Date: Sun, 8 Apr 2001 22:28:39 -0400 From: "Jesse Gross" <jesse_gross@yahoo.com> To: <freebsd-questions@freebsd.org> Subject: RE: 3com 3cSOHO100-TX problems Message-ID: <OHEMKELJIJBFDIKJNNMHCEDPCAAA.jesse_gross@yahoo.com>
next in thread | raw e-mail | index | archive | help
Hello
I fixed the IRQs by changing the kernel settings and recompiling the kernel.
It appears to have made no difference. I noticed that when the computer
boots, the kernel reports the correct settings for the NIC, and it also
reports an unknown card on the same IRQ. This is my IEEE 1394 card. Might
this be causing conflicts even though its not enabled? Here's the output of
dmesg:
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.2-RELEASE #5: Sun Apr 8 19:53:47 EDT 2001
root@:/usr/src/sys/compile/MYHARDWARE
Timecounter "i8254" frequency 1193182 Hz
CPU: AMD-K7(tm) Processor (499.04-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x612 Stepping = 2
Features=0x81f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,P
AT,MMX>
AMD Features=0xc0400000<AMIE,DSP,3DNow!>
real memory = 134152192 (131008K bytes)
avail memory = 127410176 (124424K bytes)
Preloaded elf kernel "kernel" at 0xc031e000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc031e09c.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <AMD-751 host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <AMD-751 PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <3Dfx Voodoo 3 graphics accelerator> at 5.0 irq 10
pcm0: <AudioPCI ES1371> port 0x1080-0x10bf irq 11 at device 3.0 on pci0
xl0: <3Com 3cSOHO100-TX OfficeConnect> port 0x1000-0x107f mem
0xe8014800-0xe801487f irq 5 at device 4.0 on pci0
xl0: Ethernet address: 00:50:da:24:60:be
miibus0: <MII bus> on xl0
xlphy0: <3Com internal media interface> on miibus0
xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <VIA 82C686 PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686 ATA66 controller> port 0x1440-0x144f at device 7.1 on
pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <VIA 83C572 USB controller> port 0x1400-0x141f irq 11 at device 7.2
on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhid0: Microsoft SideWinder Force Feedback 2 Joystick, rev 1.10/a.00, addr
2, iclass 3/0
ugen0: Logitech, Inc. Camera, rev 1.00/1.00, addr 3
uhci1: <VIA 83C572 USB controller> port 0x1420-0x143f irq 11 at device 7.3
on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
isab1: <PCI to ISA bridge (vendor=1106 device=3057)> at device 7.4 on pci0
pci0: <unknown card> (vendor=0x14f1, dev=0x1033) at 9.0 irq 10
pci0: <unknown card> (vendor=0x104c, dev=0x8019) at 12.0 irq 5
atapci1: <Promise ATA100 controller> port
0x10c0-0x10ff,0x1454-0x1457,0x1460-0x1467,0x1468-0x146b,0x1470-0x1477 mem
0xe8020000-0xe803ffff irq 11 at device 15.0 on pci0
ata2: at 0x1470 on atapci1
ata3: at 0x1460 on atapci1
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ad0: 16231MB <WDC WD170AA> [32979/16/63] at ata0-master UDMA66
ad6: 39083MB <Maxtor 34098H4> [79408/16/63] at ata3-master UDMA100
acd0: CDROM <LTN323> at ata1-master using PIO4
acd1: CD-RW <LG CD-RW CED-8042B> at ata1-slave using PIO4
Mounting root from ufs:/dev/ad0s1a
Does anyone have any suggestions?
Thanks
Jesse Gross
-----Original Message:
Date: Thu, 05 Apr 2001 13:44:39 -0000
From: "Kam Salisbury" <netalchemist@hotmail.com>
Subject: RE: 3com 3cSOHO100-TX problems
I had a similiar problem that made me believe my network card was at fault.
It ended up being that during the install I choose to not custom configure
the kernel, thus I had some conflicts betweend drivers that were agravated
by IRQ conflicts. After the IRQ conflicts were sorted out the performance
improved. After learning how to build a custom kernel the performance
litterally sky rocketed.
*If anyone is interested I can post my system configuration and hardware
setup to the list. FreeBSD on a dual processor box is simply astounding.
Kam.
>From: "Jason Halbert" <jason@jason-n3xt.org>
>To: "Jesse Gross" <jesse_gross@yahoo.com>, <freebsd-questions@FreeBSD.ORG>
>Subject: RE: 3com 3cSOHO100-TX problems
>Date: Thu, 5 Apr 2001 00:25:10 -0500
>
>I'm use the 3CSOHO100-TX NIC right now. My webserver, irc server, shells,
>ftp, et al run just fine. I use the xl driver which is compiled into the
>GENERIC kernel. Everything runs great for me. Perhaps you have other
- -thread snipped
_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
_________________________________________________________
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?OHEMKELJIJBFDIKJNNMHCEDPCAAA.jesse_gross>