500 (EST) From: "Network Admin [JPeterson]" To: Subject: AMI MegaRAID and FreeBSD Date: Thu, 2 Dec 1999 15:55:46 -0500 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2910.0) X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2919.6600 Importance: Normal Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG We recently purchased a Dell PowerEdge 2300 and wish to run FreeBSD on it. I was unable to get FreeBSD to recognize the RAID drives, however RedHat 6.0 was able to see it.. Does anyone have any ideas on how to get FreeBSD to be able to utilize the RAID array? The hardware card controls the RAID so BSD should only see it as one big drive and send stuff to it via the card.. RedHat sees the controller as an AMI MegaRAID Thanks! - Below is the bootup information that I am shown by the controllers PowerEdge Expandable RAID Controller BIOS1.25 May 27, 1998 Compyright(c) AMERICAN MEGATRENDS INC. Press to Run Configuration Utility Host Adapter-0 Type : PERC 2/SC. Firmware Version ED4D DRAM Size =16MB 1 Logical Drives found on the Host Adapter 1 Logicam Drive(s) handled by BIOS. Also we have: Adaptec AIC-7890 (empty) Adaptec AIC-7860 (with SCSI CD-Rom and SCSI 12/24Gig Tape) To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message