Skip site navigation (1)Skip section navigation (2)
Date:      Sat, 30 Oct 2004 14:42:58 -0700
From:      Russell Jackson <rjackson@cserv62.csub.edu>
To:        freebsd-current@freebsd.org
Subject:   host_mem_start value negative?
Message-ID:  <20041030214258.GB60781@cserv63.csub.edu>

next in thread | raw e-mail | index | archive | help

--GvXjxJ+pjyke8COw
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline

sysctl hw.pci.host_mem_start
hw.pci.host_mem_start: -2147483648

Is this even a legal value? It seems non-sensical to me. I'm running
ACPI and hw.acpi.host_mem_start is missing.

-- 
Russell A. Jackson
"Why are we importing all these highbrow plays like `Amadeus'?  I could
have told you Mozart was a jerk for nothing."
		-- Ian Shoales

--GvXjxJ+pjyke8COw
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename="dmesg.boot"

Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.3-STABLE #7: Sat Oct 30 13:15:56 PDT 2004
    raj@localhost:/usr/src/sys/i386/compile/VALA
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0805000.
Preloaded elf module "/boot/kernel/ntfs.ko" at 0xc0805228.
Preloaded elf module "/boot/kernel/acpi_video.ko" at 0xc08052d4.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0805384.
Preloaded elf module "/boot/modules/powernow_k7.ko" at 0xc0805430.
Calibrating clock(s) ... i8254 clock: 1193160 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 1192626488 Hz
CPU: Mobile AMD Athlon(tm) XP 1400+ (1192.63-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x680  Stepping = 0
  Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
  AMD Features=0xc0480000<MP,AMIE,DSP,3DNow!>
Data TLB: 32 entries, fully associative
Instruction TLB: 16 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L2 internal cache: 256 kbytes, 64 bytes/line, 1 lines/tag, 8-way associative
real memory  = 251658240 (240 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009dfff, 643072 bytes (157 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c26000 - 0x000000000ea8ffff, 233218048 bytes (56938 pages)
0x000000000ef00000 - 0x000000000eff7fff, 1015808 bytes (248 pages)
avail memory = 236535808 (225 MB)
bios32: Found BIOS32 Service Directory header at 0xc00f6ff0
bios32: Entry = 0xfd760 (c00fd760)  Rev = 0  Len = 1
pcibios: PCI BIOS entry at 0xfd760+0x11e
pnpbios: Found PnP BIOS data at 0xc00f7050
pnpbios: Entry = f0000:9c77  Rev = 1.0
Other BIOS signatures found:
Powernow: frequency scaling yes -- voltage scaling yes
  0  1197000kHz  FID 0c ( 9.0)  VID 0b (1450mV)
  1   931000kHz  FID 08 ( 7.0)  VID 0e (1300mV)
  2   798000kHz  FID 06 ( 6.0)  VID 13 (1200mV)
  3   665000kHz  FID 04 ( 5.0)  VID 13 (1200mV)
  4   532000kHz  FID 12 ( 4.0)  VID 13 (1200mV)
AMD Powernow K7 <1197000kHz 1450mV>
mem: <memory>
Pentium Pro MTRR support enabled
io: <I/O>
VESA: information block
56 45 53 41 00 02 00 01 00 01 01 00 00 00 22 00 
00 01 ff 00 00 01 0a 01 00 01 20 01 00 01 25 01 
00 01 82 01 0d 01 0e 01 0f 01 20 01 92 01 93 01 
94 01 95 01 96 01 a2 01 a3 01 a4 01 a5 01 a6 01 
VESA: 55 mode(s) found
VESA: v2.0, 16320k memory, flags:0x1, mode table:0xc0704182 (1000022)
VESA: ATI CABO 
VESA: ATI Technologies Inc. U1   01.00
null: <null device, zero device>
netsmb_dev: loaded
random: <entropy source, Software, Yarrow>
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <PTLTD   RSDT> on motherboard
acpi0: [MPSAFE]
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80012814
pci_open(1a):	mode1res=0x80000000 (0x80000000)
pci_cfgcheck:	device 0 [class=060000] [hdr=00] is there (id=cab01002)
pcibios: BIOS version 2.10
Found $PIR table, 11 entries at 0xc00fdf10
PCI-Only Interrupts: none
Location  Bus Device Pin  Link  IRQs
embedded    0    2    A   0x59  11
embedded    0   15    A   0x4a  11
embedded    0    8    A   0x4b  5
embedded    0   10    A   0x48  10 11
embedded    0   11    A   0x49  10 11
embedded    0   19    A   0x49  10 11
embedded    0   12    A   0x49  10 11
embedded    0   12    B   0x49  10 11
slot 13     1    5    A   0x49  10 11
AcpiOsDerivePciId: bus 0 dev 7 func 0
AcpiOsDerivePciId: bus 0 dev 7 func 0
AcpiOsDerivePciId: bus 0 dev 10 func 0
acpi0: Power Button (fixed)
acpi0: Sleep Button (fixed)
atpic: Programming IRQ9 as level/low
AcpiOsDerivePciId: bus 0 dev 0 func 0
acpi_ec0: <Embedded Controller: GPE 0x18> port 0x66,0x62 on acpi0
ACPI timer looks GOOD min = 2, max = 4, width = 2
ACPI timer looks GOOD min = 2, max = 2, width = 0
ACPI timer looks GOOD min = 2, max = 2, width = 0
ACPI timer looks GOOD min = 2, max = 2, width = 0
ACPI timer looks GOOD min = 2, max = 2, width = 0
ACPI timer looks GOOD min = 2, max = 2, width = 0
ACPI timer looks GOOD min = 2, max = 2, width = 0
ACPI timer looks GOOD min = 2, max = 2, width = 0
ACPI timer looks GOOD min = 2, max = 2, width = 0
ACPI timer looks GOOD min = 2, max = 2, width = 0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0
cpu0: <ACPI CPU (2 Cx states)> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_button0: <Sleep Button> on acpi0
acpi_button1: <Power Button> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
ACPI PCI link initial configuration:
\\_SB_.PCI0.ISA_.LNK8 irq  0: [ 3  4  5  6  7 10 11 12] 11+ low,level,sharable 0.2.0
\\_SB_.PCI0.ISA_.LNK4 irq  0: [ 3  4  5  6  7 10 11 12] 11+ low,level,sharable 0.15.0
\\_SB_.PCI0.ISA_.LNK7 irq  0: [ 3  4  5  6  7 10 11 12]  5+ low,level,sharable 0.8.0
\\_SB_.PCI0.ISA_.LNK1 irq  0: [ 3  4  5  6  7 10 11 12]  0+ low,level,sharable 0.10.0
\\_SB_.PCI0.ISA_.LNK3 irq  0: [ 3  4  5  6  7 10 11 12] 11+ low,level,sharable 0.11.0
\\_SB_.PCI0.ISA_.LNK2 irq  0: [ 3  4  5  6  7 10 11 12] 10+ low,level,sharable 0.19.0
\\_SB_.PCI0.ISA_.LNK2 irq  0: [ 3  4  5  6  7 10 11 12] 10+ low,level,sharable 0.12.0
\\_SB_.PCI0.ISA_.LNK3 irq  0: [ 3  4  5  6  7 10 11 12] 11+ low,level,sharable 0.12.1
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
	map[10]: type 3, range 32, base f8000000, size 26, enabled
	map[14]: type 3, range 32, base f4400000, size 12, enabled
	map[18]: type 4, range 32, base 00008090, size  2, port disabled
found->	vendor=0x1002, dev=0xcab0, revid=0x13
	bus=0, slot=0, func=0
	class=06-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x2230, cachelnsz=0 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1002, dev=0x700f, revid=0x01
	bus=0, slot=1, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0007, statreg=0x0220, cachelnsz=0 (dwords)
	lattimer=0x63 (2970 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns)
	map[10]: type 1, range 32, base f4004000, size 12, enabled
pcib0: matched entry for 0.2.INTA (src \\_SB_.PCI0.ISA_.LNK8)
pcib0: possible interrupts:  3  4  5  6  7 10 11 12
ACPI PCI link arbitrated settings:
\\_SB_.PCI0.ISA_.LNK3 (references 2, priority 6422):
	interrupts:	    11    10     5    12     7     6     4     3
	penalty:	    80    80   130  5080  5080  5080  5080  5080
\\_SB_.PCI0.ISA_.LNK2 (references 2, priority 6422):
	interrupts:	    11    10     5    12     7     6     4     3
	penalty:	    80    80   130  5080  5080  5080  5080  5080
\\_SB_.PCI0.ISA_.LNK8 (references 1, priority 3211):
	interrupts:	    11    10     5    12     7     6     4     3
	penalty:	    80    80   130  5080  5080  5080  5080  5080
\\_SB_.PCI0.ISA_.LNK4 (references 1, priority 3211):
	interrupts:	    11    10     5    12     7     6     4     3
	penalty:	    80    80   130  5080  5080  5080  5080  5080
\\_SB_.PCI0.ISA_.LNK7 (references 1, priority 3211):
	interrupts:	    11    10     5    12     7     6     4     3
	penalty:	    80    80   130  5080  5080  5080  5080  5080
\\_SB_.PCI0.ISA_.LNK1 (references 1, priority 3211):
	interrupts:	    11    10     5    12     7     6     4     3
	penalty:	    80    80   130  5080  5080  5080  5080  5080
pcib0: slot 2 INTA routed to irq 11 via \\_SB_.PCI0.ISA_.LNK8
found->	vendor=0x10b9, dev=0x5237, revid=0x03
	bus=0, slot=2, func=0
	class=0c-03-10, hdrtype=0x00, mfdev=0
	cmdreg=0x0017, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D3  current D0
found->	vendor=0x10b9, dev=0x1533, revid=0x00
	bus=0, slot=7, func=0
	class=06-01-00, hdrtype=0x00, mfdev=0
	cmdreg=0x000f, statreg=0x0210, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	powerspec 1  supports D0 D3  current D0
	map[10]: type 4, range 32, base 00008400, size  8, enabled
	map[14]: type 1, range 32, base f4005000, size 12, enabled
pcib0: matched entry for 0.8.INTA (src \\_SB_.PCI0.ISA_.LNK7)
pcib0: possible interrupts:  3  4  5  6  7 10 11 12
ACPI PCI link arbitrated settings:
\\_SB_.PCI0.ISA_.LNK3 (references 2, priority 6585):
	interrupts:	    10    11     5    12     7     6     4     3
	penalty:	   160   170   210  5160  5160  5160  5160  5160
\\_SB_.PCI0.ISA_.LNK2 (references 2, priority 6585):
	interrupts:	    10    11     5    12     7     6     4     3
	penalty:	   160   170   210  5160  5160  5160  5160  5160
\\_SB_.PCI0.ISA_.LNK4 (references 1, priority 3292):
	interrupts:	    10    11     5    12     7     6     4     3
	penalty:	   160   170   210  5160  5160  5160  5160  5160
\\_SB_.PCI0.ISA_.LNK7 (references 1, priority 3292):
	interrupts:	    10    11     5    12     7     6     4     3
	penalty:	   160   170   210  5160  5160  5160  5160  5160
\\_SB_.PCI0.ISA_.LNK1 (references 1, priority 3292):
	interrupts:	    10    11     5    12     7     6     4     3
	penalty:	   160   170   210  5160  5160  5160  5160  5160
pcib0: slot 8 INTA routed to irq 5 via \\_SB_.PCI0.ISA_.LNK7
found->	vendor=0x10b9, dev=0x5451, revid=0x02
	bus=0, slot=8, func=0
	class=04-01-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0003, statreg=0xc290, cachelnsz=0 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x18 (6000 ns)
	intpin=a, irq=5
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 1, range 32, base ffbfe000, size 12, enabled
found->	vendor=0x104c, dev=0xac50, revid=0x02
	bus=0, slot=10, func=0
	class=06-07-00, hdrtype=0x02, mfdev=0
	cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords)
	lattimer=0x80 (3840 ns), mingnt=0xc0 (48000 ns), maxlat=0x03 (750 ns)
	intpin=a, irq=255
	powerspec 1  supports D0 D1 D2 D3  current D0
	map[10]: type 4, range 32, base 00008800, size  8, enabled
	map[14]: type 1, range 32, base f4007800, size  8, enabled
pcib0: matched entry for 0.11.INTA (src \\_SB_.PCI0.ISA_.LNK3)
pcib0: possible interrupts:  3  4  5  6  7 10 11 12
ACPI PCI link arbitrated settings:
\\_SB_.PCI0.ISA_.LNK3 (references 2, priority 6747):
	interrupts:	    10    11     5    12     7     6     4     3
	penalty:	   240   250   300  5240  5240  5240  5240  5240
\\_SB_.PCI0.ISA_.LNK2 (references 2, priority 6747):
	interrupts:	    10    11     5    12     7     6     4     3
	penalty:	   240   250   300  5240  5240  5240  5240  5240
\\_SB_.PCI0.ISA_.LNK4 (references 1, priority 3373):
	interrupts:	    10    11     5    12     7     6     4     3
	penalty:	   240   250   300  5240  5240  5240  5240  5240
\\_SB_.PCI0.ISA_.LNK1 (references 1, priority 3373):
	interrupts:	    10    11     5    12     7     6     4     3
	penalty:	   240   250   300  5240  5240  5240  5240  5240
pcib0: slot 11 INTA routed to irq 11 via \\_SB_.PCI0.ISA_.LNK3
found->	vendor=0x10ec, dev=0x8139, revid=0x20
	bus=0, slot=11, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0013, statreg=0x0290, cachelnsz=16 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 1, range 32, base f4006000, size 12, enabled
pcib0: matched entry for 0.15.INTA (src \\_SB_.PCI0.ISA_.LNK4)
pcib0: possible interrupts:  3  4  5  6  7 10 11 12
ACPI PCI link arbitrated settings:
\\_SB_.PCI0.ISA_.LNK2 (references 2, priority 6912):
	interrupts:	    10    11     5    12     7     6     4     3
	penalty:	   320   350   380  5320  5320  5320  5320  5320
\\_SB_.PCI0.ISA_.LNK4 (references 1, priority 3456):
	interrupts:	    10    11     5    12     7     6     4     3
	penalty:	   320   350   380  5320  5320  5320  5320  5320
\\_SB_.PCI0.ISA_.LNK1 (references 1, priority 3456):
	interrupts:	    10    11     5    12     7     6     4     3
	penalty:	   320   350   380  5320  5320  5320  5320  5320
pcib0: slot 15 INTA routed to irq 11 via \\_SB_.PCI0.ISA_.LNK4
found->	vendor=0x10b9, dev=0x5237, revid=0x03
	bus=0, slot=15, func=0
	class=0c-03-10, hdrtype=0x00, mfdev=0
	cmdreg=0x0013, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D3  current D0
	map[20]: type 4, range 32, base 00008080, size  4, enabled
found->	vendor=0x10b9, dev=0x5229, revid=0xc4
	bus=0, slot=16, func=0
	class=01-01-fa, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns)
	intpin=a, irq=255
	powerspec 2  supports D0 D3  current D0
found->	vendor=0x10b9, dev=0x7101, revid=0x00
	bus=0, slot=17, func=0
	class=06-80-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0000, statreg=0x0200, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	map[10]: type 1, range 32, base f4007000, size 11, enabled
	map[14]: type 1, range 32, base f4000000, size 14, enabled
pcib0: matched entry for 0.19.INTA (src \\_SB_.PCI0.ISA_.LNK2)
pcib0: possible interrupts:  3  4  5  6  7 10 11 12
ACPI PCI link arbitrated settings:
\\_SB_.PCI0.ISA_.LNK2 (references 2, priority 7075):
	interrupts:	    10    11     5    12     7     6     4     3
	penalty:	   400   440   460  5400  5400  5400  5400  5400
\\_SB_.PCI0.ISA_.LNK1 (references 1, priority 3537):
	interrupts:	    10    11     5    12     7     6     4     3
	penalty:	   400   440   460  5400  5400  5400  5400  5400
pcib0: slot 19 INTA routed to irq 10 via \\_SB_.PCI0.ISA_.LNK2
found->	vendor=0x104c, dev=0x8023, revid=0x00
	bus=0, slot=19, func=0
	class=0c-00-10, hdrtype=0x00, mfdev=0
	cmdreg=0x0012, statreg=0x0210, cachelnsz=16 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D1 D2 D3  current D0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib1:   secondary bus     1
pcib1:   subordinate bus   1
pcib1:   I/O decode        0x9000-0x9fff
pcib1:   memory decode     0xf4100000-0xf41fffff
pcib1:   prefetched decode 0xf6000000-0xf7ffffff
ACPI PCI link initial configuration:
\\_SB_.PCI0.ISA_.LNK2 irq*10: [ 3  4  5  6  7 10 11 12] 10+ low,level,sharable 1.5.0
pci1: <ACPI PCI bus> on pcib1
pci1: physical bus=1
	map[10]: type 3, range 32, base f6000000, size 25, enabled
pcib1: device (null) requested decoded memory range 0xf6000000-0xf7ffffff
	map[14]: type 4, range 32, base 00009000, size  8, enabled
pcib1: device (null) requested decoded I/O range 0x9000-0x90ff
	map[18]: type 1, range 32, base f4100000, size 16, enabled
pcib1: device (null) requested decoded memory range 0xf4100000-0xf410ffff
pcib1: matched entry for 1.5.INTA (src \\_SB_.PCI0.ISA_.LNK2)
pcib1: slot 5 INTA is already routed to irq 10
found->	vendor=0x1002, dev=0x4336, revid=0x00
	bus=1, slot=5, func=0
	class=03-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0287, statreg=0x02b0, cachelnsz=16 (dwords)
	lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D1 D2 D3  current D0
acpi_video0: <ACPI video extension> port 0x9000-0x90ff mem 0xf4100000-0xf410ffff,0xf6000000-0xf7ffffff irq 10 at device 5.0 on pci1
found CRT monitor(100), detectable by BIOS, head #0
found LCD panel(110), detectable by BIOS, head #0
found TV(200), detectable by BIOS, head #0
pci0: <serial bus, USB> at device 2.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
pcm0: <Acer Labs M5451> port 0x8400-0x84ff mem 0xf4005000-0xf4005fff irq 5 at device 8.0 on pci0
pcm0: Reserved 0x100 bytes for rid 0x10 type 4 at 0x8400
pcm0: <Analog Devices AD1886A AC97 Codec (id = 0x41445363)>
pcm0: Codec features headphone, 6 bit master volume, Analog Devices Phat Stereo
pcm0: Primary codec extended features variable rate PCM, reserved 1
pcm0: [GIANT-LOCKED]
pcm0: sndbuf_setmap 216000, 1000; 0xc1582000 -> 216000
pcm0: sndbuf_setmap 1f4000, 1000; 0xc1580000 -> 1f4000
pcm0: sndbuf_setmap 1f2000, 1000; 0xc157e000 -> 1f2000
pcm0: sndbuf_setmap 1d0000, 1000; 0xc157c000 -> 1d0000
pcm0: sndbuf_setmap 22d000, 1000; 0xc1579000 -> 22d000
pci0: <bridge, PCI-CardBus> at device 10.0 (no driver attached)
re0: Reserved 0x100 bytes for rid 0x10 type 4 at 0x8800
re0: <RealTek 8139C+ 10/100BaseTX> port 0x8800-0x88ff mem 0xf4007800-0xf40078ff irq 11 at device 11.0 on pci0
miibus0: <MII bus> on re0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
re0: bpf attached
re0: Ethernet address: 00:08:02:d0:21:4e
re0: [MPSAFE]
pci0: <serial bus, USB> at device 15.0 (no driver attached)
atapci0: <AcerLabs Aladdin UDMA100 controller> port 0x8080-0x808f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 16.0 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x8080
ata0: channel #0 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata0-slave:  stat=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata0: [MPSAFE]
ata1: channel #1 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=50 ostat1=00
ata1-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1-slave:  stat=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: reset tp2 stat0=00 stat1=00 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER>
ata1: [MPSAFE]
pci0: <bridge, PCI-unknown> at device 17.0 (no driver attached)
pci0: <serial bus, FireWire> at device 19.0 (no driver attached)
acpi_acad0: <AC Adapter> on acpi0
acpi_cmbat0: <Control Method Battery> on acpi0
speaker0: <PC speaker> port 0x61 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0067
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
psm0: unable to allocate IRQ
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
psm0: current command byte:0067
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3-00, 3 buttons
psm0: config:00000000, flags:00000008, packet size:4
psm0: syncmask:08, syncbits:00
unknown: not probed (disabled)
unknown: not probed (disabled)
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0: <ECP parallel printer port> port 0x778-0x77f,0x378-0x37f irq 7 drq 1 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/15 bytes threshold
ppbus0: <Parallel port bus> on ppc0
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xe0000-0xe3fff,0xdf000-0xdffff,0xc0000-0xcefff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x700ff
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
vga0: vga: WARNING: video mode switching is not fully supported on this adapter
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 6f 4f 4f 93 53 9f 
9e 1f 00 4f 0d 0e 00 00 07 80 91 83 8f 28 1f 8f 
9f a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
EGA/VGA parameters to be used for mode 24
50 18 10 00 00 00 03 00 02 67 6f 4f 4f 93 53 9f 
9e 1f 00 4f 0d 0e 00 00 07 80 91 83 8f 28 1f 8f 
9f a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
sio0 failed to probe at port 0x3f8 irq 4 flags 0x10 on isa0
sio1 failed to probe at port 0x2f8 irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 1192626488 Hz quality 800
Timecounters tick every 10.000 msec
lo0: bpf attached
cpu0: set speed to 100.0%
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
acpi_acad0: acline initialization start
acpi_acad0: On Line
acpi_acad0: acline initialization done, tried 1 times
acpi_cmbat0: battery initialization start
acpi_ec0: info: new max delay is 20 us
acpi_cmbat0: battery initialization done, tried 1 times
ata0-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin
ata0-master: setting PIO4 on AcerLabs Aladdin chip
ata0-master: setting UDMA100 on AcerLabs Aladdin chip
ad0: <FUJITSU MHR2030AT/53BB> ATA-6 disk at ata0-master
ad0: 28615MB (58605120 sectors), 58140 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA100
GEOM: new disk ad0
ata1-slave: FAILURE - ATAPI_IDENTIFY status=1<ERROR> error=4<ABORTED> LBA=0
ata1-slave: FAILURE - ATAPI_IDENTIFY status=1<ERROR> error=4<ABORTED> LBA=0
ata1-master: pio=0x0c wdma=0x22 udma=0xffffffff cable=40pin
ata1-master: setting PIO4 on AcerLabs Aladdin chip
acd0: <Compaq DVD-ROM GDR-8081N/0009> DVDROM drive at ata1 as master
acd0: read 1722KB/s (4134KB/s), 512KB buffer, PIO4
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
acd0: Writes:
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
[0] f:80 typ:7 s(CHS):0/1/1 e(CHS):1023/2/63 s:63 l:12289662
[1] f:00 typ:165 s(CHS):1023/255/63 e(CHS):1023/15/63 s:29302560 l:29302560
[2] f:00 typ:165 s(CHS):1023/255/63 e(CHS):1023/15/63 s:12289725 l:17012835
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad0s1, start 32256 length 6292306944 end 6292339199
GEOM: Configure ad0s2, start 15002910720 length 15002910720 end 30005821439
GEOM: Configure ad0s3, start 6292339200 length 8710571520 end 15002910719
GEOM: Configure ad0s2a, start 0 length 268435456 end 268435455
GEOM: Configure ad0s2b, start 268435456 length 380936192 end 649371647
GEOM: Configure ad0s2c, start 0 length 15002910720 end 15002910719
GEOM: Configure ad0s2d, start 649371648 length 268435456 end 917807103
GEOM: Configure ad0s2e, start 917807104 length 268435456 end 1186242559
GEOM: Configure ad0s2f, start 1186242560 length 13816668160 end 15002910719
GEOM: Configure ad0s3c, start 0 length 8710571520 end 8710571519
GEOM: Configure ad0s3d, start 0 length 8710571520 end 8710571519
Mounting root from ufs:/dev/ad0s2a
start_init: trying /sbin/init

--GvXjxJ+pjyke8COw--



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20041030214258.GB60781>