Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 25 Aug 2020 09:41:41 +0200
From:      Hans Petter Selasky <hps@selasky.org>
To:        bob prohaska <fbsd@www.zefox.net>
Cc:        freebsd-arm@freebsd.org, freebsd-current@freebsd.org
Subject:   Re: Strange USB loop
Message-ID:  <8be06d6f-9837-cde6-1878-a25e84656d84@selasky.org>
In-Reply-To: <20200825050304.GA11333@www.zefox.net>
References:  <20200824163736.GA9845@www.zefox.net> <42038cfd-425c-c5cd-d3de-d3cace1ecd89@selasky.org> <20200825050304.GA11333@www.zefox.net>

next in thread | previous in thread | raw e-mail | index | archive | help
On 2020-08-25 07:03, bob prohaska wrote:
> On Tue, Aug 25, 2020 at 12:46:01AM +0200, Hans Petter Selasky wrote:
>> On 2020-08-24 18:37, bob prohaska wrote:
>>> After updating to
>>> FreeBSD 13.0-CURRENT (GENERIC) #5 r364475: Mon Aug 24 06:47:29 PDT 2020
>>> on a Pi3 it was necessary to disconnect the mouse, keyboard and usb-serial
>>
>> You are after:
>>
>> https://svnweb.freebsd.org/changeset/base/364433
>>
>> You may want to try a kernel before:
>>
>> r364379

Can you try r364346 ?

> A kernel for
> FreeBSD 13.0-CURRENT (GENERIC) #6 r364378: Tue Aug 25 00:46:27 PDT 2020
> compiled and installed without incident, but the problem persists. This
> time I plugged the keyboard into the hub and got a stream of
> uhub_reattach_port: giving up port reset - device vanished
> which didn't stop when the keyboard was removed. If the keyboard is
> moved to the Pi's internal USB connectors the keyboard is recognized
> and works, but the once-per-second "...device vanished" messages continue.
> 
> Attempts to repeat this behavior were frustrating. After a few iterations
> the error message was triggered by plugging in an FTDI usb-serial adapter,
> but the messages stopped when it was unplugged.
> 
> The hub is
> Bus /dev/usb Device /dev/ugen1.4: ID 05e3:0610 Genesys Logic, Inc. 4-port hub
> 
> The disk adapter is
> Bus /dev/usb Device /dev/ugen1.5: ID 152d:1561 JMicron Technology Corp. / JMicron USA Technology Corp. JMS561U two ports SATA 6Gb/s bridge
> 
> Are either of these known troublmakers?

--HPS



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?8be06d6f-9837-cde6-1878-a25e84656d84>