Date: Tue, 13 Jun 2017 17:09:12 +0000 From: bugzilla-noreply@freebsd.org To: freebsd-bugs@FreeBSD.org Subject: [Bug 219960] CAM failure on Seagate ST2000DM006-2DM164 CC26 Message-ID: <bug-219960-8@https.bugs.freebsd.org/bugzilla/>
next in thread | raw e-mail | index | archive | help
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=3D219960 Bug ID: 219960 Summary: CAM failure on Seagate ST2000DM006-2DM164 CC26 Product: Base System Version: 11.0-RELEASE Hardware: amd64 OS: Any Status: New Severity: Affects Only Me Priority: --- Component: kern Assignee: freebsd-bugs@FreeBSD.org Reporter: eli@egwynn.com I bought 2x new ST2000DM006-2DM164 disks. They work fine on my MacBook Pro (Early 2011) running OS X 10.11.6. If I attach them to my FreeBSD machine, = they show up. If I try to create partitions on them, they fail and detach. Detai= ls below. --- uname -a FreeBSD zfs.egwynn.com 11.0-RELEASE-p10 FreeBSD 11.0-RELEASE-p10 #3 r261451= M: Mon Jun 12 14:42:11 EDT 2017=20=20=20=20 root@zfs.egwynn.com:/usr/obj/usr/src/sys/GENERIC amd64 --- dmesg ada5 at siisch0 bus 0 scbus7 target 0 lun 0 ada5: <ST2000DM006-2DM164 CC26> ACS-2 ATA SATA 3.x device ada5: Serial Number Z4Z82YM7 ada5: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada5: Command Queueing enabled ada5: 1907729MB (3907029168 512 byte sectors) ada5: quirks=3D0x1<4K> --- dmesg after `gpart create -s gpt ada5` (ada5:siisch0:0:0:0): WRITE_FPDMA_QUEUED. ACB: 61 01 00 00 00 40 00 00 00 0= 0 00 00 (ada5:siisch0:0:0:0): CAM status: CCB request was invalid (ada5:siisch0:0:0:0): Error 22, Unretryable error ada5 at siisch0 bus 0 scbus7 target 0 lun 0 ada5: <ST2000DM006-2DM164 CC26> s/n Z4Z82YM7 detached (ada5:siisch0:0:0:0): Periph destroyed --- camcontrol identify ada5 pass6: <ST2000DM006-2DM164 CC26> ACS-2 ATA SATA 3.x device pass6: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) protocol ATA/ATAPI-9 SATA 3.x device model ST2000DM006-2DM164 firmware revision CC26 serial number Z4Z82YM7 WWN 5000c500a2e3c45f cylinders 16383 heads 16 sectors/track 63 sector size logical 512, physical 4096, offset 0 LBA supported 268435455 sectors LBA48 supported 3907029168 sectors PIO supported PIO4 DMA supported WDMA2 UDMA6 media RPM 7200 Feature Support Enabled Value Vendor read ahead yes yes write cache yes yes flush cache yes yes overlap no Tagged Command Queuing (TCQ) no no Native Command Queuing (NCQ) yes 32 tags NCQ Queue Management no NCQ Streaming no Receive & Send FPDMA Queued no SMART yes yes microcode download yes yes security yes no power management yes yes advanced power management yes yes 128/0x80 automatic acoustic management no no media status notification no no power-up in Standby yes no write-read-verify yes no 0/0x0 unload no no general purpose logging yes yes free-fall no no Data Set Management (DSM/TRIM) no Host Protected Area (HPA) yes no 3907029168/3907029168 HPA - Security no --- smartctl -a /dev/ada5 smartctl 6.5 2016-05-07 r4318 [FreeBSD 11.0-RELEASE-p10 amd64] (local build= )=20=20=20 =20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20= =20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20= =20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20= =20=20=20=20 [38/18= 69] Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org =3D=3D=3D START OF INFORMATION SECTION =3D=3D=3D Device Model: ST2000DM006-2DM164 Serial Number: Z4Z82YM7 LU WWN Device Id: 5 000c50 0a2e3c45f Firmware Version: CC26 User Capacity: 2,000,398,934,016 bytes [2.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Tue Jun 13 13:04:17 2017 EDT SMART support is: Available - device has SMART capability. SMART support is: Enabled =3D=3D=3D START OF READ SMART DATA SECTION =3D=3D=3D SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disab= led. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has e= ver been run. Total time to complete Offline data collection: ( 89) seconds. Offline data collection capabilities: (0x73) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 213) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x1085) SCT Status supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED=20 WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 100 100 006 Pre-fail Always=20= =20=20=20=20=20 - 33128 3 Spin_Up_Time 0x0003 099 099 000 Pre-fail Always=20= =20=20=20=20=20 - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always=20= =20=20=20=20=20 - 4 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always=20= =20=20=20=20=20 - 0 7 Seek_Error_Rate 0x000f 100 253 030 Pre-fail Always=20= =20=20=20=20=20 - 17 9 Power_On_Hours 0x0032 100 100 000 Old_age Always=20= =20=20=20=20=20 - 1 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always=20= =20=20=20=20=20 - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always=20= =20=20=20=20=20 - 4 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always=20= =20=20=20=20=20 - 0 184 End-to-End_Error 0x0032 100 100 099 Old_age Always=20= =20=20=20=20=20 - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always=20= =20=20=20=20=20 - 0 188 Command_Timeout 0x0032 100 253 000 Old_age Always=20= =20=20=20=20=20 - 1 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always=20= =20=20=20=20=20 - 0 190 Airflow_Temperature_Cel 0x0022 064 064 045 Old_age Always=20= =20=20=20=20=20 - 36 (Min/Max 30/36) 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always=20= =20=20=20=20=20 - 0 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always=20= =20=20=20=20=20 - 3 193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always=20= =20=20=20=20=20 - 7 194 Temperature_Celsius 0x0022 036 040 000 Old_age Always=20= =20=20=20=20=20 - 36 (0 26 0 0 0) 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always=20= =20=20=20=20=20 - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline= =20=20=20=20=20 - 0 199 UDMA_CRC_Error_Count 0x003e 200 253 000 Old_age Always=20= =20=20=20=20=20 - 0 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline= =20=20=20=20=20 - 0 (144 67 0) 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline= =20=20=20=20=20 - 1 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline= =20=20=20=20=20 - 2158 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. --=20 You are receiving this mail because: You are the assignee for the bug.=
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?bug-219960-8>