Skip site navigation (1)Skip section navigation (2)
Date:      Sat, 3 Nov 2007 09:59:40 -0500 (CDT)
From:      "Sean C. Farley" <scf@FreeBSD.org>
To:        "Aryeh M. Friedman" <aryeh.friedman@gmail.com>
Cc:        freebsd-current@FreeBSD.org, samira <samira.nox@gmail.com>
Subject:   Re: sata atapi on ich9r
Message-ID:  <alpine.BSF.0.9999.0711030941540.3377@thor.farley.org>
In-Reply-To: <472C3569.3050301@gmail.com>
References:  <op.t07skxg4godk2w@localhost> <472C3569.3050301@gmail.com>

next in thread | previous in thread | raw e-mail | index | archive | help
On Sat, 3 Nov 2007, Aryeh M. Friedman wrote:

*snip*

> Note to the development team:   No I was not tripping when I reported
> these same issues just unable to provide proof

I guarantee you are not tripping.  :(

> Note to sam: Do you have any development experience if so I invite you
> to help me in my current project to patch the ata driver to fix all
> these issues (the ata developer told me since he doesn't have access to
> a ich9r/p35 system no patch and/or cvsup would be forth coming on these
> issues)... I am also a developer but at the moment am very tied up with
> making a living so I will give what help I can but can't do the whole
> project alone

I can try to help, but I am also busy (crunch-time at work).

My system is an Asus P5K-E/WiFi with a DVDR <LITE-ON DVDRW
LH-20A1S/9L08>.  It has 4GB RAM and two SATA hard drives.  I have no
PATA drives in it.  It is running in RAID mode.

Unfortunately, this is my only workstation at home, so I will not be
changing versions.  I am willing to make changes to the driver.  Here is
a patch[1] to recognize and print the ICH9R during boot.  It does not
change anything functionally.

My current notes:
1. burncd (without atapicam loaded), cdrecord and dd can all produce
    warnings.
    dd if=/dev/acd0 of=/dev/null bs=10M count=1

2. sysinstall will fail during install when copying GENERIC kernel.
    This was on my work computer in a Dell Optiplex 745 with 1GB RAM.
    atapci0: <Intel ICH8 SATA300 controller>
    acd0: CDRW <HL-DT-ST CD-RW/DVD-ROM GCC-H10N/C103> at ata3-master SATA150

3. Do not detach a channel with atacontrol.  I tried that on the channel
    with the DVD drive.  Panic.

4. I am thinking about writing a program to perform simple tests on the
    ATAPI ioctl's.  Maybe one exists?

5. PATA is not related since I have no PATA drives in my computer.

*downgrade to 6.2 AMD64 snipped*

Sean
   1. http://www.farley.org/freebsd/tmp/ata-chipset.c.diff
-- 
scf@FreeBSD.org



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?alpine.BSF.0.9999.0711030941540.3377>