From owner-freebsd-questions Thu Nov 19 02:25:50 1998 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id CAA12305 for freebsd-questions-outgoing; Thu, 19 Nov 1998 02:25:50 -0800 (PST) (envelope-from owner-freebsd-questions@FreeBSD.ORG) Received: from mozart.adv.magwien.gv.at (mozart.adv.magwien.gv.at [141.203.2.173]) by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id CAA12300 for ; Thu, 19 Nov 1998 02:25:47 -0800 (PST) (envelope-from gal@adv.magwien.gv.at) Received: (from root@localhost) by mozart.adv.magwien.gv.at (8.8.8/1.0) id LAA10155; Thu, 19 Nov 1998 11:25:08 +0100 (CET) (envelope-from gal@adv.magwien.gv.at) Received: from pirx.adv.magwien.gv.at(141.203.1.20) by mozart.adv.magwien.gv.at via smap (V2.0) id xma008515; Thu, 19 Nov 98 11:18:43 +0100 Message-ID: <3653F09A.41C67EA6@adv.magwien.gv.at> Date: Thu, 19 Nov 1998 10:19:06 +0000 From: Peter Reif Organization: Municipality of Vienna, Network Development X-Mailer: Mozilla 3.04 (X11; I; FreeBSD 3.0-RELEASE i386) MIME-Version: 1.0 To: freebsd-questions@FreeBSD.ORG Subject: can't compile Kernel Content-Type: multipart/mixed; boundary="------------446B9B3D2781E494167EB0E7" X-filter-Id: 4.13 322112510144 X-filter-From: gal@adv.magwien.gv.at X-filter-To: "Peter Reif" freebsd-questions@FreeBSD.ORG Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG This is a multi-part message in MIME format. --------------446B9B3D2781E494167EB0E7 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit /usr/src/sys/compile/VESUV # make yields: [...] loading kernel identcpu.o: Undefined symbol `_i486_bzero' referenced from text segment *** Error code 1 Compiling the SMP-GENERIC kernel works. When I take identcpu.o form SMP-GENERIC, the new kernel runs, too! uname -a: FreeBSD vesuv 3.0-RELEASE FreeBSD 3.0-RELEASE #0: :/usr/src/sys/compile/SMP-GENERIC i386 -- --------------446B9B3D2781E494167EB0E7 Content-Type: text/plain; charset=us-ascii; name="VESUV" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="VESUV" # # SMP-GENERIC -- Smp machine with WD/AHx/NCR/BTx family disks # # For more information read the handbook part System Administration -> # Configuring the FreeBSD Kernel -> The Configuration File. # The handbook is available in /usr/share/doc/handbook or online as # latest version from the FreeBSD World Wide Web server # # # An exhaustive list of options and more detailed explanations of the # device lines is present in the ./LINT configuration file. If you are # in doubt as to the purpose or necessity of a line, check first in LINT. # # $Id: SMP-GENERIC,v 1.17 1998/10/16 04:44:05 peter Exp $ machine "i386" # SMP does NOT support 386/486 CPUs. #cpu "I386_CPU" #cpu "I486_CPU" cpu "I586_CPU" # cpu "I686_CPU" ident VESUV maxusers 100 # Create a SMP capable kernel (mandatory options): options SMP # Symmetric MultiProcessor Kernel options APIC_IO # Symmetric (APIC) I/O # Optional, these are the defaults: #options NCPU=2 # number of CPUs #options NBUS=4 # number of busses #options NAPIC=1 # number of IO APICs #options NINTR=24 # number of INTs # Lets always enable the kernel debugger for SMP. options DDB # SMP shouldn't need x87 emulation, disable by default. #options MATH_EMULATE #Support for x87 emulation options INET #InterNETworking options FFS #Berkeley Fast Filesystem options FFS_ROOT #FFS usable as root device [keep this!] options MFS #Memory Filesystem options MFS_ROOT #MFS usable as root device, "MFS" req'ed options NFS #Network Filesystem options NFS_ROOT #NFS usable as root device, "NFS" req'ed #options MSDOSFS #MSDOS Filesystem options "CD9660" #ISO 9660 Filesystem options "CD9660_ROOT" #CD-ROM usable as root. "CD9660" req'ed options PROCFS #Process filesystem options "COMPAT_43" #Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=15000 #Be pessimistic about Joe SCSI device options UCONSOLE #Allow users to grab the console options FAILSAFE #Be conservative options USERCONFIG #boot -c editor options VISUAL_USERCONFIG #visual boot -c editor config kernel root on wd0 controller isa0 controller eisa0 controller pci0 controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 vector fdintr disk fd0 at fdc0 drive 0 #disk fd1 at fdc0 drive 1 # Unless you know very well what you're doing, leave ft0 at drive 2, or # remove the line entirely if you don't need it. Trying to configure # it on another unit might cause surprises, see PR kern/7176. #tape ft0 at fdc0 drive 2 options "CMD640" # work around CMD640 chip deficiency #controller wdc0 at isa? port "IO_WD1" bio irq 14 vector wdintr #disk wd0 at wdc0 drive 0 #disk wd1 at wdc0 drive 1 #controller wdc1 at isa? port "IO_WD2" bio irq 15 vector wdintr #disk wd2 at wdc1 drive 0 #disk wd3 at wdc1 drive 1 options ATAPI #Enable ATAPI support for IDE bus options ATAPI_STATIC #Don't do it as an LKM #device wcd0 #IDE CD-ROM #device wfd0 #IDE Floppy (e.g. LS-120) # A single entry for any of these controllers (ncr, ahb, ahc, amd) is # sufficient for any number of installed devices. #controller ncr0 #controller amd0 #controller ahb0 controller ahc0 #controller isp0 # This controller offers a number of configuration options, too many to # document here - see the LINT file in this directory and look up the # dpt0 entry there for much fuller documentation on this. controller dpt0 #controller adv0 at isa? port ? cam irq ? #controller adw0 #controller bt0 at isa? port ? cam irq ? #controller aha0 at isa? port ? cam irq ? #controller uha0 at isa? port "IO_UHA0" bio irq ? drq 5 vector uhaintr #controller aic0 at isa? port 0x340 bio irq 11 vector aicintr #controller nca0 at isa? port 0x1f88 bio irq 10 vector ncaintr #controller nca1 at isa? port 0x350 bio irq 5 vector ncaintr #controller sea0 at isa? bio irq 5 iomem 0xc8000 iosiz 0x2000 vector seaintr controller scbus0 device da0 device sa0 device pass0 device cd0 #Only need one of these, the code dynamically grows #device wt0 at isa? port 0x300 bio irq 5 drq 1 vector wtintr #device mcd0 at isa? port 0x300 bio irq 10 vector mcdintr #controller matcd0 at isa? port 0x230 bio #device scd0 at isa? port 0x230 bio # syscons is the default console driver, resembling an SCO console device sc0 at isa? port "IO_KBD" conflicts tty irq 1 vector scintr # Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver #device vt0 at isa? port "IO_KBD" conflicts tty irq 1 vector pcrint #options XSERVER # support for X server #options FAT_CURSOR # start with block cursor # If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines #options PCVT_SCANSET=2 # IBM keyboards are non-std device npx0 at isa? port "IO_NPX" irq 13 vector npxintr # # Laptop support (see LINT for more options) # #device apm0 at isa? disable flags 0x31 # Advanced Power Management # PCCARD (PCMCIA) support #controller card0 #device pcic0 at card? #device pcic1 at card? device sio0 at isa? port "IO_COM1" flags 0x10 tty irq 4 vector siointr device sio1 at isa? port "IO_COM2" tty irq 3 vector siointr #device sio2 at isa? disable port "IO_COM3" tty irq 5 vector siointr #device sio3 at isa? disable port "IO_COM4" tty irq 9 vector siointr device lpt0 at isa? port? tty irq 7 vector lptintr #device psm0 at isa? port "IO_KBD" conflicts tty irq 12 vector psmintr # Order is important here due to intrusive probes, do *not* alphabetize # this list of network interfaces until the probes have been fixed. # Right now it appears that the ie0 must be probed before ep0. See # revision 1.20 of this file. #device de0 #device fxp0 #device tl0 #device tx0 #device vx0 #device xl0 device ed0 at isa? port 0x280 net irq 5 iomem 0xd8000 vector edintr #device ie0 at isa? port 0x300 net irq 10 iomem 0xd0000 vector ieintr #device ep0 at isa? port 0x300 net irq 10 vector epintr #device ex0 at isa? port? net irq? vector exintr #device fe0 at isa? port 0x300 net irq ? vector feintr #device le0 at isa? port 0x300 net irq 5 iomem 0xd0000 vector le_intr #device lnc0 at isa? port 0x280 net irq 10 drq 0 vector lncintr #device ze0 at isa? port 0x300 net irq 10 iomem 0xd8000 vector zeintr #device zp0 at isa? port 0x300 net irq 10 iomem 0xd8000 vector zpintr #device cs0 at isa? port 0x300 net irq ? vector csintr pseudo-device loop pseudo-device ether #pseudo-device sl 1 #pseudo-device ppp 1 #pseudo-device tun 1 pseudo-device pty 64 pseudo-device gzip # Exec gzipped a.out's # KTRACE enables the system-call tracing facility ktrace(2). # This adds 4 KB bloat to your kernel, and slightly increases # the costs of each syscall. options KTRACE #kernel tracing # This provides support for System V shared memory. # options SYSVSHM # The `bpfilter' pseudo-device enables the Berkeley Packet Filter. Be # aware of the legal and administrative consequences of enabling this # option. The number of devices determines the maximum number of # simultaneous BPF clients programs runnable. pseudo-device bpfilter 4 #Berkeley packet filter --------------446B9B3D2781E494167EB0E7-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message