Date: Thu, 5 Jan 2006 17:13:56 +0200 From: Leonidas Tsampros <ltsampros@upnet.gr> To: Frank Staals <frankstaals@gmx.net> Cc: questions@freebsd.org Subject: Re: Problem burning/mounting cd-rom Message-ID: <20060105151356.GA12506@bifteki.lan> In-Reply-To: <43BD35B3.9030605@gmx.net> References: <43BD1530.2080909@gmx.net> <20060105144041.GA12133@bifteki.lan> <43BD35B3.9030605@gmx.net>
next in thread | previous in thread | raw e-mail | index | archive | help
On Thu, Jan 05, 2006 at 04:05:23PM +0100, Frank Staals wrote: > Leonidas Tsampros wrote: > > >On Thu, Jan 05, 2006 at 01:46:40PM +0100, Frank Staals wrote: > > > > > >>Hey, > >> > >>I have an Acer Aspire 1356 LCi laptop with a CD-RW/DVD-drive in it so I > >>can burn cds and read DVD's and cd's. But when I tried to burn and mount > >>a datadisk this happend: > >> > >>frank@Riza$ mkisofs -o tmp1.iso VirtualDub-1.6.11.zip totaal.wmv > >>24.61% done, estimate finish Thu Jan 5 13:37:10 2006 > >>49.25% done, estimate finish Thu Jan 5 13:37:10 2006 > >>73.82% done, estimate finish Thu Jan 5 13:37:10 2006 > >>98.49% done, estimate finish Thu Jan 5 13:37:10 2006 > >>Total translation table size: 0 > >>Total rockridge attributes bytes: 0 > >>Total directory bytes: 0 > >>Path table size(bytes): 10 > >>Max brk space used 8724 > >>20320 extents written (39 MB) > >>frank@Riza$ > >> > >>root@Riza# burncd -f /dev/acd0 -s 12 data tmp1.iso fixate > >>next writeable LBA 0 > >>writing from file tmp1.iso size 40640 KB > >>written this track 40640 KB (100%) total 40640 KB > >>fixating CD, please wait.. > >> > >> > >>root@Riza# mount_cd9660 -v /dev/acd0 /mnt/dvd/ > >>could not determine starting sector, using very first session > >>mount_cd9660: /dev/acd0: Input/output error > >>root@Riza# > >> > >>I'm using a Philips CD-RW which I cleaned before use with: > >> > >>root@Riza# burncd -f /dev/acd0 erase > >>erasing CD - 99 % done > >> > >>I tried searching what I could do about it, but I couldn't realy find > >>something usefull. It seems that something goes wrong with burning the > >>CD I guess ( looking at the output when trying to mount it ) but I'm not > >>sure what I do wrong. Everything worked fine up until today. I hope > >>someone can point out what I can do about it. > >> > >>Thanks in advance, > >> > >> > >> > > > >The overall process seems to ended quite succesfully. Just try to > >eject the cd before mounting the fresh cd that you burned. I had > >similar issues very recently and this was the solution for me. > > > >If you are bored to death, try these: > > > ># burncd -f /dev/acd0 (blabla) > >(wait to finish) > > > ># cdcontrol -f /dev/acd0 eject > ># cdcontrol -f /dev/acd0 close > ># mount_cd9660 -v /dev/acd0 /mnt/dvd > > > > > > > > > Hmm I got a little bit further indeed, but it still won't mount > > <burned the cd> > > root@Riza# cdcontrol -f /dev/acd0 eject > > <manually pushed the cd-drive back ( since it is a laptop ) > > > root@Riza# mount_cd9660 -v /dev/acd0 /mnt/dvd/ > using starting sector 0 > mount_cd9660: /dev/acd0: Input/output error > root@Riza# > > Have you checked dmesg for any useful messages ? If there are any, post them in case they shed some light on your scenario.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20060105151356.GA12506>