From owner-freebsd-amd64@FreeBSD.ORG Sun Nov 14 21:14:48 2004 Return-Path: Delivered-To: freebsd-amd64@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 77E3B16A4CE for ; Sun, 14 Nov 2004 21:14:48 +0000 (GMT) Received: from mail.sbb.co.yu (mail.sbb.co.yu [82.117.194.7]) by mx1.FreeBSD.org (Postfix) with ESMTP id 8B72943D1D for ; Sun, 14 Nov 2004 21:14:47 +0000 (GMT) (envelope-from ggajic@mail.sbb.co.yu) Received: from mail.sbb.co.yu (mail.sbb.co.yu [82.117.194.7]) by mail.sbb.co.yu (8.12.10/8.12.10) with ESMTP id iAELEiIT057210 for ; Sun, 14 Nov 2004 22:14:44 +0100 (CET) Date: Sun, 14 Nov 2004 22:14:44 +0100 (CET) From: Goran Gajic To: freebsd-amd64@FreeBSD.org In-Reply-To: <20041114202359.GC11549@dragon.nuxi.com> Message-ID: References: <20041114202359.GC11549@dragon.nuxi.com> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII; format=flowed X-Sbb.co.yu-MailScanner-Information: Please contact the ISP for more information X-Sbb.co.yu-MailScanner: Found to be clean Subject: Re: sk driver works fine 5.3rc2 - amd64 X-BeenThere: freebsd-amd64@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: Porting FreeBSD to the AMD64 platform List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 14 Nov 2004 21:14:48 -0000 Hi, It has integrated bge. As I have requested two NICs it was shipped with sk as second NIC (I've looked at www.freebsd.org and card was mentioned to be supported :) During tests with 5.3RC1 and 5.3RC2 I have installed third NIC xl0, just to see if it can operate in case sk0 was unusable. Anyway, here is dmesg: Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.3-RELEASE #11: Sat Nov 13 20:41:48 UTC 2004 root@test.sbb.co.yu:/usr/src/sys/amd64/compile/MY Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: AMD Opteron(tm) Processor 248 (2191.72-MHz K8-class CPU) Origin = "AuthenticAMD" Id = 0xf5a Stepping = 10 Features=0x78bfbff AMD Features=0xe0500800 real memory = 3489071104 (3327 MB) avail memory = 3364220928 (3208 MB) ACPI APIC Table: FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 MADT: Forcing active-low polarity and level trigger for SCI ioapic0 irqs 0-23 on motherboard ioapic1 irqs 24-27 on motherboard ioapic2 irqs 28-31 on motherboard acpi0: on motherboard acpi0: Power Button (fixed) acpi0: Sleep Button (fixed) unknown: I/O range not supported unknown: I/O range not supported unknown: I/O range not supported unknown: I/O range not supported Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0 cpu0: on acpi0 cpu1: on acpi0 acpi_button0: on acpi0 pcib0: port 0xcf8-0xcff on acpi0 pci0: on pcib0 pcib1: at device 6.0 on pci0 pci1: on pcib1 ohci0: mem 0xd8104000-0xd8104fff irq 19 at device 0.0 on pci1 ohci0: [GIANT-LOCKED] usb0: OHCI version 1.0, legacy support usb0: SMM does not respond, resetting usb0: on ohci0 usb0: USB revision 1.0 uhub0: AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 3 ports with 3 removable, self powered ohci1: mem 0xd8105000-0xd8105fff irq 19 at device 0.1 on pci1 ohci1: [GIANT-LOCKED] usb1: OHCI version 1.0, legacy support usb1: SMM does not respond, resetting usb1: on ohci1 usb1: USB revision 1.0 uhub1: AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 3 ports with 3 removable, self powered xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0x2000-0x207f mem 0xd8106800-0xd810687f irq 16 at device 10.0 on pci1 miibus0: on xl0 xlphy0: <3Com internal media interface> on miibus0 xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto xl0: Ethernet address: 00:50:04:23:c0:41 fwohci0: mem 0xd8100000-0xd8103fff,0xd8106000-0xd81067ff irq 19 at device 12.0 on pci1 fwohci0: OHCI version 1.10 (ROM=1) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:e0:81:00:00:20:7d:5e fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: on fwohci0 fwe0: on firewire0 if_fwe0: Fake Ethernet address: 02:e0:81:20:7d:5e fwe0: Ethernet address: 02:e0:81:20:7d:5e fwe0: if_start running deferred for Giant sbp0: on firewire0 fwohci0: Initiate bus reset fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) isab0: at device 7.0 on pci0 isa0: on isab0 atapci0: port 0x1440-0x144f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 7.1 on pci0 ata0: channel #0 on atapci0 ata1: channel #1 on atapci0 pci0: at device 7.3 (no driver attached) pci0: at device 7.5 (no driver attached) pcib2: at device 10.0 on pci0 pci2: on pcib2 aac0: mem 0xdc000000-0xdfffffff irq 27 at device 8.0 on pci2 aac0: [FAST] aac0: Enabling 64-bit address support aac0: Unknown processor 100MHz, 48MB cache memory, optional battery not installed aac0: Kernel 4.1-0, Build 6251, S/N bcd1a6 aac0: Supported Options=11d7e aacp0: on aac0 bge0: mem 0xd8200000-0xd820ffff irq 24 at device 9.0 on pci2 miibus1: on bge0 brgphy0: on miibus1 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto bge0: Ethernet address: 00:e0:81:61:d3:66 pci0: at device 10.1 (no driver attached) pcib3: at device 11.0 on pci0 pci3: on pcib3 skc0: port 0x3000-0x30ff mem 0xd8300000-0xd8303fff irq 29 at device 6.0 on pci3 skc0: SK-9521 V2.0 10/100/1000Base-T Adapter skc0: PN: SK-9521 V2.0 skc0: EC: Rev. 1.2 skc0: MN: SysKonnect skc0: SN: CAF12L49CD96B sk0: on skc0 sk0: Ethernet address: 00:00:5a:9c:d9:6b miibus2: on sk0 e1000phy0: on miibus2 e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto pci0: at device 11.1 (no driver attached) pcib4: port 0xcf8-0xcff on acpi0 pcib4: couldn't read bus number from cfg space pcib4: trying bus number 4 pcib4: could not get PCI interrupt routing table for \\_SB_.PCIB - AE_NOT_FOUND pci4: on pcib4 atkbdc0: port 0x64,0x60 irq 1 on acpi0 atkbd0: flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A, console sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A fdc0: port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0 fdc0: [FAST] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 ppc0: port 0x778-0x77f,0x378-0x37f irq 7 drq 3 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/9 bytes threshold ppbus0: on ppc0 plip0: on ppbus0 lpt0: on ppbus0 lpt0: Interrupt-driven port ppi0: on ppbus0 orm0: at iomem 0xd4000-0xd57ff,0xcf800-0xd3fff,0xc0000-0xcf7ff on isa0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x100> vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounters tick every 0.976 msec acd0: CDRW at ata1-master UDMA33 aacd0: on aac0 aacd0: 138800MB (284262400 sectors) (probe11:aacp0:0:4:0): INQUIRY. CDB: 12 0 0 0 24 0 (probe11:aacp0:0:4:0): ILLEGAL REQUEST asc:55,3 (probe11:aacp0:0:4:0): Reserved ASC/ASCQ pair (probe14:aacp0:0:8:0): INQUIRY. CDB: 12 0 0 0 24 0 (probe14:aacp0:0:8:0): ILLEGAL REQUEST asc:55,3 (probe14:aacp0:0:8:0): Reserved ASC/ASCQ pair (probe18:aacp0:0:12:0): INQUIRY. CDB: 12 0 0 0 24 0 (probe18:aacp0:0:12:0): ILLEGAL REQUEST asc:55,3 (probe18:aacp0:0:12:0): Reserved ASC/ASCQ pair (probe21:aacp0:0:15:0): INQUIRY. CDB: 12 0 0 0 24 0 (probe21:aacp0:0:15:0): ILLEGAL REQUEST asc:55,3 (probe21:aacp0:0:15:0): Reserved ASC/ASCQ pair (probe7:aacp0:0:0:0): INQUIRY. CDB: 12 0 0 0 24 0 (probe7:aacp0:0:0:0): ILLEGAL REQUEST asc:55,3 (probe7:aacp0:0:0:0): Reserved ASC/ASCQ pair (probe9:aacp0:0:2:0): INQUIRY. CDB: 12 0 0 0 24 0 (probe9:aacp0:0:2:0): ILLEGAL REQUEST asc:55,3 (probe9:aacp0:0:2:0): Reserved ASC/ASCQ pair (probe10:aacp0:0:3:0): INQUIRY. CDB: 12 0 0 0 24 0 (probe10:aacp0:0:3:0): ILLEGAL REQUEST asc:55,3 (probe10:aacp0:0:3:0): Reserved ASC/ASCQ pair (probe12:aacp0:0:5:0): INQUIRY. CDB: 12 0 0 0 24 0 (probe12:aacp0:0:5:0): ILLEGAL REQUEST asc:55,3 (probe12:aacp0:0:5:0): Reserved ASC/ASCQ pair (probe13:aacp0:0:6:0): INQUIRY. CDB: 12 0 0 0 24 0 (probe13:aacp0:0:6:0): ILLEGAL REQUEST asc:55,3 (probe13:aacp0:0:6:0): Reserved ASC/ASCQ pair (probe15:aacp0:0:9:0): INQUIRY. CDB: 12 0 0 0 24 0 (probe15:aacp0:0:9:0): ILLEGAL REQUEST asc:55,3 (probe15:aacp0:0:9:0): Reserved ASC/ASCQ pair (probe16:aacp0:0:10:0): INQUIRY. CDB: 12 0 0 0 24 0 (probe16:aacp0:0:10:0): ILLEGAL REQUEST asc:55,3 (probe16:aacp0:0:10:0): Reserved ASC/ASCQ pair (probe17:aacp0:0:11:0): INQUIRY. CDB: 12 0 0 0 24 0 (probe17:aacp0:0:11:0): ILLEGAL REQUEST asc:55,3 (probe17:aacp0:0:11:0): Reserved ASC/ASCQ pair (probe19:aacp0:0:13:0): INQUIRY. CDB: 12 0 0 0 24 0 (probe19:aacp0:0:13:0): ILLEGAL REQUEST asc:55,3 (probe19:aacp0:0:13:0): Reserved ASC/ASCQ pair (probe20:aacp0:0:14:0): INQUIRY. CDB: 12 0 0 0 24 0 (probe20:aacp0:0:14:0): ILLEGAL REQUEST asc:55,3 (probe20:aacp0:0:14:0): Reserved ASC/ASCQ pair (probe8:aacp0:0:1:0): INQUIRY. CDB: 12 0 0 0 24 0 (probe8:aacp0:0:1:0): ILLEGAL REQUEST asc:55,3 (probe8:aacp0:0:1:0): Reserved ASC/ASCQ pair SMP: AP CPU #1 Launched! Mounting root from ufs:/dev/aacd0s1a Regards, gg. p.s. I would like once again to thank Peter Edwards and Bjoern A. Zeeb for all work done to make sk driver functional and stable. On Sun, 14 Nov 2004, David O'Brien wrote: > On Tue, Nov 02, 2004 at 10:25:03AM +0100, Goran Gajic wrote: >> I have reported problems with sk driver in FreeBSD 5.3RC1 on amd64 on >> Fujitsu Siemens Celsisu (dual amd64 box with 4 GB memory). > > Can you post your dmesg? The Fujitsu Siemens Celsisus is a Tyan K8W > Thunder (s2885) based machine. Which means it has bge 5703, not sk > on-board. > > -- > -- David (obrien@FreeBSD.org) >