Date: Thu, 19 Oct 2000 10:32:37 -0400 From: Ian Cartwright <ICartwright@IT.RJF.com> To: "FreeBSD Questions (E-mail)" <freebsd-questions@FreeBSD.ORG>, "'freebsd-hardware@freebsd.org'" <freebsd-hardware@freebsd.org> Subject: Intel Etherexpress Timeouts Message-ID: <6D5097D4B56AD31190D50008C7B1579BC97C67@exlan5.rjf.com>
next in thread | raw e-mail | index | archive | help
Hello all,
I recently installed FreeBSD 4.11-RELEASE on a new Compaq Deskpro EN. It has
an Intel Etherexpress Pro 100 built into the motherboard. After compiling a
new kernel (-STABLE) for it, the NIC is detected. I do have one problem with
the NIC though: I keep getting timeout errors. Sometimes the NIC comes back,
sometimes I have to reboot...
I have included output from dmesg. Any help would be appreciated...
Ian Cartwright
Senior Network Engineer
Raymond James & Associates
icartwright@it.rjf.com
dmesg output follows:
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.1.1-STABLE #0: Thu Oct 12 10:44:34 EDT 2000
root@ian.batcave.com:/usr/src/sys/compile/compaq.411
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (797.42-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x683 Stepping = 3
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,
CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 536870912 (524288K bytes)
avail memory = 519147520 (506980K bytes)
Preloaded elf kernel "kernel" at 0xc0397000.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <PCI to PCI bridge (vendor=8086 device=1131)> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <NVidia Riva TNT2 graphics accelerator> at 0.0 irq 10
pcib2: <PCI to PCI bridge (vendor=8086 device=244e)> at device 30.0 on pci0
pci2: <PCI bus> on pcib2
fxp0: <Intel PLC 10/100 Ethernet> port 0x1000-0x103f mem
0x40000000-0x40000fff irq 5 at device 8.0 on pci2
fxp0: Ethernet address 00:50:8b:f7:83:c2
isab0: <PCI to ISA bridge (vendor=8086 device=2440)> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH2 ATA100 controller> port 0x2460-0x246f at device 31.1 on
pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <UHCI (generic) USB controller> port 0x2440-0x245f irq 11 at device
31.4 on pci0
uhci0: (New UHCI DeviceId=0x24448086)
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: (0x24448086) UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <unknown card> (vendor=0x8086, dev=0x2445) at 31.5 irq 11
isa0: unexpected small tag 14
isa0: unexpected small tag 14
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/13 bytes threshold
ppi0: <Parallel I/O> on ppbus0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
unknown: <PNP0401> can't assign resources
unknown: <PNP0501> can't assign resources
unknown: <PNP0501> can't assign resources
unknown: <PNP0700> can't assign resources
unknown: <PNP0000> can't assign resources
unknown: <PNP0303> can't assign resources
unknown: <PNP0f13> can't assign resources
ad0: 14324MB <ST315324A> [29104/16/63] at ata0-master using UDMA100
acd0: CDROM <COMPAQ SC-148F> at ata1-master using WDMA2
Mounting root from ufs:/dev/ad0s1a
fxp0: device timeout
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?6D5097D4B56AD31190D50008C7B1579BC97C67>