Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 22 Dec 2010 17:58:56 +0200
From:      Daniel Braniss <danny@cs.huji.ac.il>
To:        John Baldwin <jhb@freebsd.org>
Cc:        freebsd-stable@freebsd.org
Subject:   Re: panic on boot 
Message-ID:  <E1PVR5c-0006AQ-Cb@kabab.cs.huji.ac.il>
In-Reply-To: <201012220951.50493.jhb@freebsd.org> 
References:  <E1PVLfv-0000y6-21@kabab.cs.huji.ac.il>  <201012220951.50493.jhb@freebsd.org>

next in thread | previous in thread | raw e-mail | index | archive | help
> On Wednesday, December 22, 2010 5:12:03 am Daniel Braniss wrote:
> > the hardware is Sun Fire X2200 M2, and it's discless, PXE booted.
> > 
> > this seems to have started sometime before 8.2, and it
> > 'sometimes happens':
> > 
> > FreeBSD 8.2-PRERELEASE #15 r4274: Wed Dec 22 09:11:27 IST 2010c40, rbp = 
> > 0xffffffff80ef5c60 ---
> >     danny@rnd:/home/obj/rnd/r+d/stable/8/sys/HUJI amd64
> > Timecounter "i8254" frequency 1193182 Hz quality 0
> > CPU: Dual-Core AMD Opteron(tm) Processor 2218 (2613.40-MHz K8-class CPU)
> >   Origin = "AuthenticAMD"  Id = 0x40f13  Family = f  Model = 41  Stepping = 3
> >   Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,
> > CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
> >   Features2=0x2001<SSE3,CX16>
> >   AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!>
> >   AMD Features2=0x1f<LAHF,CMP,SVM,ExtAPIC,CR8>
> > ...
> > SMP: AP CPU #3 Launched!
> > (cd0:ata0:0:0:0): SCSI status: Check Condition
> > cpu3 AP:
> > (cd0:ata0:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present)
> >      ID: 0x03000000   VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
> > (cd0:  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
> > ata0:0:  timer: 0x000200ef therm: 0x00010000 err: 0x000000f00: pmc: 0x000104000): 
> > Error 6, Unretryable error
> > SMP: AP CPU #2 Launched!
> > cd0 at ata0 bus 0 scbus0 target 0 lun 0
> > cpu2 AP:
> > cd0:      ID: 0x02000000   VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
> > <TEAC DV-28E-N P.6A> Removable CD-ROM SCSI-0 device 
> >   lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
> > cd0: 33.300MB/s transfers  timer: 0x000200ef therm: 0x00010000 err: 0x000000f0 ( pmc: 0x00010400UDMA2, 
> > ATAPI 12bytes, ioapic0: routing intpin 3 (PIO 65534bytesISA IRQ 3)) to lapic 1 vector 48
> > f
> > loiwotaapbilce0 :c lreoaunteirn gs tianrttpeidn
> >  4 (cd0: Attempt to query device size failed: NOT READY, Medium not present
> > ISA IRQ 4) to lapic 2 vector 48
> > ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 3 vector 48
> > ioapic0: routing intpin 15 (ISA IRQ 15) to lapic 1 vector 49
> > ioapic0: routing intpin 17 (PCI IRQ 17) to lapic 2 vector 49
> > ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 3 vector 49
> > ioapic0: routing intpin 22 (PCI IRQ 22) to lapic 1 vector 50
> > ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 2 vector 50
> > kernel trap 12 with interrupts disabled
> > 
> > 
> > Fatal trap 12: page fault while in kernel mode
> > cpuid = 0; apic id = 00
> > fault virtual address   = 0x10
> > fault code              = supervisor read data, page not present
> > instruction pointer     = 0x20:0xffffffff808b1581
> > stack pointer           = 0x28:0xffffffff80ef5b20
> > frame pointer           = 0x28:0xffffffff80ef5b50
> > code segment            = base 0x0, limit 0xfffff, type 0x1b
> >                         = DPL 0, pres 1, long 1, def32 0, gran 1
> > processor eflags        = resume, IOPL = 0
> > current process         = 0 (swapper)
> > trap number             = 12
> > panic: page fault
> > cpuid = 0
> > KDB: stack backtrace:
> > db_trace_self_wrapper() at db_trace_self_wrapper+0x2a
> > kdb_backtrace() at kdb_backtrace+0x37
> > panic() at panic+0x187
> > trap_fatal() at trap_fatal+0x290
> > trap_pfault() at trap_pfault+0x28f
> > trap() at trap+0x3df
> > calltrap() at calltrap+0x8
> > --- trap 0xc, rip = 0xffffffff808b1581, rsp = 0xffffffff80ef5b20, rbp = 0xffffffff80ef5b50 ---
> > intr_execute_handlers() at intr_execute_handlers+0x21
> > lapic_handle_intr() at lapic_handle_intr+0x37
> > Xapic_isr1() at Xapic_isr1+0xa5
> > --- interrupt, rip = 0xffffffff808b6cf3, rsp = 0xffffffff80ef5c40, rbp = 0xffffffff80ef5c60 ---
> > spinlock_exit() at spinlock_exit+0x33
> > ioapic_assign_cpu() at ioapic_assign_cpu+0x123
> > intr_shuffle_irqs() at intr_shuffle_irqs+0x9d
> > mi_startup() at mi_startup+0x77
> > btext() at btext+0x2c
> > Uptime: 2s
> 
> Can you do 'l *intr_execute_handlers+0x21' and 'l *ioapic_assign_cpu+0x123'
> in 'gdb kernel.debug' of your kernel?

sure, as soon as it happens, and it aint happening now :-(
but when it will happen, I think it won't let me into the debugger
- probably will have to recompile
thanks
	danny






Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?E1PVR5c-0006AQ-Cb>