From owner-freebsd-questions Wed Dec 27 19:45:05 1995 Return-Path: owner-questions Received: (from root@localhost) by freefall.freebsd.org (8.7.3/8.7.3) id TAA09703 for questions-outgoing; Wed, 27 Dec 1995 19:45:05 -0800 (PST) Received: from genesis.atrad.adelaide.edu.au (genesis.atrad.adelaide.edu.au [129.127.96.120]) by freefall.freebsd.org (8.7.3/8.7.3) with ESMTP id TAA09691 for ; Wed, 27 Dec 1995 19:44:59 -0800 (PST) Received: from msmith@localhost by genesis.atrad.adelaide.edu.au (8.6.12/8.6.9) id OAA00863; Thu, 28 Dec 1995 14:22:08 +1030 From: Michael Smith Message-Id: <199512280352.OAA00863@genesis.atrad.adelaide.edu.au> Subject: Re: Probe v2.1 not recognizing PCI Bus To: richards@mail.ctenet.com (John Richards) Date: Thu, 28 Dec 1995 14:22:07 +1030 (CST) Cc: questions@FreeBSD.org In-Reply-To: <199512231859.MAA07637@gomer.wiscnet.net> from "John Richards" at Dec 23, 95 12:59:59 pm MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-questions@FreeBSD.org Precedence: bulk John Richards stands accused of saying: > I have created a boot floppy, and at boot, I use the -c switch to customize. > I have a Pentium 120 PCI/ISA Award BIOS v4.50G, 16MB RAM, Adaptec 2940 scsi > controler, with 3c509B nic. When I get to the config prompt, and use the ls > command, I do not have the pci device ahc0 listed. I believe I have tried That's normal; PCI devices aren't listed because they have no parameters that can be modified. If you go to the 'visual' editor, the PCI devices are listed, and you can 'disable' them, but this is just cosmetic. > all documented possibilities. The bottom line is that the kernel probe does > not probe the PCI bus properly to find the Adaptec controller so I have no > recognized hard drives. In fact, the only time I see the probe even check > for the PCI bus is when I use the -v option at boot. With -v, it checks, > but doesn't succeed. This sounds like you are using a Compaq machine, or something else with a broken PCI bus. If you haven't had any responses from the PCI experts by now, a brief post to hackers@freebsd.org stating your machine details (ie. if it's a Compaq, or if not, what chipset/bios it's using, and the details from the -v boot probe) should elicit a useful reponse. > John Richards Good luck! -- ]] Mike Smith, Software Engineer msmith@atrad.adelaide.edu.au [[ ]] Genesis Software genesis@atrad.adelaide.edu.au [[ ]] High-speed data acquisition and (GSM mobile) 0411-222-496 [[ ]] realtime instrument control (ph/fax) +61-8-267-3039 [[ ]] "Who does BSD?" "We do Chucky, we do." [[