Skip site navigation (1)Skip section navigation (2)
Date:      Sat, 26 Dec 1998 11:04:35 -0800 (PST)
From:      Eddie Lawhead <eddie@silk.net>
To:        Reza Tahir <reza@telekom.com.my>
Cc:        freebsd-questions@FreeBSD.ORG
Subject:   RE: Mouse won't move
Message-ID:  <Pine.BSF.4.05.9812261058240.28275-100000@eddie.silk.net>
In-Reply-To: <D9DD9934B531D211B32C0000F81A7FBF23E4E3@SMSGNT03>

next in thread | previous in thread | raw e-mail | index | archive | help
Hello,


> Yes, I did went to the "mouse" in the /stand/sysinstall. Then changed the "enable mouse daemon" but to no avail.
> What could be wrong. Does this means reinstallation or perhaps i should do to "superprobe"??
> 

Are your serial ports detected at boot time?  If your not sure, try this:

dmesg | more

and see if you see sio0 and/or sio1 . If they are not there you need to
reboot the machine and then type -c at the boot: prompt.  This will allow
you to enable or disablr cetain hardware.

BTW: Remember to CC all messages to the list.  Someone else may have the
same problem.

Eddie Lawhead

> 
> Hello,
> 
> On Thu, 24 Dec 1998, Reza Tahir wrote:
> 
> > Dear All,
> > 
> > I have a couple of problems here:
> > 1) when  I installed FreeBSD 2.2.7 I forgot to plug in the micro$oft serial mouse on COM1
> > 2) Then when I tried to /stand/sysinstall the "XF86Setup" and selected "/dev/sysmouse" it won't work. 
> >    The same goes to "/dev/cua0" when I chose this. What's wrong? Do I have to reinstall the whole thing?
> 
> Did you go into the "Mouse" section of /stand/sysinstall ?  You can
> select your mouse type there and then enable the mouse daemon. 
> 
> HTH
> 
> Eddie  
> 
> =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
> Eddie H. Lawhead                            FreeBSD: The Power To Serve
> Kelowna, BC, Canada                              http://www.FreeBSD.org 
> eddie@silk.net                                      http://www.Silk.net
>          -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- 
>          - Silk Internet:  Your Smooth Connection To The Net -
> =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
> 
> 
> To Unsubscribe: send mail to majordomo@FreeBSD.org
> with "unsubscribe freebsd-questions" in the body of the message
> 
> 
> 

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
Eddie H. Lawhead                            FreeBSD: The Power To Serve
Kelowna, BC, Canada                              http://www.FreeBSD.org 
eddie@silk.net                                      http://www.Silk.net
         -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- 
         - Silk Internet:  Your Smooth Connection To The Net -
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.05.9812261058240.28275-100000>