Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 12 Jan 2001 01:00:19 -0500
From:      Drew Linsalata <dlinsalata@mac.com>
To:        Kelly Hendrix <kelly@compuage.com>
Cc:        <freebsd-questions@freebsd.org>
Subject:   Re: 3.5.1 and Linksys LNE100TX 4.1
Message-ID:  <B68407A3.3A030%dlinsalata@mac.com>
In-Reply-To: <Pine.BSF.4.21.0101120016220.511-100000@root.hendrix.net>

next in thread | previous in thread | raw e-mail | index | archive | help
Hi Kelly,

You are right, according to the GENERIC config file, its the pn driver that
should be used for PNIC cards like the LNE100TX.  So, the next silly
question is how to get the kernel to stop using the wrong (al) driver.  This
is not a working system, just a clean install during which the kernel is
defaulting to the al driver.

Any hints?  

- Drew


> Greetings :)
> 
> If I'm not mistaken, you're using the wrong driver for the LNE100TX.  In
> 3.X you need to add device ln0 to your kernel config to use this and other
> PNIC based cards.  I'm not completely sure about this because I don't have
> a GENERIC or LINT config file lying around from the 3.X branch, so you'll
> need to check for yourself to see if that is the case.
> 
> Kelly
> 
> On Thu, 11 Jan 2001, Drew Linsalata wrote:
> 
>> Date: Thu, 11 Jan 2001 14:25:27 -0500
>> From: Drew Linsalata <dlinsalata@mac.com>
>> To: freebsd-questions@freebsd.org
>> Subject: 3.5.1 and Linksys LNE100TX 4.1
>> 
>> Hi all,
>> 
>> After wrestling quite unsuccessfuly with the new ad driver in 4.x, I decided
>> to go back to a 3.x release to get my two WD 18G IDE drives working
>> correctly.  Now my LNE100TX (version 4.1) is coming up with a bogus MAC
>> address ff:ff:ff:ff at boot time using the al driver.
>> 
>> I've got PnP disabled in the BIOS and see no IO/IRQ conflicts.  Before I
>> replace the NIC (I'd really like to standardize on these), has anyone found
>> a solution for this?
>> 
>> The system is 3.5.1-RELEASE, if it matters at all.
>> 
>> - Drew
>> 
>> 
>> 
>> To Unsubscribe: send mail to majordomo@FreeBSD.org
>> with "unsubscribe freebsd-questions" in the body of the message
>> 
> 



To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?B68407A3.3A030%dlinsalata>