Date: Thu, 7 Feb 2008 09:54:39 -0800 From: "David Christensen" <davidch@broadcom.com> To: "Carole Macheret" <Carole.Macheret@ch.meggitt.com>, freebsd-net@freebsd.org Subject: RE: BCM5704 chip "initialization failed" Message-ID: <09BFF2FA5EAB4A45B6655E151BBDD903072CEA18@NT-IRVA-0750.brcm.ad.broadcom.com> In-Reply-To: <47AB3A50.1F16.0013.0@ch.meggitt.com> References: <47AB37DD.1F16.0013.0@ch.meggitt.com> <47AB3A50.1F16.0013.0@ch.meggitt.com>
next in thread | previous in thread | raw e-mail | index | archive | help
> The motherboard of my HP proliant DL360 G4p was changed and now I > cannot see my network cards (BCM5704 netXtreme dual gigabit). I'm > running FreeBSD 6.2 p5... >=20 > Here is what I have in dmsg >=20 > bge0: <Broadcom BCM5704 B0, ASIC rev. 0x2100> mem=20 > 0xfdef0000-0xfdefffff > irq 25 at device 2.0 on pci2 > bge0: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xfdef0000 > bge0: firmware handshake timed out > bge0: RX CPU self-diagnostics failed! > bge0: chip initialization failed The NVRAM attached to the 5704 is likely bad, blank, or not programmed correctly. Check with HP support if they have any tools for testing/programming the 5704 (usually called b57udiag or q57udiag) otherwise you probably need to get the board replaced again.=20 Dave
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?09BFF2FA5EAB4A45B6655E151BBDD903072CEA18>