Date: Fri, 18 Oct 2002 08:35:10 -0700 From: Nathan Kinkade <nkinkade@dsl-only.net> To: freebsd-questions@freebsd.org Subject: Re: Top not showing correct CPU utilization Message-ID: <20021018153510.GB36930@sub21-156.member.dsl-only.net> In-Reply-To: <20021018045345.E71AC3C35@sitemail.everyone.net> References: <20021018045345.E71AC3C35@sitemail.everyone.net>
next in thread | previous in thread | raw e-mail | index | archive | help
On Thu, Oct 17, 2002 at 09:53:45PM -0700, Elite Scholar wrote: > Environment > FreeBSD mybox.com 4.7-STABLE FreeBSD 4.7-STABLE #2: Sun Oct 13 16:41:48 PDT 2002 scholar@mybox.com:/usr/obj/usr/src/sys/MYKERNEL i386 > > Description > Built and installed custom kernel. All seemed to have gone well except when I run "top". It always shows 0.00% Utilized. I know that setiathome should be showing 90's + utilization. The weird part about this is that I did a "shutdown now" and I cut power to my box too early. Then when I turned mybox back up "top" was working again. When I did a dmesg to see what happened. I saw an error stating that "/" was improperly unmounted. So I figured that it's fixed but to make sure I did a "shutdown -r now" to see if it happens again. And sure enough.. Back to 0.00% Utilization. Any help would be appreciated. > > last pid: 220; load averages: 1.00, 0.97, 0.78 up 0+00:24:06 21:19:32 > 31 processes: 2 running, 29 sleeping > CPU states: 0.0% user, 0.0% nice, 0.0% system, 0.0% interrupt, 0.0% idle > Mem: 33M Active, 14M Inact, 16M Wired, 60K Cache, 15M Buf, 61M Free > Swap: 241M Total, 241M Free > > PID USERNAME PRI NICE SIZE RES STATE TIME WCPU CPU COMMAND > 149 nobody 48 10 16556K 15380K RUN 22:55 0.00% 0.00% setiathome <snip> How did you upgrade your machine? Did you download ALL system sources and do a `make buildword -> make buildkernel -> make installkernel -> reboot -> make installworld'? I'm not sure if this is your problem, but frequently when problems like this are aired on the list it turns out to be a problem related to userland code being out of sync with the kernel code. Verify that all your sources are up to date. Nathan To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20021018153510.GB36930>