Date: Sun, 7 Apr 2002 13:06:23 -0700 (PDT) From: William Gnadt <wgnadt@yahoo.com> To: freebsd-questions@freebsd.org Cc: wgnadt@rri-usa.org Subject: help with USB hard drive Message-ID: <20020407200623.76631.qmail@web9205.mail.yahoo.com>
next in thread | raw e-mail | index | archive | help
Hi:
I've recently acquired a USB (1.1) hard disk enclosure. I can use
it successfully under Windows AFTER installing the supllied drivers.
However, it's unclear how (or if) I can mount this drive under FreeBSD.
Below is the output from my /var/run/dmesg.boot. The ATAPI-4 bridge
is listed as device 'ugen0'. Is it possible to talk to the bridge?
If so, how can I mount the HD?
Thanks for any help or pointers. (My web searches turned up very little
on the subject.)
--Bill
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993,
1994
The Regents of the University of California. All rights
reserved.
FreeBSD 4.5-STABLE #0: Thu Feb 21 10:04:48 EST 2002
wgnadt@merlin.local.net:/usr/src/sys/compile/MYKERNEL
Timecounter "i8254" frequency 1193182 Hz
CPU: AMD-K6(tm) 3D processor (400.91-MHz 586-class CPU)
Origin = "AuthenticAMD" Id = 0x58c Stepping = 12
Features=0x8021bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,PGE,MMX>
AMD Features=0x80000800<SYSCALL,3DNow!>
real memory = 268369920 (262080K bytes)
avail memory = 256061440 (250060K bytes)
Preloaded elf kernel "kernel" at 0xc04f5000.
K6-family MTRR support enabled (2 registers)
md0: Malloc disk
Using $PIR table, 6 entries at 0xc00fdd10
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <VIA 82C598MVP (Apollo MVP3) PCI-PCI (AGP) bridge> at device 1.0
on pci0
pci1: <PCI bus> on pcib1
pci1: <Cirrus Logic GD5465 SVGA controller> at 0.0 irq 11
isab0: <VIA 82C586 PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C586 ATA33 controller> port 0xb400-0xb40f at device 7.1
on pci0
ata0: at 0x1f0 irq 14 on atapci0
uhci0: <VIA 83C572 USB controller> port 0xb000-0xb01f irq 11 at device
7.2 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ugen0: Prolific Technology Inc. ATAPI-4 Bridge Controller, rev
1.00/1.00, addr 2pcib2: <PCI to PCI bridge (vendor=1106 device=3040)>
at device 7.3 on pci0
atapci1: <Promise ATA66 controller> port
0xc800-0xc83f,0xc400-0xc403,0xc000-0xc007,0xbc00-0xbc03,0xb800-0xb807
mem 0xe9000000-0xe901ffff irq 11 at device 9.0 on pci0
ata2: at 0xb800 on atapci1
ata3: at 0xc000 on atapci1
pcm0: <AudioPCI ES1370> port 0xcc00-0xcc3f irq 11 at device 10.0 on
pci0
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc97ff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
IP packet filtering initialized, divert disabled, rule-based forwarding
disabled, default to deny, logging limited to 100 packets/entry by
default
ad4: 19470MB <QUANTUM FIREBALLlct10 20> [39560/16/63] at ata2-master
UDMA66
ad6: 6208MB <ST36530A> [13456/15/63] at ata3-master UDMA33
acd0: CDROM <CD-ROM 48X/AKU> at ata0-master using PIO4
Mounting root from ufs:/dev/ad4s2a
__________________________________________________
Do You Yahoo!?
Yahoo! Tax Center - online filing with TurboTax
http://taxes.yahoo.com/
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20020407200623.76631.qmail>