Date: Sun, 4 Feb 2001 08:40:02 -0800 (PST) From: Dag-Erling Smorgrav <des@ofug.org> To: freebsd-bugs@FreeBSD.org Subject: Re: kern/24740: CONNER CFP1080 Tagged Queueing Filesystem Corruption Message-ID: <200102041640.f14Ge2N36019@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
The following reply was made to PR kern/24740; it has been noted by GNATS.
From: Dag-Erling Smorgrav <des@ofug.org>
To: "Kenneth D. Merry" <ken@kdm.org>
Cc: freebsd-gnats-submit@FreeBSD.ORG
Subject: Re: kern/24740: CONNER CFP1080 Tagged Queueing Filesystem Corruption
Date: 04 Feb 2001 17:34:19 +0100
"Kenneth D. Merry" <ken@kdm.org> writes:
> That's good to know. What firmware revision is it? (dmesg output would
> do the trick) And what controller is it on?
Sorry for the delay. Here's a dmesg:
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.2-BETA #4: Mon Nov 6 03:28:44 GMT 2000
des@md5.thinksec.com:/usr/src/sys/compile/MD5
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium/P54C (166.19-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x52c Stepping = 12
Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
real memory = 134217728 (131072K bytes)
avail memory = 127721472 (124728K bytes)
Preloaded elf kernel "kernel" at 0xc02f9000.
Intel Pentium detected, installing workaround for F00F bug
md0: Malloc disk
apm0: <APM BIOS> on motherboard
apm: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
isab0: <Intel 82371SB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX3 ATA controller> port 0xe800-0xe80f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
pci0: <Tseng Labs ET6000/ET6100 graphics accelerator> at 9.0 irq 9
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xd800-0xd81f mem 0xf8800000-0xf88fffff,0xfa800000-0xfa800fff irq 9 at device 10.0 on pci0
fxp0: Ethernet address 00:a0:c9:4d:1b:d4
pcm0: <AudioPCI ES1371> port 0xd400-0xd43f irq 12 at device 11.0 on pci0
ahc0: <Adaptec 2940 Ultra SCSI adapter> port 0xd000-0xd0ff mem 0xf8000000-0xf8000fff irq 11 at device 12.0 on pci0
aic7880: Wide Channel A, SCSI Id=7, 16/255 SCBs
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A, console
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/15 bytes threshold
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ad0: 6149MB <QUANTUM FIREBALL ST6.4A> [13328/15/63] at ata0-master WDMA2
Waiting 2 seconds for SCSI devices to settle
sa0 at ahc0 bus 0 target 3 lun 0
sa0: <TECMAR TRAVAN NS8 P611> Removable Sequential Access SCSI-2 device
sa0: 10.000MB/s transfers (10.000MHz, offset 8)
da0 at ahc0 bus 0 target 2 lun 0
da0: <QUANTUM XP34550W LXY1> Fixed Direct Access SCSI-2 device
da0: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled
da0: 4341MB (8890760 512 byte sectors: 255H 63S/T 553C)
da1 at ahc0 bus 0 target 4 lun 0
da1: <CONNER CFP1080S 4649> Fixed Direct Access SCSI-2 device
da1: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled
da1: 1030MB (2110812 512 byte sectors: 255H 63S/T 131C)
Mounting root from ufs:/dev/wd0a
cd0 at ahc0 bus 0 target 5 lun 0
cd0: <TOSHIBA CD-ROM XM-3801TA 1047> Removable CD-ROM SCSI-2 device
cd0: 10.000MB/s transfers (10.000MHz, offset 8)
cd0: Attempt to query device size failed: NOT READY, Medium not present
DES
--
Dag-Erling Smorgrav - des@ofug.org
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-bugs" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200102041640.f14Ge2N36019>