Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 02 Apr 2013 10:20:35 -0400
From:      Karim Fodil-Lemelin <fodillemlinkarim@gmail.com>
To:        Nick Rogers <ncrogers@gmail.com>
Cc:        "freebsd-net@freebsd.org" <freebsd-net@freebsd.org>
Subject:   Re: igb and ALTQ in 9.1-rc3
Message-ID:  <515AE933.7020806@gmail.com>
In-Reply-To: <CAKOb=Ybh=_w5ZSB%2B64bxpzBanheJvMhwd9Pus7sJet9ihn5jSA@mail.gmail.com>
References:  <1355177348.71087.YahooMailClassic@web121601.mail.ne1.yahoo.com> <50C6656E.3020601@gmail.com> <CAFOYbc=79HwkHm6PAyRba%2Bue_7Xq0dUJvLk48RwqUN0Oz6%2BVFw@mail.gmail.com> <20121211075853.GU48639@FreeBSD.org> <CAFOYbc=Yh3WiUDstjSm-AUz4WMF9VteiydcEb5opnJ_gT4F7ag@mail.gmail.com> <CAKOb=Yb7NMm26=u%2B-0ywMk543WdXc5uiO2omY4=TXpRxPrOWHg@mail.gmail.com> <CAFOYbcn3HpRaaoSPWF5OL6QJCec-Zb2%2BNySqjgqyOXHRaXD26Q@mail.gmail.com> <5159AB72.1050202@gmail.com> <CAKOb=YbDW2kMhnAPUetsGeNdtiaOCOmQ2X-9GXW18wwSUZ8j-A@mail.gmail.com> <515ADACD.8010108@gmail.com> <CAKOb=Ybh=_w5ZSB%2B64bxpzBanheJvMhwd9Pus7sJet9ihn5jSA@mail.gmail.com>

next in thread | previous in thread | raw e-mail | index | archive | help
Hi Nick,

You need to set the ALTQF_READY flag inside the igb driver. Make sure 
you have something like this in if_igb.c:

     ifp->if_start = igb_start;
     IFQ_SET_MAXLEN(&ifp->if_snd, adapter->num_tx_desc - 1);
     ifp->if_snd.ifq_drv_maxlen = adapter->num_tx_desc - 1;
     IFQ_SET_READY(&ifp->if_snd);

The call to IFQ_SET_READY() is what will enable ALTQ on your device.

Regards,

Karim.

On 02/04/2013 9:58 AM, Nick Rogers wrote:
> On Tuesday, April 2, 2013, Karim Fodil-Lemelin wrote:
>
>> Hi Nick,
>>
>> Can you verify that you have at least one of those options in your kernel
>> config file:
>>
>> ALTQ_CBQ
>> ALTQ_PRIQ
>> ALTQ_HFSC
>
> Yes I have hfsc included in the kernel. I have other machines using altq
> with em(4) interfaces and similar pf configurations on the same kernel that
> work fine.
>
>
>> Regards,
>>
>> Karim.
>>
>> On 01/04/2013 8:22 PM, Nick Rogers wrote:
>>
>> On Mon, Apr 1, 2013 at 8:44 AM, Karim Fodil-Lemelin
>> <fodillemlinkarim@gmail.com> wrote:
>>
>> Hi Jack,
>>
>> I think this would help M. Rogers case as we have done something similar
>> here to circumvent the issue and it seems to work well. I would also add
>> that when using ALTQ we found it much more stable to set the number of
>> queues to 1:
>>
>> static int igb_num_queues = 1;
>>
>> Our approach consisted in keeping igb_start() defined and using
>> igb_mq_start_locked() inside it instead of igb_start_locked().
>>
>> Regards,
>>
>> Karim.
>>
>> Thanks for the pointer.
>>
>> I've been working with Jack to get a fix for this in that downgrades
>> the stack to the older if_start/non-multiqueue interface. See the
>> following two commits he made to HEAD.
>>
>> http://svnweb.freebsd.org/**base/head/sys/dev/e1000/if_**
>> igb.c?revision=248906&view=**markup<http://svnweb.freebsd.org/base/head/sys/dev/e1000/if_igb.c?revision=248906&view=markup>;
>> http://svnweb.freebsd.org/**base/head/sys/dev/e1000/if_**
>> igb.h?revision=248908&view=**markup<http://svnweb.freebsd.org/base/head/sys/dev/e1000/if_igb.h?revision=248908&view=markup>;
>>
>> I've applied these changes to latest 9.1-STABLE src and included the
>> IGB_LEGACY_TX in the e1000 Makefile. So far I am not having any luck
>> getting pfctl to think igb is supported.
>>
>> i.e. I am still getting the following when loading my PF config:
>> pfctl -f /etc/pf.conf
>> pfctl: igb0: driver does not support altq
>>
>> Can anyone comment on if the above referenced changes that Jack made
>> should be sufficient to get ALTQ working with igb?
>>
>> The error is coming from src/contrib/pf/pfctl/pfctl.c. There seems to
>> be a function that checks if the driver is supported or not but I
>> cannot figure out why the ioctl is not returning a device.
>>
>> Here is the device check code for reference:
>>
>> int
>> pfctl_add_altq(struct pfctl *pf, struct pf_altq *a)
>> {
>>           if (altqsupport &&
>>               (loadopt & PFCTL_FLAG_ALTQ) != 0) {
>>                   memcpy(&pf->paltq->altq, a, sizeof(struct pf_altq));
>>                   if ((pf->opts & PF_OPT_NOACTION) == 0) {
>>                           if (ioctl(pf->dev, DIOCADDALTQ, pf->paltq)) {
>>                                   if (errno == ENXIO)
>>                                           errx(1, "qtype not configured");
>>                                   else if (errno == ENODEV)
>>                                           errx(1, "%s: driver does not
>> support "
>>                                               "altq", a->ifname);
>>                                   else
>>                                           err(1, "DIOCADDALTQ");
>>                           }
>>                   }
>>                   pfaltq_store(&pf->paltq->altq)**;
>>           }
>>           return (0);
>> }
>>
>>
>>
>>
>>
>> On 28/03/2013 7:16 PM, Jack Vogel wrote:
>>
>> Have been kept fairly busy with other matters, one thing I could do short
>> term is
>> change the defines in igb the way I did in the em driver so you could
>> still
>> define
>> the older if_start entry. Right now those are based on OS version and so
>> you will
>> automatically get if_transmit, but I could change it to be IGB_LEGACY_TX
>> or
>> so,
>> and that could be defined in the Makefile.
>>
>> Would this help?
>>
>> Jack
>>
>>
>> On Thu, Mar 28, 2013 at 2:31 PM, Nick Rogers <ncrogers@gmail.com> wrote:
>>
>>   On Tue, Dec 11, 2012 at 1:09 AM, Jack Vogel <jfvogel@gmail.com> wrote:
>>
>> On Mon, Dec 10, 2012 at 11:58 PM, Gleb Smirnoff <glebius@freebsd.org>
>>
>> wrote:
>>
>> On Mon, Dec 10, 2012 at 03:31:19PM -0800, Jack Vogel wrote:
>> J> UH, maybe asking the owner of the driver would help :)
>> J>
>> J> ... and no, I've never been aware of doing anything to stop
>>
>> supporting
>>
>>
> _______________________________________________
> freebsd-net@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-net
> To unsubscribe, send any mail to "freebsd-net-unsubscribe@freebsd.org"




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?515AE933.7020806>