Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 9 Jun 2005 15:31:09 -0300 (EST)
From:      <scuba@centroin.com.br>
To:        <freebsd-questions@freebsd.org>
Subject:   Re: mismatch results with disk performance
Message-ID:  <Pine.BSI.4.33.0506091527380.24584-100000@hypselo.centroin.com.br>
In-Reply-To: <Pine.BSI.4.33.0506071836160.11749-100000@hypselo.centroin.com.br>

next in thread | previous in thread | raw e-mail | index | archive | help

Hi,

=09No one else has seem this?
=09I upgraded to 5.4 and the problem was kept.
=09Should it be a problem with ICH5 driver?


On Tue, 7 Jun 2005 scuba@centroin.com.br wrote:

|Hi ALL,
|
|=09I hope it=B4s not a known issue.
|=09I=B4ve installed (express) a FreeBSD 5.3 (I know it=B4s not the last
|stable) on a new machine with the following hardware:
|
|=09Asus P4P800 SE  (BIOS v. 1008)
|=092GB RAM ( 4x 512 DDR400 )
|=092 HDD Samsung SP0802N (80GB 7200rpm ata-100) 80 pins cable.
|
|=09The HD were formated with newfs defaults, and the following
|results were the same using both as master (primary e secondary) or with a
|master / slave (same interface).
|
|=09With diskinfo both performance are the same, but with "dd", the
|second disc (the slave or the secondary master), is always worst as if it
|were working in DMA2.
|
|=09what should be the right results?
|
|=09Here are the results:
|
|=09DD: dd if=3D/dev/zero of=3DTEST count=3D1000 bs=3D64k
|
|=09master:  60 Mb/s
|=09slave:   16 Mb/s
|
|=09The results with diskinfo (almost the same):
|
|/dev/ad0
|=09512         =09# sectorsize
|=0980060424192 =09# mediasize in bytes (75G)
|=09156368016   =09# mediasize in sectors
|=09155127      =09# Cylinders according to firmware.
|=0916          =09# Heads according to firmware.
|=0963          =09# Sectors according to firmware.
|
|Seek times:
|=09Full stroke:=09  250 iter in   5.477568 sec =3D   21.910 msec
|=09Half stroke:=09  250 iter in   4.140590 sec =3D   16.562 msec
|=09Quarter stroke:=09  500 iter in   6.093340 sec =3D   12.187 msec
|=09Short forward:=09  400 iter in   2.088111 sec =3D    5.220 msec
|=09Short backward:=09  400 iter in   2.532713 sec =3D    6.332 msec
|=09Seq outer:=09 2048 iter in   0.261596 sec =3D    0.128 msec
|=09Seq inner:=09 2048 iter in   0.259723 sec =3D    0.127 msec
|Transfer rates:
|=09outside:       102400 kbytes in   1.743910 sec =3D    58719 kbytes/sec
|=09middle:        102400 kbytes in   2.031982 sec =3D    50394 kbytes/sec
|=09inside:        102400 kbytes in   3.354742 sec =3D    30524 kbytes/sec
|
|=3D=3D=3D=3D=3D=3D=3D=3D=3D
|
|/dev/ad1
|=09512         =09# sectorsize
|=0980060424192 =09# mediasize in bytes (75G)
|=09156368016   =09# mediasize in sectors
|=09155127      =09# Cylinders according to firmware.
|=0916          =09# Heads according to firmware.
|=0963          =09# Sectors according to firmware.
|
|Seek times:
|=09Full stroke:=09  250 iter in   5.431290 sec =3D   21.725 msec
|=09Half stroke:=09  250 iter in   4.111275 sec =3D   16.445 msec
|=09Quarter stroke:=09  500 iter in   6.282551 sec =3D   12.565 msec
|=09Short forward:=09  400 iter in   1.741538 sec =3D    4.354 msec
|=09Short backward:=09  400 iter in   3.285028 sec =3D    8.213 msec
|=09Seq outer:=09 2048 iter in   0.259503 sec =3D    0.127 msec
|=09Seq inner:=09 2048 iter in   0.258212 sec =3D    0.126 msec
|Transfer rates:
|=09outside:       102400 kbytes in   1.720602 sec =3D    59514 kbytes/sec
|=09middle:        102400 kbytes in   1.998063 sec =3D    51250 kbytes/sec
|=09inside:        102400 kbytes in   3.235904 sec =3D    31645 kbytes/sec
|
|
|- Marcelo
|




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSI.4.33.0506091527380.24584-100000>