Date: Wed, 1 Oct 1997 20:29:07 +0200 (GMT) From: csgs@omega.ru.ac.za (Graham Smith) To: current@FreeBSD.ORG Subject: fdesc file system causes instant reboot Message-ID: <m0xGTWF-001ZHPC@cs.ru.ac.za>
next in thread | raw e-mail | index | archive | help
We are running freeBSD current on a dual pentium 200. If we mount fdesc with an /etc/fstab like so: fdesc /dev fdesc rw,union and then do something like: bash$ cat /dev/stdout | somenonexistantfile the machine reboots instantly. this is the top of dmesg: Copyright (c) 1992-1997 FreeBSD Inc. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 3.0-CURRENT #0: Sun Sep 14 23:58:02 SAT 1997 grahams@rucus.ru.ac.za:/usr/src/sys/compile/RUCUS-SMP CPU: Pentium (586-class CPU) Origin = "GenuineIntel" Id = 0x52c Stepping=12 Features=0x3bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,APIC> real memory = 67108864 (65536K bytes) avail memory = 62742528 (61272K bytes) FreeBSD/SMP: Multiprocessor motherboard cpu0 (BSP): apic id: 0, version: 0x00030010, at 0xfee00000 cpu1 (AP): apic id: 1, version: 0x00030010, at 0xfee00000 io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec00000 Probing for devices on PCI bus 0: chip0: <Intel 82439> rev 0x03 on pci0.0.0 chip1: <Intel 82371SB PCI to ISA bridge> rev 0x01 on pci0.7.0 ide_pci0: <Intel PIIX3 Bus-master IDE controller> rev 0x00 on pci0.7.1 ahc0: <Adaptec aic7880 Ultra SCSI host adapter> rev 0x00 int a irq 19 on pci0.12 .0 ahc0: Using left over BIOS settings ahc0: aic7880 Wide Channel, SCSI Id=7, 16 SCBs ahc0: waiting for scsi devices to settle scbus0 at ahc0 bus 0 sd0 at scbus0 target 0 lun 0 sd0: <SEAGATE ST31230N 0300> type 0 fixed SCSI 2 sd0: Direct-Access 1010MB (2069860 512 byte sectors) sd1 at scbus0 target 6 lun 0 sd1: <IBM DORS-32160 S82C> type 0 fixed SCSI 2 sd1: Direct-Access 2063MB (4226725 512 byte sectors) Probing for devices on the ISA bus: sc0 at 0x60-0x6f irq 1 on motherboard sc0: VGA color <16 virtual consoles, flags=0x0> ed0 at 0x300-0x31f irq 3 on isa ed0: address 00:00:e8:1c:7b:57, type NE2000 (16 bit) sio0 at 0x3f8-0x3ff irq 4 on isa sio0: type 16550A lpt0 at 0x378-0x37f irq 7 on isa lpt0: Interrupt-driven port lp0: TCP/IP capable interface lpt1 not found psm0: disabled, not probed. fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa fdc0: NEC 72065B wdc0 at 0x1f0-0x1f7 irq 14 on isa wdc0: unit 0 (wd0): <WDC AC33100H> wd0: 3020MB (6185088 sectors), 6136 cyls, 16 heads, 63 S/T, 512 B/S wdc0: unit 1 (wd1): <ST3290A> wd1: 249MB (510510 sectors), 1001 cyls, 15 heads, 34 S/T, 512 B/S wdc1 not found at 0x170 aha0 not found at 0x330 mcd0 not probed due to I/O address conflict with ed0 at 0x300 matcdc0 not found at 0x230 scd0 not found at 0x230 npx0 on motherboard npx0: INT 16 interface apm0: disabled, not probed. APIC_IO: routing 8254 via 8259 on pin 0 SMP: AP CPU #1 Launched!
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?m0xGTWF-001ZHPC>