Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 29 Oct 2004 03:58:35 +0200
From:      "Julian H. Stacey" <jhs@flat.berklix.net>
To:        "M. Warner Losh" <imp@bsdimp.com>
Cc:        freebsd-current@freebsd.org
Subject:   Re: 5.3-RC1 attempt with a Toshiba Libretto 70CT failed, 4.10 OK 
Message-ID:  <200410290158.i9T1wZVR044943@laps.jhs.private>
In-Reply-To: Message from "M. Warner Losh" <imp@bsdimp.com>  <20041027.090053.122146739.imp@bsdimp.com> 

next in thread | previous in thread | raw e-mail | index | archive | help
"M. Warner Losh" wrote:
> In message: <200410270046.i9R0kV0K012290@laps.jhs.private>
>             "Julian Stacey" <jhs@berklix.org> writes:
> : It gets further than 5.2.1-RELEASE, as 5.2.1 hangs quickly after first flop
> py
> : after trying to fetch modules off floppy with "No floppy devices found".
> 
> That's because there's no working support in current/5.x for the
> YE-Data pcmcia cards.  It still works in 4.x, but not 5.x, alas.  I've
> done some work to make it happy, but it still isn't happy with that
> work.  The first problem is the fast interrupt, but even with that
> fixed there's been enough changes in the floppy driver to make it no
> longer work.

Ah ! Thanks !
BTW on 4.10 The ftp through ep0 ethernet chugs along at 1 K byte / sec !
& expires half way through load of /bin
& Ive used that pcmcia ether card with FBSD before, its OK,
so it's the libretto.
I notice the install offers memory ranges before changing cards
	0xd0000 - 0xd3fff
	0xd4000 - 0xd7fff
	0xd8000 - 0xdbfff
	0xdc000 - 0xdffff
but I can't F4 to see what else is in use. I also tried deselecting a few IRQs,
a few too many, it paniced. If any furthe tips available I'm keen.
Funny this BTW, was easy on FBSD-2 or 3 a few years back
Perhaps I'll do a 2.2.8 or 3.4 install & then do a net upgrade 

> : 5.3-RC1 gets much further than 5.2.1 on this libretto: it loads
> : Boot, Kern1, Kern2, then Boot, goes through Fdsisk & disklabel, then
> : 	(as there's only 1 pcmcia slot, & I cant even with a device
> : 	rescan get it to see an ethernet pcmcia or pcmcia cdrom
> : 	card) ...  I try to do ftp install, using PLIP or SLIP ...
> : 	& find it doesnt see either of the 2 serials (I guess one
> : 	is mouse) or the parallel port, as well as not recognising
> : 	the fresh plugged in & rescanned 3C589C pcmcia ethernet
> : 	(that works well on other FreeBSD boxes)
> 
> That's because the L-50 and L-70 machines have only ISA PCMICA
> bridges, and that's not yet completely working.  I'll try to fix this
> as I have at least one older laptop that I'd like to see working that
> needs this.
> 
> Warner
> 
> 

-
Julian Stacey.  Unix,C,Net & Sys. Eng. Consultant, Munich.  http://berklix.com
Mail in Ascii, Html dumped as Spam.  Ihr Rauch = mein allergischer Kopfschmerz.



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200410290158.i9T1wZVR044943>